PD -93906D

AUTOMOTIVE MOSFET
Typical Applications
l l

IRFP2907
HEXFET Power MOSFET
D

Integrated Starter Alternator 42 Volts Automotive Electrical Systems Advanced Process Technology Ultra Low On-Resistance Dynamic dv/dt Rating 175C Operating Temperature Fast Switching Repetitive Avalanche Allowed up to Tjmax
G

VDSS = 75V RDS(on) = 4.5m

Benefits
l l l l l l

ID = 209A

Description

Specifically designed for Automotive applications, this Stripe Planar design of HEXFET Power MOSFETs utilizes the lastest processing techniques to achieve extremely low on-resistance per silicon area. Additional features of this HEXFET power MOSFET are a 175C junction operating temperature, fast switching speed and improved repetitive avalanche rating. These benefits combine to make this design an extremely efficient and reliable device for use in Automotive applications and a wide variety of other applications.

TO-247AC
G D S

Absolute Maximum Ratings

Parameter
ID @ TC = 25C ID @ TC = 100C IDM PD @TC = 25C VGS EAS IAR EAR dv/dt TJ TSTG Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting Torque, 6-32 or M3 screw

Gate

Drain
Max.
209 148 840 470 3.1 20 1970 See Fig.12a, 12b, 15, 16 5.0 -55 to + 175 300 (1.6mm from case ) 10 lbfin (1.1Nm)

Source
Units
A W W/C V mJ A mJ V/ns C

Thermal Resistance
Parameter
RJC RCS RJA Junction-to-Case Case-to-Sink, Flat, Greased Surface Junction-to-Ambient

Typ.
0.24

Max.
0.32 40

Units
C/W

www.irf.com

1
08/08/11

IRFP2907
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
V(BR)DSS
V(BR)DSS/TJ

RDS(on) VGS(th) gfs IDSS IGSS Qg Qgs Qgd td(on) tr td(off) tf LD LS Ciss Coss Crss Coss Coss Coss eff.

Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance Internal Source Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse RecoveryCharge Forward Turn-On Time

Min. 75 2.0 130

Typ. 0.085 3.6 410 92 140 23 190 130 130 5.0 13

13000 2100 500 9780 1360 2320

Max. Units Conditions V VGS = 0V, ID = 250A V/C Reference to 25C, ID = 1mA 4.5 m VGS = 10V, ID = 125A 4.0 V VDS = 10V, ID = 250A S VDS = 25V, ID = 125A 20 VDS = 75V, VGS = 0V A 250 VDS = 60V, VGS = 0V, TJ = 150C 200 VGS = 20V nA -200 VGS = -20V 620 ID = 125A 140 nC VDS = 60V 210 VGS = 10V VDD = 38V ID = 125A ns RG = 1.2 VGS = 10V D Between lead, 6mm (0.25in.) nH G from package and center of die contact S VGS = 0V pF VDS = 25V = 1.0MHz, See Fig. 5 VGS = 0V, VDS = 1.0V, = 1.0MHz VGS = 0V, VDS = 60V, = 1.0MHz VGS = 0V, VDS = 0V to 60V

Source-Drain Ratings and Characteristics

Min. Typ. Max. Units IS
ISM

VSD trr Qrr ton Notes:

Conditions D MOSFET symbol 209 showing the A G integral reverse 840 S p-n junction diode. 1.3 V TJ = 25C, IS = 125A, VGS = 0V 140 210 ns TJ = 25C, IF = 125A 880 1320 nC di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)

Repetitive rating; pulse width limited by

max. junction temperature. (See fig. 11). Starting TJ = 25C, L = 0.25mH RG = 25, IAS = 125A. (See Figure 12). ISD 125A, di/dt 260A/s, VDD V(BR)DSS, TJ 175C Pulse width 400s; duty cycle 2%.

