Scribd
Upload
41 views2 pages

Hardware and Software Used in MCU2

This document lists the hardware and software used in an MCU2 course. The hardware includes a STM32F446RE development board, CAN transceivers, a USB logic analyzer, LEDs, resistors, jumper wires, a multimeter, and a push button. The software includes KEIL MDK v5, OpenSTM32 System workbench, and Saleae logic analyzer software. Reference links are provided for each item but are not intended as purchase links.

Uploaded by

Sai Sai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views2 pages

Hardware and Software Used in MCU2

This document lists the hardware and software used in an MCU2 course. The hardware includes a STM32F446RE development board, CAN transceivers, a USB logic analyzer, LEDs, resistors, jumper wires, a multimeter, and a push button. The software includes KEIL MDK v5, OpenSTM32 System workbench, and Saleae logic analyzer software. Reference links are provided for each item but are not intended as purchase links.

Uploaded by

Sai Sai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Hardware and software used in MCU2 course

Note: The links given in this document are NOT purchase links. They are given just as reference links
to explore the components.

HARDWARE

No Item Nos Note Reference


link

1 2 This is the main check here


STM32F446RE development
NUCLEO board for which
board drivers are
developed.
Use either one.
These boards are
explained in this
course.

2 CAN 2 For interfacing check here


Transceivers project

3 USB logic 1 In this course check here


analyzer saleae logic 8
device is used.
Please check
www.saleae.com
for more
information
about the
different
products
available from
saleae

4 LEDs 1 5mm LED check here

5 Resistors 2 22KΩ, 4.7KΩ,


470Ω ;
6 jumper wires M-M, M-F,F-F; check here

7 Multimeter 1 It should support check here


current
measurement.

8 Push button 1 Mini Pushbutton


check here

9 breadboard 1 full or medium check here


size

SOFTWARE
No Item Nos Note Reference
link

1 KEIL MDK v5 Student free and code limited FREE


version. Full installation
procedure is covered in this course
2 OpenSTM32 This IDE can be used by non- FREE
System WINDOWS users to develop and
workbench Program the board. Windows users
can also use this software.
Full installation procedure is covered
in this course
3 saleae logic This software used only if you have FREE
analyzer saleae logic analyzer hardware
software you can download this software from
here
https://www.saleae.com/downloads/
This software is used for protocol
tracing and decoding

You might also like