PROFESSIONAL LAUNDRY

Washer extractor
W4330S
Features and benefits
• Frequency-controlled motor with fixed wash and extraction speeds
ensures smooth action in the wash and extraction sequence
• Good dewatering ability due to higher G-force compared with a
traditional solid mount machine
• Solid mount construction with robust frame in galvanized steel
• Available with two types of program controls:
Compass Control ® with:
– Large display and one dial for easy program selection
– Language selection
– Two Quick Start buttons for frequently used wash programs
– Wash program packages optimized on Economy,
Performance and Time
Clarus Control ® with:
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• AS – Automatic Savings:
– The machine weighs the linen and adjusts the amount of water
and energy according to the load. This leads to considerable
savings in case the machine is not fully loaded
• Extremely low water and energy consumption – see table below
• Four compartment soap box for manual dosing of powder or liquid
detergent
• Large door opening for easy loading/unloading
• Stainless and galvanized steel in all vital parts for high degree of rust
protection
• SuperBalanceTM guarantees the correct extraction force Compass Control
Images shown are a representation of the product only and
variations may occur.
Main options
• Automatic liquid detergent supply (optional I/O board for
Compass Control)
• Stainless steel front panel
• Stainless steel side panel (only with Clarus Control)
• Dual drain valves for water re-use (Clarus Control)
Clarus Control

Main specifications W4330S

Max. capacity kg/lb 35/75
Drum, volume litre 330
diameter ø mm 795
Extraction rpm 671
G-factor 200
Heating alternatives, 230/400V electricity kW 19.7
steam x
non-heated x

Consumption data ”Normal 60°C” * (3G01) El Steam

Total time min 50 **
Water consumption (cold/hot) litre 234/62 234/62
Energy consumption (motor/heating) kWh 0.4/1.6 0.4
Steam consumption kg - 2.4
* Water temperature 15°C cold water and 65°C hot water.
** Depending on steam pressure.

Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.
 Electrical connections* W4330S
Heating Voltage
El. 230V 3 AC 50 Hz kW(A) 19.7(63)
208-240V 3AC 60 Hz kW(A) 21.2(63) A
400-415V 3N AC 50 Hz kW(A) 19.7(35)
8 7
Steam 208-240V 1AC 50/60 Hz kW(A) 1.5(10)
or
non-heated
Water and steam connection
10
Water valves DN 20
Water pressure kPa 150-400 C
Capacity at 300 kPa l/min 60
Drain valve ø mm 75
Draining capacity l/min 170
Steam valve DN 15
D
Steam pressure kPa 300-600
Liquid detergent supplies 5
5281
Floor requirements
Front
Frequency of the dynamic force Hz 11.2
Floor load at max extraction kN 4.3 ± 6.9
Sound levels B
Sound pressure level** dB(A) 70
Sound power level (IEC 60704-2-4)
wash dB(A) 70
extraction dB(A) 77
Heat emission
% of installed power, max 5
Shipping data
net, kg 298
crated, kg 318
Shipping volume m3 1.82
5
Accessories
Hose kits for water or steam x
E
Dimensions in mm 5282

A Width 910 Right side

B Depth 1040
C Height 1445
D 500
O
E 1075
F 1155
N L 3
G 45
H 1365 G I 2 9
I 170 6
K 1325 4
L 255
M 1155 1

N 280
O 335
P 145 H
R 180 K

F M
1 Electrical connections 6 Liquid supply connections
2 Cold water 7 Control panel
3 Hot water 8 Soap box
4 Steam connection 9 Connections for water re-use
We reserve the right to alter specifications without notice.

5 Drain 10 Door opening ø435 P

5459
Front and side panels in light grey with ”Blue Wave” on front panel (RAL 260 70 05, 250 60 30) 5 R
* Other voltages available, see installation manual
** Approx. value at operators position in a mid-size laundry room
Rear side
Art. No. 438913571/2011.09.19

[Link]/laundrysystems

Share more of our thinking at [Link]