SGM8552

Single-Supply, Dual Rail-to-Rail I/O

Precision Operational Amplifier
GENERAL DESCRIPTION FEATURES
The SGM8552 is a dual, precision operational amplifier ● Low Offset Voltage: 20μV (MAX)
which can operate from 2.5V to 5.5V single supply. The ● Ultra-Low Input Bias Current: 10pA
device provides rail-to-rail input and output operation. ● Large-Signal Voltage Gain: 145dB (TYP) at 5V
● PSRR: 110dB (TYP)
The SGM8552 offers a low offset voltage less than
● CMRR: 105dB (TYP)
20μV and an ultra-low bias current of 10pA. The
● Overload Recovery Time: 60μs (at VS = 5V)
combination of characteristics makes the SGM8552 a
● Rail-to-Rail Input and Output
good choice for temperature measurements, pressure
● Supply Voltage Range: 2.5V to 5.5V
and position sensors, strain gauge amplifiers and medical
● Low Supply Current: 930μA (TYP)
instrumentation, or any other 2.5V to 5.5V applications
● No External Capacitors Required
requiring precision and long-term stability.
● -40℃ to +125℃ Operating Temperature Range
The SGM8552 is available in Green SOIC-8 and ● Available in Green SOIC-8 and MSOP-8 Packages
MSOP-8 packages and ESD (HBM) reaches 8kV. It is
specified over the extended industrial temperature
range (-40℃ to +125℃). APPLICATIONS
Pressure Sensors
Temperature Measurements
Precision Current Sensing
Electronic Scales
Strain Gauge Amplifiers
Handheld Test Equipment
Thermocouple Amplifiers
Medical Instrumentation

SG Micro Corp JANUARY 2013 – REV. A. 4

[Link]
 Single-Supply, Dual Rail-to-Rail I/O
SGM8552 Precision Operational Amplifier

PACKAGE/ORDERING INFORMATION
SPECIFIED
PACKAGE ORDERING PACKAGE PACKING
MODEL TEMPERATURE
DESCRIPTION NUMBER MARKING OPTION
RANGE
SGM8552XS8
SOIC-8 -40℃ to +125℃ SGM8552XS8G/TR XXXXX
Tape and Reel, 2500
SGM8552
SGM8552
MSOP-8 -40℃ to +125℃ SGM8552XMS8G/TR XMS8 Tape and Reel, 3000
XXXXX

MARKING INFORMATION
NOTE: XXXXX = Date Code and Vendor Code.
XXXXX
Vendor Code
Date Code - Week
Date Code - Year

Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.

ABSOLUTE MAXIMUM RATINGS can cause damage. ESD damage can range from subtle
Supply Voltage................................................................... 6V performance degradation to complete device failure. Precision
Input Voltage Range ................................ -VS to (+VS) + 0.1V integrated circuits may be more susceptible to damage
Differential Input Voltage Range ............................. -5V to 5V because even small parametric changes could cause the
Junction Temperature .................................................+150℃ device not to meet the published specifications.
Storage Temperature Range ....................... -65℃ to +150℃
Lead Temperature (Soldering, 10s) ............................+260℃ DISCLAIMER
ESD Susceptibility SG Micro Corp reserves the right to make any change in
HBM ............................................................................. 8000V circuit design, or specifications without prior notice.
MM ................................................................................. 400V
PIN CONFIGURATION
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range ..................... -40℃ to +125℃ (TOP VIEW)

OVERSTRESS CAUTION OUTA 1 8 +VS

Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods -INA 2 _ 7 OUTB
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended +INA 3 + _ 6 -INB
Operating Conditions section is not implied.

ESD SENSITIVITY CAUTION -VS 4 + 5 +INB

This integrated circuit can be damaged if ESD protections are

not considered carefully. SGMICRO recommends that all SOIC-8/MSOP-8
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures

SG Micro Corp JANUARY 2013

[Link]
2
 Single-Supply, Dual Rail-to-Rail I/O
SGM8552 Precision Operational Amplifier

