33333333333

CONTENTS
PROGRAMME CALENDAR Sl. Page

2023-24
No No.
About Us 3
Preface 5
General Instructions 6
Norms of the Programmes
I. Contact Mode 6
II. ICT Mode 7
III. In-House Programmes 8
IV. Special Programmes 8
V. Collaborative Programmes 8
Participants Profile 8
How to Reach NITTTR, Kolkata 8
National Level Short Term Training 9 – 53
Programmes through ICT Mode
Faculty Profile 54-79
E-mail Addresses and Phone Numbers 80
of Faculty Members

visit us: [Link]

NATIONAL INSTITUTE OF TECHNIAL TEACHERS’ TRAINING AND RESEARCH, KOLKATA

Block – FC, Sector – III, Salt Lake City, Kolkata – 700 106


 TECHNICAL EDUCATION VISION
NITTTR, Kolkata envisions to be the lead resource
institute for promoting excellence in technical
TECHNICAL EDUCATION MISSION

education, management education and

vocational education & training system

 To introduce emerging scientific technologies for development of

effective teaching-learning system in technical education,
 To increase the outreach of training by adopting flexible & Open
Learning Technology,
 To integrate the world of work with the technical education system,
 To assist policy makers as a think-tank in formulating TVET strategies,
 To offer extension services and consultancy appropriate to TVET
system, in collaboration with industry and community partnership,
 To develop and introduce Quality Management System,
 To share experience and collaborate with national and international
agencies involved in technical education for mutual benefits,
 To undertake research in different areas of TVET system.


About Us

National Institute of Technical Teachers’ Training & Research (NITTTR), Kolkata was established in 1965 as Technical
Teachers’ Training Institute, Calcutta. This was the first of four such Institutes (other three being at Chandigarh, Bhopal
and Chennai) established by the Department of Education, Govt. of India as fully centrally funded Autonomous Institution.
The primary focus of the Institute is to provide in-service training to the teachers and staff of Degree and Diploma level
technical institutions and conduct activities related to the quality improvement of the technical education system of the
country. NITTTR, Kolkata has been actively involved in improvement of quality of the technical education system in various
states including those in the north-east through innovative academic interventions, providing assistance to policy makers
at the national and state levels, in formulation of educational plans, projects and their implementation in the fast changing
scenario. By virtue of working closely over the last few decades, this institute has developed a thorough understanding of
the technical educational needs of the states in the eastern region including those in the north-east. Govt. of India, in
2003, accorded national status to the Institute, in recognition to the expert services rendered for overall improvement of
quality of Technical Education System. NITTTR, Kolkata acts as a catalyst in introducing changes in the various components
of technical education system, plays a proactive role in identifying changes in the industry, technology, economy and
society and acts as a facilitator in this process of change.

Some of the notable national level projects in which the Institute is associated are Nodal agency to Centrally Sponsored
Community Development through Polytechnic Scheme, Designing & conducting AICTE sponsored “Induction Training
Programme” for fresh teachers of engineering and polytechnic colleges, Facilitating implementation of Centrally sponsored
Scheme for Integrating Persons with Disabilities (PWD) in the mainstream of Technical & Vocational Education etc.
The focal activities of the Institute are Short Term Training, Curriculum Development, Learning Resources Development,
Research in the field of Technical Education System, Educational Management and Extension Services. Besides regular
activities, the Institute has been offering, since 2003, AICTE approved M. Tech. Degree Programme in Manufacturing
Technology, affiliated to WBUT. During 2005-2006 two more M. Tech. Programmes namely Multimedia & Software Systems
and Mechatronics Engineering were started. The M. Tech. Programme in Structural Engineering was also started from
2011-12. The Institute has highly qualified faculty members and excellent infrastructural support in the form of well-
equipped laboratories, computers, library facilities, Welding Centre, CAD/CAM and other resources. The institute has two
Extension Centres one at Guwahati and the other in Bhubaneswar for reaching out to its clients in the North-east and
Orissa. At present this Institution is also focusing on others, Teachers’ Training through ICT Mode.


Preface
Like previous years, National Institute of Technical Teachers’ Training and Research (NITTTR),
Kolkata has prepared its Programme Calendar for the year 2023-24.

In order to fulfill the needs of technical teachers of the country, Short- Term Training
programmes (STTP) in the following modes are planned.

1. Contact mode at NITTTR, Kolkata and/or the extension centres

2. ICT-based Programmes
3. In-House Programmes
4. Demand-based Special Programmes (both offline and online)
5. Hybrid Mode

The schedules of the trainings planned in this calendar are not exhaustive. The Institute also
provides trainings based on specific needs of various stake holders including Private Technical
Institutes following the guidelines of the Institute. Further, In-House training may be organized
to fulfil the requirement of Faculty Development Programme of various Technical Institutes.
It is intended that all Technical Institutes will come up with their needs and take advantage of
services provided by NITTTR, Kolkata. This helps to upgrade the learning-teaching system of
the institutes and in turn, enriches the education system of the country.


 NATIONAL INSTITUTE OF TECHNICALTEACHERS’ TRAINING AND RESEARCH, KOLKATA
Registration for STTP – Application Form

1 Prog. Code :

2 (a) Programme Title :

(b) Date : From: To:

(c) Prog. Coordinator(s) :

3 (a) Name (in CAPS) :

First Middle Last
(b) Designation :

(c) Department :

(d) Institution :

(e) Institute Address :

Pin:
State

(f) Caste : (g) Gender

(h) Contact Number :

Mobile

Email
4 Highest Academic Qualification:
Degree/Diploma University/Others Year of Passing Class Obtained

5 (a) Experience (in years) : Teaching Industry/Field

6. Payment of Course Fees Rs. ………………… Paid Yes No ,

If yes, Receipt No. _______________________

I promise to attend the above mentioned training programme, if selected.

Date: Signature of the Applicant
This is to certify that the applicant will be released to attend the training programme, if selected, without any financial
liability on part of the sponsoring authority.

Date: Signature of the Sponsoring Authority with Seal

NOTE: Application without Signature & Seal of the Sponsoring Authority will not be considered for
selection.
Scan copy send by Email: academic@[Link]


 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

NATIONAL LEVEL FACULTY DEVELOPMENT PROGRAMMES
Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
1. CU01C Data Analysis with 300 In-house Contact Nirmal Kumar Mandal As per - 1 All Disciplines After completion of the programme, the participants
MATLAB Request will be able to
 Model a physical system
 Classify data
 Use MATLAB
2. PS01F Effective Teaching Free In-house Contact Subrata As per - 3 Faculty of all After completion the programme, the participants
Learning Process Chattopadhyay Request Days disciplines will be able to
using Instructional  Prepare lesson Plan
Media  Design Curriculum
 Develop Instructional media
 Suggest strategies to promote creativity in
teaching-learning process
 Apply techniques for appropriate assessment and
evaluation
 Introduce problem based learning techniques
3. PS02A Advanced Pedagogy 3000 In-house Contact Sagarika Pal As per - 2 Faculty of all After completion the programme, the participants
Request disciplines will be able to
 Prepare lesson Plan
 Design Curriculum
 Develop Instructional media
 Suggest strategies to promote creativity in
teaching-learning process
 Apply techniques for appropriate assessment and
evaluation
 Introduce problem based learning techniques

4. PS03F Professional values Free Kolkata ICT Mithu Dey 03/04/2023 07/04/2023 1 All Faculty and After completion the programme, the participants
and ethcs Staff will be able to
 understand the moral values that ought to guide
the engineering profession
 create an awareness on professional Ethics and
Human Values.
 resolve the moral issues in the profession
 develop a set of beliefs, attitudes, and habits that
professional should display regarding morality
Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management
Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
5. PS04F Advanced Pedagogy Free Kolkata ICT Arpan Kumar Mondal & 03/04/2023 14/04/2023 2 Technical After completion of the programme, the participants
Sukanta Naskar teachers will be able to
from all  Explain the need of Advanced Pedagogy
 Understand the fundamental strategies of
disciplines
advanced pedagogy techniques
 Explain different Advanced Pedagogy Approaches
 Plan instruction
 Incorporate different principles for effective
delivery and assessment
6. CU02B Software Modeling 420 Kolkata Contact Samir Roy 10/04/2023 12/04/2023 3 Faculty of CSE After successful completion of this programme, the
with Unified Days / IT / MCA participants will be able to
Modeling Language disciplines • Visualize a software under development
(UML) • Create software models using UML
• Expalin the software modelin with UML
7. CU03A Modern Control 1500 Kolkata ICT Prasanta Sarkar 10/04/2023 14/04/2023 1 Faculty of After completion the programme, the participants will
Engineering be able to
Disciplines • Model physical systems in state space
• Realise state space model from Transfer function
• DetermineControllability and observability
 Design controller and observer
 Apply MATLAB Control System Toolbox
8. MGT01C Laboratory Safety 300 Kolkata Contact Subrata Mondal 10/04/2023 14/04/2023 1 Faculty of all After completion of the programme, the participants
Management disciplines and will be able to
laboratory  demonstrate the safety management in the
technicians laboratory work areas;
 evaluate the risk assessment for the hazardous
laboratory works;
 identify the emergency and safety equipment for
laboratory works;
 demonstrate fire safety management in the
laboratory work areas;
 describe the waste management for the laboratory
etc.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
9. PS05F Research Free Kolkata Contact Chandan Chakraborty 10/04/2023 14/04/2023 1 Faculty of all After completion of this programme, the participants
Methodology & disciplines will be accomplished to
Statistical  Develop understanding of the research design,
Application interdisciplinary research in the line of NEP 2020.
 Explore about systematic literature review with
PRISMA
 Excel in-depth knowledge in statistical methods
and models
 Explore testing of hypothesis for scientific
validation of research hypothesis.
 Offer Hands-on-training on statistical data analysis
 Demonstrate expertice on paper writing, thesis
reporting etc.
10. PS06C Bloom’s Taxonomy 300 Kolkata ICT Dipankar Bose 10/04/2023 14/04/2023 1 Faculty After completion of the programme, the participants
Based Question memebers of will be able to
Paper Generation all disciplines  understand Bloom’s Taxonomy – Basic Features
from different and domains
technical  prepare question papers based on Bloom’s
institutions Taxonomy
11. CU04B Clean Drinking 700 Kolkata ICT Sailendra Nath Mandal 17/04/2023 21/04/2023 1 Faculty and After attending the programme the participants will
Water and Health Staff of any be able to acquire –
discipline • knowledge of different drinking water testing
parameters, equipment, methods of testing ,
different standards and impact on human health,
•skill of online demonstration of different device,
performing experiments, interpreting results,
preparing test report, providing laboratory
instructions to develop inquiring attitude among
the student and evaluation of laboratory
performance in related to drinking water testing
laboratory,
• attitude of live online demonstration in the
laboratory/field.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
12. PS07C Design and 300 Kolkata ICT Rajeev Chatterjee & 17/04/2023 21/04/2023 1 Faculty of all After completion of the programme, the participants
Development of Ranjan Dasgupta disciplines will be able to
content for e-  explain the concept of e-learning, TEL
Learning  explain synchronous and asynchronous e-learning
models,
 explain the various standards available for e-
learning,
 explain the basis terminologies such as Learning
Objects, sharable Content Objects, SCO,
 explain and demonstrate ADDIE Model of ISD,
 Explain the importance of assessment and item
development,
 exhibit and demonstrate the process of e-content
creation for MOOCs based e-content.
 develop e-content chunks / learning object in their
own subject domain, and
 exhibit and demonstrate e-learning tools and
technology.
 Explain the concept of lifelong learning
13. PS08A Advanced Pedagogy 3000 Kolkata Hybrid Sagarika Pal & 17/04/2023 28/04/2023 2 Faculty of all After completion the programme, the participants will
Subrata disciplines be able to
Chattopadhyay  Prepare lesson Plan
 Design Curriculum
 Develop Instructional media
 Suggest strategies to promote creativity in
teaching-learning process
 Apply techniques for appropriate assessment and
evaluation
 Introduce problem based learning techniques

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
14. PS09C NBA Accreditation 300 In-house Contact Arpan Kumar Mondal 17/04/2023 21/04/2023 1 Techical After completion the programme, the participants will
and SAR Preparation teachers be able to
from all  Identify the Impact of NBA Accreditation
disciplines  Prepare Vision, Mission, PEO and PSO
 Prepare CO-PO mapping
 Prepare pre-qualifier and SAR.
 Illustrate Criteria 1 to 10
 Explain Washington accord
 Discuss the essence of CEP and LLL
15. PS10B Thesis and Research 700 Kolkata Contact Rayapati Subbarao 17/04/2023 21/04/2023 1 Faculty of all After completion of the programme, the participants
paper writing disciplines will be able to
 Describe the steps involved in writing a thesis.
 Identify the scope of a thesis.
 Construe the results in a better way.
 Derive conclusions from the plots and contours
made.
 Discover the ways of writing a research paper
 Communicate a paper in their area of research.
16. PS11C ICT Tools for 180 Kolkata ICT Kinsuk Giri 19/04/2023 21/04/2023 3 Faculty of all On successful completion of the programme the
Assessment days disciplines participants will be able to
• Illustrate the use of various ICT tools for Assessment
• Apply different online tools for online assessment
17. CU05F Introduction to Free BBSR Contact Rajeev Chatterjee 24/04/2023 28/04/2023 1 Faculty of all After completion of the programme, the participants
Coding Theory disciplines will be able to
 Explain information, quality of Information, and
Information entropy,
 Demonstrate the working principles and design of
AES, DES,
 Demonstrate various encoding techniques like
Arithmetic Encoding, Huffman Encoding, Hamming
Code, Gray code, JPEG Encoding Standard, etc.,
 Demonstrate the applications of coding techniques
in the area of Networking and Communication

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
18. CU06F Concept of Software Free Kolkata Contact Samir Roy & Ranjan 24/04/2023 28/04/2023 1 Faculty of CSE, After completion of the programme, the participants
Engineering Dasgupta IT, MCA will be able to
disciplines  explain different quality aspects of a software
 critically analyse different software development
models
 explain design theory
19. CU07F Ecology and Free Guwahati Contact Uday Chand Kumar 24/04/2023 28/04/2023 1 Teachers and After completion the programme, the participants
Environment Staffs from all will be able to
disciplines  Define Ecology and Environment
 Describe the relation between Ecology and
Environment
 Identify the causes of pollution
 Explain the role of human towards environment
20. CU08F Power Electronics Free Kolkata Hybrid Soumitra Kumar 24/04/2023 28/04/2023 1 Faculty and After completion the programme, the participants
and Drive System Mandal Lab will be able to
Technician of  Study performance characteristics of Power
Engineering Electronics Devices
and  Describe operation & control of controlled
Polytechnic converters
Colleges in EE,  Illustrate the applications of converters in Electrical
ECE ,EEE and drive System
EIE
21. CU09F Power Generation Free Kolkata ICT Sheela Yadav Rai 24/04/2023 28/04/2023 1 Faculty from After completion of the programme, the participants
from Energy all Discipline will be able to
Resources  Identify the potential sources of conventional
energies for power generation
 Describe potential sources of non-conventional
energies for power generation
 Discuss environmental aspects of power
generation
 Appreciate about various power projects
22. CU10C Automation in 300 Kolkata ICT Nirmal Kumar Mandal 24/04/2023 28/04/2023 1 Mechanical, After completion of the programme, the participants
Manufacturing Production will be able to
and Industrial  Explain Automation
 Analyse the performance of Automated
Manufacturing System

