DATA SHEET

RMP-121D
Reverse power relays
ANSI code 32

4921240106L
1. General information
1.1 Application and features........................................................................................................................................................................................................3
1.1.1 Application.............................................................................................................................................................................................................................3
1.1.2 Measuring principle........................................................................................................................................................................................................... 3
1.1.3 Timer functions.................................................................................................................................................................................................................... 3
1.1.4 Relay outputs....................................................................................................................................................................................................................... 4

2. Technical information
2.1 Technical specifications and dimensions.................................................................................................................................................................... 5
2.1.1 Technical specifications................................................................................................................................................................................................... 5
2.1.2 Settings and indication..................................................................................................................................................................................................... 6
2.1.3 Connections/dimensions (in mm)................................................................................................................................................................................ 6

3. Ordering information
3.1 Order specifications and disclaimer............................................................................................................................................................................... 7
3.1.1 Available variants............................................................................................................................................................................................................... 7
3.1.2 Order specifications.......................................................................................................................................................................................................... 7
3.1.3 Disclaimer..............................................................................................................................................................................................................................7

DATA SHEET 4921240106L EN Page 2 of 7

 1. General information

• Protection against "motoring"

• Single phase measurement
• LED indication of fault condition
• Timer-controlled tripping
• LED indication for activated relay

1.1 Application and features

1.1.1 Application

The protective reverse power relay type RMP-121D forms part of a complete DEIF series of relays for protection and control of
generators, and is applicable to both marine and land-based installations. Also available are overload relays (RMP-111D) and
combined overload and reverse power relays (RMP-112D).

The RMP-121D is type-approved by major classification societies.

The protective reverse power relay will prevent a generator running in parallel with other generators from running as a motor
("motoring") in case of lost prime mover torque, and will thus protect the prime mover, at the same time ensuring that the remaining
generators connected to the system are not overloaded.

Likewise, the RMP-121D protects against reverse power due to an increase of the power of other generators connected to the
system.

1.1.2 Measuring principle

The applied TDM (Time-Division-Multiplication) principle ensures an accurate measurement of the RMS value of the power (U × I ×
cos-φ), irrespective of wave form.

The RMP-121D is available with the following connections:

1W Single phase
1W3 1-element 3-phase 3-wire, balanced load
1W4 1-element 3-phase 4-wire, balanced load

The set point value is set on the front of the relay by means of a potentiometer. If exceeded, a fault signal is generated, and the
associated yellow LED is lit.

1.1.3 Timer functions

The RMP-121D can be delivered with two different timer characteristics:

• Normal timer characteristic means that the delay does not depend on the exceeding of the set point.
• Inverse timer characteristic means that if the -P set point is exceeded by 10 % of nominal power, the inverse timer functionality
gives the same delay as the time potentiometer. If the -P set point is exceeded by 20 % of nominal power, the delay will be half
the value set on the time potentiometer.

DATA SHEET 4921240106L EN Page 3 of 7

 Time - reverse power relay
35

30

25

20

5 sec
Sec

15 10 sec
15 sec
10

0
5 7.5 10 12.5 15 17.5 20 22.5 25 27.5 30 32.5 35 37.5 40

Reverse power deviation in % of nominal power

1.1.4 Relay outputs

The RMP-121D is provided with an output with a minimum contact, either normally energised or normally de-energised.

The contact may be set to open or to close on activation.

Normally energised contact

Recommended for land-based installations for warning and alarm purposes.

In case of an auxiliary supply drop-out, the contact is immediately activated.

Normally de-energised contact

Recommended for marine installations for regulating and control purposes.

An auxiliary supply failure will not result in an unwanted activation of the contact.

Latch circuit

The contact can be locked in its warning position, even if the input returns to normal (add "L" to contact type in order specifications if
this is required).

The latch circuit is reset by disconnecting the auxiliary supply.

Hysteresis

In order to avoid "chatter" on the relay contacts the contact functions are provided with a hysteresis, that is a difference of 2 % of full
scale between energising and de-energising of the relay.

Power-up/power-down circuits

The RMP-121D is provided with a 200 ms power-up circuit, ensuring the correct function of the relay on connection of the auxiliary
voltage.

INFO
Normally energised contacts are not activated until 200 ms after connection of the auxiliary voltage.

Likewise, the RMP-121D has a ride-through circuit that allows continued operation, supervision and maintenance in the event of a
momentary loss of power for up to 200 ms.

DATA SHEET 4921240106L EN Page 4 of 7

 2. Technical information

2.1 Technical specifications and dimensions

2.1.1 Technical specifications

0.3-0.4-0.5-0.6-0.8-1.0-1.3-1.5-2.0-2.5-3.0-4.0-5.0 A AC
Meas. current (In)
UL/cUL Listed: 0.4 to 5.0 A AC

75 to 100 % of In (for example 0.4, 0.45, etc.)

