Compact

Performance
Safety Relief Valves
Series 437
Series 459

CATALOG
[Link]

Com_Perf_DEPF_Kuka.indd 2 11.05.12 16:13

 Valve Finder
Product group

controlled
High

Medium-
High operating to set pressure ratio,
Yes
high backpressure Efficiency
or low total height?

No

Clean
Clean Service Yes
application? Service

No

Critical
Critical Service / highly corrosive Yes
application? Service

No

Safety Relief Valves

API
API specified Yes
application?

Spring loaded
No

Steam, gas and liquid application Modulate

Yes
with low capacity in relation Action
to valve size?

No

Orifice ≥ F High
Performance

Required
Orifice letter?
Compact
Performance
Orifice ≤ F
over valve
Change-

Bursting

Best
disc

Additional components beyond Yes

safety valves Availability

Com_Perf_DEPF_Kuka.indd 2 11.05.12 16:13

 Contents

Overview Page LESER Type Page

General 2 Type 459, 459 HDD, 462, 462 HDD 17

Valve finder 2 Type 459
Applications, General design features 4 Materials
• Available designs 18
• Available designs – materials 19
LESER Type Page
Article numbers 20
Type 437, 438, 439 7 Dimensions and weights

Type 437 • Metric Units [Threaded connection] 21

Materials • Metric Units [Flanged connection] 22

• Available designs 8 Pressure temperature ratings

• Available designs – materials 9 • Metric Units 23

Article numbers 10 Article numbers – Type 459 HDD 24

Dimensions and weights Article numbers – Type 462 25

• Metric Units [Threaded connection] 11 Article numbers – Type 462 HDD 26

• Metric Units [Flanged connection] 12 Available options – Type 459, 459 HDD, 462, 462 HDD 27

Pressure temperature ratings

• Metric Units 13
Article numbers – Type 438 14
Article numbers – Type 439 15
Available options – Type 437, 438, 439 16

Type 437 Type 437 Type 437 Type 459 Type 459 Type 459 HDD
Packed knob H4 Packed knob H4 Pull button H3 Cap H2 Plain lever H3 Packed lever H4
Long version

Type 437 Type 437 Type 459 Type 459

Packed knob H4 Cap H2 Cap H2 Cap H2
Certified for horizontal fitting Flange connection Balanced bellows design Flange connection

Com_Perf_DEPF_Kuka.indd 3 11.05.12 16:13

 General Information

LESER –
Compact Performance Safety Valves
This product group stands for

✓ Compact dimensions with high capacity relative

to the safety valve size
✓ Great variety of threaded and flanged connections
✓ Wide pressure range

LESER´s Compact Performance Safety Valves

• Are designed to meet all industrial applications up to F orifice

• Open rapidly with an overpressure of max. 5 % (Series 459)
resp. 10 % (Series 437) to the full design lift.
• Have a maximum blowdown of minus 10 % for steam / gas
service and minus 20 % for liquid service.
• Are developed in a close cooperation with plant engineers
and service specialists.
• Serve for protection of processes and equipment.
• Are approved by all important approval organisations
worldwide which ensures the worldwide applicability e. g.:

• European Community: CE-marking according to the

Pressure Equipment Directive (PED) 97/23/EC and
EN ISO 4126-1
• USA: UV-stamp according to ASME Section VIII Division 1,
National Board certified capacities
• Germany: VdTÜV approval according to PED,
EN ISO 4126-1, TÜV SV 100 and AD 2000-Merkblatt A2
• Canada: Canadian Registration Number according
to the requirements of particular provinces
• China: AQSIQ based on the approval according to
ASME Section VIII Division 1 and AD 2000-Merkblatt A2

Furthermore, all LESER Compact Performance Safety Valves

are designed, marked, produced and approved according to the
requirements of the following regulations (directives, codes, rules
and standards).

EN ISO 4126-7, EN 12266-1 / -2, ISO 7-1 threads, ISO 228

threads, DIN EN 1092 Part I and II flanging ASME PTC 25,
ASME-Code Sec. II, ASME B 16.34, ASME B1.20.1 threads
and ASME B16.5 flanging, API Std. 527, API RP 576
AD 2000-Merkblatt A4, AD 2000-Merkblatt HP0, TRD 110,
TRD 421, TRD 721

Com_Perf_DEPF_Kuka.indd 4 11.05.12 16:13

 General Information

Applications General Design Features

LESER – Compact Performance Safety Valves LESER´s Compact Performance Safety Valves

offer ultimate protection against unallowable over- cover a large variety of types, materials and
pressures in all applications for steam, gases and options to fit any application:
liquids where smaller capacities are required.
• Connection sizes from 3/8" to 1 1/2" and 5 orifices
Typical applications for LESER Compact Performance (D through F) provide high suitability to the application
Safety Valves are: • Threaded connections, male and female, according to
all international standards guarantee worldwide applicability
• Air / gas compressors and pumps • Flanged connections according ANSI, DIN and JIS
• Technical gases and CO2 plants guarantee a worldwide applicability
• Cylinder filling stations • Inlet pressure ratings up to PN 700 / Class 2500 to fit all
• Chemical equipment and piping required design pressures
• Pressure vessels and piping systems containing gas, • 2 standard based / inlet body materials, Chrome steel and
air, liquid or steam stainless steel as well as 3 standard body materials, ductile
• LPG / LNG terminals, carriers etc. iron, steel and stainless steel can be selected according to
• Cryogenic systems and oxygen applications the application
• Thermal relief • All parts can be machined from bar materials to cover
• High pressure extraction plants special material requirements such as Hastelloy®, Duplex,
Super Duplex, Tantalum or Titanium within
unrivalled lead time
• Set pressures from 0.1 to 850 bar / 1.5 to 12328 psig
make Compact Performance safety valves suitable for all
industrial processes
• Operating temperatures from -270 to 550 °C / -454 to
1022 °F (acc. to DIN EN) cover a wide range of applications
• One design and spring (single trim) for steam, gas and
liquid applications reduces the number of spare parts
and ensures low cost maintenance management
• Ringless design needs no trim adjustments for easy
maintenance
• One-piece spindle reduces friction which leads to high
operation accuracy
• Self-draining body design, avoids residues and reduces
corrosion