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
23. CU11C Engineering 300 Kolkata Contact Kinsuk Giri 24/04/2023 28/04/2023 1 Faculty from On successful completion of the programme, the
Optimization all Discipline participants will be able to
•Explain the need for engineering optimization
•describe the fundamentals of Optimization
techniques
•apply tools for problem solving in Optimization
24. CU12C AutoCAD for 300 Kolkata Contact Mithu Dey 01/05/2023 05/05/2023 1 Faculty of Civil After completion the programme, the participants will
Engineers , mechanical, be able to
electrical  use different commands of the Software
 Draw the 2D and 3D
 Appreciate the use of AutoCAD in Engg.
25. MGT02B Waste Management 1400 Kolkata ICT Sailendra Nath Mandal 01/05/2023 12/05/2023 2 Faculty and After attending the programme the participants will
Technology Staff of any be able to acquire –
discipline • knowledge of basic concept of solid waste,
wastewater, sampling, preservation, analysis,
standards, interpretation of result and disposal of
wastewater, Solid waste, impact on human health ,
•skill of online demonstration of different device,
performing experiments, interpreting results,
preparing test report, providing laboratory
instructions to develop inquiring attitude among
the student and evaluation of laboratory
performance in related to drinking water testing
laboratory,
• attitude of live online demonstration in the
laboratory/field.
26. CU13C SCILAB 300 Kolkata Contact Kinsuk Giri 08/05/2023 12/05/2023 1 All On successful completion of the programme the
Programming participants will be able to
• Identify the need for and use of SCILAB
• Discuss solution techniques
• solve problems using SCILAB

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
27. CU14F Topics in Algorithm Free Kolkata ICT Samir Roy & Ranjan 08/05/2023 12/05/2023 1 Faculty of CSE, After completion of the programme, the participants
Dasgupta IT, MCA will be able to
disciplines  Explain the fundamental concepts of analysis of
algorithms
 Identify different approaches to deal with
computational problems
28. CU15C Power Electronics 300 Guw Contact Soumitra Kumar 08/05/2023 12/05/2023 1 Faculty and After completion the programme, the participants
and Drive System Mandal Lab will be able to
Technician of  Study performance characteristics of Power
Engineering Electronics Devices
and  Describe operation & control of controlled
Polytechnic converters
Colleges in EE,  Discuss applications of converters in Electrical drive
ECE ,EEE and System
EIE
29. CU16C Refreshers course 300 Kolkata ICT Dipankar Bose 08/05/2023 12/05/2023 1 Faculty After completion of the programme, the participants
on Engineering members with will be able to
Mechanics specialization  identify various classifications of Engineering
ME,CE,AE, Mechanics
Production  Explain the concept of statics
Engineering  Explain the concept of dynamics
 Identify practical applications of Engineering
Mechanics
 solve numericals related to engineering mechanics

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
30. CU17A IP Networking 3000 Kolkata Contact Rajeev Chatterjee 08/05/2023 19/05/2023 2 Faculty of CSE, After completion of the programme, the participants
IT Computer will be able to
Application,  Explain the concept of Computer Network and
Electronics, Internetwork,
discipline  Demonstrate Network Media and Topology
 Identify the various components of Network and
Internetwork,
 Explain the various protocols in TCP/IP Suite,
 Explain the concept of switching and routing,
 Demonstrate configuration of the devices such as
routers, switches, etc.,
Design their own campus wide network and IT
infrastructure,
31. PS14C Induction Training 300 Kolkata e-STTP Subrata Mondal 08/05/2023 12/05/2023 1 Faculty of all After completion of the programme, the participants
disciplines will be able to
 explore duties and responsibilities of a faculty;
 explore instructional objectives and planning;
 introduce concept of active learning;
 explore various methods of teaching;
 explore classroom management;
 explore the importance of quality in education;
 explore aims of laboratory in technical education;
 explore question banking and assessment
methods;
 explore e-learning in teaching etc.
32. PS15F Role of Technical Free Kolkata ICT Sheela Yadav Rai 08/05/2023 12/05/2023 1 Faculty from  After completion of the programme, the
Institutions in all Discipline participants will be able to
Community  Identify various Community Development Schemes
Development  Explain Feasibilty Report
 Prepare Planning Report
 Make the Curricula
 Estimate the Training cost

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
33. CU18C MATLAB and its 300 Kolkata Hybrid Prasanta Sarkar 15/05/2023 19/05/2023 1 Faculty and After completion of the programme, the participants
Applications Technical Staff will be able to
of Engineering  Identify features of MATLAB commands
Disciplines  Use MATLAB Commands
 Develop MATLAB script and function files
 Solve Engineering Problems using MATLAB
34. CU19F Renewable Energy Free Kolkata Hybrid Soumitra Kumar 15/05/2023 19/05/2023 1 Faculty and After completion the programme, the participants will
and Smart Grid Mandal Lab be able to
Technician of  Describe the principles of Solar Cell
Engineering  Identify the various parameters of Solar PV system
and  Develop an in-depth knowledge about Solar PV
Polytechnic Module by performing basic experiments &
Colleges in EE, through field visit
ECe, EEE and  Describe Modelling of Solar PV system
EIE  Explain operation and Control of Solar PV system
 Explain fundamentals of Smart grid
35. PS16C Occupational Health 300 BBSR Contact Uday Chand Kumar 15/05/2023 19/05/2023 1 Teachers and After completion the programme, the participants will
and Safety Issues Staffs from all be able to
disciplines  Identify occupation related issues in various
activities.
 Develop a comprehensive action plan for safety
management.
36. PS17C NBA Accreditation 300 Kolkata ICT Rayapati Subbarao 15/05/2023 19/05/2023 1 Faculty of all After completion of the programme, the participants
and SAR preparation disciplines will be able to
 Identify the Impact of NBA Accreditation
 Prepare Vision, Mission, Program Educational
Objectives
 Prepare Outcomes and Program Outcomes
 Explain the procedure for preparing SAR.
 Establish correlations among the criteria i to x .
37. PS18F Engineering Free Kolkata e-STTP Nirmal Kumar Mandal 15/05/2023 26/05/2023 2 Faculty from After completion of the programme, the participants
Pedagogy all Disciplines will be able to
 Teach technical subjects effectively in different
domain and level of learning
 Set question papers in different domain and level
of learning

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
38. PS19F Assessment, Free Kolkata Hybrid Sagarika Pal 22/05/2023 26/05/2023 1 Faculty of all After completion of the programme, the participants
Evaluation disciplines will be able to
and Preparing  Define Measurement, Assessment, Evaluation and
Question Test
Papers  Construct the test items
 Design the table of Specification
 Prepare the question paper
 Analyse the question paper

39. CU20C Formal Languages 300 Kolkata Contact Samir Roy 22/05/2023 26/05/2023 1 Techniical After completion the programme, the participants
and Automata teachers will be able to
from all  Apply the principles & techniques of Formal
disciplines Languages and Automata in computational
systems.
 Implement Formal languages and Automata in
software design.
 Explain the concepts of Formal Languages and
Automata in classroom
40. CU21A Fundamentals of 1500 Kolkata ICT Indrajit Saha 22/05/2023 26/05/2023 1 Faculty and After completion the programme, the participants
Image Processing Lab will be able to
Technician of  describe the fundamentals of image processing (IP)
Engineering in MATLAB
and  apply MATLAB commands to do IP
Polytechnic  explain image processing in classroom
Colleges from
CSE, IT, BCA,
MCA, ECE, EE,
ME, CIVIL
depts.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
41. CU22C Refresher Course on 300 Kolkata Hybrid Chandan Chakraborty 22/05/2023 26/05/2023 1 Faculty of CSE,  After completion of the programme, the
Machine Learning & IT, MCA participants will be able to
Deep Learning disciplines  Discuss overview of ML and DL with Engineering
applications,
 Demonstrate classification and clustering
techniques
 Explain DL architectures and Transfer Learning
 Discuss Examples
42. PS20F Advanced Pedagogy Free Kolkata ICT Habiba Hussain 22/05/2023 02/06/2023 2 Teachers from After completion the programme, the participants will
HEIs be able to
 Analyse the strategies from basic
 Explain the recent trend in curriculum design
 Characterise hybrid mode in teaching
 Practice a few active learning techniques
 Develop instruction with a blended learning
approach
 Use technology in learning assessment
43. PS21B Drinking Water 1400 Kolkata ICT Sailendra Nath Mandal 22/05/2023 02/06/2023 2 Faculty and After attending the programme the participants will
Quality and Public Staff of any be able to acquire –
Health discipline • knowledge of different drinking water testing
parameters, equipment, methods of testing ,
different standards and impact on human health,
•skill of online demonstration of different device,
performing experiments, interpreting results,
preparing test report, providing laboratory
instructions to develop inquiring attitude among
the student and evaluation of laboratory
performance in related to drinking water testing
laboratory,
• attitude of live online demonstration in the
laboratory/field.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
44. PS22B Journal Paper and 700 Kolkata ICT Subrata Chattopadhyay 22/05/2023 26/05/2023 1 Faculty of all After completion of the programme, the
Thesis writing disciplines participants will be able to
 Explain Features, Importance, Characteristics,
Concepts and Types Of Research Design
 Illustrate Case Study Research
 Develop expertice on Jounal paper writing
 Develop expertice on Thesis writing
45. PS23C Development of 300 Kolkata Contact Subrata Mondal 22/05/2023 26/05/2023 1 Faculty of all After completion of the programme, the participants
Laboratory disciplines and will be able to
Instruction and laboratory  explore the role of laboratory in student learning;
Manual technicians  explore development of laboratory exercise;
 explore writing of laboratory report;
 explore standard operating procedure (SoP) in
laboratory;
 explore safety management in laboratory etc.
46. CU23C Advance 300 Kolkata Contact Rajeev Chatterjee 29/05/2023 02/06/2023 1 Faculty of all After completion the programme, the participants
Programming in C disciplines will be able to
 Demonstrate the various operation on single and
multi –dimensional arrays and structures,
 Demonstrate programs related to functions and
pointers
 Demonstrate programming skills on dynamic
allocation of memory using linked list.
47. PS24C Holistic and 300 Kolkata ICT Urmila Kar 29/05/2023 02/06/2023 1 Faculty After completion of the programme, the participants
Multidisciplinary members and will be able to
Education technicians  Identify the need for and components of Holistic
from all and Multidisciplinary education
Higher  Explain the principles of Holistic and
Educational Multidisciplinary education.
Institutes  Identify the challenges in implementing Holistic
and Multidisciplinary education
Explore the strategies in implementing Holistic and
Multidisciplinary education in HEIs.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
48. CU24C Finite Element 300 Kolkata ICT Mithu Dey 05/06/2023 09/06/2023 1 Faculty of Civil After completion the programme, the participants will
Method using , Mechanical be able to
Software  Explain the use of FEM
 Solve the problem using FEM
 Discuss different features of FEM software
49. CU25C 8085 300 Kolkata Hybrid Soumitra Kumar 05/06/2023 09/06/2023 1 Faculty and After attending the programme, the participants will be
Microprocessor Mandal Lab able to
Technician of  Describe Architecture and programming of 8085
Engineering Microprocessor
and  Design interfacing circuits for Microprocessor
Polytechnic based systems
Colleges in EE,  Develop Microprocessor based projects
ECE, EEE and  Write assembly language programs
EIE  Illustrate applications of 8085 Microprocessor
50. CU26F Data Science in Free Kolkata ICT Nirmal Kumar Mandal 05/06/2023 09/06/2023 1 All Disciplines After completion of the programme, the participants
Engineering will be able to
 Explain Design of Experiment
 Perform statistical modelling of a engineering
systems
51. PS25C Induction Training 300 BBSR Contact Sagarika Pal 05/06/2023 09/06/2023 1 Faculty of all After completion the programme, the participants will
disciplines be able to
 Prepare the instructional objectives
 Formulate the lesson plan
 Differentiate between Assessment and Evaluation
 Design the table of Specification
 Prepare the question paper
 Evaluate skill in the laboratory

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
52. PS26C Digital Tools for 300 Kolkata ICT Arpan Kumar Mondal & 05/06/2023 09/06/2023 1 Technical After completion the programme, the participants will
Teachers and Staff Kinsuk Giri Teachers and be able to
Staff from all  Explain the need for online pedagogy
disciplines  Plan online instruction
 Explain the concept of online Mode of teaching-
learning,
 Understand the use of various ICT tools,
 Apply different online tools for ICT based teaching
learning
 Apply different online tools for online assessment
 Incorporate different principles for effective online
delivery
53. PS27B Creativity and 700 Kolkata ICT Dipankar Bose 05/06/2023 09/06/2023 1 Faculty After completion of the programme, the participants
Innovation memebers of will be able to
all disciplines  explain the concept of creativity
from different  explain the techniques of creative problem solving
technical  differentiate among creativity ,invention and
institutions innovation
 Decribe the concept and process of innovation
54. PS28C Student Friendly 300 Guw Contact Uday Chand Kumar 05/06/2023 09/06/2023 1 Faculty of all After completion of the programme, the participants
Methods of discipline will be able to
Instruction  Identify attributes of student friendly instruction.
 Plan student friendly activities
 Demonstrate student friendly instruction.
 Apply appropriate instructional strategy.
55. CU27B Control System 700 Kolkata ICT Prasanta Sarkar 12/06/2023 16/06/2023 1 Faculty of After completion the programme, the participants
analysis and Design Engineering will be able to
with MATLAB Disciplines  Model physical systems
 Analyze in time & frequency domain
 Determine input – output stability
 Design controller
 Apply MATLAB Control System Toolbox