Coss eff. is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% VDSS . Calculated continuous current based on maximum allowable junction temperature. Package limitation current is 90A. Limited by T Jmax , see Fig.12a, 12b, 15, 16 for typical repetitive avalanche performance.

www.irf.com

IRFP2907
1000
VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP

1000

I D , Drain-to-Source Current (A)

100

I D , Drain-to-Source Current (A)

VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP

100

10

4.5V

4.5V

1 0.1

20s PULSE WIDTH TJ = 25 C

1 10 100

10 0.1

20s PULSE WIDTH TJ = 175 C

1 10 100

VDS , Drain-to-Source Voltage (V)

VDS , Drain-to-Source Voltage (V)

Fig 1. Typical Output Characteristics

Fig 2. Typical Output Characteristics

1000

3.0

RDS(on) , Drain-to-Source On Resistance (Normalized)

ID = 209A

I D , Drain-to-Source Current (A)

TJ = 175 C

2.5

100

2.0

TJ = 25 C

1.5

10

1.0

0.5

1 4.0

V DS = 25V 20s PULSE WIDTH 5.0 6.0 7.0 8.0 9.0 10.0

0.0 -60 -40 -20 0

VGS = 10V
20 40 60 80 100 120 140 160 180

VGS , Gate-to-Source Voltage (V)

TJ , Junction Temperature ( C)

Fig 3. Typical Transfer Characteristics

Fig 4. Normalized On-Resistance Vs. Temperature

www.irf.com

IRFP2907
20000

20

VGS , Gate-to-Source Voltage (V)

16000

VGS = 0V, f = 1 MHZ Ciss = C + Cgd, C gs ds SHORTED Crss = C gd Coss = C + Cgd ds

ID = 125A VDS = 60V VDS = 37V

16

C, Capacitance(pF)

Ciss

12000

12

8000

4000

Coss Crss
1 10 100

FOR TEST CIRCUIT SEE FIGURE 13

0 100 200 300 400 500 600 700

VDS, Drain-to-Source Voltage (V)

QG , Total Gate Charge (nC)

Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage

Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage

1000

10000
OPERATION IN THIS AREA LIMITED BY RDS(on)

ISD , Reverse Drain Current (A)

ID, Drain-to-Source Current (A)

100

TJ = 175 C

1000

100

100sec

10

10

1msec

TJ = 25 C
1

0.1 0.0

V GS = 0 V
0.5 1.0 1.5 2.0 2.5 3.0

Tc = 25C Tj = 175C Single Pulse 0.1 1 10

10msec DC

0.1 100 1000 VDS, Drain-to-Source Voltage (V)

VSD ,Source-to-Drain Voltage (V)

Fig 7. Typical Source-Drain Diode Forward Voltage

Fig 8. Maximum Safe Operating Area

www.irf.com

IRFP2907
240

LIMITED BY PACKAGE
200

VDS VGS RG 10V

Pulse Width 1 s Duty Factor 0.1 %

RD

D.U.T.
+

ID , Drain Current (A)

160

-VDD

120

80

Fig 10a. Switching Time Test Circuit

VDS 90%

40

25

50

TC , Case Temperature ( C)

75

100

125

150

175

Fig 9. Maximum Drain Current Vs. Case Temperature

10% VGS
td(on) tr t d(off) tf

Fig 10b. Switching Time Waveforms

1
Thermal Response ( Z thJC ) C/W

0.1

D = 0.50 0.20 0.10

0.01

0.05 0.02 0.01 SINGLE PULSE ( THERMAL RESPONSE )

0.001

Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.0001 0.001 0.01 0.1

0.0001 1E-006

1E-005

t1 , Rectangular Pulse Duration (sec)

Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case

www.irf.com

IRFP2907
EAS , Single Pulse Avalanche Energy (mJ)
15V

5000

VDS

DRIVER

4000

ID 51A 88A BOTTOM 125A TOP

RG
20V

D.U.T
IAS tp

+ - VDD

3000

0.01

2000

Fig 12a. Unclamped Inductive Test Circuit

V(BR)DSS tp

1000

25

50

75

100

125

150

175

Starting TJ , Junction Temperature ( C)

I AS

Fig 12b. Unclamped Inductive Waveforms

QG

Fig 12c. Maximum Avalanche Energy Vs. Drain Current

10 V

QGS

QGD

4.0

VG
VGS(th) , Variace ( V )

3.5

3.0

Charge

ID = 250A
2.5

Fig 13a. Basic Gate Charge Waveform

Current Regulator Same Type as D.U.T.