Adjusted range
(lowest meas. range: 0.3 A)

4 × In, continuously,
Overload 20 × In for 10 s (max. 75 A)
80 × In for 1 s (max. 300 A)

Load Max. 0.5 VA per phase

57.7-63.5-100-110-127-200-220-230-240-380-400-415-440-450-480-660-690 V AC
Meas. voltage (Un)
UL/cUL Listed: 57.7 to 450 V AC

1.2 × Un, continuously,

Overload
2 × Un for 10 s

Load 2 kΩ/V

Frequency range 40 to 45 to 65 to 70 Hz

Outputs 1 minimum contact

Contact type Relay B: Normally energised ("NE"), or normally de-energised ("ND") with or without latch circuit ("L")

Relay contact 1 change-over switch

250 V AC/24 V DC, 8 A (200 x 103 change-overs at resistive load)

Contact ratings
UL/cUL Listed: Resistive load only

Contact voltage Max. 250 V AC/150 V DC

Hysteresis 2 % of full scale (F.S.)

Response time <400 ms

-25 to 70 °C (-13 to 158 °F) (operating)

Temperature
UL/cUL Listed: Max. surrounding air temp. 60 °C/140 °F

Temperature drift Set points: Max. 0.2 % of full scale per 10 °C/50 °F

Galv. separation Between inputs, outputs and aux. voltage: 3250 V - 50 Hz - 1 min.

57.7-63.5-100-110-127-220-230-240-380-400-415-440-450-480-660-690 V AC ±20 % (max. 3.5 VA)

24-48-110-220 V DC -25/+30 % (max. 2 W)
Supply voltage (Un)
UL/cUL Listed: Only 24 V DC and 110 V AC
DC supply must be from a class 2 power source

Climate HSE, to DIN 40040

EMC To IEC/EN 61000-6-1/2/3/4

Max. 4.0 mm2 (single-stranded)

Connections
Max. 2.5 mm2 (multi-stranded)

Materials All plastic parts are self-extinguishing to UL94 (V1)

Protection Case: IP40. Terminals: IP20, to IEC 529 and EN 60529

The Uni-line components are approved by the major classification societies. For current approvals see
Type approval
[Link] or contact DEIF A/S.

UL Listed only on request

UL markings
UL Listing will be lost if the product is re-customised outside DEIF DK's production plant

DATA SHEET 4921240106L EN Page 5 of 7

 Wiring: Use 60/75 °C (140/167 °F) copper conductors only
Wire size: AWG 12-16 or equivalent
Installation: To be installed in accordance with the NEC (US) or the CEC (Canada)

2.1.2 Settings and indication

Setting of LED/relay

Reverse power set point:

"-P>" yellow LED is lit when the set point has been exceeded, but the relay not yet activated
(0 to 25 %) of -Pn

Time delay:
Contact is activated and red LED lit after the timer has expired.
(0 to 20 s) in seconds

The relay is furthermore equipped with a green LED marked "POWER" for indication of power ON. Once the relay has been
mounted and adjusted, the transparent front cover may be sealed to prevent unwanted change of the setting.

2.1.3 Connections/dimensions (in mm)

1W(4) 1W3

AUX SUPPLY RELAY B AUX SUPPLY RELAY B

+
~ ~- -P> +
~ ~- -P>

1 3 6 7 8 1 3 6 7 8
X1 X2 B X1 X2 B

RMP-121D RMP-121D

N L1 L1 L1 L2 L3 L1
16 17 23 24 17 19 21 23 24

L1 S1 S2 L1 S1 S2
P1 P2 P1 P2
L2 L2

L3 L3

Shown contact positions: Aux. voltage not connected

85.0
4.5
75.0

61.0

99.7 110.0

Weight: Approx. 0.650 kg

DATA SHEET 4921240106L EN Page 6 of 7

 3. Ordering information

3.1 Order specifications and disclaimer

3.1.1 Available variants

Item no. Variant no. Variant description

2913310520 01 RMP-121D - DC supply

2913310520 02 RMP-121D - AC supply

3.1.2 Order specifications

INFO
There are no additional options to the standard variant.

Variants

Mandatory information

Variant Measuring Measuring Supply Timer

Item no. Type Coupling Relay B
no. power (Pn) voltage voltage characteristic

Example:

Mandatory information

Variant Measuring Measuring Relay Supply Timer

Item no. Type Coupling
no. power (Pn) voltage B voltage characteristic

Normal timer
2913310520-02 RMP-121D 02 1W3 0 to 100 W 110 V AC ND 220 V AC
characteristic

INFO
Measuring power (Pn) = Primary power / (CT ratio × VT ratio)

INFO
Specify phase to phase voltage for couplings 1W3 and 1W4.

3.1.3 Disclaimer

DEIF A/S reserves the right to change any of the contents of this document without prior notice.

The English version of this document always contains the most recent and up-to-date information about the product. DEIF does not
take responsibility for the accuracy of translations, and translations might not be updated at the same time as the English document.
If there is a discrepancy, the English version prevails.

DATA SHEET 4921240106L EN Page 7 of 7