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
56. CU28F Commentary IS:456- Free Kolkata ICT Santanu Bhanja 12/06/2023 16/06/2023 1 Faculty of After completion the programme, the participants
2000 with Expected Civil, will be able to
Modifications In the Architecture  Identify the steps to be taken for concrete
Forthcoming & allied production, quality control and testing
Revision disciplines  Interpret some of the important clauses of the
code in their true letter and spirit
 Implement the codal clauses in a better manner for
design and construction of Civil Engineering
Structures
 Explain the philosophy and principles of Limit State
Method in a comprehensive manner
 Conceive that this code cannot be considered as a
one package for the design of concrete structures
and has to be mandatorily read in conjunction with
other codes
 Identify the major design and detailing
considerations
 Discuss amendments of this standard
 Discuss limitations and probable modifications
57. CU29C Introduction to Data 300 Kolkata Contact Chandan Chakraborty & 12/06/2023 16/06/2023 1 Faculty of After completion of the programme, the participants
Analytics with SPSS Samir Roy Engineering & will be able to
& Excel Science  Deliver descriptive statistics for univariate,
disciplines bivariate and multivariate data analysis,
 Explore correlation and regression analysis (linear,
multiple and logistic)
 Address Curve fitting with Least Square method,
 Demonstrate Testing of Hypothesis for statistical
decision making,
 Explore data classification and clustering methods.
 Develop expertice on use of SPSS and Excel
software through hands-on-training,
 Draw Scientific interpretation as required for
publication, thesis writing and report generation.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
58. CU30A Introduction to 1500 Kolkata Contact Subrata Chattopadhyay 12/06/2023 16/06/2023 1 Faculty of After completion the programme, the participants
Optical Fibre & Its Electrical, will be able to
Application Electronics  Discuss optical fibre and it’s characteristics
and  Use of optical fibre as analog link
Communicatio  Apply optical fibre in voice communication
n,  Study signal transmission by optical fibre using
Mechanical, different modes of communication
Electronics &  Discuss merits and demerits of optical fibre
Instrumentati  Discuss utility of optical fibre in modern technology
on  Perform various experiments of communication
disciplines with optical fibre
59. CU31A Estimating & Costing 1500 Kolkata ICT Sheela Yadav Rai 12/06/2023 16/06/2023 1 All DisciplineAfter completion the programme, the participants will
of Non-conventional be able to
Energies  Describe various type of Non-conventional
Energies Sources
 Discuss the scope of Solar energy, Solar Thermal
Conversion, Solar Collector, Wind Energy
 Estimate costing of various energies
60. CU32B Introduction to Data 700 Kolkata ICT Indrajit Saha 12/06/2023 16/06/2023 1 Technical After completion the programme, the participants will
Science Teachers and be able to
Staff from  analyze the data using various statistical methods
CSE, IT, BCA, in MATLAB
MCA, ECE, EE,  visualize the data for better understanding
ME, CIVIL  develop prediction model for real-life data driven
depts.. problems in MATLAB
61. PS29A Content 1500 Kolkata ICT Arpan Kumar Mondal 12/06/2023 16/06/2023 1 Technical After completion the programme, the participants will
Development and &Kinsuk Giri teachers be able to
Assessment for e- from all  Explain the need for online pedagogy
Learning: MOOCs disciplines  Plan online instruction for MOOCs courses
Basics and Tools  Understand the use of various ICT tools for MOOCs,
 Apply different online tools for ICT based teaching
learning
 Apply different online tools for online assessment
for MOOCs

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
62. PS30C Research 300 Kolkata Contact Rayapati Subbarao 12/06/2023 16/06/2023 1 Faculty of all After completion of the programme, the participants
Methodology disciplines will be able to
 Identify different aspscets of research.
 Construe the results in a better way.
 Derive conclusions from the plots and contours
made.
 Discover the ways of writing a research paper.
 Communicate a paper in their area of research.
63. PS31C Induction Training 300 In-house Contact Subrata Mondal 12/06/2023 16/06/2023 1 Faculty of all After completion of the programme, the participants
disciplines will be able to
 explore duties and responsibilities of a faculty;
 explore instructional objectives and planning;
 introduce concept of active learning;
 explore various methods of teaching;
 explore classroom management;
 explore the importance of quality in education;
 explore aims of laboratory in technical education;
 explore question banking and assessment
methods;
 explore e-learning in teaching etc.
64. PS32B Soft skills 700 Kolkata ICT Habiba Hussain 12/06/2023 16/06/2023 1 Teachers from After completion of the programme, the participants
development HEIs will be able to
 Identify essential soft skills needed by teachers in
higher education
 Develop emotional intelligence
 Practice active listening
 Demonstrate social skills

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
65. CU33B Network 1400 Kolkata Contact Rajeev Chatterjee 12/06/2023 23/06/2023 2 Faculty of CSE, After completion the programme, the participants will
Infrastructure IT Computer be able to
Management Application,  Explain the concept of Computer Network and
Electronics, Internetwork,
discipline  Identify the various components of Network and
Internetwork,
 Explain the various protocols in TCP/IP Suite,
 Explain the concept of switching and routing,
 Explain LAN and VLAN,
 Demonstrate configuration of the devices such as
routers, switches, etc.,
 Develop exposure on Data Centre Management
 Explain the concept of network security
 Explain the Working Principle of Storage System

66. CU34C MATLAB & Simulink 300 Kolkata Hybrid Soumitra Kumar 19/06/2023 23/06/2023 1 Faculty and After completion the programme, the participants
Mandal Lab will be able to
Technician of  Discuss fundamentals of MATLAB
Engineering  Implement MATLAB Applications in Electrical
and Circuit, Control and Power System
Polytechnic  Explain the different aspect of MATLAB & Simulink
Colleges in EE,  Develop simple model using Simulink
ECE ,EEE and  Use MATLAB in analysis, design and simulation of
EIE Power Electronics
67. CU35B Non Traditional 700 Kolkata Contact Dipankar Bose 19/06/2023 23/06/2023 1 Faculty After completion the programme, the participants will
Machining Processes members with be able to
specialization  explain various types of non-traditional machining
ME, AE, processes
Production  Explain working principles of different non-
Engineering traditional machining processes
 Develop exposure on various non-traditional
machining processes through hands on practices

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
68. CU36B Wastwater 700 Kolkata ICT Sailendra Nath Mandal 19/06/2023 23/06/2023 1 Faculty and After attending the programme the participants will
Treatment – Recent Staff of any be able to acquire –
treands in discipline  knowledge of basic concept of different
regulatory norms parameter and treatment techniques of
and techlonogical wastewater water
advancement  skill of online demonstration of different device,
performing experiments, interpreting results,
preparing test report, providing laboratory
instructions to develop inquiring attitude among
the student and evaluation of laboratory
performance in related to drinking water testing
laboratory,
 attitude of live online demonstration in the
laboratory/field.
69. MGT03A Strategic 1500 Kolkata ICT Sukanta Kumar Naskar 19/06/2023 23/06/2023 1 Teachers and After completion the programme, the participants
managemnt issues managerial will be able to
in technical staff  Explain the concept of strategic management
institutions  Apply the concept of strategic planning
 Identify steps of strategic planning
 Apply different tools of management
70. PS33F Advanced Pedagogy Free Kolkata ICT Urmila Kar 19/06/2023 30/06/2023 2 Faculty After completion the programme, the participants
members and will be able to
technicians  Explore innovative approaches in curriculum
from all design and development for higher education
Higher  Evaluate contemporary pedagogical practices in
Educational Higher Education
Institutes  Promote Outcome Based Education
 Incorporate technology in teaching to enhance the
teaching learning process
 Identify innovative pedagogical practices in higher
education
 Engage students in complex problem solving and
critical thinking
 Develop teaching style to match learning styles of
students
 Design tools for assessing learning
 Plan teaching for Education 4.0
Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management
Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
71. CU37C Artificial Intelligence 300 Guw Contact Samir Roy 26/06/2023 30/06/2023 Faculty of CSE, After completion the programme, the participants
1 IT, MCA will be able to
disciplines  Apply the principles & techniques of Artificial
Intelligence in computational systems.
 Implement Artificial Intelligence systems.
Explain the concepts of Artificial Intelligence in
classroom
72. CU38A Fuzzy and Rough Set 1500 Kolkata Contact Samir Roy 03/07/2023 07/07/2023 1 Faculty of After successful completion the course the
Theory Engineering participant will be able to
Disciplines  Apply Fuzzy and Rough Set Theory in real-life
problems.
 Explain Fuzzy and Rough Set Theory in
classroom
 Design software using the concepts of Fuzzy
and Rough Set Theory

73. CU39A IoT application for 1500 Kolkata Hybrid Sagarika Pal 03/07/2023 07/07/2023 1 Faculty of After completion the programme, the participants will
sensor technology Electrical, be able to
Electronics  Differentiate sensors, transducers and actuators
and  Explain principle of operation of different sensors,
Communicatio transducers and actuators
n,  Explain need of IoT for sensor data communucation
Mechanical,  Apply various IoT techniques for sensors
Electronics &
Instrumentati
on
disciplines
74. CU40C Testing of Concrete 300 Kolkata Contact Mithu Dey 03/07/2023 07/07/2023 1 Faculty of Civil After completion of the programme, the participants
Material and allied will be able to
branch  Demonstrate the different test on bitumen
 Handle the instrunment.
 Explain the significance of test on bituminous
material
 Write the technical report

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
75. CU41C Hands on Practices 300 Kolkata Contact Arpan Kumar Mondal 03/07/2023 07/07/2023 1 Technical After completion of the programme, the participants
on TIG and MIG teachers and will be able to
Welding Stafffrom  Explain the principles of advanced welding
Mechanical processes.
Engineering or  Perform independently various advanced welding
allied processes: TIG, MIG, Welding
disciplines  Perform various testing of welds
76. CU42B Data Analytics 700 Kolkata ICT Chandan Chakraborty 03/07/2023 07/07/2023 1 Faculty of After completion of this course, the participants
Science and will be able to
Engineering  Deliver descriptive statistics for univariate,
bivariate and multivariate data analysis,
 Predictive modelling with data
 Curve fitting with Least Square method with
data
 Clustering and classification of data for
decision making
 Case studies
77. PS34B Curriculum Design 700 Kolkata In-house Urmila Kar 03/07/2023 07/07/2023 1 Faculty After completion the programme, the participants will
Under OBE members and be able to
technicians  Demonstrate curriculum development process
from all  Analyse content of technical curriculum
Higher  Identify the Features of Outcome Based Education
Educational System.
Institutes  Explain the components and Features of Outcome
Based Curriculum.
 Develop Curriculum Content under Outcome
Based Education

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
78. PS35C Drinking Water 300 Kolkata ICT Sailendra Nath Mandal 03/07/2023 07/07/23 1 Faculty and After attending the programme the participants will
Treatment Process Staff of any be able to acquire –
discipline  knowledge of basic concept of different parameter
and treatment techniques of Drinking water
 skill of online demonstration of different device,
performing experiments, interpreting results,
preparing test report, providing laboratory
instructions to develop inquiring attitude among
the student and evaluation of laboratory
performance in related to drinking water testing
laboratory,
 attitude of live online demonstration in the
laboratory/field.
79. PS36C Entrepreneurship 300 Guw Contact Subrata Mondal 03/07/2023 07/07/2023 1 Faculty of all After completion of the programme, the participants
Development disciplines will be able to
 explore concept of entrepreneurship;
 identify internal and external factors for
entrepreneurship;
 explore characteristics of an entrepreneur;
 explore entrepreneurial motivation and barrier;
 explore stages in entrepreneur process;
 explore research commercialization;
 explore technology business incubation Centre etc.
80. CU43C Introduction to 300 Kolkata ICT Rajeev Chatterjee 10/07/2023 14/07/2023 1 Faculty of CSE, After completion the programme, the participants
Software-Defined IT Computer will be able to
Networking (SDN) Application,  Explain the concept of SDN,
Electronics,  Demonstrate controller management in SDN,
discipline  Exhibit the SD based WAN & Mobile Networks, and
 Explain Security issues and Back-up Restoration in
SDN.
81. CU44B Fluid Power 700 Kolkata Contact Dipankar Bose 10/07/2023 14/07/2023 1 Faculty After completion the programme, the participants will
Technology members with be able to
specialization  explain classification of fluid powered systems
ME, AE,  demonstrate working principles of various types of
Production fluid powered systems through hands on practice
Engineering  illustrate applications of fluid powered systems

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
82. CU45B PLC and Industrial 700 Kolkata ICT Soumitra Kumar 10/07/2023 14/10/2023 1 Faculty and After completion the programme, the participants will
Automation Mandal Lab be able to
Technician of  Describe the architecture of PLC
Engineering  Develop PLC Programs
and  Apply PLC in Industrial Automation
Polytechnic  Explain SCADA
Colleges in
EE,ECE,EEE
and EIE
83. CU46C Mechanical 300 Kolkata Contact Arpan Kumar Mondal 10/07/2023 14/07/2023 1 Technical After completion of the programme, the participants
Workshop Practice teachers and will be able to
Stafffrom  Classify various components of mechanical
Mechanical workshop.
Engineering or Explain the principles of various metal working
allied processes.
disciplines  Practice on welding, forming, machine tools, CNC,
mechanical testing etc
84. PS37F Induction training Free Kolkata ICT Habiba Hussain 10/07/2023 21/07/2023 2 Teachers from After completion the programme, the participants
HEIs will be able to
 Identify the roles of a teacher
 Follow professional ethics
 Demonstrate teaching skills
 Plan instruction
 Differentiate the types of assessment
 Facilitate learning
85. PS38B Effective Teaching 700 Kolkata ICT Indrajit Saha 10/07/2023 14/07/2023 1 Teachers After completion the programme, the participants
and Research from all will be able to
disciplines  Demonstrate classroom teaching skills in different
modes
 Use digital tools in classroom teaching
 Conduct research for academic development

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
86. PS39C Community 300 Kolkata ICT Sheela Yadav Rai 10/07/2023 14/07/2023 1 Faculty from After completion of the programme, the participants
Development all Discipline will be able to
through Technical  Identify various Community Development Schemes
Institutes  Explain Feasibilty Report
 Prepare Reports
 Make linkages with organisations
87. CU47C Hands on Practices 300 Kolkata Contact Arpan Kumar Mondal 17/07/2023 21/07/2023 1 Technical After completion of the programme, the participants
on TIG, MIG, PAW teachers and will be able to
and MMW Staff  Explain the principles of advanced welding
from processes.
Mechanical  Perform independently various advanced welding
Engineering or processes: TIG, MIG, Pulsed TIG, Medium and Soft
allied Plasma Arc Welding
disciplines  Explain the physics of welding
 Perform various testing of welds
88. CU48C Green Machining of 300 Kolkata ICT Nirmal Kumar Mandal 17/07/2023 21/07/2023 1 Mechanical, After completion of the programme, the participants
Hard Materials Production, & will be able to
Industrial  Explain Hard Machining
 Develop programs on CNC Vertical machining
Centre.
 Operate machining Centre.
89. PS40C Curriculum design 300 Kolkata ICT Sukanta Kumar Naskar 17/07/2023 21/07/2023 1 Faculty and After completion the programme, the participants will
approaches Staff of any be able to
discipline  Analyze the components of a curriculum
 Understand the different approaches (Including
modern approaches in developing curricula
 develop sample curriculum

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
90. PS41B Environmental 700 Kolkata e-STTP Sailendra Nath Mandal 17/07/2023 21/07/2023 1 Faculty and After attending the programme the participants will
Pollution and Staff of any be able to develop
Climate Change discipline  knowledge of basic concept of Air pollution, Water
pollution, Noise pollution, Light pollution and
Climate change ,
 skill of online demonstration of different device,
performing experiments, interpreting results,
preparing test report, providing laboratory
instructions to develop inquiring attitude among
the student and evaluation of laboratory
performance in related to drinking water testing
laboratory,
 attitude of live online demonstration in the
laboratory/field.
91. PS42C NEP 2020 : Reforms 300 Kolkata e-STTP Urmila Kar 17/07/2023 21/07/2023 1 Faculty After completion of the programme, the participants
in HE members and will be able to
technicians  Explain the guiding principles of NEP 2020
from all  Explain new vision for India’s higher education
Higher system
Educational  Explain the major reforms identified in NEP 2020
Institutes  Identify the role of teachers of Higher Education
Institutes (HEIs) as revealed in NEP 2020.
92. PS43C SAR preparation for 300 Kolkata ICT Rayapati Subbarao 17/07/2023 21/07/2023 1 Faculty of all After completion of the programme, the participants
NBA disciplines will be able to
 Identify the Impact of NBA Accreditation.
 Prepare Vision, Mission, Program Educational
Objectives
 Prepare Outcomes and Program Outcomes
 Explain the procedure for preparing SAR.
 Establish correlations among the criteria i to x .