ELECTRICAL CHARACTERISTICS
(At TA = +25℃, VS = 5V, VCM = 2.5V, VOUT = 2.5V, Full = -40℃ to +125℃, unless otherwise noted.)
PARAMETER CONDITIONS TEMP MIN TYP MAX UNITS
Input Characteristics
+25℃ 4 20
Input Offset Voltage (VOS) μV
Full 24
Input Bias Current (IB) +25℃ 10 pA
Input Offset Current (IOS) +25℃ 5 pA
Input Voltage Range +25℃ 0 5 V
+25℃ 90 105
Common Mode Rejection Ratio (1) (CMRR) VCM = 0V to 5V dB
Full 83
+25℃ 100 145
Large-Signal Voltage Gain (AVO) RL = 10kΩ, VOUT = 0.3V to 4.7V dB
Full 97
Input Offset Voltage Drift (ΔVOS/ΔT) Full 20 nV/℃
Output Characteristics
+25℃ 4.99 4.998
RL = 100kΩ to -VS
Full 4.987
Output Voltage High (VOH) V
+25℃ 4.985 4.996
RL = 10kΩ to -VS
Full 4.98
+25℃ 2 10
RL = 100kΩ to +VS
Full 13
Output Voltage Low (VOL) mV
+25℃ 6 15
RL = 10kΩ to +VS
Full 20
+25℃ 40 48
Short-Circuit Limit (ISC) VOUT = 2.5V, RL = 10Ω to GND mA
Full 23
Power Supply
+25℃ 90 110
Power Supply Rejection Ratio (1) (PSRR) VS = 2.5V to 5.5V dB
Full 80
+25℃ 930 1110
Quiescent Current (IQ) VOUT = VS/2 μA
Full 1760
Dynamic Performance
Gain-Bandwidth Product (GBP) AV = +100 +25℃ 1.53 MHz
Slew Rate (SR) AV = +1, RL = 10kΩ, 2V output step +25℃ 0.90 V/μs
Overload Recovery Time AV = -100, RL = 10kΩ, VIN = 200mV (RET to GND) +25℃ 0.06 ms
Noise Performance
Input Voltage Noise (en P-P) 0.1Hz to 10Hz +25℃ 0.80 μVP-P
Input Voltage Noise Density (en) f = 1kHz +25℃ 47.5 nV/ Hz

NOTE: 1. PSRR and CMRR are affected by the matching between external gain-setting resistor ratios.

SG Micro Corp JANUARY 2013

[Link]
3
 Single-Supply, Dual Rail-to-Rail I/O
SGM8552 Precision Operational Amplifier

ELECTRICAL CHARACTERISTICS (continued)

(At TA = +25℃, VS = 2.5V, VCM = 1.25V, VOUT = 1.25V, Full = -40℃ to +125℃, unless otherwise noted.)
PARAMETER CONDITIONS TEMP MIN TYP MAX UNITS
Input Characteristics
+25℃ 3 20
Input Offset Voltage (VOS) μV
Full 24
Input Bias Current (IB) +25℃ 10 pA
Input Offset Current (IOS) +25℃ 10 pA
Input Voltage Range +25℃ 0 2.5 V
+25℃ 90 105
Common Mode Rejection Ratio (1) (CMRR) VCM = 0V to 2.5V dB
Full 81
+25℃ 100 135
Large-Signal Voltage Gain (AVO) RL = 10kΩ, VOUT = 0.3V to 2.4V dB
Full 94
Input Offset Voltage Drift (ΔVOS/ΔT) Full 20 nV/℃
Output Characteristics
+25℃ 2.49 2.499
RL = 100kΩ to -VS
Full 2.488
Output Voltage High (VOH) V
+25℃ 2.485 2.498
RL = 10kΩ to -VS
Full 2.482
+25℃ 1 10
RL = 100kΩ to +VS
Full 12
Output Voltage Low (VOL) mV
+25℃ 3 15
RL = 10kΩ to +VS
Full 18
+25℃ 20 28
Short-Circuit Limit (ISC) VOUT = 1.25V, RL = 10Ω to GND mA
Full 15
Power Supply
+25℃ 90 110
Power Supply Rejection Ratio (1) (PSRR) VS = 2.5V to 5.5V dB
Full 80
+25℃ 1000 1110
Quiescent Current (IQ) VOUT = VS/2 μA
Full 2090
Dynamic Performance
Gain-Bandwidth Product (GBP) AV = +100 +25℃ 1.51 MHz
Slew Rate (SR) AV = +1, RL = 10kΩ, 2V output step +25℃ 0.90 V/μs
Overload Recovery Time AV = -100, RL = 10kΩ, VIN = 200mV (RET to GND) +25℃ 0.03 ms
Noise Performance
Input Voltage Noise (en P-P) 0.1Hz to 10Hz +25℃ 0.95 μVP-P
Input Voltage Noise Density (en) f = 1kHz +25℃ 53 nV/ Hz

NOTE: 1. PSRR and CMRR are affected by the matching between external gain-setting resistor ratios.

