Code No: R1922041 R19 SET - 1
II B. Tech II Semester Regular Examinations, August/September - 2021
ELECTRONIC CIRCUIT ANALYSIS
(Electronics Communication Engineering)
Time: 3 hours Max. Marks: 75
Answer any FIVE Questions each Question from each unit
All Questions carry Equal Marks
~~~~~~~~~~~~~~~~~~~~~~~~~
1 a) Draw the hybrid-π model of common emitter configuration and describe each [8M]
component in the π-model.
b) Derive the equation for voltage gain bandwidth product for CE amplifier. [7M]
Or
2 a) Derive the expression for voltage gain of a common source FET amplifier with [8M]
and without source resistance included in the circuit.
b) In the CS amplifier RL=5KΩ, RG=10 MΩ, µ=50 and rd = 35 KΩ. Evaluate [7M]
voltage gain, input impedance and output impedance.
3 a) With the help of a neat circuit diagram, describe the working of a cascode [8M]
amplifier.
b) Explain three types of coupling methods used in multistage amplifiers. [7M]
Or
4 a) Draw the circuit diagram, equivalent circuit of a Darlington pair and derive [8M]
expressions for overall voltage gain and input impedance.
b) An amplifier consists of 3 identical stages in cascade, the bandwidth of overall [7M]
amplifier extends from 20Hz to 20kHz. Calculate the bandwidth of individual
stage?
5 a) Explain the concept of feedback with block diagram. What are the advantages [8M]
and disadvantages of negative feedback?
b) Show that current–series negative feedback increases the input impedance and [7M]
increases the output impedance.
Or
6 a) Draw the circuit diagram of a current series feedback amplifier, Derive [8M]
expressions of input & output impedances, Gain, feedback factor?
b) If negative feedback with a feedback factor, β of 0.1 is introduced into an [7M]
amplifier with a gain of 20 and bandwidth of 0.6 MHz, obtain the resulting
bandwidth of the feedback amplifier.
7 a) Derive the expression for frequency of oscillation and condition for sustained [8M]
oscillations of a Colpitts oscillator.
b) Define the basic conditions for oscillations and classify oscillators? [7M]
Or
8 a) Explain why RC Phase shift oscillators are not used at high frequencies? With [8M]
the help of diagram explain the operation of RC phase shift oscillator?
b) Why LC oscillators are not used at low frequencies. Derive the expression for [7M]
frequency of oscillation for LC oscillator?
9 a) Give the expression for d.c power input, a.c power output and efficiency of a [8M]
series fed, directly coupled class A amplifier?
b) What is thermal resistance? Explain the thermal-electrical analogy related to a [7M]
transistor with heat sink?
Or
1 of 2
|''||''||''||''''|||
Code No: R1922041 R19 SET - 1
10 a) Draw and explain the circuit of double tuned amplifier with the help of [8M]
frequency response?
b) A single tuned RF amplifier uses a transistor with an output resistance of 60k, [7M]
output capacitance of 20pF and input resistance of next stage is 20kΩ. The tuned
circuit consists of 47pF capacitance in parallel with series combination of 1µH
inductance and 4Ω resistance. Calculate i) Resonant frequency ii) Effective
quality factor iii) Bandwidth of the circuit
2 of 2
|''||''||''||''''|||