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
93. PS44C Development of 300 BBSR Contact Subrata Mondal 17/07/2023 21/07/2023 1 Faculty of allAfter completion of the programme, the participants
Laboratory disciplines and
will be able to
Instruction and laboratory  explore the role of laboratory in student learning;
Manual technicians  explore development of laboratory exercise;
 explore writing of laboratory report;
 explore standard operating procedure (SoP) in
laboratory;
 explore safety management in laboratory etc.
94. CU49C Utilization of 300 BBSR Contact Subrata Chattopadhyay 24/07/2023 28/07/2023 1 Faculty of After completion of the programme, the participants
Instructional Media Electrical, will be able to
and CAI in Effective Electronics •Explain the utility of instructional media
Teaching and •Discuss the types of instructional media and its
Communicatio advantages
n, •Demonstrate use of computer as instructional
Mechanical, media and its advantages and limitations
Electronics & •Explain need for the courseware
Instrumentati •Classify the Different types of courseware
on •Use Computer assisted instruction
disciplines •Discuss the feathers of CAI
•Explain different types of CAI
•Create a model class with CAI

95. CU50B PLC and Automation 700 Kolkata Hybrid Sagarika Pal 24/07/2023 28/07/2023 1 Faculty of After completion the programme, the participants
Electrical, will be able to
Electronics  Describe the architecture of PLC
and  Develop PLC Programs
Communicatio  Apply PLC in developing PID Controller
n,  Apply PLC for various automation systems
Mechanical,
Electronics &
Instrumentati
on
disciplines

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
96. CU51B Analysis,Design 700 Kolkata Contact Uday Chand Kumar & 24/07/2023 28/07/2023 1 Teachers of After completion the programme, the participants will
andEstimation Mithu Dey Civil, be able to
[Link] Architecture  Calculate the load from different structural
Building(ByLSM – and allied members
Mannualy andusing discipline  Analize the structures
software)  Design different structural elements
 Estimate the quantities of materials
97. CU52B 8086 700 Kolkata Hybrid Soumitra Kumar 24/07/2023 28/07/2023 1 Faculty and After completion the programme, the participants will
Microprocessor Mandal Lab be able to
Technician of  Describe Architecture and programming of 8086
Engineering Microprocessor
and  Design interfacing circuits for Microprocessor
Polytechnic based systems
Colleges in EE,  Develop Microprocessor based projects
ECe, EEE and  Write assembly language programs
EIE  Demonstrate applications of 8086 Microprocessor
98. CU53B Fundamentals of 700 Kolkata ICT Indrajit Saha 24/07/2023 28/07/2023 1 Teachers After completion the programme, the participants will
Data Security ofCSE, IT, BCA, be able to
MCA, ECE, EE,  describe the fundamentals of Data Security
ME, CIVIL  demonstrate how to maintain the privacy of
Depts. computer data
 explain network security in classroom
99. CU54B Mechanical Testing 700 Kolkata Contact Arpan Kumar Mondal 24/07/2023 28/07/2023 1 Technical After completion the programme, the participants will
of Materials teachers and be able to
Staff  Classify various mechanical characterization
from methods.
Mechanical  Explain the principles of various testing processes.
Engineering or  Practice on various testing methods viz. tensile
allied testing, impact testing, hardness testing,
disciplines metallurgical characterization, tribological
characterization, etc.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
100. CU55F Biomedical Free Kolkata Hybrid Chandan Chakraborty 24/07/2023 28/07/2023 1 Faculty of CSE, After completion of the programme, the participants
Engineering IT, ECE, MCA, will be able to
BCA, ME, BME  Discuss recent trends in biomedical engineering
and Medical  Relate AI/ML with biomedical engineering
colleges  Discuss Statistics in biomedical engineering
 Illustrate technologies in biomedical imaging
applications
 Discuss case studies for computer aided disease
diagnosis
101. PS45F Waste Water Free Kolkata Contact Subrata Mondal 24/07/2023 28/07/2023 1 Faculty of After completion the programme, the participants
Treatment: Pollution Chemical will be able to
Control and Reuse Engg.  explain the characterizations of wastewater;
Environmental  explore the characteristics of various industrials
Engg., wastewater;
Science,  describe the wastewater treatment using low cost
Textiles Engg., adsorbents and nano sized adsorbents;
and allied  describe the wastewater treatment using
disciplines membrane technology etc.
102. CU56F Air, Water Pollution Free Guw Contact Sailendra Nath Mandal 31/07/2023 04/08/2023 1 Faculty and After attending the programme the participants will
and Health Staff of any be able to develop
discipline  knowledge of basic concept of Air pollution, Water
pollution and impact on human health,
 skill of handling conventional and modern
sophisticated equipment, preparation of
laboratory instruction sheets, interpreting
experimental results, providing laboratory
instruction such as to develop in enquiring attitude
among students, preparing related test reports,
 attitude of hands-on-working in the
laboratory/field. (Plant Visit)

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
103. CU57C Introduction to Soft 300 BBSR Contact Samir Roy 31/07/2024 04/08/2024 1 Faculty of After successful completion the course the
Computing Engineering participant will be able to
Disciplines  Apply Soft Computing techniques in solving
real-life problems.
 Explain the concepts of Soft Computing in
classroom
 Design software using the concepts Soft
Computing

104. CU58C Hands on Practices 300 Kolkata Contact Arpan Kumar Mondal 31/07/2023 04/08/2023 1 Technical After completion of the programme, the participants
on Plasma, Pulsed teachers and will be able to
TIG and Friction Stir Staff  Explain the principles of advanced welding
Welding Process from processes.
Mechanical  Perform independently various advanced welding
Engineering or processes: FSW, Pulsed TIG, Medium and Soft
allied Plasma Arc Welding
disciplines  Perform the various advanced welding processes
 Perform various testing of welds
105. CU59B PYTHON 700 Kolkata Contact Kinsuk Giri 07/08/2023 11/8/2023 1 Faculty and On successful completion of the programme the
Programming instructors participants will be able to
from any  understand and explain the different aspects of
discipline PYTHON
 apply PYTHON to solve problems
 use PYTHON for visualizations

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
106. CU60F Polymer Composites Free Kolkata ICT Subrata Mondal 07/08/2023 11/08/2023 1 Faculty of After completion the programme, the participants
and Chemical will be able to
Nanocomposites Engg.  explain the fundamental concept of
Mechanical nanotechnology;
Engg.,  differentiate the microfillers and nanofillers;
Science,  explore the fundamental of polymeric composites
Textiles Engg., and nanocomposites;
Materials Sci.  describe the properties of polymeric composites
& Engg., and nanocomposites;
Polymer Engg.  explain the applications of polymeric composites
and allied and nanocomposites etc.
disciplines
107. CU61A Network 1500 Kolkata ICT Rajeev Chatterjee & 07/08/2023 11/08/2023 1 Faculty of CSE, After completion the programme, the participants
Infrastructure and Ranjan Dasgupta IT Computer will be able to
Cloud Security Application,  Explain the concept of Computer Network and
Electronics, Internetwork
discipline  Illustrate Principles of Security
 Describe ISO27001: 2013
 Demonstrate Network infrastructure elements
 Explain Security Issues of Structure Cloud
 Explain the concept of network security
 Enlighten Application level security
108. CU62B Power Generation 700 Kolkata ICT Sheela Yadav Rai 07/08/2023 11/08/2023 1 Faculty from After completion of the programme, the participants
from Energy all Discipline will be able to
Resources  Identify the potential sources of conventional
energies for power generation
 Describe potential sources of non-conventional
energies for power generation
 Discuss environmental aspects of power
generation
 Appreciate about various power projects

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
109. PS46C Student mentorship 300 Kolkata ICT Habiba Hussain 07/08/2023 11/08/2023 1 Teachers from After completion of the programme, the participants
for holistic HEIs will be able to
development  Identify the roles of coach & mentor
 Explain mentorship styles
 Characterise holistic development
 Encourage growth mindset
110. PS47C Innovation and 300 Kolkata Contact Prasanta Sarkar 07/08/2023 11/08/2023 1 Faculty of After attending the programme, the participants will
Startup in Higher Engineering be able to
Education Disciplines • Create awareness on Entrepreneurship
Institutions development among students and faculty
• Promote entrepreneurship
• Provide support service fo incubation and
startup
111. PS13B Effective classroom 700 Kolkata ICT Habiba Hussain 14/08/2023 18/08/2023 1 Teachers from After completion the programme, the participants will
communication HEIs be able to
 Categorise the patterns in classroom
communication
 Listen actively
 Promote discussion among learners
Provide meaningful feedback
112. PS48B Language and 420 Kolkata Contact Samir Roy 16/08/2023 18/08/2023 3 Faculty of all After successful completion of this course the
Presentation of days disciplines participants will be able to
Research Papers  Write research papers with appropriate language
 Develop presentations for research papers.
 Deliver presentations on research paper.
113. CU63A Engineering 1500 Kolkata ICT Prasanta Sarkar 21/08/2023 25/08/2023 1 Faculty and After completion the programme, the participants
Capstone Project Technical Staff will be able to
of all  Form Capstone Project Team
Disciplines  Identify Capstone Project topic
 Prepare Capstone Project proposal
 Develop Capstone Project
 Assess Capstone Project

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
114. CU64F Introduction to Free BBSR Contact Indrajit Saha 21/08/2023 25/08/2023 1 After completion the programme, the participants
Machine Learning Teachersfrom will be able to
all  describe the fundamentals of Machine Learning
disciplinesCSE, (ML)
IT, BCA, MCA  apply ML for clustering, classification and
ECE, EE, ME, regression
CIVIL  explain machine learning in classroom
115. CU65B Applications of 700 Kolkata Hybrid Sagarika Pal 21/08/2023 25/08/2023 1 Faculty of After completion the programme, the participants will
MATLAB Electrical, be able to
Electronics  Use MATLAB commands
and  Apply Control System Tool Box Commands
Communicatio  Illustrate Simulink Modelling techniques
n,  Apply Image processing Tool Box Commands
Mechanical,  Apply Fuzzy Logic Tool Box
Electronics &  Create GUI using GUIDE
Instrumentati
on
disciplines
116. CU66B LABVIEW and its 700 Kolkata Hybrid Soumitra Kumar 21/08/2023 25/08/2023 1 Faculty and After completion the programme, the participants will
Applications Mandal Lab be able to
Technician of  Discuss fundamentals of LABVIEW
Engineering  Implement LABVIEW Applications in Control
and Engineering
Polytechnic
Colleges in EE,
ECE, EEE and
EIE

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
117. CU67C Utilization of 300 Guw Contact Subrata Chattopadhyay 21/08/2023 25/08/2023 1 Faculty of After completion of the programme, the participants
Instructional Media Electrical, will be able to
and CAI in Effective Electronics  Explain the utility of instructional media
Teaching and  Discuss the types of instructional media and its
Communicatio advantages
n,  Demonstrate use of computer as instructional
Mechanical, media and its advantages and limitations
Electronics &  Explain need for the courseware
Instrumentati  Classify the Different types of courseware
on  Use Computer assisted instruction
disciplines  Discuss the feathers of CAI
 Explain different types of CAI
 Create a model class with CAI
118. CU68C Machine Learning & 300 Kolkata Contact Chandan Chakraborty 21/08/2023 25/08/2023 1 Faculty of After completion of the programme, the participants
Statistical Engineering will be able to
Computing using R disciplines  Discuss overview of ML
Programming  Demonstrate classification and clustering
techniques
 Explain various statistical models for predictive
analytics
 Illustrate Data fitting with regression models.
 Discuss basics of R programming and its Hands-on-
Training for few case studies
119. CU69C Concrete Mix 300 Kolkata Hybrid Santanu Bhanja 21/08/2023 25/08/2023 1 Faculty of After completion of the programme, the participants
Proportioning as per Civil, will be able to
IS 10262 - 2019 Architecture  Discuss the process of selection of good ingredients
& allied of concrete
disciplines  Identify the important properties of concrete
 Explain the process of concrete mix design as per
the latest code of practice
 Discuss mix design of different types of concrete
 Identify different types of admixtures and their use
120. MGT04B Managerial skills for 700 Kolkata ICT Sukanta Kumar Naskar 21/08/2023 25/08/2023 1 Faculty and After completion the programme, the participants will
technical teachers Staff of any be able to
discipline  Demonstrate the managerial skill effectively
 Identify managerial skills of a teacher

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
121. PS49B Testing of Drinking 700 Kolkata Contact Sailendra Nath Mandal 21/08/2023 25/08/2023 1 Faculty and After attending the programme the participants will
Water and Health Staff of any be able to acquire –
discipline  knowledge of different drinking water testing
parameters, equipment, methods of testing ,
different standards and impact on human health,
 skill of handling conventional and modern
sophisticated equipment, preparation of
laboratory instruction sheets, interpreting
experimental results, providing laboratory
instruction such as to develop in enquiring attitude
among students, preparing related test reports,
related to engineering chemistry,
 attitude of hands-on-working in the
laboratory/field. (Plant Visit)
122. PS50C NBA Accreditation 300 Kolkata ICT Arpan Kumar Mondal 21/08/2023 25/08/2023 1 Technical After completion the programme, the participants will
and SAR Preparation &Ranjan Dasgupta teachers be able to
for Engineering from all  Identify the Impact of NBA Accreditation
Colleges disciplines  Prepare Vision, Mission, PEO and PSO
 Prepare CO-PO mapping
 Learn how to prepare pre-qualifier and SAR.
 Practice Criteria 1 to 10
 Understand the washington accord
 Understand the esence of CEP and LLL
123. PS51C Accreditation for 300 Kolkata ICT Rayapati Subbarao 21/08/2023 25/08/2023 1 Faculty of all After completion of the programme, the participants
Engineering colleges engineering will be able to
and Polytechnics disciplines  Identify the basics of Accreditation.
 Prepare Vision, Mission, Program Educational
Objectives
 Prepare Outcomes and Program Outcomes.
 Learn how to prepare SAR.
 Practice Criteria i to x.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
124. CU70B Analysis and Design 1400 Kolkata ICT Mithu Dey 28/08/2023 01/09/2023 1 Faculty of Civil After completion the programme, the participants will
of Structures using and allied be able to
SAP 2000 branch  Describe different methods of analysis using
software
 use of relevant codes for design and detailing of RC
structures
Explain different features of SAP 2000
125. CU71C Mobile and Wireless 300 Kolkata Contact Rajeev Chatterjee 28/08/2023 01/09/2023 1 Faculty of CSE, After completion the programme, the participants
Network IT Computer will be able to
Application,  Explain the basic concept of mobile and wireless
Electronics, network
discipline  Design of Enterprise Wireless LAN
 Explain Mobile IP Network
 Explain IdAM system
126. CU72C Nonconventional 300 Kolkata Contact Subrata Chattopadhyay 04/09/2023 08/09/2023 1 Faculty of After completion of the programme, the participants
Energy Electrical, will be able to
Electronics  Identify different types of non conventional energy
and sources and their applications.
Communicatio  Discuss solar energy, Utilization of it, Principles
n, involved in solar energy.
Mechanical,  Explore the concepts involved in wind energy
Electronics &  Illustrate Tidal and wave energy and the
Instrumentati operational
on  Illustrate Geothermal energy.
disciplines
127. CU73C Word Processing 300 BBSR Contact Kinsuk Giri 04/09/2023 08/09/2023 1 Faculty of all On successful completion of the programme the
with LaTeX engineering participants will be able to
disciplines •develop exposure in Word Processing Tools
•describe the fundamentals LaTeX programming
• apply LaTeX for preparing scientific and non-
scientific documents