LESER´s Compact Performance Safety Valves

can be customized with a great variety of options, e. g.:

• Special connections specified by the customer for

optimised adaptation to the plant
• Stellited or hardened metal sealing for longer product life
• Soft seat solutions for superior tightness
• Stainless steel bellows for back pressure compensation
• Heating jackets for applications with high viscosity fluids
• Base / inlet body, body, bonnet and all internal parts can
be produced in special materials exactly to meet customer
specification requirements

Com_Perf_DEPF_Kuka.indd 5 11.05.12 16:13

 6

Com_Perf_DEPF_Kuka.indd 6 11.05.12 16:13

 Type
Packed knob H4
Conventional design
437
438
439
Safety Relief Valves
Packed knob H4
Flanged connection – spring loaded
Content Page

Type 437
Materials
• Available designs 8
• Available designs – materials 9
Article numbers 10
Dimensions and weights
• Metric Units [Threaded connection] 11
[Flanged connection] 12
Pressure temperature ratings
• Metric Units 13

Cap H2 Article numbers

Long version • Type 438 14
• Type 439 15

Type 437, 438, 439

•Available Options 16

Com_Perf_DEPF_Kuka.indd 7 11.05.12 16:13

 Type 437
Available designs

40 Cap H2
18 Adjusting screw
with bushing Axial needle 69

19 Lock nut beering

16 Spring plate
12 Spindle
54 Spring
2 Outlet body
17 Spring plate
57 Pin
61 Ball
7 Disc
1 Body

Conventional design Long version

Threaded connection Threaded connection
only Type 437, 438

Outlet flange 2.4

Outlet adaptor 2.1

Inlet flange 48

Conventional design
Flange connection

Com_Perf_DEPF_Kuka.indd 8 11.05.12 16:13

 Type 437
Available designs – materials

Materials
Item Component Remarks Type 4373 Type 4374

Threaded 1.41041), 1.4404 1.4404

connection SA 479 4301), SA 479 316L SA 479 316L
1.4404 1.4404
1 Base / Inlet body Flange connection
SA 479 316L SA 479 316L
1.41042), 1.4404 Stellited 1.4404 Stellited
Long version
SA 479 4302), SA 479 316L Stellited SA 479 316L Stellited
1.4104 1.4404
2 Outlet body
SA 479 430 SA 479 316L
1.4404 1.4404
2.1 Outlet adaptor Flange connection
316L 316L
1.4404 1.4404
2.4 Outlet flange Flange connection
316L 316L
1.4122 1.4404
Hardened stainless steel SA 316L
7 Disc
d0 6: 1.4404 Stellited d0 10: 1.4122 d0 6: 1.4404 Stellited d0 10: 1.4404
Long version
d0 6: 316L Stellited d0 10: HSS d0 6: 316L Stellited d0 10: 316L
1.4021 1.4571
420 316Ti
12 Spindle3)
1.4571 1.4571
Long version
316Ti 316Ti
1.4104 1.4404
Chrome steel 316L
16/17 Spring plate3)
1.4404 1.4404
Long version
316L 316L
Adjusting screw 1.4104 PTFE 1.4404 PTFE
18
with bushing Chrome steel PTFE 316L PTFE
1.0718 1.4404
19 Lock nut
Steel 316L
1.0718 1.4404
40 Cap H2
Steel 316L
1.4404 1.4404
48 Inlet flange Flange connection
316L 316L
1.4310 1.4310
54 Spring
Stainless steel Stainless steel
1.4310 1.4310
57 Pin
Stainless steel Stainless steel
1.3541 1.4401
61 Ball
Hardened stainless steel 316
1.4404 1.4404
69 Axial needle beering Long version
316L 316L
1)
Only for male thread DIN ISO 228-1 G3/8, G1/2, G3/4 (Option Codes V49, V54, V55).
2)
Only for d0 10 with male thread DIN ISO 228-1 G3/8, G1/2, G3/4 (Option Codes V49, V54, V55).
3)
The items 12 and 17 are combined to one unit.

Please notice:
– Modifications reserved by LESER.
– LESER can upgrade materials without notice.
– Every part can be replaced by other material acc. to customer specification.

