SANDVIK DR410i

ROTARY / DTH BLAST HOLE DRILL

TECHNICAL SPECIFICATION

Sandvik DR410i is a diesel-powered, self-propelled,

crawler-mounted blasthole drill for surface mining.
It is standard equipped for rotary with optional
down-the-hole (DTH) hammer drilling power.

HIGHER PRODUCTIVITY THROUGH INNOVATION

Sandvik DR410i uses a CAN bus controlled hydraulic
system to monitor the machine, allowing for timely
preventative maintenance while delivering higher
availability.

RUGGED DESIGN
Sandvik DR410i is equipped to drill 152 to 251
millimeter (6 to 9.875 inch) diameter blastholes
with first-pass capacity of 10 meters (33 feet) with
the standard mast or 14 meters (46 feet) with the
extended mast option.

BUILT TO LAST
Heavy-duty undercarriage designed for mining.

INNOVATION FOR SAFER OPERATION

Pipes can be handled from within the cab using
the Sandvik carousel and breakout system,
with optional Hands free bits changing capability.

OPERATOR COMFORT AND CONTROL

The ergonomically-designed cab includes controls
and touchscreen integrated into the operators seat,
angled windows to reduce glare and a safari-style
roof to keep the cab cooler.

EASIER ACCESS
An optional hydraulic main-access stairway can
be mounted to provide a parallel step onto and
off the drill.

DESIGNED WITH SAFETY IN MIND

We designed Sandvik DR410i with worldwide standards COMPRESSOR MANAGEMENT
in mind, such as Mining Design Guidelines (MDG) for Advanced compressor management reduces the
mobile and transportable equipment in mines, Earth compressor load allowing the operator to manage
Moving Equipment Safety Round Table (EMESRT) air volumes and pressures to maximize efficiency
Design Philosophies, ISO 3449 Level II and CE and reduce fuel burn reducing your CO2 footprint
conformity marking. and extending engine and compressor life
 PERFORMANCE UNDERCARRIAGE
Metric Imperial Metric Imperial
Hole diameter 152 - 251 mm 6.00 - 9.875 in. Model S31HD
First pass hole depth 10 m 33 ft. Track shoe width 750 mm 26.5 in
(Std. Mast) Track shoe type Triple grouser
First pass hole depth 14 m 46 ft. Width over tracks 3,867 mm 152.24 in
(Ext. Mast) Tram speed 2.3 / 3.4 kph 1.4 / 2.1 mph
Max. hole depth 46.6 m 153 ft.
(Std. mast)

Max. hole depth 32.3 m 106 ft.

(Ext. mast) FEED SYSTEM (Standard and Extended Mast)
Max. pull down force 222.4 kN 50,000 lbf. Metric Imperial
Weight on bit 258 kN 58,000 lbf. Feed type Twin cylinders and chain drive
Chain type Heavy-duty roller type chains
with heavy side bars and
through hardened pins

POWER GROUP Rated pull down force 222.4 kN 50,000 lbf.

Metric Imperial Feed down rate 0-25.6 m/min. 84 ft./min.
Engine options: Rated pull back force 106.8 kN 24,000 lbf.
Cummins QSK19 (Non tier 4) 563 kW 755 HP Feed up rate 0-33.5 m/min. 0-110 ft./min.
CAT C18 (Non tier 4) 521 kW 700 HP
Chain adjustment Manually adjusted pins
CAT C18 (Tier 4) 563 kW 755 HP - Standard
Auto - w/ hydraulic cylinders
- Option
Compressor options:
Rotary drilling 45.3 m³/min 1600 SCFM
@ 6.9 bar @ 100 psi

DTH drilling 41 m³/min 1450 SCFM MAST

@ 24.1 bar @ 350 psi Metric Imperial
Air pressure 24.1 bar 350 psi
Construction Designed with rectangular
structural tubing and design
Advanced Compressor Standard verified by structural FEA
management modeling and calculations

Fuel tank 1,514 lit. 400 gal. Pivot bushings Alloy steel bushings
Ambient operating range -40°C to 50°C -40°F to 122°F Mast raising cylinders 2
Angle drilling 0-30° for Standard mast
0-20° for Ext. mast
HYDRAULIC SYSTEM Hoist 17.8 kN 4,000 lbf.
Metric Imperial Mast locking 2 hydraulic actuated pins
Reservoir capacity 757 lit. 200 gal. Pipe loader 4 pod loader for Standard mast
Reservoir pressure 0.3 - 0.5 bar 5-7 psi 2 pod loader for Extended mast

FRAME AND JACKS

Metric Imperial

Main frame Designed with wide

flange beam rails, cross beams
and design verified by structural
FEA modeling and calculations

Walkways Slip resistant FRP Grating

on all maintenance areas
Leveling jacks - Standard 4
Pad diameter 762 mm 30 in.
Pad to ground clearance 560 mm 22 in.