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
128. CU74C Design & Analysis of 300 Kolkata Contact Samir Roy & Ranjan 11/09/2023 15/09/2023 1 Faculty of CSE, After successful completion of the program, the
Algorithm Dasgupta IT Computer participants will be able to
Application,  Design an Algorithm
and related
 Analyse an algorithm
disciplines
Explain the concepts of Design & Analysis of
Algorithms
129. CU75B LABVIEW 700 Kolkata Hybrid Sagarika Pal 11/09/2023 15/09/2023 1 Faculty of After completion the programme, the participants
Programming and Electrical, will be able to
Applications Electronics  Explain features of LABVIEW
and  Create VI files
Communicatio  Apply VI files in various fields
n,  Apply Data Acquisition System in LABVIEW
Mechanical,
Electronics &
Instrumentati
on
disciplines
130. CU76B Laboratory Practice 700 Kolkata Contact Sailendra Nath Mandal 11/09/2023 15/09/2023 1 Faculty and After attending the programme the participants will
in Wastewater Staff of any be able to acquire –
discipline  knowledge of basic concept of different parameter
of wastewater, sampling, preservation, analysis,
standards, interpretation of result and impact on
human health ,
 skill of handling equipment, performing
experiments, interpreting results, preparing test
report, providing laboratory instructions to
develop inquiring attitude among the student and
evaluation of laboratory performance in related to
solid waste, wastewater analysis/ treatment
laboratory,
 attitude of hand-on working in the laboratory/field
(Plant Visit)

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
131. CU77B Advanced Materials 700 Kolkata Contact Subrata Mondal 11/09/2023 15/09/2023 1 Faculty of After completion the programme, the participants will
Science and Chemical be able to
Engineering Engg.  explain the structure sensitive properties of
Mechanical polymers, metals and alloys;
Engg.,  explain the fundamental of nanomaterials, types of
Science, nanomaterials, principle methods of
Textiles Engg., nanomaterials preparation, properties and
Materials Sci. applications;
& Engg.,  explain types, manufacturing process, properties
Polymer Engg. and applications of metal matrix, ceramic matrix
and allied and polymer matrix composites/nanocomposites;
disciplines  explain biocompatible and biodegradable
materials, characteristics and applications for
various biomaterials etc.
132. CU78B Power Generation 700 BBSR Contact Sheela Yadav Rai 11/09/2023 15/09/2023 1 Faculty from After completion of the programme, the participants
from Energy all Discipline will be able to
Resources  Identify the potential sources of conventional
energies for power generation
 Describe potential sources of non-conventional
energies for power generation
 Discuss environmental aspects of power
generation
 Appreciate about various power projects

133. CU79C Refresher Course on 300 Kolkata ICT Dipankar Bose 11/09/2023 15/09/2023 1 Faculty After completion of the programme, the participants
Fluid Mechanics members with will be able to
specialization  Identify classification and properties of fluid
ME,CE, AE,  state principles of hydrostatics and buoyancy
Production  explain the principle of dynamics of flow
Engineering  Explain the concept of flow through pipes and open
channel flow

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
134. CU80C Computational 300 Kolkata Contact Rayapati Subbarao 11/09/2023 15/09/2023 1 Faculty of After completion of the programme, the participants
techiques for mechanical will be able to
mechanical engineering  Identify the purpose of Computational Techniques
engineers disciplines  Understand and write applicable programs in C.
 Appreciate tools like MS Excel and Origin.
 Gain exposure to various software packages to
solve problems in Mechanical Engineering.
135. CU81C Building 300 Guw Contact Uday Chand Kumar 11/09/2023 15/09/2023 1 Teachers and After completion of the programme, the participants
Construction, Repair Staffs from all will be able to
and Maintenance disciplines  Describe the steps for construction of Masonry and
R.C.C. building.
 Describe the importance of centering, shuttering,
scaffolding as required.
 State the reasons for maintenance of building
136. CU82C Embedded System 300 Kolkata ICT Soumitra Kumar 11/09/2023 15/09/2023 1 Faculty and After completion of the programme, the participants
and 8051 Mandal Lab will be able to
Microcontroller Technician of  Describe Architecture and programming of 8051
Engineering Microcontroller
and  Design interfacing circuits for Microcontroller
Polytechnic based systems
Colleges in EE,  Develop Microcontroller based projects
ECE, EEE and  Write assembly language programs
EIE  Describe Embedded System and it’s applications
137. PS52B Effective training 700 Kolkata ICT Sukanta Kumar Naskar 11/09/2023 15/09/2023 1 Teachers and After completion the programme, the participants will
support staff be able to
 Identify the stages for conducting a training
programme
 Design a training programme
 Apply different techniques for conducting a
training programme
 Evaluate effectively outcome of a training
programme

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
138. CU83F Engineering Free BBSR Contact Prasanta Sarkar 18/09/2023 22/09/2023 1 Faculty and After completion the programme, the participants
Capstone Project Technical Staff will be able to
of all  Form Capstone Project Team
Disciplines  Identify Capstone Project topic
 Prepare Capstone Project proposal
 Develop Capstone Project
Assess Capstone Project
139. CU84B Statistical Methods 700 Kolkata e-STTP Chandan Chakraborty 18/09/2023 22/09/2023 1 Faculty of all After completion the programme, the participants will
in Data Analysis disciplines be able to
 Discuss overview on data summarization and
visualization
 Explain concept of probability and its various
distributions
 Explain correlation and linear/non-linear
regression analysis
 Test hypothesis for research data analysis
 Demonstrate statistical software using SPSS,
Python.
140. CU85C Modelling with 300 Kolkata Contact Nirmal Kumar Mandal 18/09/2023 22/09/2023 1 Faculty from After completion of the programme, the participants
AUTOCAD and all Disciplines will be able to
SOLIWORKS  Use various drafting and editing tools
 Model 3D parts using AUTOCAD and SOLIWORKS

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
141. PS53F Induction Training Free Kolkata Hybrid Urmila Kar 18/09/2023 29/09/2023 2 Faculty After completion the programme, the participants
members and will be able to
technicians  explain the quality issues in Technical Education
from all and Role of Teachers
Higher  illustrate the process involved in Curriculum
Educational Development, Implementation and Reforms
Institutes  decide learning outcomes of specific course
 identify teaching strategy, methods and skills
 plan instruction
 assess performance of learners
 Identify quality parameters in institutional
development
 Illustrate the process of accreditation for technical
institutes
 Explain professional values and ethics of teachers
 Promote Technology Enable Learning (TEL)
 Identify Learning Style of students
 Identify style of teaching
 Explain the need for active learning for 21st
century learners
 Plan instruction for active learning
 Decide assessment tools for active learning
142. CU86C Object Oriented 300 Kolkata Contact Rajeev Chatterjee & 25/09/2023 29/09/2023 1 Faculty of CSE, After completion the programme, the participants
Design & Samir Roy IT Computer will be able to
Programming in C++ Application,  Create an Object-Oriented Model of a software,
Electronics,  Use of UML for Software Design
Electrical,  Write a Program in C++ to solve a computational
Mathematics problem
disciplines  Compile, debug and execute a program in C++
 Apply objects, classes, inheritance, polymorphism
etc. to implement object-oriented programming.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
143. CU87A Fundamentals of 1500 Kolkata ICT Indrajit Saha 25/09/2023 29/09/2023 1 Faculty After completion the programme, the participants
Machine Learning members will be able to
and Deep Learning from CSE, IT,  describe the fundamentals of Machine Learning
BCA, MCA (ML) and Deep Learning
ECE, EE, ME,  apply ML for clustering, classification and
CIVIL regression
 explain machine learning in classroom
144. CU88A Shear Wall Design 1500 Kolkata Contact Santanu Bhanja 25/09/2023 29/09/2023 1 Faculty of After completion the programme, the participants will
Using Interaction Civil, be able to
Charts Highlighting Architecture  Explain the fundamental principles of RC design as
the Shortcomings of & allied per Indian Standards - the fundamentals of Limit
!S 13920-2016 disciplines, State Method and need for ductility design
Students,  RC Shear Walls – Failure modes and Analysis
Industry  Design as per IS 13920-2016
people,  Develop Interaction Charts for Shear Walls
Working  Apply a standard software for analysis and design
Engineers
145. PS54F Induction training Free Kolkata ICT Sukanta Kumar Naskar 25/09/2023 29/09/2023 1 Faculty from After completion of the programme, the participants
all disciplines will be able to
 Develop concept of curriculum development
 Manage the classroom effectively
 Identify instructional objectives
 Develop lesson plan
 Identify quality parameters of Technical Education
 Identify managerial roles of a teacher
146. PS55F Ethics, Values and Free Kolkata Contact Uday Chand Kumar 04/10/2023 06/10/2023 3- Teachers and After completion the programme, the participants
Morality days Staffs from all will be able to
disciplines  Differentiate between ethics, values and morality.
 Create an awareness among the human being
147. CU89B Intelligent Search 420 Kolkata Contact Samir Roy 09/10/2023 11/10/2023 3- Faculty of CSE After successful completion of this course the
Techniques days / IT / MCA participants will be able to
disciplines  Explain the various search techniques of AI
 Develop software to carry out intelligent search
 Apply intelligent search as a problem solving
strategy.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
148. CU90A Introduction to 1500 Kolkata ICT Indrajit Saha 09/10/2023 13/10/2023 1 Teachersfrom After completion the programme, the participants
Image Processing all will be able to
disciplinesCSE,  describe the fundamentals of image processing (IP)
IT, BCA, MCA in MATLAB
ECE, EE, ME,  apply MATLAB commands to do IP
CIVIL  explain image processing in classroom
149. CU91C Laboratory Practice 300 Kolkata Contact Sailendra Nath Mandal 09/10/2023 13/10/2023 1 Faculty and After attending the programme the participants will
in Engineering Staff of be able to gain and develop–
Chemistry Chemistry  knowledge of ‘modern principles of laboratory
discipline experimentation’ in engineering chemistry,
 skill of handling conventional and modern
sophisticated equipment, preparation of
laboratory instruction sheets, interpreting
experimental results, providing laboratory
instruction such as to develop in enquiring attitude
among students, preparing related test reports,
related to engineering chemistry,
 attitude of hands-on-working in the
laboratory/field. (Plant Visit)
150. CU92B Modelling, Analysis 700 Kolkata ICT Santanu Bhanja 09/10/2023 13/10/2023 1 Faculty of After completion of the programme, the participants
and Design of Civil, will be able to
Buildings with a Architecture  Be acquainted with the basic methodology of
Versatile Structural & allied software application in structural analysis and
Engineering disciplines design of RC buildings
Software  Apply latest IS codal provisions in analysis, design
and detailing like IS 456, 1893, 875, 13920 etc.
 Know the basic features of a universally accepted
standard software-ETABS
 Analyse, Design and Detail real life multi-storeyed
buildings
151. PS56C Implementing 300 Kolkata ICT Dipankar Bose 09/10/2023 13/10/2023 1 Faculty After completion of the programme, the participants
experiential memebers of will be able to
learning# all disciplines  Explain the concept of Experiential Learning
from different  Discuss Kolb’s Learning Cycle
technical  explain Techniques for Experiential Learning
institutions  conduct Experiential Learning Activities

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
152. CU93C Machine Learning 300 Kolkata ICT Nirmal Kumar Mandal 09/10/2023 13/10/2023 1 Faculty from After completion of the programme, the participants
with MATLAB all Disciplines will be able to
 Explain machine learning
 Use MALAB in modelling
 Classify data
153. CU94F R Programming Free Kolkata ICT Kinsuk Giri 09/10/2023 13/10/2023 1 All Faculty On successful completion of the programme the
from all participants will be able to
Disciplines  Explain the different aspects of R
 Apply R to solve basic problems
 Use R for visualizations

154. MGT05C Leadership & People 300 Kolkata ICT Habiba Hussain 09/10/2023 13/10/2023 1 Teachers from After completion of the programme, the participants
Management HEIs will be able to
 Characterise academic leadership
 Build learning teams
 Identify different leadership styles
 Manage people through improved skills
155. PS57C Induction Training 300 Kolkata ICT Sheela Yadav Rai 09/10/2023 13/10/2023 1 Faculty from After completion of the programme, the participants
all Discipline will be able to
 Formulate the lesson plan
 Prepare the instructional objectives
 Identify the principles of evaluation
 Distinguish between types of evaluation
156. PS58F Professional Values Free Guw Contact Mithu Dey 16/10/2023 20/10/2023 1 All Faculty and After completion the programme, the participants
and Ethics Staff will be able to
 Discuss the moral values that ought to guide the
engineering profession
 create an awareness on professional Ethics and
Human Values.
 Resolve the moral issues in the profession
 develop a set of beliefs, attitudes, and habits that
professional should display regarding morality

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
157. PS59C Outcome Based 300 Kolkata ICT Urmila Kar 16/10/2023 20/10/2023 1 Faculty After completion of the programme, the participants
Accreditation and members and will be able to
NBA technicians  explain the need for and features of Outcome
from all Based Education (OBE)
Higher  justify the requirement of Outcome Based
Educational Accreditation (OBA)
Institutes  identify parameters for OBA
 explain the features of Outcome Based Curriculum
(OBC)
 identify outcome based learning-teaching and
assessment processes
 explain the process of preparing self-assessment
report (SAR) for Accreditation by NBA
158. PS60B Developing life skills 420 Kolkata ICT Sukanta Kumar Naskar 18/10/2023 20/10/2023 3- Teachers and After completion the programme, the participants will
days support staff be able to
 Identify essentials life skills
 apply them effectively
159. CU95C Innovation and 300 In-house Contact Prasanta Sarkar 30/10/2023 03/11/2023 1 Faculty of After completion the programme, the participants
Startup in higher Engineering will be able to
Education Disciplines  Create awareness on Entrepreneurship
Institutions development among students and faculty
 Promote entrepreneurship
 Provide support service for incubation and start-up
160. PS61C NBA Accreditation 300 BBSR Contact Rayapati Subbarao 30/10/2023 03/11/2023 1 Faculty of all After completion of the programme, the participants
and SAR preparation disciplines will be able to
 Identify the Impact of NBA Accreditation.
 Prepare Vision, Mission, Program Educational
Objectives
 Prepare Outcomes and Program Outcomes
 Explain the procedure for preparing SAR.
 Establish correlations among the criteria i to x .