Com_Perf_DEPF_Kuka.indd 9 11.05.12 16:13

 Type 437
Article numbers

Metal seat Disc with

sealing plate

Article numbers
Conventional design Long version
Actual Orifice diameter
10 6 10
d0 [mm]
Actual Orifice area
78,5 28,3 78,5
A0 [mm2]
Actual Orifice diameter
0,394 0,236 0,394
d0 [inch]
Actual Orifice area
0,122 0,044 0,122
A0 [inch2]
Base / Inlet body material: 1.4104 (430)

H2 Art.-No. 4373. 2602 2622 2612

H3 Art.-No. 4373.
pmax. = 16 barg 2603 – –

H4 Art.-No. 4373. 2604 2624 2614

p [barg] S/G/L 0,1 – 93 S/G 180 – 365 S/G/L 93 –180
p [psig] S/G/L 1,5 – 1349 S/G 2611 – 5294 S/G/L 1349 – 2611
Base / Inlet body material: 1.4404 (316L)

H2 Art.-No. 4374. 3142 3122 3152

H4 Art.-No. 4374. 3144 3124 3154

p [barg] S/G/L 0,1 – 68 S/G 180 – 330 S/G/L 68 –180
p [psig] S/G/L 1,5 – 986 S/G 2611 – 4786 S/G/L 986 – 2611

10

Com_Perf_DEPF_Kuka.indd 10 11.05.12 16:13

 Type 437
Dimensions and weights – Metric Units

Threaded connections
Conventional design Long version
Size Outlet body 1 3 1 3 1 3
/2" /4" 1" /2" / 4" 1" /2 " /4 " 1"
Actual Orifice diameter d0 [mm] 10 10 10 6 6 6 10 10 10
Actual Orifice area A0 [mm2] 78,5 78,5 78,5 28,3 28,3 28,3 78,5 78,5 78,5

Weight [kg] 1,2 1,6 1,6 1,4 2,1 2,1 1,4 2,1 2,1
Required installation diameter [mm] 65 80 80 65 80 80 65 80 80

Inlet thread “Female”

Conventional design Long version
Size outlet body 1 3 1 3
1
/2" 3
/4" 1" /2" / 4" 1" /2 " /4 " 1"
Center to face [mm]
DIN ISO 228-1 G
Inlet 1/2" a 46 46 49 46 46 49 46 46 49
ISO 7-1/BS 21 Rc
3
ASME B1.20.1 NPT Inlet /4", 1" a 56 56 59 56 56 59 56 56 59
Outlet b 30 37 37 30 37 37 30 37 37
Height [mm]
Inlet 1/2" H max. 209 209 212 230 230 233 230 230 233
Inlet 3/4", 1" H max. 219 219 222 240 240 243 240 240 243

Inlet thread “Male”

Conventional design Long version
Size outlet body 1 3 1 3 1 3
/2" / 4" 1" /2" / 4" 1" /2 " /4 " 1"
Center to face [mm]
Inlet a 33 33 36 33 33 36 33 33 36
DIN ISO 228-1 G
Outlet b 30 37 37 30 37 37 30 37 37
ISO 7-1/BS 21 R
Inlet a 31 31 34 31 31 34 31 31 34
ASME B1.20.1 NPT
Outlet b 30 37 37 30 37 37 30 37 37
Height [mm]
Conventional design Long version
Size inlet thread 3 1 3 3 1 3
/8" /2" /4" 1" /8" /2" /4" 1"
DIN ISO 228-1 G H max. 208 210 212 217 229 231 233 238
ISO 7-1/BS 21 R H max. – 213 214 220 – 234 235 241
ASME B1.20.1 NPT H max. – 216 216 224 – 237 237 245

Length of screwed end “c” [mm]

3 1 3
Size inlet thread /8" /2" /4 " 1"
DIN ISO 228-1 G 12 14 16 18
ISO 7-1/BS 21 R – 19 20 23
ASME B1.20.1 NPT – 22 22 27

Required installation diameter Conventional design – Female thread Conventional design – Male thread Long version – male thread

11

Com_Perf_DEPF_Kuka.indd 11 11.05.12 16:13

 Type 437
Dimensions and weights – Metric Units

Flanged connection
Conventional design Long version
Actual Orifice diameter
10 6 10
d0 [mm]
Actual Orifice area
78,5 28,3 78,5
A0 [mm2]
DIN EN 1092-1
Flange rating class PN 40
Center to face [mm] Inlet a 100 100 100
Outlet b 100 100 100
Height [mm] H max. 263 284 284
Flange rating class ≥ PN 160
Center to face [mm] Inlet a 103 103 103
Outlet b 100 100 100
Height [mm] H max. 266 287 287
ASME B 16.5
Flange rating class 150
Center to face [mm] Inlet a 100 100 100
Outlet b 100 100 100
Height [mm] H max. 263 284 284
Flange rating class ≥ 300
Center to face [mm] Inlet a 103 103 103
Outlet b 100 100 100
Height [mm] H max. 266 287 287
Note The outlet dimension b can differ at special combinations of nominal diameter and pressure range if flanged connections are used at the inlet and outlet.
Special dimensions are possible. More information at sales@[Link]

Weight
To calculate the total weight use the formula: mT = mN + mF (Inlet) + mF (Outlet)
Weight net [kg]
(without inlet and outlet flange) mN 2,4 2,8 2,8

