ONU Configuration for Data and Voice Services
IM-Net
IMPLEMENTATION GUIDEBOOK
Version: 0.0
Prepared By:
24th Jan 2019
One Cloud Company Limited
This document contains proprietary information intended to be provided to IM-Net. It should not be released to third parties or used for other
purposes without the express written consent of One Cloud Company Limited
[Author] 1
Step1.Data Service Configuration
Login into ONU by browser and then type username and password.
Go to LAN and click all LAN interface for data.
And then click Apply
Step 2. DHCP Configuration for Users
Click DHCP Server Configuration and then Set up Network IP range and DNS server and Click Apply
[Author] 2
Step 3. Upstream Interface Configuration for Data Service
Go to WAN > WAN Configuration > New
Mark for Enable WAN
Choose PPPoE for Encapsulation Mode and then Route WAN for WAN Mode.
then mark Enable VLAN and type 10 for VLAN ID.
And then fill User Name and Password.
Next is Binding Option. Bind all interfaces including wireless SSID1 for users
And Click Apply.
Note: User Name and Password are assigned from SAS3 RADIUS server.
[Author] 3
Step 4. Voice Service Configuration
Go to WAN > WAN Configuration > New
Mark Enable WAN and choose IPoE for Encapsulation Mode
And then WAN Mode is Route WAN, Service type is VOIP.
Mark Enable VLAN and use VLAN ID 25 for Voice Service.
And then Click Apply.
[Author] 4
After you set up WAN interfaces for data and voice service. You will see like this.
And then you need to set up for User phone extension.
Go to Voice > VoIP Basic Configuration.
And fill IP address in Address of the Primary Proxy Server and Home Domain.
Server IP Address is 10.25.15. 253.All port number are 5060 which is default for SIP interface.
[Author] 5
Choose 2_VOIP_R_VID_25 for Signaling Port and Media Port. This port can see after add WAN
interface with VLAN 25.
Region is Myanmar and then mark Enable User.
Then fill Extension Phone number (or) last four digit of customer ID.
Choose Associated POST Port to 1.
And then fill Authentication User name and Password. User name is the same with Phone
Number. And password is imnet@customer ID.
And Click Apply.
[Author] 6
Step 5. Checking Voice Service Configuration
Go to Status > WAN Information and Check whether IP address get.
Go to Status > VoIP Information and Check whether Registry Error occur.
After you set up successful, you can see following with no error.
If you see error in Registry Error, check VoIP user name, password and server address.
[Author] 7
AYK
Revision History
Technical Document Summary Of
Revision Date Version
Provided By Prepared By Changes
Name
Update
24th Jan 2019 0.0 Name Name Implementation
Guidebook
Name
Acknowledgement
This document is the property of One Cloud Technology and should not be reproduced, by all means, in
whole or in part, without prior permission.
Contact Information
We look forward to working with IM-Net. and supporting your network to have great
performance and service. We are confident that we can meet the challenges ahead and stand ready to
partner with you in delivering an effective IT solution.
No: Name Position Email Mobile
1 Aung Ye Kyaw System Engineer [email protected] 09960876864
[Author] 8