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
161. CU96C RC Design – Limit 300 Kolkata ICT Santanu Bhanja 06/11/2023 10/11/2023 1 Faculty of After completion of the programme, the participants
State Method and Civil, will be able to
Beyond Architecture  Be acquainted with the fundamentals of Limit State
& allied Method of Design as per Indian Standards IS 456-
disciplines 2000 and IS 13920-2016 highlighting the design
philosophy of prescriptive method of design
 Be introduced to Performance based seismic
design
 Be acquainted with the shortcomings of the
standards in dealing with high grades of concrete
and identify the grades of steel that are suitable for
seismic design
 Be introduced to overall design philosophy rather
than mechanically using some design aids or charts
 Analyze, Design and Detail foundations for real life
multistoried buildings using the basic features of
different software
162. CU97C Mathematical Logic 300 In-house Contact Samir Roy 06/11/2023 10/11/2023 1 Faculty of all After successful completion of this course the
disciplines participant will be able to
 Explain the concepts of Mathematical Logic
 Apply Mathematical Logic in problem
solving

163. CU98A MATLAB & Fuzzy 1500 Kolkata Hybrid Soumitra Kumar 06/11/2023 10/11/2023 1 Faculty and After completion the programme, the participants
Logic Control Mandal Lab will be able to
Technician of  Understand fundamentals of MATLAB
Engineering  Implement MATLAB Applications in Control
and System
Polytechnic  Explain the different aspect of Fuzzy Logic Control
Colleges in EE,  Develop simple model using Fuzzy tool box
ECE ,EEE and
EIE

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
164. CU99B Renewable Energy 700 In-house Contact Sheela Yadav Rai 06/11/2023 10/11/2023 1 All Discipline After completion the programme, the participants will
Sources and be able to
Emerging  Identify Energy Sources and their utilization
Technologies  Explain Environmental aspects of electric energies
generation
 Explain the scope of Solar Thermal Conversion and
Solar Photovoltaic system
 Describe about wind energy, Geothermal energy
and Biomass
 Apply Non-conventional energies through various
agencies [Link]
165. CU100B Fusion Welding 700 Kolkata Contact Dipankar Bose 06/11/2023 10/11/2023 1 Faculty After completion of the programme, the participants
Processes members and will be able to
Technical Staff  explain various types of fusion welding processes
Members of  understand working principles of different fusion
Technical welding processes
Institutions  state characteristics of various fusion welding
with, ME, processes
Production  Hands on practices on various fusion welding
and processes
Automobile
Engineering
166. CU101B Problem Solving 700 In-house ICT Kinsuk Giri 06/11/2023 10/11/2023 1 Any Sciene On successful completion of the programme the
with PYTHON and participants will be able to
Engineering  learn the grammars of PYTHON language
Streams  apply PYTHON to solve problems
 use PYTHON for ML and Data Analysis
167. PS62C Induction Training 300 Guw Contact Sagarika Pal 06/11/2023 10/11/2023 1 Faculty of all After completion the programme, the participants will
disciplines be able to
 Prepare the instructional objectives
 Formulate the lesson plan
 Differentiate between Assessment and Evaluation
 Design the table of Specification
 Prepare the question paper
 Evaluate skill in the laboratory

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
168. CU102C MATLAB & Simulink 300 Guw Contact Soumitra Kumar 13/11/2023 17/11/2023 1 Faculty and After completion the programme, the participants
Mandal Lab will be able to
Technician of  Discuss fundamentals of MATLAB
Engineering  Implement MATLAB Applications in Electrical
and Circuit, Control and Power System
Polytechnic  Explain the different aspect of MATLAB & Simulink
Colleges in EE,  Develop simple model using Simulink
ECE,EEEand  Use MATLAB in analysis, design and simulation of
EIE Power Electronics
169. CU103F Air, Water Pollution Free BBSR Contact Sailendra Nath Mandal 13/11/2023 17/11/2023 1 Faculty and After attending the programme the participants will
and Health Staff of any be able to gain and develop
discipline  knowledge of basic concept of Air pollution, Water
pollution and impact on human health,
 skill of handling conventional and modern
sophisticated equipment, preparation of
laboratory instruction sheets, interpreting
experimental results, providing laboratory
instruction such as to develop in enquiring attitude
among students, preparing related test reports,
 attitude of hands-on-working in the
laboratory/field. (Plant Visit)
170. CU104C AutoCAD for 300 Kolkata Contact Mithu Dey 13/11/2023 17/11/2023 1 Faculty of Civil After completion of the programme, the participants
Engineers , mechanical, will be able to
electrical  use different commands of the Software
 Draw the 2D and 3D
 Demonstrate the use of AutoCAD in Engg.
171. PS63B Academic 700 Kolkata ICT Urmila Kar 13/11/2023 17/12/2023 1 Faculty After completion of the programme, the participants
Leadership members will be able to
from all  Identify the role of a teacher-leader
Higher  Identify the key competencies needed for an
Educational academic leader.
Institutes  Assess quality of academic leadership for
improvement
 Develop personal action plan

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
172. CU105B Introduction to 700 Kolkata ICT Indrajit Saha 20/11/2023 24/11/2023 1 Faculty of CSE, After completion of the programme, the participants
Computational IT, BCA, MCA will be able to
Intelligence ECE, EE, ME,  describe the fundamentals of Computational
CIVIL Depts. Intelligence (CI)
 apply CI for complex computational problem
 explain computational intelligence in classroom
173. PS64B Choice Based Credit 700 BBSR Contact Chandan Chakraborty 20/11/2023 24/11/2023 1 All Faculty After completion the programme, the participants
System & its from HEIs will be able to
Implementation  Explain the importance and structure of Choice
Based Credit System (CBCS) in Technical Education.
 Explore the meaning of Core, Discipline Specific
Elective, Skill and Ability Enhancement Core
Courses.
 Develop an understanding of evaluation methods
including rubrics
174. CU106C Modelling of 300 Guw Contact Nirmal Kumar Mandal 20/11/2023 24/11/2023 1 All Disciplines After completion of the programme, the participants
Physical Systems will be able to
 Model a system.
 Analyse the physical system
175. MGT06C Essentailas of HRM 300 Kolkata ICT Sukanta Kumar Naskar 20/11/2023 24/11/2023 1 Teachers and After completion of the programme, the participants
support staff will be able to
 Identify the components of HRM
 Practice the components of HRM in their
respective organization
176. PS65C Essentials of 300 Kolkata ICT Habiba Hussain 20/11/2023 24/11/2023 1 Teachers from After completion of the programme, the participants
Outcome based HEIs will be able to
education  Identify essential components in OBE
 Explain the need for pradigm shift
 Implement the principles of OBE
 Compare the strategies in OBA

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
177. PS66C NBA, NIRF and NAAC 300 Kolkata Hybrid Rayapati Subbarao 20/11/2023 24/11/2023 1 Faculty of all After completion of the programme, the participants
accreieditaion disciplines will be able to
aspects  Identify the Impact of NBA Accreditation.
 Prepare Vision, Mission, Program Educational
Objectives.
 Prepare Outcomes and Program Outcomes.
 Learn how to prepare SAR for NBA.
 Practice Self Study Report (SSR) for NAAC.
 Identify the use of ranking framework.
178. CU107F Engineering Free Guw Contact Prasanta Sarkar 27/11/2023 01/12/2023 1 Faculty and After completion the programme, the participants
Capstone Project Technical Staff will be able to
of all  Form Capstone Project Team
Disciplines  Identify Capstone Project topic
 Prepare Capstone Project proposal
 Develop Capstone Project
Assess Capstone Project
179. CU108C Bio-Medical 300 BBSR Contact Subrata Chattopadhyay 27/11/2023 01/12/2023 1 Faculty of all After completion of the programme, the participants
Instrumentation disciplines will be able to
 Discuss Cells, Digestive System, Excretory System,
Endocrinology
 describe Origins of electro-physiological signal and
their characteristics
 design practical clinical sensors and transducers
 Explain the operation of X-ray, Fluoroscopy and
Radiography, Pacemaker, Magnetic Resonance
Imaging etc.
 Explain Electric shock hazards and safety devices
180. PS67B NEP 2020: 700 Kolkata ICT Urmila Kar 27/11/2023 01/12/2023 1 Faculty After completion of the programme, the participants
Plan for members and will be able to
Implementation technicians  Explain the New vision and major reforms
from all identified in NEP 2020
Higher  Identify the issues and challenges in
Educational implementation of NEP 2020 for HEIs
Institutes  Prepare Institutional Development Plan (IDP)

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
181. CU109A Fundamental and 3000 Kolkata Contact Subrata Mondal 04/12/2023 15/12/2023 2 Faculty of all After completion the programme, the participants
Applications of disciplines will be able to
Nanomaterials  explore the concept of nanotechnology;
 describe the fundamental of nanoscale materials’
properties;
 identify various carbon based nanomaterials;
 describe applications of nanomaterials in various
fields;
 explain the nano toxicology and nano safety etc.
182. CU110C MATLAB & Fuzzy 300 BBSR Contact Soumitra Kumar 04/12/2023 08/12/2023 1 Faculty and After completion the programme, the participants
Logic Control Mandal Lab will be able to
Technician of  Discuss fundamentals of MATLAB
Engineering  Implement MATLAB Applications in Control System
and  Explain the different aspect of Fuzzy Logic Control
Polytechnic  Develop simple model using Fuzzy tool box
Colleges in EE,
ECE ,EEE and
EIE
183. CU111B Refresher Course on 700 Kolkata Hybrid Sagarika Pal 04/12/2023 08/12/2023 1 Faculty of After completion of the programme, the participants
Sensors and Electrical, will be able to
Instrumentation Electronics  Differentiate sensors, transducers and actuators
and  Classify different sensors, transducers and
Communicatio actuators in industry
n,  Apply various process control techniques
Mechanical,  Explain the concept of Smart sensors in modern
Electronics & instrumentation
Instrumentati
on
disciplines

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
184. CU112C Environmental 300 In-house Contact Sailendra Nath Mandal 04/12/2023 08/12/2023 1 Faculty and After attending the programme the participants will
Pollution and Health Staff of any be able to gain and develop
discipline  knowledge of basic concept of Air pollution, Water
pollution, Noise pollution, Light pollution and
impact on human health,
 skill of handling conventional and modern
sophisticated equipment, preparation of
laboratory instruction sheets, interpreting
experimental results, providing laboratory
instruction such as to develop in enquiring attitude
among students, preparing related test reports,
 attitude of hands-on-working in the
laboratory/field. (Plant Visit)
185. CU113C Application of Green 300 Kolkata Contact Dipankar Bose & Arpan 04/12/2023 08/12/2023 1 Faculty After completion of the programme, the participants
Design and Kumar Mondal members of will be able to
Manufacturing in Technical  Explain the concept and goals of green
Mechanical Institutions manufacturing
Engineering with  Illustrate life cycle approaches to product design
specialization  integrate green design and manufacturing
ME,AE and concepts of Mechanical Engineering
Production
Engineering
186. PS68B Academic Writing 1400 Kolkata Contact Rayapati Subbarao, 04/12/2023 15/12/2023 2 All Discipline After completion the programme, the participants
and Tools Kinsuk Giri & Samir Roy will be able to
 Identify the different ways of presenting an
academic report.
 Detail the steps involved in writing a research
article.
 Obtain the skills of writing a thesis or research
report.
 Illustrate the ways of using different tools for
writing a thesis.
 Apply different tools for academic purposes.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
187. PS69A Online Pedagogy 900 Kolkata ICT Habiba Hussain 04/12/2023 06/12/2023 3- Teachers from After completion of the programme, the participants
days HEIs will be able to
 Explain the need for online pedagogy
 Plan online instruction
 Incorporate different principles for effective online
delivery
188. PS70C Induction Training 300 Guw Contact Sheela Yadav Rai 04/12/2023 08/12/2023 1 Faculty from After completion of the programme, the participants
all Discipline will be able to
 Formulate the lesson plan
 Prepare the instructional objectives
 Identify the principles of evaluation
 Distinguish between types of evaluation
189. CU114B Additive and 700 Kolkata Contact Arpan Kumar Mondal 11/12/2023 15/12/2023 1 Technical After completion of the programme, the participants
Substractive teachers and will be able to
Manufacturing Staff  Classify the various additive and substractive
from manufacturing processes
Mechanical  Explain the working principle of various additve
Engineering or and substractive manufacturing processes
allied  Perform independently various additive and
disciplines substractive manufacturing processes
190. CU115C CAD/CAM 300 Kolkata Contact Nirmal Kumar Mandal 11/12/2023 15/11/2023 1 Mechanical, After completion of the programme, the participants
Production, will be able to
&Industrial  Define automation.
 Classify automation
 Operate automated system.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
191. CU116C Analysis and Design 300 Kolkata Hybrid Santanu Bhanja 11/12/2023 15/12/2023 1 Faculty of After completion of the programme, the participants
of structures using Civil, will be able to
latest version of a Architecture  Identify the role of software in structural analysis
Structural & allied and design
Engineering disciplines  Discuss the basic features of a universally accepted
Software [Link] Connect- latest version along
with RCDC
 Apply IS Codal provisions in analysis, design and
detailing - IS 456, 1893, 875, 13920 etc.
 Analyse, design and detail real-life multi- storeyed
buildings, civil engineering structures
 Analyse and design foundations
192. MGT07F Essentials of Free Kolkata e-STTP Sukanta Kumar Naskar 11/12/2023 15/12/2023 1 Teachers and After completion of the programme, the participants
Institutionl support staff will be able to
Managemnt  Identify the components of institutional
management
 Apply the institutional management components
effectively
 Correlate the institutional management
components with institutional objectives
193. PS71B Effective Teaching 700 Kolkata ICT Indrajit Saha 11/12/2023 15/12/2023 1 Faculty of all After completion the programme, the participants
and Research disciplines will be able to
 Demonstrate classroom teaching skills in different
modes
 Use digital tools in classroom teaching
 Conduct research for academic development
194. PS72C Preparing Question 300 Guw Contact Urmila Kar 11/12/2023 15/12/2023 1 Faculty After completion of the programme, the participants
Bank for effective members and will be able to
assessment of technicians  Relate Bloom’s taxonomy with learning
learning from all assessment
Higher  Identify Tools and techniques for assessment
Educational  Explain characteristics of good achievement test
Institutes  Design an effective achievement test
 Generate test items for preparing question bank

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
195. PS73C Digital Tools for 300 Kolkata Hybrid Chandan Chakraborty 11/12/2023 15/12/2023 1 Faculty & Staff After completion of the programme, the participants
Teachers and Staffs will be able to
 Develop understanding of various ICT tools for
classroom teaching.
 Explore Learning Management System
 Plan classroom and related online activities
196. CU117C Advanced Process 300 BBSR Contact Subrata 11/12/2023 15/12/2023 1 Faculty of After completion of the programme, the participants
Control using PLC, Chattopadhyay Electrical, will be able to
DCS and SCADA Electronics and •Explain closed loop control system
Communicatio • Illustrate pressure, Temperature, Flow & Level
n, Measurement system
Mechanical, • Discuss hazardous area classification
Electronics & • Utilize the electrical instruments in hazardous area in
Instrumentatio process plant
n • Design the conventional complex control system like
disciplines ratio, cascade, feed forward, selective, override etc.
• Apply the control system in distillation column in
industry
•Explain fundamental of PLC, DCS and SCADA

197. PS74C Research 600 Kolkata ICT Habiba Hussain 11/12/2023 22/12/2023 2 Teachers from After completion of the programme, the participants
Methodology HEIs & will be able to
research  Identify research problem
scholars  Expalin the steps in conducting research
 Review literature
 Characterise methods for research in technical
education
 Relate different statistical techniques
 Compare research proposal & research report
198. CU118C CEA Regulations 300 Kolkata ICT Prasanta Sarkar 18/12/2023 22/12/2023 1 Faculty of all After completion the programme, the participants
2010 and Code of Disciplines will be able to
Practices  Discuss Indian Electricity Act and National Electric
Code
 Explain fundamental principles for electrical
installation
 Design electrical installation
 Enforce safety in electrical work

