BPS TESTING LABORATORY

Matrix
Testing Duration (as Documentary and
Succeeding Processing
Product testing of Testing Procedures as per Testing Fees No. of Samples required by the other
Amount time
standard) requirements

Physical/ Mechanical Laboratory:

1. Rubber Inner Tube PNS 34:2000/
2,500.00 2,000.00 1 pc. 7h 15min 6 days Request for Test
ISO 37:2000
2. Steel Wire Nails PNS 136:2000 1,000.00 800 15 pcs/size 7h 15min 4 days Request for Test
3. uPVC Sewer Pipes PNS 1950:2003 2,000.00 3 pcs/size
4. uPVC Pipes for Potable Water PNS 65:1933 7,000.00 3 pcs/size
PNS 14:1983 Amd.
5. uPVC Electrical Conduit/ corrugated 4,600.00 3 pcs/size
01:1987
6. PE Pipes for Potable Water PNS/ISO 4427:2002 1,800.00 3 pcs/size
7. PB Pipes for Potable Water PNS 152:2003 1,200.00 3 pcs/size
8. B.I. Pipes/ G.I. Pipe PNS 26:2003 1,140.00 3 pcs/size

Physical Test - 730.00x5 samples =

3,650.00 (10mm, Grade 230 up to
36mm, Grade 230 only)
9. Steel Bars ‐ Deformed Steel Bars PNS 49:2002 6pcs/size
Chemical Test ‐ (1 sample only) =
3,550.00
Total = 7,200.00
Physical Test Only ‐ 730x5 samples
10. Steel Bars ‐ Rerolled Steel Bars PNS 211:2002 5pcs/size
= 3,650
Physical Test - 1,060x5 samples =
5,300.00 (For Samples 55mm-
150mm Leg Length x 5.5mm and
above Thickness)
Note: Machining of test specimen
not included; due to equipment
6pcs/size
constraints, BPSTL accepts
prepared test specimens/samples
only
11. Equal Leg Angle Bars PNS 657:2008
Chemical Test ‐ (1 sample only) =
3,550.00
Total = 8,850.00
Physical Test - 875x5 samples =
4,375.00 (For 50mm and below x 5
and below Thickness)
6pcs/size
Chemical Test ‐ (1 sample only) =
3,550.00
Total = 7,925.00
9000.00 (lower than 20cm x 20cm
30/size ‐ Unglazed,
12. Ceramic Tiles PNS ISO 13006:2019 and highter than 120cm x 120cm
41/size ‐ Glazed
can't be tested)

Wiring Devices:
Testing Duration (as Documentary and
Succeeding Processing
Product testing of Testing Procedures as per Testing Fees No. of Samples required by the other
Amount time
standard) requirements
1. Plugs/ Socket PNS 1486‐1:1996 5,800.00
2. Receptacle/ Outlet 6,400.00
3. Enclosed Switch‐ Knife PNS 117,118,119:1988 8,500.00 8,000.00 2 pcs 7h 15 min 12 days Request for Test
PNS 13:1983/
4. Electrical Cartridge Fuse/ Fuse Holder 3,500.00 3,000.00 10 pcs 7h 15 min 7 days Request for Test
PNS 56:1996
5. Moulded Case Circuit Breaker PNS 519:1991 12,000.00 8,000.00 3 pcs
6. Extension Cord PNS 1486:1996/ PNS 163 9,400.00

7. Switches for household and similar PNS 1485:1996/ PNS 57 5,900.00 7h 15 min 14 days Request for Test
fixed electrical installations
PNS 57 7h 15 min 14 days Request for Test
8. PVC Electrical Tape PNS 79:1992 3,500.00 2,800.00 10 pcs/size/color 7h 15 min 4 days Request for Test

*** Provide 10 pcs any model for chemical Analysis of Copper for the ff: samples:
(switches, extension cord, socket outlet)***

Appliances Laboratory:
Testing Duration (as Documentary and
Succeeding Processing
Product testing of Testing Procedures as per Testing Fees No. of Samples required by the other
Amount time
standard) requirements
1. Electric Flat Iron PNS 254:1994 12,000.00 8,000.00 2 spls 7h 15min 9 days Request for Test
2. Electric Rice Cooker PNS 255:1996 12,000.00 8,000.00 2 spls 7h 15min 9 days Request for Test
3. Electric Fan PNS IEC 60335‐2‐80 16,000.00 14,000.00 3 spls

