Scribd
Upload
103 views2 pages

Shear Connection Design Analysis

The document provides the results of a design check for a steel connection (Connection 1V) between a beam and column flange using a single plate. The demands on the connection are from a 25 kip dead load. The design check verifies that the capacities exceed the demands for various limit states including bolt shear, bolt bearing, plate yielding, weld capacities, and punching shear. The minimum strength ratio across all limit states is 0.91, indicating the connection design is adequate.

Uploaded by

Mohit Gill
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
103 views2 pages

Shear Connection Design Analysis

The document provides the results of a design check for a steel connection (Connection 1V) between a beam and column flange using a single plate. The demands on the connection are from a 25 kip dead load. The design check verifies that the capacities exceed the demands for various limit states including bolt shear, bolt bearing, plate yielding, weld capacities, and punching shear. The minimum strength ratio across all limit states is 0.91, indicating the connection design is adequate.

Uploaded by

Mohit Gill
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Current Date: 27-04-2023 16:13

Units system: English

Steel Connections
Results

Connection: 1V - SP BCF
-------------------------------------------------------------------------------------------------------
Family: Beam - Column flange (BCF)
Type: Single plate
-------------------------------------------------------------------------------------------------------

Design code: AISC 360-16 LRFD

Demands
Beam Column
Description Ru Pu Pu Mu22 Mu33 Load type
[kip] [kip] [kip] [kip*ft] [kip*ft]
---------------------------------------------------------------------------------------------------
DL 25.00 0.00 0.00 0.00 0.00 Design
---------------------------------------------------------------------------------------------------

Geometric Considerations
Dimensions Unit Value Min. Max. Sta. References
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Shear plate
Thickness [in] 0.75 -- 1.82 p. 10-89

Length [in] 6.00 3.17 6.34 p. 10-104


Thickness, precludes a punching failure of the HSS... [in] 0.75 -- --
Vertical edge distance [in] 1.50 1.25 -- Tables J3.4,
J3.5
Horizontal edge distance [in] 1.50 1.25 -- Tables J3.4,
J3.5
Vertical center-to-center spacing (pitch) [in] 3.00 2.67 7.44 Sec. J3.5
Horizontal center-to-center spacing (gage) [in] 3.00 2.67 7.44 Sec. J3.5
Eccentricity [in] 4.00 4.00 --
Beam
Vertical edge distance [in] 2.56 1.25 -- Tables J3.4,
J3.5
Horizontal edge distance [in] 2.00 1.25 -- Tables J3.4,
J3.5

Support
Maximum value of the specified yield stress [Kip/in2] 46.00 -- --
Yield stress to tensile stress ratio 0.79 -- 0.80 Table K2.1
Weld size [1/16in] 8 8 -- p. 10-87
Weld length [in] 6.00 2.00 -- Sec. J2.2b

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Design Check
Verification Unit Capacity Demand Ctrl EQ Ratio References
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Shear plate
Bolts shear [Kip] 53.25 25.00 DL 0.47 Tables (7-1..14)
Bolt bearing under shear load [Kip] 92.21 25.00 DL 0.27 p. 7-18,
Sec. J3.10
Shear yielding [Kip] 97.20 25.00 DL 0.26 Eq. J4-3
Shear rupture [Kip] 70.96 25.00 DL 0.35 Eq. J4-4
Block shear [Kip] 97.57 25.00 DL 0.26 Eq. J4-5
Flexural rupture [Kip] 70.96 25.00 DL 0.35 p. 9-10

Plate (support side)


Weld capacity [Kip] 133.64 25.00 DL 0.19 Tables 8-4 .. 8-11
Shear yielding/buckling and flexure yielding 1.00 0.28 DL 0.28 Eq. 10-5

Beam
Bolt bearing under shear load [Kip] 58.81 25.00 DL 0.43 p. 7-18,
Sec. J3.10
Shear yielding [Kip] 75.52 25.00 DL 0.33 Eq. J4-3

Support
Welds rupture [Kip/ft] 145.74 33.33 DL 0.23 p. 9-5
Punching shear (shear rupture) [Kip] 27.33 25.00 DL 0.91 p. 10-153

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Global critical strength ratio 0.91


-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Notes
The plate is designed with the extended configuration criteria.

You might also like