Flange dimensions
DIN EN 1092-1 / Flange rating PN ASME B16.5 / Flange rating
Size 40 100 160 250 320 400 Size 150 300 600 900 1500 2500
DN 15 NPS 1/2"
Flange thickness [mm] s 18 – 22 28 28 30 14 18 18 26 26 30,2
Weight slip on flange [kg] mF 0,8 – 1,2 2,5 2,5 3,6 0,6 0,9 0,9 2,1 2,1 3
DN 20 NPS 3/4"
Flange thickness [mm] s 20 22 – – – – 15 18 18 25,4 25,4 32
Weight slip on flange [kg] mF 1,1 1,3 – – – – 0,8 1,4 1,4 2,3 2,3 3,5
DN 25 NPS 1"
Flange thickness [mm] s 22 – 26 30 36 40 17 21,5 21,5 32,5 32,5 40
Weight slip on flange [kg] mF 1,3 – 2,6 3,5 5 7,5 1 2,1 21 4,1 4,1 5,1

a
s s
s s

Conventional design Long version

12

Com_Perf_DEPF_Kuka.indd 12 11.05.12 16:13

 Type 437
Pressure temperature ratings

Metric Units
Actual Orifice diameter
6 10
d0 [mm]
Actual Orifice area
28,3 78,5
A0 [mm2]
Body material: 1.4104 (430)
Base / Connection size 3
/8" 1
/2" 3
/4" 1" 3
/8" 1
/2" 3
/4 " 1"
Inlet Body Pressure rating PN 400 PN 320
Outlet body Pressure rating PN 160 PN 160
Minimum p [barg] S/G/L
set pressure 180 [only S/G] 0,1

Maximum p [barg] S/G/L 16 [only H3]

set pressure 365 [only S/G]
180
Temperature min. [°C ] -10 -10
acc. to DIN EN max. [°C ] +220 +220
Temperature min. [°C ] -29 -29
acc. to ASME max. [°C ] +220 +220
Body material: 1.4404 (316L)
Base / Connection size 3
/8" 1
/2" 3
/4" 1" 3
/ 8" 1
/2" 3
/4 " 1"
Inlet Body Pressure rating PN 400 PN 320
Outlet body Pressure rating PN 160 PN 160
Minimum p [barg] S/G/L
set pressure 180 [only S/G] 0,1

Maximum p [barg] S/G/L

set pressure 365 [only S/G] 180

Temperature min. [°C ] -270 -270

acc. to DIN EN max. [°C ] +280 +280
Temperature min. [°C ] -268 -268
acc. to ASME max. [°C ] +280 +280

13

Com_Perf_DEPF_Kuka.indd 13 11.05.12 16:13

 Type 438
Article numbers

O-ring disc

Article numbers
Conventional design Long version
Actual Orifice diameter
10 10
d0 [mm]
Actual Orifice area
78,5 78,5
A0 [mm2]
Actual Orifice diameter
0,394 0394
d0 [inch]
Actual Orifice area
0,122 0,122
A0 [inch2]
O-ring material NBR “N” J30 NBR “N” J30
CR “K” J21 CR “K” J21
EPDM “D” J22 EPDM “D” J22
FKM “L” J23 FKM “L” J23
FFKM “C” J20 FFKM “C” J20
Base / Inlet body material: 1.4104 (430)

H2 Art.-No. 4383. 2862 2872

H3 Art.-No. 4383.
pmax = 16 barg 2863 –

H4 Art.-No. 4383. 2864 2874

p [barg] S/G/L 5 – 93 93 – 180
p [psig] S/G/L 72,5 – 1349 1349 – 2611
Base / Inlet body material: 1.4404 (316L)

H2 Art.-No. 4384. 2982 2992

H4 Art.-No. 4384. 2984 2994

p [barg] S/G/L 5 – 68 68 – 180
p [psig] S/G/L 72,5 – 986 986 – 2611

14

Com_Perf_DEPF_Kuka.indd 14 11.05.12 16:13

 Type 439
Article numbers

Vulcanized soft seat

Article numbers
Actual Orifice diameter
10
d0 [mm]
Actual Orifice area
78,5
A0 [mm2]
Actual Orifice diameter
0,394
d0 [inch]
Actual Orifice area
0,122
A0 [inch2]
Soft seal material NBR “N” J30
CR “K” J21
EPDM “D” J22
FKM “L” J23
FFKM “C” J20
Base / Inlet body material: 1.4104 (430)

H2 Art.-No. 4393. 2882

H3 Art.-No. 4393.
pmax = 10 barg 2883

H4 Art.-No. 4393. 2884

p [barg] S/G/L 0,1 – 16

p [psig] S/G/L 1,5 – 232
Base / Inlet body material: 1.4404 (316L)

H2 Art.-No. 4394. 2892

H4 Art.-No. 4394. 2894

p [barg] S/G/L 0,1 – 16

p [psig] S/G/L 1,5 – 232

15

Com_Perf_DEPF_Kuka.indd 15 11.05.12 16:13

 Type 437, 438, 439
Available options

Male thread Female thread Flanged version

Type 437 Type 437 Type 438 Type 439

Stellited sealing surface Disc with inserted sealing plate Soft seal o-ring disc Vulcanized soft seal disc
J25: Disc stellited J44: PTFE-FDA “A” J30: NBR “N” J30: NBR “N”
L20: Base/inlet body J48: PCTFE “G” J21: CR “K” J21: CR “K”
J49: VESPEL-SP1 “T” J22: EPDM “D” J22: EPDM “D”
J23: FKM “L” J23: FKM “L”
J20: FFKM “C” J20: FFKM “C”

Heating jacket Test gag INCONEL X-750 spring

H29 J70: H2 X08

Special material
2.4610 Hastelloy® C4
2.4360 Monel® 400
1.4462 Duplex

Code
YYYY
Code Code
XXXX ZZZZ

16

Com_Perf_DEPF_Kuka.indd 16 11.05.12 16:13

 Type
459, 462
Plain lever H3 459 HDD
462 HDD
Safety Relief Valves
– spring loaded
Contents Page

Type 459
Materials
• Available designs 18
• Available designs – materials 19
Article numbers
Dimensions and weights
• Metric Units [Threaded connection] 21
[Flanged connection] 22
Pressure temperature ratings
• Metric Units 23