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
199. CU119F Commentary IS:456- Free Kolkata ICT Santanu Bhanja 18/12/2023 22/12/2023 1 Faculty of After completion the programme, the participants
2000 with Expected Civil, will be able to
Modifications In the Architecture  Identify the steps to be taken for concrete
Forthcoming & allied production, quality control and testing
Revision disciplines  Interpret some of the important clauses of the
code in their true letter and spirit
 Implement the codal clauses in a better manner for
design and construction of Civil Engineering
Structures
 Discuss the philosophy and principles of Limit State
Method in a comprehensive manner
 Conceive that this code cannot be considered as a
one package for the design of concrete structures
and has to be mandatorily read in conjunction with
other codes
 Identify the major design and detailing
considerations
 Discuss amendments of this standard
 Discuss limitations and probable modifications
200. CU120F Introduction to Free Guw Contact Rajeev Chatterjee 18/12/2023 22/12/2023 1 Faculty of all After participating in this program, the participants
Coding Theory Disciplines will be able to:
•Explain information, quality of Information, and
Information entropy,
•Demonstrate the working principles and design of
AES, DES,
•Demonstrate various encoding techniques like
Arithmetic Encoding, Huffman Encoding, Hamming
Code, Gray code, JPEG Encoding Standard, etc., and
•Demonstrate the applications of coding techniques
in the area of Networking and Communication
201. CU121C Testing of Bituminus 300 Kolkata Contact Mithu Dey 18/12/2023 22/12/2023 1 Faculty of Civil After completion of the programme, the participants
Material and allied will be able to
branch  Demonstrate the different test on bitumen
 Handle the instrunment.
 Explain the significance of test on bituminous
material
 Write the technical report
Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management
Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
202. PS75A Fundamentals of 1500 Kolkata e-STTP Indrajit Saha, 18/12/2023 22/12/2023 1 Faculty of allAfter completion the programme, the participants
Problem-Based Sagarika Pal, disciplines will be able to
Learning. Kinsuk Giri &  Explain the basic problem-solving strategies in
Arpan Kumar classroom
Mondal  Identify specific problems covering a particular
area of learning
 Solve problems in various branches of Engineering
through PBL
 Analyse the benefits associated with PBL compared
to conventional learning
203. CU122C Commentary for 300 Kolkata ICT Santanu Bhanja 26/12/2023 30/12/2022 1 Faculty of After completion of the programme, the participants
Code on Ductility Civil, will be able to
Design and Detailing Architecture  Explain the fundamental principles of RC design as
of RC structures & allied per Indian Standards - the fundamentals of Limit
subjected to Seismic disciplines State Method and need for ductility design
Forces - IS 13920  Interpret some of the important clauses of the
2016 code in their true letter and spirit
 Implement the codal clauses in a better manner for
design and detailing of Earthquake Resistant
Structures
 Identify the major design and detailing
considerations
 Apply a standard software for designing structures
204. PS76A Design thinking in 900 Kolkata ICT Habiba Hussain 02/01/2024 04/01/2024 3- Teachers from After completion of the programme, the participants
education days HEIs will be able to
 Distinguish between design thinking as an
approach & a process
 Explore areas where design thinking can be
implemented in education
 Analyse the steps in design thinking

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
205. CU123A Additive 1500 Kolkata Contact Arpan Kumar Mondal 08/01/2024 12/01/2024 1 Technical After completion the programme, the participants will
Manufacturing: teachers and be able to
Theory and Recent Stafffrom  Classify the various additive manufacturing
Advances Mechanical processes
Engineering or  Explain the working principle of various additive
allied manufacturing processes
disciplines  Discuss recent advances in Additive Manufacturing

206. CU124C Mathematical 300 Kolkata Contact Kinsuk Giri & 08/01/2024 12/01/2024 1 Any Science After completion of the programme, the participants
Foundation of Samir Roy and will be able to
Computer Science Engineering  explain mathematical/logical foundation of
Stream computations
 model computational tasks in terms of
mathematical formalism
 apply appropriate mathematical tools to solve
computational problem
207. MGT08F Laboratory Free Guw Contact Dipankar Bose 08/01/2024 12/01/2024 1 Faculty After completion of the programme, the participants
Management memebers of will be able to
all disciplines  Identify various management issues of conducting
from different laboratory and workshop classes
technical  Explain effective techniques of management of
institutions classroom, machines/equipment and manpower
 state different safety aspects
208. PS77A Creativity and 1500 Kolkata Hybrid Sagarika Pal 08/01/2024 12/01/2024 1 Faculty of all After completion the programme, the participants
Critical Thinking disciplines will be able to
 Explain the concept of creativity and critical
thinking
 Suggest strategies to promote creativity in
teaching-learning process
 Apply the techniques of creative problem solving
 Identify the stages of design thinking approach to
new product development

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
209. PS78C Designing Direct and 300 BBSR Contact Urmila Kar 08/01/2024 12/01/2024 1 Faculty After completion of the programme, the participants
Indirect Assessment members and will be able to
Tools under OBE technicians  Identify tools and techniques for assessment and
from all evaluation of learning outcomes under OBE
Higher  Design direct tools for assessment of learning in
Educational  Knowledge domain
Institutes  Psychomotor domain
 Affective domain
 Design indirect tools for learning assessment
210. PS79C Community 300 Kolkata ICT Sheela Yadav Rai 08/01/2024 12/01/2024 1 Faculty from After completion of the programme, the participants
Development all Discipline will be able to
through Technical  Identify various Community Development Schemes
Institutes  Explain Feasibilty Report
 Prepare Reports
 Establish linkages with organisations
211. CU125B Fundamentals of 700 Kolkata Contact Indrajit Saha 15/01/2024 19/01/2024 1 Faculty from After completion of the programme, the participants
Image Editing and all HEIs will be able to
2D Animation  Edit images
 Create animation
 Demonstrate use of various multimedia related
software
 Prepare a computer based training material
212. CU126B Artificial Intelligence 700 Kolkata Hybrid Chandan Chakraborty 15/01/2024 19/01/2024 1 Faculty of CSE, After completion of the programme, the participants
& its Applications IT, MCA, will be able to
Biomedical  Discuss overview of AI technologies.
disciplines  Explain Machine Learning, Deep Learning &
Reinforcement Learning
 Explain Logic and Automated Reasoning Systems
 Explore popular AI platforms, such as AWS, Google
Cloud AI, Microsoft Azure Learning Studio, and IBM
Watson

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
213. CU127F Bio-Medical Free Guw Contact SubrataChattopadhyay 15/01/2024 19/01/2024 1 Faculty of After completion of the programme, the participants
Instrumentation Electrical, will be able to
Electronics  Discuss Cells, Digestive System, Excretory System,
and Endocrinology
Communicatio  describe Origins of electro-physiological signal and
n, their characteristics
Mechanical,  design practical clinical sensors and transducers
Electronics &  Explain the operation of X-ray, Fluoroscopy and
Instrumentati Radiography, Pacemaker, Magnetic Resonance
on Imaging etc.
disciplines  Explain Electric shock hazards and safety devices
214. MGT09B Institutonal 700 In-house Contact Sukanta Kumar Naskar 15/01/2024 19/01/2024 1 Teachers and After completion the programme, the participants will
Management & support staff be able to
Administrative  Identify the components of institutional
procedures management
 Apply the institutional management components
effectively
 Correlate the institutional management
components with institutional objectives
 Identify the administrative procedures to manage
department / institute
 Apply the procedures
215. PS80F Advanced Pedagogy Free Kolkata ICT Arpan Kumar Mondal & 15/01/2024 26/01/2024 2 Technical After completion of the programme, the participants
Sukanta Kumar Naskar teachers will be able to
from all  Explain the need of Advanced Pedagogy
disciplines  Explain fundamental strategies of advanced
pedagogy techniques
 Explain different Advanced Pedagogy Approaches
 Plan instruction
 Incorporate different principles for effective
delivery and assessment
216. CU128C Applied 300 BBSR Contact Nirmal Kumar Mandal 15/01/2024 19/01/2024 1 All Disciplines After completion of the programme, the participants
Optimization will be able to
 Explain linear and nonlinear regression
 Optimise a function using GA, PSO
 Use MATLAB

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
217. CU129B Refreshers course 700 Kolkata ICT Mithu Dey 22/01/2024 26/01/2024 1 Faculty of Civil After completion of the programme, the participants
on Finite Element and allied will be able to
Method branch  Explain the use of FEM
 Solve the problem using FEM
 Discuss different features of FEM software
218. CU130A Capstone Project 1500 Kolkata ICT Urmila Kar 29/01/2024 02/02/2024 1 Faculty After completion the programme, the participants will
members and be able to
technicians  Explain the role of capstone project in technical
from all program
Higher  Justify the importance of capstone team formation
Educational and communication
Institutes  Explain project selection through SWOC analysis
 Develop format for proposal submission
 Explain the steps involved in design validation and
implementation
 Decide strategies to capstone project evaluation
219. PS81B ICT Enabled Learning 700 Kolkata Contact Rajeev Chatterjee, 29/01/2024 02/02/2024 1 Faculty of all After completion the programme, the participants
in 21st Century Samir Roy & Ranjan disciplines will be able to
Dasgupta  Explain the changing scenario of education in 21st
century
 Explain the concept of e-learning / TEL
 Exhibit and demonstrate the process of e-content
creation for MOOCs based e-content
 Illustrate ethics, plagiarism, etc. in the context of
21st century learning
 Explain lifelong learning
 Explain the development of virtual Laboratory
220. PS82C NBA Accreditation 300 Guw Contact Arpan Kumar Mondal & 29/01/2024 02/02/2024 1 Technical After completion of the programme, the participants
and SAR Preparation Ranjan Dasgupta teachers will be able to
for Polytecnics from all  Identify the Impact of NBA Accreditation
disciplines  Explain Washington accord
 Prepare Vision, Mission, PEO and PSO
 Prepare CO-PO mapping
 Prepare pre-qualifier and SAR.
 Establish correlations among criteria 1 to 10

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
221. PS83C Quality 300 Kolkata ICT Rayapati Subbarao 29/01/2024 02/02/2024 1 Faculty of all After completion of the programme, the participants
Improvement of the disciplines will be able to
program and  Identify appropriate teahcing learning processes.
institute  Prepare Vision, Mission, Program Educational
Objectives.
 Prepare Outcomes and Program Outcomes
 Implement different qulaity aspects.
222. CU131A Estimating and 1500 Kolkata Contact Sheela Yadav Rai 05/02/2024 09/02/2024 1 All Discipline After completion the programme, the participants will
Costing of Non- be able to
conventional Energi  Describe various type of Non-conventional
es Energies Sources
 Explain the scope of Solar energy, Solar Thermal
Conversion, Solar Collector, Wind Energy
 Estimate costing of various energies
223. CU132B LabVIEW 700 Kolkata Hybrid Subrata Chattopadhyay 05/02/2024 09/02/2024 1 Faculty of After completion of the programme, the participants
Architecture, Electrical, will be able to
Programming and its Electronics  Discuss the features, dataflow programming, and
applications in and common LabVIEW architectures.
Measurement & Communicatio  Develop test and measurement, data acquisition,
Control n, instrument control, data logging, and
Mechanical, measurement analysis applications using LabVIEW
Electronics &  Develop interfacing of input output devices with
Instrumentati LabVIEW
on  Implement the LabVIEW in Measurement &
disciplines Control System and its trouble shooting
 Create applications using a state machine.
 Design pattern to acquire, process, display, and
store real-world data

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
224. CU133C Analysis and Design 300 BBSR Contact Santanu Bhanja 05/02/2024 09/02/2024 1 Faculty of After attending the programme, the participants will
of structures using a Civil, be able to
powerful Structural Architecture &  Identify the role of software in structural analysis
Engineering allied and design
Software disciplines  Explain the basic features of a universally accepted
[Link] Connect- latest version along
with RCDC
 Apply IS Codal provisions in analysis, design and
detailing - IS 456, 1893, 875, 13920 etc.
 Analyse, design and detail real-life multi- storeyed
buildings, civil engineering structures
 Analyse and design foundations
225. CU134F Cloud Computing Free Kolkata Contact Kinsuk Giri & Ranjan 05/02/2024 09/02/2024 1 Faculty with After completion of the programme, the participants
and HPC Dasgupta any Science will be able to
and  Identify different hardware components of
Engineering modern computer
Stream  Explain the limitation of modern computer in
context of HPC
 Discuss the features of HPC and Cloud Computing
226. PS12A Advanced Pedagogy 3000 Kolkata ICT Sukanta Kumar Naskar 05/02/2024 16/02/2024 2 Faculty of all After completion the programme, the participants
disciplines will be able to
 Appreciate the taxonomy of T-L
 identify evaluation,assessment, and test
 Evaluate skills
 Manage laboratory
 Use modern tools in T-L
Apply classroom management methods

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
227. CU135A Additive 1500 Kolkata Contact Subrata Mondal 12/02/2024 16/02/2024 1 Faculty of After completion the programme, the participants will
Manufacturing of Chemical be able to
Polymers for Engg.  explore the state-of-the-art additive
Biomedical Mechanical manufacturing research;
Applications Engg.,  describe different types of additive manufacturing
Science, processes;
Textiles Engg., identify property requirements of materials for the
Materials Sci. biomedical applications;
& Engg.,  describe advantages of polymer for the biomedical
Polymer Engg. applications;
and allied  fabricate various biomedical implants by using 3-D
disciplines printing process etc.
228. PS84C NEP-2020 & its 300 In-house Contact Chandan Chakraborty 12/02/2024 16/02/2024 1 Faculty from After completion of the programme, the participants
Implementation all disciplineswill be able to develop understanding on
 Multidisciplinary & Holistic Education
 Equity & Inclusion
 Motivated Energized & Capable Faculty
 Technology use & Integration
 Global Outreach of Higher Education
 Promotion of Indian Knowledge Systems etc.
229. PS85C NBA Accreditation 300 Guw Contact Rayapati Subbarao 12/02/2024 16/02/2024 1 Faculty of all After completion of the programme, the participants
and SAR preparation disciplines will be able to
 Identify the Impact of NBA Accreditation.
 Prepare Vision, Mission, Program Educational
Objectives
 Prepare Outcomes and Program Outcomes
 Prepare SAR.
 Establish correlations among Criteria i to x.
230. PS86C Designing question 300 BBSR Contact Habiba Hussain 12/02/2023 16/02/2024 1 Teachers from After completion of the programme, the participants
paper HEIs will be able to
 Characterise types of assessment
 Develop table of specifications
 Differentiate the evaluation tools
 Prepare rubrics

