Scribd
Upload
98 views1 page

Bolt Capacities for S275 Steel

This document provides bolt capacities for non-preloaded ordinary bolts made of S275 steel. [1] It includes the tensile stress area, tensile capacity, shear capacity, and bearing capacity for bolts of various diameters from 6mm to 30mm and grades 4.6 and 8.8. [2] Notes provide additional information on clearance hole sizes, how the tension capacities account for prying forces, and multiplication factors to apply if oversized or slotted holes are used. [3] Shear capacities may also need reduction for large packings, grip lengths, or long joints.

Uploaded by

Jay Senjalia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views1 page

Bolt Capacities for S275 Steel

This document provides bolt capacities for non-preloaded ordinary bolts made of S275 steel. [1] It includes the tensile stress area, tensile capacity, shear capacity, and bearing capacity for bolts of various diameters from 6mm to 30mm and grades 4.6 and 8.8. [2] Notes provide additional information on clearance hole sizes, how the tension capacities account for prying forces, and multiplication factors to apply if oversized or slotted holes are used. [3] Shear capacities may also need reduction for large packings, grip lengths, or long joints.

Uploaded by

Jay Senjalia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Structural Steel 259

Selected ultimate bolt capacities for non-pre-loaded ordinary bolts in


S275 steel

Diameter Tensile Tension Shear Bearing capacity for end distance ¼ 2f


of bolt, f stress capacity capacity kN
mm area kN
mm2 Single Double Thickness of steel passed through mm
kN kN
5 6 8 10 12 15 20
Grade 4.6
6 20.1 3.9 3.2 6.4 13.8 16.6 22.1 27.6 33.1 41.4 55.2
8 36.6 7.0 5.9 11.7 18.4 22.1 29.4 36.8 44.2 55.2 73.6
10 58 11.1 9.3 18.6 23.0 27.6 36.8 46.0 55.2 69.0 92.0
12 84.3 16.2 13.5 27.0 27.6 33.1 44.2 55.2 66.2 82.8 110.4
16 157 30.1 25.1 50.2 36.8 44.2 58.9 73.6 88.3 110.4 147.2
20 245 47.0 39.2 78.4 46.0 55.2 73.6 92.0 110.4 138.0 184.0
24 353 67.8 56.5 113.0 55.2 66.2 88.3 110.4 132.5 165.6 220.8
30 561 107.7 89.8 179.5 69.0 82.8 110.4 138.0 165.6 207.0 276.0

Grade 8.8
6 20.1 9.0 7.5 15.1 13.8 6.6 22.1 27.6 33.1 41.4 55.2
8 36.6 16.4 13.7 27.5 18.4 22.1 29.4 36.8 44.2 55.2 73.6
10 58 26.0 21.8 43.5 23.0 27.6 36.8 46.0 55.2 69.0 92.0
12 84.3 37.8 31.6 63.2 27.6 33.1 44.2 55.2 66.2 82.8 110.4
16 157 70.3 58.9 117.8 36.8 44.2 58.9 73.6 88.3 110.4 147.2
20 245 109.8 91.9 183.8 46.0 55.2 73.6 92.0 110.4 138.0 184.0
24 353 158.1 132.4 264.8 55.2 66.2 88.3 110.4 132.5 165.6 220.8
30 561 251.3 210.4 420.8 69.0 82.8 110.4 138.0 165.6 207.0 276.0

NOTES:
. 2 mm clearance holes for f < 24 or 3 mm clearance holes for f < 24.
. Tabulated tension capacities are nominal tension capacity ¼ 0.8A p which accounts for prying forces.
t t
. Bearing values shown in bold are less than the single shear capacity of the bolt.

. Bearing values shown in italic are less than the double shear capacity of the bolt.
. Multiply tabulated bearing values by 0.7 if oversized or short slotted holes are used.
. Multiply tabulated bearing values by 0.5 if kidney shaped or long slotted holes are used.
. Shear capacity should be reduced for large packing, grip lengths or long joints.

You might also like