Cap H2
Article numbers
• Type 459 HDD 24
• Type 462 25
• Type 462 HDD 26

Type 459, 459 HDD, 462, 462 HDD

• Available options 27

17

Com_Perf_DEPF_Kuka.indd 17 11.05.12 16:13

 Type 459
Available designs

40 Cap H2
18 Adjusting screw
with bushing
19 Lock nut
9 Bonnet
16 Spring plate
54 Spring
12 Spindle
17 Spring plate
14 Split ring
60 Gasket
8 Guide
57 Pin
61 Ball
7 Disc
2 Outlet body
1 Inlet body
Conventional design Conventional design
Threaded connection Threaded connection

60 Gasket
Outlet flange 2.4
11 Bonnet
spacer Outlet adaptor 2.1

15 Bellows
60 Gasket

Inlet flange 48

Balanced bellows Conventional design

Threaded connection Flange connection

18

Com_Perf_DEPF_Kuka.indd 18 11.05.12 16:14

 Type 459
Available designs – materials

Materials
Item Component Remarks Type 4593 Type 4592 Type 4594

Threaded 1.41042), 1.4404 1.4404 1.4404

connection SA 479 4302), SA 479 316L SA 479 316L SA 479 316L
1 Base / Inlet body
1.4404 1.4404 1.4404
Flange connection
SA 479 316L SA 479 316L SA 479 316L
0.7043 1.0619 1.44081)
2 Outlet body
Ductile Gr. 60-40-18 WCB CF8M1)
1.4404 1.4404 1.4404
2.1 Outlet adaptor Flange connection
316L 316L 316L
1.4404 1.4404 1.4404
2.4 Outlet flange Flange connection
316L 316L 316L
1.4122 1.4122 1.4404
7 Disc Metal seat
Hardened stainless steel Hardened stainless steel 316L
1.4104 tenifer 1.4104 tenifer 1.4404
Chrome steel tenifer Chrome steel tenifer 316L
8 Guide
Balanced 1.4404 / SA 316L 1.4404 / SA 316L 1.4404 / SA 316L
bellows design Upper conn. part of balanced bellows Upper conn. part of balanced bellows Upper conn. part of balanced bellows

0.7043 1.0460 1.4404

Ductile Gr. 60-40-18 105 316L
9 Bonnet
Balanced 1.4404 1.4404 1.4404
bellows design 316L 316L 316L
Balanced 1.0460 1.0460 1.4404
11 Bonnet spacer
bellows design Carbon steel Carbon steel 316L
1.4021 1.4404 1.4404
420 316L 316L
12 Spindle
Balanced 1.4404 1.4404 1.4404
bellows design 316L 316L 316L
1.4104 1.4104 1.4404
14 Split ring
Chrome steel Chrome steel 316L
Balanced 1.4571 1.4571 1.4571
15 Bellows
bellows design SA 316Ti 316Ti 316Ti
1.0718 1.0718 1.4404
16/17 Spring plate
Steel Steel 316L
Adjusting screw 1.4104 PTFE 1.4104 PTFE 1.4404 PTFE
18
with bushung Chrome steel PTFE Chrome steel PTFE 316L PTFE
1.4104 1.4104 1.4404
19 Lock nut
Chrome steel Chrome steel 316L
1.0718 1.0718 1.4404
40 Cap H2
Steel Steel 316L
1.4404 1.4404 1.4404
48 Inlet flange Flange connection
316L 316L 316L
1.1200 / 1.8159 / 1.7107 1.1200 / 1.8159 / 1.7107 1.4310
Standard
Carbon steel Carbon steel Stainless steel
54 Spring
1.4310 1.4310 –
Optional
Stainless steel Stainless steel –
1.4310 1.4310 1.4310
57 Pin
Stainless steel Stainless steel Stainless steel
Graphite 1.4401 Graphite 1.4401 Graphite 1.4401
60 Gasket
Graphite 316 Graphite 316 Graphite 316
1.3541 1.3541 1.4401
61 Ball
Hardened stainless steel Hardened stainless steel 316

Please notice:

– Modifications reserved by LESER.

– LESER can upgrade materials without notice.
– Every part can be replaced by other material acc. to customer specification.
1)
Type 4594 with outlet body deep-drawn: outlet body material 1.4404 / 316L
2)
only valid for male thread DIN ISO 228-1 G¾", G1", G1½" (Option codes V55, V56, V57) (please note availability regarding d0)
19

Com_Perf_DEPF_Kuka_Corrections_12_07_2012_SH.indd 19 19.07.2012 [Link]