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
231. PS87B Best Pedagogical 420 Kolkata Contact Urmila Kar 14/02/2024 16/02/2024 3- Faculty After completion of the programme, the participants
practices for days members and will be able to
Effective Teaching- technicians  Identify existing pedagogical practices in Higher
learning from all Education.
Higher  Explore pedagogy for creating thinking classroom
Educational  Explain pedagogy for creating learning space
Institutes
232. CU136C Vibrations in 300 Kolkata Contact Nirmal Kumar 19/02/2024 23/02/2024 1 Faculty from After completion of the programme, the participants
Engineering Systems Mandal&Santanu all disciplines will be able to
Bhanja  Model vibrations of a physical systems
 Model acoustics of a physical system.
233. CU137F Industrial Free Kolkata Hybrid Sagarika Pal 19/02/2024 23/02/2024 1 Faculty of After completion of the programme, the participants
Instrumentation Electrical, will be able to
Electronics  Explain Conventional control techniques for
and industrial automation
Communicatio  Describe complex controls such as ratio, cascade,
n, feed forward etc.
Mechanical,  Develop programme on PLC and DCS for process
Electronics & automation
Instrumentati  Explain SCADA systems for various process control
on systems
disciplines
234. MGT10C Managemnt for 300 Guw ICT Sukanta Kumar Naskar 19/02/2024 23/02/2024 1 Office staff After completion of the programme, the participants
offce staff and officers will be able to
 Identify the components of management useful for
day to day work
 Correlate and apply the management principles in
day to day activities
 Identify management tools for solving problems
related to day to day activities
 Apply management tools

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
235. PS88F Guiding Innovative Free BBSR Contact Dipankar Bose 19/02/2024 23/02/2024 1 Faculty After completion of the programme, the participants
student project memebers of will be able to
work all disciplines  Identify characteristics of innovative projects
from different  distinguish between creativity and innovation
technical  Explain guiding principles of student projects
institutions
236. PS89C NBA Accreditation 300 BBSR Contact Arpan Kumar Mondal & 26/02/2024 01/03/2024 1 Technical After completion of the programme, the participants
and SAR Preparation Ranjan Dasgupta teachers will be able to
for Polytecnics and from all  Identify the Impact of NBA Accreditation
Engineering Colleges disciplines  Prepare Vision, Mission, PEO and PSO
 Prepare CO-PO mapping
 Prepare pre-qualifier and SAR.
 Establish correlations among Criteria 1 to 10
 Explain Washington accord
 Explain essence of CEP and LLL
237. CU138F Fundamentals of Free Guw Contact Indrajit Saha 26/02/2024 01/03/2023 1 Faculty of all After completion the programme, the participants
Machine Learning disciplines will be able to
 describe the fundamentals of Machine Learning
(ML)
 apply ML for clustering, classification and
regression
 explain machine learning in classroom

238. CU139C Engineering 300 Kolkata Contact Rayapati Subbarao 04/03/2024 08/03/2024 1 Faculty of all After completion of the programme, the participants
Thermodynamics disciplines will be able to
and its Applications  Paraphrase the basics of thermodynamics.
 Apply laws of thermodynamics in various
problems.
 Interpret the working principle and features of
steam engines, turbines and condensers.
 Explain the basics of i.c. engines and analyze the
performance of gas turbines.
 Review the processes of a steam power plant.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
239. CU140B Analysis and Design 700 BBSR Contact Mithu Dey 04/03/2024 08/03/2024 1 Faculty of Civil After completion of the programme, the participants
of Structures using and allied will be able to
Sap 2000 branch  Identify different methods of analysis using
software
 use of relevant codes for design and detailing of RC
structures
 Discuss different features of SAP 2000

240. CU141B Sensors and 700 Kolkata Hybrid Subrata 04/03/2024 08/03/2024 1 Faculty of After completing the course the participants will be
Instrumentation for Chattopadhyay Electrical, able to
today’s Automation Electronics • Differentiate sensors, transducers and actuators
• Classify different sensors, transducers and actuators
and ECE,
in industry
Mechanical, • Apply various process control techniques
Electronics & • Explain the concept of Smart sensors in modern
Instrumentati instrumentation
on disciplines
241. PS90C Induction Training 300 Kolkata Hybrid Indrajit Saha, 04/03/2024 08/03/2024 1 Faculty of all After completion the programme, the participants will
Sagarika Pal, disciplines be able to
Kinsuk Giri &  Prepare the instructional objectives
Arpan Kumar  Formulate the lesson plan
Mondal  Differentiate between Assessment and Evaluation
 Design the table of Specification
 Prepare the question paper
 Evaluate skill in the laboratory
242. PS91B Research 700 Guw ICT Chandan Chakraborty 04/03/2024 08/03/2024 1 Faculty of After completion the programme, the participants will
Methodology & IPR Engineering & be able to
Science, Allied  Develop understanding of the research design,
disciplines interdisciplinary research in the line of NEP 2020.
 Explore about systematic literature review with
PRISMA
 Demonstrate in-depth knowledge in statistical
methods and models
 Discuss overview of patents, copyrights,
trademarks etc
 Explain patent filing process and related issues.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
243. PS92B Psychology and 420 Kolkata ICT Sukanta Kumar Naskar 06/03/2024 08/03/2024 3- Teachers and After completion of the programme, the participants
Mental health days research will be able to
scholars  Identify stress and factors of stresses
 Explain how to cope up with stress
 Explain emotional intelligence and resilience
 Discuss overview of mindfulness
244. CU142A Introduction to 1500 In-House Contact Indrajit Saha 11/03/2024 15/03/2024 1 Faculty of After completion of the program, the participants will
Bioinformatics alldisciplines be able to:
CSE, IT, BCA,  describe the basic principles and concepts of
MCA ECE, EE, biology, computer science and mathematics
ME, CIVIL  apply Machine Learning in Bioinformatics
 explain Bioinformatics in classroom
245. CU143B Renewable Energy 700 Kolkata e-STTP Sheela Yadav Rai 11/03/2024 15/03/2024 1 Faculty from After completion the programme, the participants will
Sources and all Discipline be able to
Emerging  Identify Energy Sources and their utilization
Technologies  Explain Environmental aspects of electric energies
generation
 Explain the scope of Solar Thermal Conversion and
Solar Photovoltaic system
 Describe about wind energy, Geothermal energy
and Biomass
 Apply Non-conventional energies through various
agencies [Link]
246. CU144C Finite Element 300 Kolkata ICT Nirmal Kumar Mandal 11/03/2024 15/03/2024 1 Faculty from After completion of the programme, the participants
Analysis all relevant will be able to
Disciplines  Explain a mechanical system.
 Use software packages to analyse mechanical
system.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
247. CU145C Commentary for 300 BBSR Contact Santanu Bhanja 11/03/2024 15/03/2024 1 Faculty of After completion of the programme, the participants
Code on Ductility Civil, will be able to
Design and Detailing Architecture  Explain the fundamental principles of RC design as
of RC structures & allied per Indian Standards - the fundamentals of Limit
subjected to Seismic disciplines State Method and need for ductility design
Forces - IS 13920  Interpret some of the important clauses of the
2016 code in their true letter and spirit
 Implement the codal clauses in a better manner for
design and detailing of Earthquake Resistant
Structures
 Identify the major design and detailing
considerations
 Apply a standard software for designing structures
248. PS93A Thinking Classroom 1500 Kolkata ICT Urmila Kar 11/03/2024 15/03/2024 1 Faculty After completion the programme, the participants will
and Life-long members and be able to
Learning technicians  identify features of learning-teaching system in HE
from all  analyse the learning preferences of students
Higher  explain the need for Thinking Classroom and Life
Educational Long Learning
Institutes  identify innovative approaches for creating
Thinking Classroom
 explore the ways to faciliate active learning and
life-long learning into HEIs.
249. PS94C Designing question 300 Guw Contact Habiba Hussain 11/03/2024 15/03/2024 1 Teachers from After completion of the programme, the participants
paper HEIs will be able to
 Characterise types of assessment
 Develop table of specifications
 Differentiate the evaluation tools
 Prepare rubrics
250. PS95C Assessment and 300 Kolkata e-STTP Dipankar Bose 11/03/2024 15/03/2024 1 Faculty After completion of the programme, the participants
Evaluation memebers of will be able to
all disciplines  distinguish between assessment and evaluation
from different  plan assessment by designing suitable
technical questionnaire/tools
institutions  explain rubric for assessment and evaluation.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
251. CU146B Machine Learning 700 Kolkata ICT Kinsuk Giri & 18/03/2024 22/03/2024 1 Any Science After completion of the programme, the participants
with Python Chandan Chakrabarty and will be able to
Engineering  Explain the notion of Machine Learning and its
Sytream impact on future employment
 Discuss overview of Python programming
 Develop an exposure of supervised and
unsupervised ML techniques
 Implement ML algorithms using Python through
hands-on-practice
 Explore for problem solving
252. MGT11C Institutionl 300 BBSR ICT Sukanta Kumar Naskar 18/03/2024 22/03/2024 1 Teachers and After completion of the programme, the participants
Management managerial will be able to
staff  Identify the components of institutional
management
 Apply the institutional management components
effectively
 Correlate the institutional management
components with institutional objectives
253. CU147B Application of open 700 Kolkata ICT Mithu Dey 25/03/2024 29/03/2024 1 Faculty of Civil After completion the programme, the participants will
source software in and allied be able to
civil engineering branch  Identify different Open source softaware
 Discuss the feature of theses softawre
 Use open source software in civil engineering
254. CU148C Introduction to 300 Guw Contact Kinsuk Giri 25/03/2024 29/03/2024 1 All After completion the programme, the participants will
LaTeX in Word be able to
Processing • Identify Word Processing Tools
•describe the fundamentals LaTeX programming
•apply LaTeX for preparing scientific and non-
scientific documents

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Sl. Prog. Programme Title Course Venue Prog. Programme Co- Date Target Programme Objectives

Week
No. Code Fees Mode ordinator(s) From To Participant /
(Rs.) Group
255. CU149B Advanced Process 700 Kolkata Hybrid Subrata Chattopadhyay 25/03/2024 29/03/2024 1 Faculty of After completion of the programme, the participants
Control using PLC, Electrical, will be able to
DCS and SCADA Electronics  Explain closed loop control system
and  Illustrate pressure, Temperature, Flow & Level
Communicatio Measurement system
n,  Discuss hazardous area classification
Mechanical,  Utilize the electrical instruments in hazardous
Electronics & area in process plant
Instrumentati Design the conventional complex control system
on like ratio, cascade, feed forward, selective,
disciplines override etc.
 Apply the control system in distillation column in
industry
 Explain fundamental of PLC, DCS and SCADA
256. CU150C Vibration in 300 Kolkata Hybrid Santanu Bhanja 25/03/2024 29/03/2024 1 Faculty of After completion of the programme, the participants
Engineering Systems Engineering will be able to
with  Identify different types of vibrations
preference  Explain the importance of vibration analysis in
to Mechanica Mechanical and Civil Engineering
l, Civil,  Discuss the application of vibration analysis in
Architecture design of machines
& allied  Identify the major design and detailing
disciplines considerations of structures subjected to
vibrations

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]


GENERALINSTRUCTIONS TO THE PARTICIPANTS

 Please send your application 20 days (for Contact Mode FDP) and preferably 7 days (for
ICT/Online mode FDP) before the commencement of the programme.
 Applicants may send their applications by email/Post/Google Form (see institute’s
website: [Link] with payment details for each
programme.
 Participants are requested to submit only one application for a particular Faculty Development
Programme.
 Selected participants will be received confirmation mail from the Academic Section. Without
prior confirmation nobody will be allowed to attend the training programme.
 Participants are advised to complete the registration formalities before 9:30 a.m. on the first
day of the programme at the Training Cell of NITTTR, Kolkata for offline programmes.
 After completing the registration formalities, you need to report to the respective
coordinator(s). Necessary guidance from the Training Cell will be given in this respect.
 Last day of the training programme, certificates will be distributed by the coordinator(s) along
with a release letter in case of offline courses and to be sent by mail in case of online courses.
 No leave(s) permissible during the training programme, except in case of emergency with
submission of evidence of reason.
 The participants will be relieved only on the last day of the programme at 5.30 pm. If
participants do not attend the full programme, neither certificate nor TA will be paid to them.
 The participants willing to attend the programmes at Extension Centers should contact the
respective Consultant, Extension Center / FIC Training Cell for accommodation confirmation
and food facility.
 Training programmes scheduled at extension centres are state specific and open only for
respective state participants.
 Participants only from the Government and Government Aided / Government sponsored
Institutes will be reimbursed TA as per Institute’s rules.
 Participants from North Eastern (NE) States are entitled to travel by air (economy class) and
the same will be reimbursed on production of proof of to and fro travel ticket(s). Tickets are
to be purchased from the authorized travel agent of Govt. of India as announced time to
time.
 The participants from the provinces other than N.E. states will be reimbursed 3rd AC train or
equivalent fare.
 Boarding and Lodging facilities are provided on a sharing basis. Family members are not
allowed to stay in the Guest Houses.
 Course Fees will be charged as per the Category of the Training Programme and itcan be
remitted through NEFT, Bank Transfer or through demand draft drawn in favour of Director,
NITTTR, Kolkata payable at Kolkata.

Bank details:
Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management
Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.

 Programme Calendar 2023-24
Application Form Link: [Link]
Application Google Form Link: [Link]

Name of the Bank: State Bank of India,Sector – 1, Salt Lake Branch,
Bank Holder: NITTTR, Kolkata, Bank A/c No.: 00000034181726656,
IFSC Code: SBIN0001612

 Course Fee Details:

Category of FDP Category - A Category - B Category - C FREE
Fees per participant/ Rs. 1500/- Rs. 700/- Rs. 300/- No fees
week

 Participants from Private and Self Financed Institutes will not be paid TA. These participants
can avail Boarding and Lodging facilities in Executive Hostels, by paying fees Rs. 300/- per
bed/day for Accommodation Charge and Meal Charge of Rs. 250/- per day per participant
(rate may vary from time to time), working lunch is free.

Processing TA:

 Those who are eligible to reimburse TA should apply in the prescribed form or through an
online facility available in the Academic Section (for programmeas at NITTTR-Kolkata only)
along with all supporting documents with signature from the course coordinator(s) and
submit to the academic section.
 TA will be reimbursed directly to the bank account of the trainee.

Instructions to participants from NE States and A&N Islands regarding purchase of Air
Ticket:
Air ticket to be purchased directly from Airlines (at Booking counters office/Website of Airlines) or
from three authorized Travel Agents viz., M/s Balmer Lawrie& Company, M/s Ashok Travels
&Tours and IRCTC. Henceforth relaxation on account of ignorance/unawareness of these
guidelines will not be considered under any condition.

How to Reach NITTTR, Kolkata:

The Institute is located in FC Block, Sector-III in Salt Lake City (near Labony Island).It is well
communicated by road with Howrah Railway Station (about 8.1 km via Maniktala Main Road),
Sealdah Railway (7.4 km) via Beliaghata Main Road and Broadway Road), Kolkata Railway Station
(4.8 km) via Canal Circular Road, Shalimar Station (18.8 km) via Parama Island Maa Flyover, Netaji
Subhas Chandra Bose International Airport (11.5 km) via Kazi Nazrul Islam Sarani/VIP Road.

Prog. Code: CU – Contant Update, PS – Professional Skill, MGT – Management

Prog. Mode: Contact - Offline, ICT – Online, Hybrid – Both online and offline
Venue: Kolkata Main Campus, BBSR – Bhubaneswar, Odisha Extension Centre, Guw – Guwahati, Assam Extension Centre.