SG Micro Corp JANUARY 2013

[Link]
4
 Single-Supply, Dual Rail-to-Rail I/O
SGM8552 Precision Operational Amplifier

TYPICAL PERFORMANCE CHARACTERISTICS

Large Signal Transient Response at +5V Large Signal Transient Response at +2.5V

V OUT (500mV/div)
V OUT (1V/div)

CL = 300pF CL = 300pF
RL = 2kΩ RL = 2kΩ
A V = +1 A V = +1

Time (5µs/div) Time (2µs/div)

Small Signal Transient Response at +5V Small Signal Transient Response at +2.5V

CL = 50pF CL = 50pF
RL = ∞ RL = ∞
A V = +1 A V = +1
V OUT (50mV/div)
V OUT (50mV/div)

Time (5µs/div) Time (5µs/div)

Closed Loop Gain vs. Frequency at +5V Closed Loop Gain vs. Frequency at +2.5V
60 60
50 50
A V = -100 40 A V = -100
Closed Loop Gain (dB)

40
Closed Loop Gain (dB)

30 30
20 20
10 A V = -10 10 A V = -10
0 0
-10 A V = +1
-10 A V = +1
-20 -20
-30 -30
-40 -40
10 100 1000 10000 10 100 1000 10000

Frequency (kHz) Frequency (kHz)

SG Micro Corp JANUARY 2013

[Link]
5
 Single-Supply, Dual Rail-to-Rail I/O
SGM8552 Precision Operational Amplifier

TYPICAL PERFORMANCE CHARACTERISTICS (continued)

Positive Overvoltage Recovery Negative Overvoltage Recovery

0V V IN 200mV
200mV
V IN V SY = ±2.5V /div
/div 0V
V IN = -200mV P-P V SY = ±2.5V
(RET to GND) V IN = +200mV P-P
CL = 0pF (RET to GND)
V OUT RL = 10kΩ 0V CL = 0pF
A V = -100 1V 1V
RL = 10kΩ
/div /div
A V = -100
0V
V OUT

Time (20µs/div) Time (50µs/div)

Open Loop Gain, Phase Shift Open Loop Gain, Phase Shift
vs. Frequency at +5V vs. Frequency at +2.5V
60 120 60 120
50 CL = 0pF 50 CL = 0pF
Phase Shift RL = ∞ Phase Shift RL = ∞
Phase Shift (Degrees)

40 96 40 96

Phase Shift (Degrees)

Open Loop Gain (dB)
Open Loop Gain (dB)

30 30
20 72 20 72
10 10
0 48 0 48
-10 -10 Open Loop Gain
Open Loop Gain
-20 24 -20 24
-30 -30
-40 0 -40 0
10 100 1000 10000 100000 10 100 1000 10000 100000
Frequency (kHz) Frequency (kHz)

0.1Hz to 10Hz Noise at +5V 0.1Hz to 10Hz Noise at +2.5V

Noise (2mV/div)

Noise (2mV/div)

A V = +10,000 A V = +10,000

Time (10s/div) Time (10s/div)

SG Micro Corp JANUARY 2013

[Link]
6
 Single-Supply, Dual Rail-to-Rail I/O
SGM8552 Precision Operational Amplifier

TYPICAL PERFORMANCE CHARACTERISTICS (continued)

Voltage Noise Density at +5V Voltage Noise Density at +2.5V

from 0.1Hz to 2.5kHz from 0.1Hz to 2.5kHz
104 104
RS = 0Ω RS = 0Ω
91 91
78 78

en (nV/ √Hz)
en (nV/ √Hz)

65 65
52 52
39 39
26 26
13 13
0 0
0 0.5 1 1.5 2 2.5 0 0.5 1 1.5 2 2.5
Frequency (kHz) Frequency (kHz)

Voltage Noise Density at +5V Voltage Noise Density at +2.5V

from 0.1Hz to 25kHz from 0.1Hz to 25kHz
128 128
112 112
96 96
en (nV/ √Hz)
en (nV/ √Hz)

80 80
64 64
48 48
32 32
16 RS = 0Ω 16 RS = 0Ω
0 0
0 5 10 15 20 25 0 5 10 15 20 25
Frequency (kHz) Frequency (kHz)

PSRR vs. Frequency at ±2.5V PSRR vs. Frequency at ±1.25V

100 100
90 90
80 80
+PSRR
70 70
PSRR (dB)
PSRR (dB)

60 60 +PSRR
50 50
-PSRR
40 40
30 30 -PSRR
20 20
10 10
0 0
0.1 1 10 100 1000 10000 0.1 1 10 100 1000 10000
Frequency (kHz) Frequency (kHz)

SG Micro Corp JANUARY 2013

[Link]
7
 Single-Supply, Dual Rail-to-Rail I/O
SGM8552 Precision Operational Amplifier

TYPICAL PERFORMANCE CHARACTERISTICS (continued)

CMRR vs. Frequency at +5V CMRR vs. Frequency at +2.5V

100 100

80 80

CMRR (dB)
CMRR (dB)

60 60

40 40

20 20

0 0
0.1 1 10 100 1000 0.1 1 10 100 1000
Frequency (kHz) Frequency (kHz)

