Scribd
Upload
186 views1 page

Check Sheet Inspection: Position Actual Dimension Remark Drawing / Sketch

The document is a check sheet inspection report for a flange part from PT. Chevron Pacific Indonesia. It inspects 13 pieces out of a total order of 215 pieces. The inspection checks the part's dimensions against its drawing specifications, including the outside diameter of the flange, diameter of the bolt circle, facing diameter, diameter of bolt holes, flange thickness, facing thickness, and number of bolt holes. The inspection finds the part dimensions to be within specification.

Uploaded by

Jovianto Prisila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
186 views1 page

Check Sheet Inspection: Position Actual Dimension Remark Drawing / Sketch

The document is a check sheet inspection report for a flange part from PT. Chevron Pacific Indonesia. It inspects 13 pieces out of a total order of 215 pieces. The inspection checks the part's dimensions against its drawing specifications, including the outside diameter of the flange, diameter of the bolt circle, facing diameter, diameter of bolt holes, flange thickness, facing thickness, and number of bolt holes. The inspection finds the part dimensions to be within specification.

Uploaded by

Jovianto Prisila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

DOC.

NO FM-QCC-004

CHECK SHEET INSPECTION


REV. NO 01
REV. DATE 17 January, 2019

PT. DFFI PAGE of

Customer : PT. CHEVRON PACIFIC INDONESIA Part No. : 5 Inspection by : Firman Ibnu / Sofyan Doni
Job No. : 90471 R2WHDRI Dwg No. : - Inspection Report : Final Inspection
Total Qty : 215 pcs Material : ASTM A105 Heat Number : D19112
Qty Insp. : 13 pcs Inspection Level
: GEN II-E, 1.0
(ISO 2859-1:1999)
Part Name : Standard
Meas. Actual Dimension
BL 3" 300# RF Item No. Position Remark
Device Nominal Tol
(ASME B16.5)
Drawing / Sketch : MTC No V
Visual V

ft D Outside Diameter OF Flange VC 210mm -

K Diameter of Bolt Circle VC 168,3mm ±1,5mm

G Facing Diameter VC 127mm ±1,0mm

L Diameter of Bolt Holes VC 22,22mm -

+3.0mm
B Flange Thickness VC 27mm
-0.0mm

ft Facing Thickness VC 2mm -

- Number of Bolt Holes V 8 -

NOTE :
Measuring tool used : Inspected by Reviewed by
-V = Visual - HG = Height Gauge -SR = Steel Ruller
- VC = Vernier Caliper - BP = Bevel Protactor
- UT = Ultrasonic Thickness
Date : Date :

You might also like