 Type 459
Article numbers

Metal seat Disc with

sealing plate

Article numbers
Actual Orifice diameter d0 [mm] 9 13 17,5
Actual Orifice area A0 [mm2] 63,6 133 241
Actual Orifice diameter d0 [inch] 0,354 0,512 0,689
Actual Orifice area A0 [inch2] 0,099 0,206 0,374
Outlet body casted
Inlet body 1.4104 H2 Art.-No. 4593. 2502 2512 2522
Outlet body 0.7043 H3 Art.-No. 4593. 2503 2513 2523
Bonnet 0.7043 H4 Art.-No. 4593. 2504 2514 2524
p [barg] 1,5 – 250 0,2 – 200 0,2 – 100
S/G/L
p [psig] 21,7 – 3626 2,9 – 2901 2,9 – 1450
Outlet body investment casted
Inlet body 1.4404
H2 Art.-No. 4592. 2472 2482 2492
Outlet body 1.0619
(WCB) H3 Art.-No. 4592. 2473 2483 2493
Bonnet 1.0460 H4 Art.-No. 4592. 2474 2484 2494
p [barg] 1,5 – 250 0,2 – 200 0,2 – 100
S/G/L
p [psig] 21,7 – 3626 2,9 – 2901 2,9 – 1450
Outlet body investment casted
Inlet body 1.4404
H2 Art.-No. 4594. 2162 2172 2182
Outlet body 1.4408
(CF8M)
H4 Art.-No. 4594. 2164 2174 2184
Bonnet 1.4404
p [barg] 1,5 – 250 0,2 – 200 0,2 – 100
S/G/L
p [psig] 21,7 – 3626 2,9 – 2901 2,9 – 1450
Outlet body deep-drawn
All body and H2 Art.-No. 4594. 2552 2562 2572
trim parts 1.4404 H4 Art.-No. 4594. 2554 2564 2574
p [barg] 1,5 – 250 0,2 – 200 0,2 – 100
S/G/L
p [psig] 21,7 – 3626 2,9 – 2901 2,9 – 1450

20

Com_Perf_DEPF_Kuka.indd 20 11.05.12 16:14

 Type 459
Dimensions and weights – Metric Units

Threaded connections
1 3 1 3 3
Size Outlet body /2" x 1" /4" x 1" 1" x 1" /2" x 1" /4" x 1" 1" x 1" /4" x 11/2" 1" x 11/2" 11/4" x 11/2" 11/2" x 11/2"
Actual Orifice diameter d0 [mm] 9 9 9 13 13 13 17,5 17,5 17,5 17,5
Actual Orifice area A0 [mm2] 63,6 63,6 63,6 133 133 133 241 241 241 241

Weight [kg] 2,6 2,6 2,6 2,6 2,6 2,6 3,0 3,0 3,0 3,0
Balanced bellows [kg] 3,4 3,4 3,4 3,4 3,4 3,4 3,8 3,8 3,8 3,8
Required installation diameter [mm] 165 165 165 165 165 165 165 165 165 165

Inlet thread “Female”

1 3 1 3 3
Size outlet body /2" x 1" /4" x 1" 1" x 1" /2" x 1" /4" x 1" 1" x 1" /4" x 11/2" 1" x 11/2" 11/4" x 11/2" 11/2" x 11/2"
Actual Orifice diameter d0 [mm] 9 9 9 13 13 13 17,5 17,5 17,5 17,5
Center to face / Height
DIN ISO 228-1 G
Inlet a 53 56 62 53 56 62 60 66 67 73
ASME B1.20.1 NPT
Center to face [mm] Outlet b 75 75 75 75 75 75 75 75 75 75
Height [mm] H max 283 286 292 283 286 292 287 293 294 300
Balanced bellows H max 315 318 324 315 318 324 319 325 326 332
ISO 7-1/BS 21 Rc Inlet a 53 56 64 53 56 64 60 68 – 77
Center to face [mm] Outlet b 75 75 75 75 75 75 75 75 – 75
Height [mm] H max 283 286 294 283 286 294 287 295 – 304
Balanced bellows H max 315 318 326 315 318 326 319 327 – 336

Inlet thread “Male”

Size outlet body 1" 1" 11/2"
Actual Orifice diameter d0 [mm] 9 13 17,5
Center to face [mm]
DIN ISO 228-1 G Inlet 1/2" – 1" a 52 – –
Inlet 1"– 2" a – – 56
Outlet b 75 75 75
ISO 7-1/BS 21 R Inlet 1/2" – 1" a 49 49 –
ASME B1.20.1 NPT Inlet 1" – 2" a – – 53
Outlet b 75 75 75

Height [mm]
Conventional design Balanced bellows
1 3
Size inlet thread /2" /4" 1" 11/4" 11 / 2 " 2" 1
/2" 3
/4 " 1" 11/4" 11/2" 2"
DIN ISO 228-1 G H max. 296 298 301 303 305 – 328 330 333 335 337 –
ISO 7-1/BS 21 R H max. 298 299 303 – 305 – 330 331 335 – 337 –
ASME B1.20.1 NPT H max. 301 301 307 308 308 309 333 333 339 340 340 341

Length of screwed end “c” [mm]

1 3
Size inlet thread /2 " / 4" 1" 11/4" 11/2" 2"
DIN ISO 228-1 G 14 16 18 20 22 –
ISO 7-1/BS 21 R 19 20 23 – 25 –
ASME B1.20.1 NPT 22 22 27 28 28 29

c c

Required installation Conventional design – Conventional design – Balanced bellows

diameter Female thread Male thread
21

Com_Perf_DEPF_Kuka.indd 21 11.05.12 16:14

 Type 459
Dimensions and weights – Metric Units

Flanged connection
Conventional design Balanced bellows
Actual Orifice diameter d0 [mm] 9 13 17.5 9 13 17.5
Actual Orifice area A0 [mm2] 63,6 133 241 63,6 133 241
DIN EN 1092-1
Flange rating PN 40 – PN 400
Center to face [mm] Inlet a 100 100 105 100 100 105
Outlet b 100 100 100 100 100 100
Height [mm] H max. 330 330 333 375 375 378
ASME B 16.5
Flange rating class 150 – 2500
Center to face [mm] Inlet a 100 103 105 100 100 105
Outlet b 100 100 100 100 100 100
Height [mm] H max. 330 330 333 375 375 378
Note The outlet dimension b can differ at special combinations of nominal diameter and pressure range if flanged connections are used at the inlet and outlet.
Special dimensions are possible. More information at sales@[Link].