2.0

50K 12V .2F .3F

1.5
D.U.T. + V - DS

1.0 -75 -50 -25 0 25 50 75 100 125 150 175

VGS
3mA

T J , Temperature ( C )
IG ID

Current Sampling Resistors

Fig 13b. Gate Charge Test Circuit

Fig 14. Threshold Voltage Vs. Temperature

www.irf.com

IRFP2907
1000

Duty Cycle = Single Pulse

Avalanche Current (A)

100

0.01

Allowed avalanche Current vs avalanche pulsewidth, tav assuming Tj = 25C due to avalanche losses

0.05 0.10
10

1 1.0E-08 1.0E-07 1.0E-06 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01

tav (sec)

Fig 15. Typical Avalanche Current Vs.Pulsewidth

2000

EAR , Avalanche Energy (mJ)

1600

TOP Single Pulse BOTTOM 10% Duty Cycle ID = 125A

1200

800

400

0 25 50 75 100 125 150

Starting T J , Junction Temperature (C)

Notes on Repetitive Avalanche Curves , Figures 15, 16: (For further info, see AN-1005 at www.irf.com) 1. Avalanche failures assumption: Purely a thermal phenomenon and failure occurs at a temperature far in excess of T jmax. This is validated for every part type. 2. Safe operation in Avalanche is allowed as long asT jmax is not exceeded. 3. Equation below based on circuit and waveforms shown in Figures 12a, 12b. 4. PD (ave) = Average power dissipation per single avalanche pulse. 5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. Iav = Allowable avalanche current. 7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as 25C in Figure 15, 16). tav = Average time in avalanche. 175 D = Duty cycle in avalanche = tav f ZthJC(D, tav ) = Transient thermal resistance, see figure 11) PD (ave) = 1/2 ( 1.3BVIav) = DT/ ZthJC Iav = 2DT/ [1.3BVZth] EAS (AR) = PD (ave)tav

Fig 16. Maximum Avalanche Energy Vs. Temperature

www.irf.com

IRFP2907
Peak Diode Recovery dv/dt Test Circuit
D.U.T*

Circuit Layout Considerations Low Stray Inductance Ground Plane Low Leakage Inductance Current Transformer

RG VGS dv/dt controlled by RG ISD controlled by Duty Factor "D" D.U.T. - Device Under Test

+ VDD

Reverse Polarity of D.U.T for P-Channel

Driver Gate Drive P.W. Period D=

P.W. Period

[VGS=10V ] ***
D.U.T. ISD Waveform Reverse Recovery Current Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt

[VDD]

Re-Applied Voltage Inductor Curent

Body Diode

Forward Drop

Ripple 5%

[ISD ]

*** VGS = 5.0V for Logic Level and 3V Drive Devices Fig 17. For N-channel HEXFET power MOSFETs

www.irf.com

IRFP2907
Dimensions are shown in millimeters (inches)

TO-247AC Package Outline

TO-247AC Part Marking Information

EXAMPLE: T HIS IS AN IRFPE30 WITH AS SEMBLY LOT CODE 5657 AS S EMBLED ON WW 35, 2001 IN THE AS SEMBLY LINE "H" Note: "P" in as s embly line pos ition indicates "Lead-Free" INTERNAT IONAL RECT IFIER LOGO AS S EMBLY LOT CODE PART NUMBER
IRFPE30
56 135H 57

DATE CODE YEAR 1 = 2001 WEEK 35 LINE H

TO-247AC package is not recommended for Surface Mount Application. Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ Data and specifications subject to change without notice. This product has been designed and qualified for the Automotive[Q101] market. Qualification Standards can be found on IRs Web site.

IR WORLD HEADQUARTERS: 101N.Sepulveda Blvd, El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 08/2011

www.irf.com