48TL200
Sodium Nickel Chloride Technology
Applications and Key Benefits
- Use of sodium and nickel as active materials,
48V sodium nickel chloride battery,
with solid ceramic electrolyte
specifically designed for telecom application
- Active materials contained in sealed steel sheet cells
Suitable for:
- “hot battery” - internal operating temperature
- Hybrid or off-grid installation
around 300°C / 572°F
- Installation in remote location
- Use with renewable energy (Wind / Solar) - Made with 2,58 Volt cells with 140 Wh/kg /
- Frequent power outages 310 Wh/Ib and 280 Wh/liter specific density
- Extreme temperature conditions - Proven technology for energy storage
- Installation with very compact and clean powering of electric vehicles
space availability
Constant performance at -20° to +60°C / -4°F to 140°F
No cooling required
>2000 cycles at 80% DoD
100% maintenance free in operation Environment
Allows remote monitoring
- Zero ambient emission:
Specific energy 70% lighter and
can be installed in a sealed environment
30% smaller than conventional batteries
- Battery outside temperature only few
Very low total cost of ownership (TCO)
compared to other battery technologies degrees above the ambient temperature
Very long shelf live without maintenance - Efficient material usage and 100% recyclable:
Capacity to store energy indefinitely stainless steel, nickel, iron, salt, ceramic
when not connected - Free of toxic materials: no lead or cadmium
No outgassing and zero ambient emission - RoHs compliant
- Technical Features
- Steel cell case and double stainless steel battery case
- Integrated battery monitoring system (BMS)
for monitoring, diagnostics and data logging
- User interface on front panel
- Ready for remote diagnostics and monitoring
- Compatible with any DC power supply
and standard telecom rectifiers
- Scalable with parallel operation
- No memory effect
- Typical failure mode (internal short) does not
develop violent energy release - batteries remain
in operation with slight loss of performance
- BMS diagnostics alert on anomalies and
disconnect the battery in case of serious failure
- Supplementary protection with an independent
circuitry in the event of BMS failure
- Integrated low voltage disconnect (LVD)
48TL200
48TL200 Technical Data
Electrical Characteristics
Nominal Voltage 48 VDC
Open Circuit Voltage 51.6V
Bus Voltage Range 53 to 59 V
Nominal Capacity 200 Ah at C4 to 42V
Nominal Energy 9600 Wh at C4 to 42V
Gravimetric Energy Density 91 Wh / Kg - 41 Wh / lb
Volumetric Energy Density 108 Wh / liter
Max Continuous Discharge Current 100 Amps
Faradic Charge Efficiency 100%
Operating Conditions
Operating Temperature Range -20°C to + 60°C / -4°F to 140°F continuous
Warm-up Time to be Operational < 14 hours
FIAMM reserves the right to change or revise without notice any information or detail given in this publication
Thermal Losses in Operation 105 W
Nr of Cycles > 2000 Cycles at 80% DoD
IP Rating IP-55
Communication
Data Interface Protocol RS 485 / USB / Ethernet / CAN-bus
Alarm Dry Contact NO / NC 230 Vac / 2 A
Dimensions
Front 496 mm / 19.5 in.
Depth 558 mm / 21.9 in.
Height 320 mm / 12.6 in.
Weight 105 kg / 231 lb 48TL200_GLOBAL_2011_08_05
Applicable Standards FIAMM Manufacturing
- EN 61000-6-1 - Over 10 years experience with sodium nickel chloride
- CE technology and application in electric vehicles
- CAS Nr 7440-02-0 - Nickel specification
- ISO 9001 Quality Management System
- ISO 14001 Environmental Management System
FIAMM S.p.A.
Industrial Batteries
[Link]
email:[Link]@[Link]