Weight
For the calculation of the total weight please use the Formular: WT = WN + WF (Inlet) + WF (Outlet)
Weight net [kg]
mN 2,6 2,3 3 3,8 3,8 4,2
(without inlet and outlet flange)

Flange dimensions
DIN EN 1092-1 / Flange rating PN ASME B16.5 / Flange rating
Size 40 100 160 250 320 400 Size 150 300 600 900 1500 2500
DN 15 NPS 1/2"
Flange thickness [mm] s 18 – 22 28 28 30 14 18 18 26 26 30,2
Weight slip on flange [kg] mF 0,8 – 1,2 2,5 2,5 3,6 0,6 0,9 0,9 2,1 2,1 3
DN 20 NPS 3/4"
Flange thickness [mm] s 20 22 – – – – 15 18 18 25,4 25,4 32
Weight slip on flange [kg] mF 1,1 1,3 – – – – 0,8 1,4 1,4 2,3 2,3 3,5
DN 25 NPS 1"
Flange thickness [mm] s 22 – 26 30 36 40 17 21,5 21,5 32,5 32,5 40
Weight slip on flange [kg] mF 1,3 – 2,6 3,5 5 7,5 1 2,1 2,1 4,1 4,1 5,1
DN 40 NPS 11/2"
Flange thickness [mm] s 21 – 23 32 – – 22 24 24 32 – –
Weight slip on flange [kg] mF 2,1 – 2,9 4,3 – – 1,4 2,2 2,2 3,9 – –

Conventional design Balanced bellows

22

Com_Perf_DEPF_Kuka.indd 22 11.05.12 16:14

 Type 459
Pressure temperature ratings – Metric Units

Metric Units
Actual Orifice diameter
9 13 17,5
d0 [mm]
Actual Orifice Area
63,6 133 241
A0 [mm2]
Body material: 1.4104 (430) Type 4593
Base / Connection size 1
/2" 3
/4" 1" 1
/2" 3
/4" 1" 3
/4" 1" 11/4" 11/2" 2"
Inlet Body Pressure rating PN 400 PN 250 PN 160
Outlet body Pressure rating PN 40 PN 40 PN 40
Minimum
p [barg] S/G/L 1,5 0,2 0,2
set pressure

Min. set pressure p [barg] S/G/L 3 3 3

standard bellows

Min. set pressure1) p [barg] S/G/L 40 40 40

high press. bellows
Maximum
p [barg] S/G/L 250 200 100
set pressure
Temperature min [°C ] -10
acc. to DIN EN max [°C ] +300
Temperature min [°C ] -29
acc. to ASME max [°C ] +300
Body material: 1.4404 (316L) Type 4592
Base / Connection size 1
/2" 3
/4" 1" 1
/2" 3
/4" 1" 3
/4" 1" 11/4" 11/2" 2"
Inlet Body PN 250 PN 160
Pressure rating PN 160
PN 500 (Option code L20) PN 250 (Option code L20)
Outlet body Pressure rating PN 40 PN 40 PN 40
Minimum p [barg] S/G/L 1,5 0,2 0,2
set pressure
Min. set pressure p [barg] S/G/L 3 3 3
standard bellows

Min. set pressure1) p [barg] S/G/L 40 40 40

high press. bellows

Maximum p [barg] S/G/L 250 200 100

set pressure
Temperature min [°C ] -85
acc. to DIN EN max [°C ] +400
Temperature min [°C ] -29
acc. to ASME max [°C ] +427
Body material: 1.4404 (316L) Type 4594
Base / Connection size 1
/2" 3
/4" 1" 1
/2" 3
/4" 1" 3
/4" 1" 11/4" 11/2" 2"
Inlet Body PN 250 PN 160
Pressure rating PN 160
PN 500 (Option code L20) PN 500 (Option code L20)
Outlet body Pressure rating PN 40 PN 40 PN 40
Minimum p [barg] S/G/L 1,5 0,2 0,2
set pressure
Min. set pressure p [barg] S/G/L 3 3 3
standard bellows

Min. set pressure1) p [barg] S/G/L 40 40 40

high press. bellows
Maximum
p [barg] S/G/L 250 200 100
set pressure
Temperature min [°C ] -200
acc. to DIN EN max [°C ] +400
Temperature min [°C ] -184
acc. to ASME max [°C ] +427
1)
Min. set pressure high pressure bellows = Max. pressure standard bellows.
Because there is no open bonnet for this type available, please use at a temperature of 300 °C (572 °F) refer to SAP a stainless steel bellows or a specific
high temperature model without a bellows. For DIN EN applications at temperatures under -10°C please proceed according to AD-2000 Merkblatt W 10.

23

Com_Perf_DEPF_Kuka.indd 23 11.05.12 16:14

 Type 459 HDD
Article numbers

Metal seat Disc with

sealing plate

Article numbers
Actual Orifice diameter d0 [mm] 61) 9 13
2
Actual Orifice area A0 [mm ] 28,3 63,9 133
Actual Orifice diameter d0 [inch] 0,236 0,354 0,512
Actual Orifice area A0 [inch2] 0,044 0,099 0,206
Body material: 14404 (316L)
All body and 1.4404 H2 Art.-No. 4594. 2532 2582 2592
trim parts H4 Art.-No. 4594. 2534 2584 2594
p [barg] 420,01 – 850 1,5 – 420 0.2 – 200
S/G/L
p [psig] 6091 – 12328 21,7 – 6091 2.9 – 2901
1)
The specification of the medium is necessary at liquid applications (Option Code M09).