2 SANDVIK DR410i
ROTARY HEAD DUST SUPPRESSION
Metric Imperial Metric Imperial
Rotary power 112 kW 150 HP Dry dust collector 127.5 m³/min. 4,500 CFM
Speed / torque (Std.) 8,340 N-m 6,150 ft lbs Water injection (w/ DC) 757 lit. 200 gal.
@ 130 rpm @ 130 rpm Water injection (w/o DC) 1,893 lit. 500 gal.
Speed / torque (Option) 10,250 N-m @ 7,558 ft lbs Water pump 34 lpm 9 GPM
@107 rpm @ 107 rpm Dust hood Hyd. Cylinder actuated
Speed / torque (Option) 6,780 N-m 5,000 ft lbs dust door and curtains
@ 160 rpm @ 160 rpm
Bull shaft thread 5.5” API REG.
STANDARD FEATURES
Lighting 12 LED lights
OPERATOR’S CAB Chain lubrication Operated from cab
Certification FOPS as per ISO 3449 Level II Central lubrication Automatic
Sound level 80 dB or less Thread lubrication Operated from cab

Operator's seat Fully adjustable and swiveling Cameras 2 for tramming

(180°) with adjustable height, 1 for pipe handling
lumbar support and pnuematic
suspension, shoulder type 3 Safety features Emergency Stops near all
point seat belt ladders and main elec. enclosure
Pull type cable stop on mast
Fuel fill isolator on fluid
Helper's seat Fixed; with seat belt
service center
Camera monitor Standard for tramming
Fluid service center Remote fill points for :
Defrost on front, rear and
Fuel, Hyd. Oil, Central lube,
drilling windows
Chain lube, coolant
HVAC Heat ducts to feet and air to
Remote drain points for:
operators face ambient temp.
Engine oil, Hyd. Oil, compressor
range -40°C to +50°C
oil, coolant
Cabin pressurization HEPA cabin filter with alarm Strobe lights 2 (on Mast and on Frame)
Sunshades Standard on all glasses Oil Sampling Live SOS sampling Points
AM/FM/Sirius XM radio Standard w/ bluetooth for engine, compressor,
connectivity coolant, pump drive

CONTROL SYSTEM
System CAN bus with SICA
operating platform

Safety Interlock Functional safety interlocks for

safer operation and to prevent
machine damage

OPERATOR’S CONTROLS
Location Seat mounted Left and Right
hand control panels for all drill
functions

GUI Seat mounted touch

screen and key pads

SANDVIK DR410i 3
 OPTIONS DIMENSIONS AND WEIGHT
Radio remote For Tramming and Hoist Metric Imperial
Mast access FRP infill and Lifeline on mast Length - Mast up 11.25 m 36 ft. 11 in.
Length - Mast down (Std. mast) 16.81 m 55 ft. 2 in.
Machine access ladder Self levelling hyd. cylinder Length - Mast down (Ext. mast) 20.82 m 68 ft. 4 in.
actuated ladder Height - Mast down 7.36 m 24 ft. 2 in.
Wash down Pressure water wash hose reel Height - Mast up (Std. mast) 16.61 m 54 ft. 6 in.
Hammer lube 114 lit. (30 gal.) Height - Mast up (Ext. mast) 20.62 m 67 ft. 8 in.
tank for DTH drilling Width w/ additional deck 5.74 m 18 ft. 10 in.
Cab extension deck On cab side for maintenance Width w/o additional deck 5.00 m 16 ft. 5 in.
Deck crane For bit and hammer handling Operating weight range 63.5 - 70.3 t 140,000 -
155,000 lbs

Dimensions are per engineering drawings, actuals may vary

slightly. Weights are approximate and subject to change without
notice. All performance figures are theoretical and at 100%
systems efficiency.
ARCTIC PACAKGE
Generator 25kW
Electric immersion heaters Hydraulic oil, water, chain lube,
pump drive, comprressor oil,
engine coolant, engine oil,
batteries

Insulation wrap On water pump, Receiver tank

AUTOMATION FEATURES
Standard Automine(R) Onboard TM
Auto Level
Auto mast

Navigation TIM3D GPS Navigation

Teleremote Remote operation
Options Auto drill, Auto pipe handling

4 SANDVIK DR410i
24 ft. 2 in. / 7.36 m

13 ft. 2 in. / 4.00 m

Ext. Mast: 68 ft. 4 in. / 20.82 m

Std. Mast: 55 ft. 2 in. / 16.81 m

15 ft. 4 in. / 4.674 m

36 ft. 11 in. / 11.25 m

Std. Mast: 54 ft. 6 in. / 16.61 m

Ext. Mast: 67 ft. 8 in. / 20.62 m

16 ft. 5 in. / 5.00 m

w/o additional deck

18 ft. 10 in. / 5.74 m

w/additional deck

2 ft. 5.5 in.” / 0.75 m

12 ft. 8 in. / 3.86 m

SANDVIK DR410i 5
 TS2-467:01/ENG/METRIC © Sandvik Mining 2020 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.

Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification
to users. Please contact a Sandvik representative for clarification on specifications and options.

[Link]