PNS 255:1996 12,000.00 8,000.00 2 spls 7h 15min 9 days

4. Electric Air Pot Request for Test

Request for Test,
for toaster 2 loaf
5. Grill/ Toaster PNS/ IEC 60335‐2‐9 12,000.00 8,000.00 2 spls 7h 15min 12 days
of bread
(100x100x10mm)
6. Washing Machine PNS/IEC 60335‐2‐4 30,000.00 25,000.00 2 spls 7h 15min 15 days Request for Test
 20,000.00 18,000.00 7h 15min 15 days

7. Spin Extractor/ Dryer Request for Test

Request for Test,
test load (at least
10 kg per size
8. Electric Blender PNS/IEC 60335‐2‐14 15,000.00 13,000.00 2 spls 7h 15min 12 days
depending on the
capacity of the
appliance)
9. Refrigator PNS IEC 60335‐2‐24 25,000.00 23,000.00 1 spls
Request for Test,
circuit diagram,
Certificates of
10. Television Set PNS IEC 60065 6th ed. 40,000.00 36,000.00 2 spls 7h 15min 15 days
critical
components, spare
parts
circuit diagram,
Certificates of
11. DVD/ VCD PNS/IEC 60065:2007 25,000.00 20,000.00 2 spls 7h 15min 10 days
critical
components, spare

Request for Test, 2

12. Microwave Oven PNS IEC 60335‐2‐25 30,000.00 28,000.00 2 spls 7h 15min 15 days
potatoes (at least
40x140mm x and y
axis)
Request for Test,
circuit diagram,
Certificates of
13. LCD TV 40,000.00 36,000.00 2 spls 7h 15min 15 days
critical
components, spare
parts
14. Verification Test****** 8,000.00 5,000.00
15. EMI Test for*****
Disturbance Voltage Measurement 25,000.00 23,800.00
Disturbance Power Measurement 25,000.00 23,700.00
Click Measurement 25,000.00 23,800.00

Lamps and Related Devices:

Testing Duration (as Documentary and
Succeeding Processing
Product testing of Testing Procedures as per Testing Fees No. of Samples required by the other
Amount time
standard) requirements
1. Magnetic Ballast‐ Safety PNS IEC 61347‐2‐8:2002 9,000.00 7,000.00 6 safety 7h 15min 11 days Request for Test
Performance PNS IEC 60921:2002 5,000.00 4,000.00 6 performance
3,500.00 2,000.00
2. Electronic Ballast‐ Safety PNS IEC 61347‐2‐3:2002 12,000.00 10,000.00 6 safety 7h 15min 12 days Request for Test
Performance PNS IEC 60929:2002 8,000.00 7,000.00 6 performance
5,000.00 3,000.00
PNS 603‐1:1993
3. Self Ballasted Lamps‐ Safety 10,000.00 8,000.00 7h 15min 9 days Request for Test
PNS IEC 968:2006
Performance PNS IEC 969:2006 8,000.00 6,000.00
Total=18,000.00
4. Flourescent Lampholders/ starter holder PNS 42:1997 6,000.00 5,000 10 pcs 7h 15min 6 days Request for Test
5. Edison Screw Lampholder PNS 80:1997 8,000.00 6,000.00 10 pcs 7h 15min 6 days Request for Test
6. Luminaires PNS 1328:1996 12,000.00 8,500.00 3 sets 7h 15min 16 days Request for Test
7. Flourescent Lamp Starters PNS 45:1997 8,000.00 7,000 30 pcs 7h 15min 11 days Request for Test
8. Lighting Sets PNS 189:2000 8,000.00 6,000.00 5 sets 7h 15min 9 days Request for Test
9. LED Modules 7,500.00 6,000.00 7h 15min 9 days Request for Test
10. LED Equipment 6,500.00 5,000.00 7h 15min 9 days Request for Test
11. Incandescent Lamps: 30 pcs
(10,15,25 W) PNS 38‐1 & 2:1995 12,500.00 7h 15min 6 days Request for Test
(40,50 W) PNS 38‐2:1995 14,300.00 7h 15min 6 days Request for Test
(60,75,100 W) PNS 38‐2:1995 17,800.00 7h 15min 6 days Request for Test
Testing Fee Overall 12,000.00
12. Tubular/ Circular Flourescent Lamps 30 pcs
(10,15,25 W) PNS IEC 61195:2001 9,700.00 7h 15min 10 days Request for Test
(40,50 W) PNS IEC 61199:2006 10,900.00 7h 15min 10 days Request for Test
(60,75,100 W) 10,000.00 7h 15min 10 days Request for Test
12,800.00
Testing Fee Overall 16,000.00