24

Com_Perf_DEPF_Kuka.indd 24 11.05.12 16:14

 Type 462
Article numbers

O-ring disc

Article numbers
Actual Orifice diameter d0 [mm] 9 13 17,5
Actual Orifice area A0 [mm2] 63,6 133 241
Actual Orifice diameter d0 [inch] 0,354 0,512 0,689
Actual Orifice area A0 [inch2] 0,099 0,206 0,374
O-ring material NBR “N” J30
CR “K” J21
EPDM “D” J22
FKM “L” J23
FFKM “C” J20
Outlet body casted
Inlet body 1.4104 H2 Art.-No. 4623. 2902 2912 2922
Outlet body 0.7043 H3 Art.-No. 4623. 2903 2913 2923
Bonnet 0.7043 H4 Art.-No. 4623. 2904 2914 2924
p [barg] 0,5 – 250 0,5 – 180 0,5 – 92,5
S/G/L
p [psig] 7,3 – 3626 7,3 – 2611 7,3 – 1342
Outlet body investment casted
Inlet body 1.4404 H2 Art.-No. 4622. 3772 3782 3792
Outlet body 1.0619
H3 Art.-No. 4622. 3773 3783 3793
(WCB)
Bonnet 1.0460 H4 Art.-No. 4622. 3774 3784 3794
p [barg] 0,5 – 250 0,5 – 180 0,5 – 92,5
S/G/L
p [psig] 7,3 – 3626 7,3 – 2611 7,3 – 1342
Outlet body investment casted
Inlet body 1.4404
Outlet body 1.4408 H2 Art.-No. 4624. 2192 2202 2212
(CF8M)
Bonnet 1.4404 H4 Art.-No. 4624. 2194 2204 2214
p [barg] 0,5 – 250 0,5 – 180 0,5 – 92,5
S/G/L
p [psig] 7,3 – 3626 7,3 – 2611 7,3 – 1342
Outlet body deep-drawn
All body and H2 Art.-No. 4624. 2952 2962 2972
trim parts 1.4404 H4 Art.-No. 4624. 2954 2964 2974
p [barg] 0,5 – 250 0,5 – 180 0,5 – 92,5
S/G/L
p [psig] 7,3 – 3626 7,3 – 2611 7,3 – 1342

25

Com_Perf_DEPF_Kuka.indd 25 11.05.12 16:14

 Type 462 HDD
Article numbers

O-ring disc

Article numbers
Actual Orifice diameter d0 [mm] 9 13
Actual Orifice area A0 [mm2] 63,6 133
Actual Orifice diameter d0 [inch] 0,354 0,512
Actual Orifice area A0 [inch2] 0,099 0,206
O-ring material NBR “N” J30
CR “K” J21
EPDM “D” J22
FKM “L” J23
FFKM “C” J20
Body material: 1.4404 (316L)
All body and 1.4404 H2 Art.-No. 4624. 2252 2272
trim parts H4 Art.-No. 4624. 2254 2274
p [barg] 0,5 – 350 0,5 – 180
S/G/L
p [psig] 7,3 – 5076 7,3 – 2611

26

Com_Perf_DEPF_Kuka.indd 26 11.05.12 16:14

 Type 459, 459 HDD, 462, 462 HDD
Available Options

Male thread Female thread Flanged version Solar valve

N80

4592.2482
4592.2484

Type 459 Type 459 Type 462

Stellited sealing surface Disc with inserted Soft seal o-ring disc
J25: Disc stellited sealing plate J30: NBR “N”
L20: Base/inlet body J44: PTFE-FDA “N” J21: CR “K”
J48: PCTFE “D” J22: EPDM “D”
J49: VESPEL-SP “K” J23: FKM “L”
J20: FFKM “C”

Heating jacket Balanced bellows INCONEL X-750 spring Special material

H29 X08 2.4610 Hastelloy® C4
2.4360 Monel® 400
1.4462 Duplex

Code
YYYY
Code Code
XXXX ZZZZ

Lift indicator Test gag O-ring-damper H2 O-ring-damper H4

J93: Lift indicator J69: H4 J65 J66
J70: H2

27

Com_Perf_DEPF_Kuka.indd 27 11.05.12 16:14

 LESER worldwide
LESER UK André Ramseyer AG Hong Kong LESER
Bristol, Flamatt, Switzerland Shenzen, China
United Kingdom info@[Link] sales@[Link]
sales@[Link]

LESER Polska
Poznan, Poland
leser@[Link]

LESER LLC LESER S.A.R.L.

Charlotte (NC), Toulouse, France
USA contact@[Link]
salesus@[Link] LESER LLP
Singapore
sales@[Link]

LESER LTDA.
Rio de Janeiro, Brazil
[Link]@[Link] LESER Office FAINGER LESER Valves
Middle East Mumbai, India
Bahrain info@[Link]
LESER representative gopal.n@[Link]

LESER stock and local assembly

Compact Performance Catalog

Edition July 2012/1.000
0777.5681

[Link]
LESER GmbH & Co. KG 20537 Hamburg, Wendenstr. 133-135 Fon +49 (40) 251 65-100 E-Mail: sales@[Link]
20506 Hamburg, P.O. Box 26 16 51 Fax +49 (40) 251 65-500 [Link]

Com_Perf_DEPF_Kuka_Corrections_12_07_2012_SH.indd 1 19.07.2012 [Link]