Offset Voltage Production Distribution at +5V Offset Voltage Production Distribution at +2.5V
32 40
V S = +5V V S = +2.5V
Percentage of Amplifiers (%)

Percentage of Amplifiers (%)

28 35
V CM = 2.5V V CM = 1.25V
24 TA = +25℃ 30 TA = +25℃
20 25
16 20
12 15
8 10
4 5
0 0
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
11

-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
Offset Voltage (μV) Offset Voltage (μV)

SG Micro Corp JANUARY 2013

[Link]
8
 Single-Supply, Dual Rail-to-Rail I/O
SGM8552 Precision Operational Amplifier

REVISION HISTORY
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

JANUARY 2013 ‒ REV.A.3 to REV.A.4 Page

Added Tape and Reel Information section ................................................................................................................................................... 12, 13

DECEMBER 2011 ‒ REV.A.2 to REV.A.3 Page

Changed Electrical Characteristics section ...................................................................................................................................................... 3, 4
Changed Typical Performance Characteristics section ........................................................................................................................................ 7
Changed Package Outline Dimensions section ............................................................................................................................................. 9, 10

MAY 2011 ‒ REV.A.1 to REV.A.2 Page

Changed packages’ name ................................................................................................................................................................................. All

APRIL 2010 ‒ REV.A to REV.A.1 Page

Changed Typical Performance Characteristics section ........................................................................................................................................ 8

Changes from Original (MARCH 2010) to REV.A Page

Changed from product preview to production data ............................................................................................................................................. All

SG Micro Corp JANUARY 2013

[Link]
9
 PACKAGE INFORMATION

PACKAGE OUTLINE DIMENSIONS

SOIC-8

0.6
D
e

2.2

E1 E
5.2

1.27

RECOMMENDED LAND PATTERN (Unit: mm)

A1 θ c
A2

Dimensions Dimensions
Symbol In Millimeters In Inches
MIN MAX MIN MAX
A 1.350 1.750 0.053 0.069
A1 0.100 0.250 0.004 0.010
A2 1.350 1.550 0.053 0.061
b 0.330 0.510 0.013 0.020
c 0.170 0.250 0.006 0.010
D 4.700 5.100 0.185 0.200
E 3.800 4.000 0.150 0.157
E1 5.800 6.200 0.228 0.244
e 1.27 BSC 0.050 BSC
L 0.400 1.270 0.016 0.050
θ 0° 8° 0° 8°

SG Micro Corp TX00010.000

[Link]
 PACKAGE INFORMATION

PACKAGE OUTLINE DIMENSIONS

MSOP-8

E1 E
4.8

1.02
e

0.41 0.65

RECOMMENDED LAND PATTERN (Unit: mm)

A1 c
A2
θ

Dimensions Dimensions
Symbol In Millimeters In Inches
MIN MAX MIN MAX
A 0.820 1.100 0.032 0.043
A1 0.020 0.150 0.001 0.006
A2 0.750 0.950 0.030 0.037
b 0.250 0.380 0.010 0.015
c 0.090 0.230 0.004 0.009
D 2.900 3.100 0.114 0.122
E 2.900 3.100 0.114 0.122
E1 4.750 5.050 0.187 0.199
e 0.650 BSC 0.026 BSC
L 0.400 0.800 0.016 0.031
θ 0° 6° 0° 6°

SG Micro Corp TX00014.000

[Link]
 PACKAGE INFORMATION

TAPE AND REEL INFORMATION

REEL DIMENSIONS

TAPE DIMENSIONS

P2 P0

W
Q1 Q2 Q1 Q2 Q1 Q2
B0
Q3 Q4 Q3 Q4 Q3 Q4

Reel Diameter

P1 A0 K0

Reel Width (W1)

DIRECTION OF FEED

NOTE: The picture is only for reference. Please make the object as the standard.

KEY PARAMETER LIST OF TAPE AND REEL

Reel Width
Reel A0 B0 K0 P0 P1 P2 W Pin1
Package Type W1
Diameter (mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
(mm)

SOIC-8 13″ 12.4 6.40 5.40 2.10 4.0 8.0 2.0 12.0 Q1

DD0001
MSOP-8 13″ 12.4 5.20 3.30 1.50 4.0 8.0 2.0 12.0 Q1

SG Micro Corp TX10000.000

[Link]
 PACKAGE INFORMATION
CARTON BOX DIMENSIONS

NOTE: The picture is only for reference. Please make the object as the standard.

KEY PARAMETER LIST OF CARTON BOX

Length Width Height

Reel Type Pizza/Carton
(mm) (mm) (mm) DD0002

13″ 386 280 370 5

SG Micro Corp TX20000.000

[Link]