Chemical Laboratory:
Testing Duration (as Documentary and
Succeeding Processing
Product testing of Testing Procedures as per Testing Fees No. of Samples required by the other
Amount time
standard) requirements
1. Fire Extinguisher: Dry Chemical PNS 15 Part 1:1989 2,500.00 1 cylinder 7h 15min 90 days Request for Test
MAP half kilo 7h 15min 3 days Request for Test
AFFF PNS 15 Part 4:1991 2,000.00 1 cylinder 7h 15min 3 days Request for Test
Foam Concentrate 1 liter
 CO2 PNS 15 Part 3:1991 2,000.00 1 cyl ‐ PS 7h 15min 3 days Request for Test
2 cyl ‐ ICC 7h 15min 3 days Request for Test
Halon Substitute PNS 15 Part 5:1991 2,000.00 1 cyl ‐ PS 7h 15min 3 days Request for Test
2 cyl ‐ ICC 7h 15min 3 days Request for Test
HCFC/ HFC 236 fa PNS 15 Part 5:1991 2,000.00 1 cyl ‐ PS 7h 15min 3 days Request for Test
2 cyl ‐ ICC 7h 15min 3 days Request for Test
2. Safety Matches PNS 09 Part 01:2000 4,000.00 3,000.00 100 pcs/model 7h 15min 6 days Request for Test
3. Lighters PNS 47:1998 4,000.00 3,000.00 100 pcs/model 7h 15min 5 days Request for Test
4. Dentrifice PNS 246:1990 850.00 10 pcs
5. Zinc Carbon cylindrical cell‐battery PNS 08:1995 2,000.00 1,500.00 15 pcs 7h 15min 5 days Request for Test

Wires & Cables

Testing Duration (as Documentary and
Succeeding Processing
Product testing of Testing Procedures as per Testing Fees No. of Samples required by the other
Amount time
standard) requirements
1. Aluminum Cable (ACSR) Class A ASTM B 232/232 M 8,000.00 7,500.00 10 mts 7h 15min 10 days Request for Test
2. Aluminum Cable 1350 ASTM B 231/231 M 2,000.00 1,500.00 10 mts 7h 15min 7 days Request for Test
3. Aluminum Cable ACSR/poly ASTM B 232/232 M 2,500.00 2,000.00 10 mts 7h 15min 5 days Request for Test
4. Aluminum Cable ASSR Class AA ASTM B 232/232 M 2,300.00 2,000.00 10 mts 7h 15min 7 days Request for Test
5. Flexible Cords PNs 163:1994 10,000.00 7,500.00 2 spools (300 mts) 7h 15min 10 days Request for Test
6. Thermoplastic Wires (bldg wires) PNS 35:2004 13,000.00 11,000.00 3 boxes (300 mts) 7h 15min 10 days Request for Test
7. Magnet Wires PNS 106‐110:1987 7,000.00 6,000.00 2 spools (300 mts) 7h 15min 10 days Request for Test
8.Telephone Dropwire/ Jumper Wire As per Test parameters 2,500.00 2,000.00 20 mts 7h 15min 8 days Request for Test
9. Telephone Jacketed Wire As per Test parameters 2,500.00 2,000.00 20 mts 7h 15min 8 days Request for Test
10. Low Voltage Cable As per Test parameters 6,000.00 4,000.00 2 boxes 7h 15min 10 days Request for Test

TOTAL No. OF PRODUCTS = 60

Note: The current total manpower of PTD is 16 (12 testing staff, 3 admin staff and 1 manager/OIC). The testing duration specified above is on the premise that not all samples are received all at the same
time