Scribd
Upload
168 views2 pages

HVAC Design Course Overview

This document provides an overview of the topics that will be covered in a 20-session HVAC design course. The sessions will cover fundamentals of HVAC including psychrometrics, refrigeration cycles, cooling and heating load calculation, duct design, air distribution systems, ventilation design for spaces like toilets and kitchens, and mechanical systems for applications such as tunnel ventilation and district cooling. Later sessions will focus on equipment selection and sizing of components including chillers, cooling towers, coils, VRF systems, fans, and heating systems. Hands-on drafting practice using AutoCAD will also be included.

Uploaded by

Yash vishwakarma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
168 views2 pages

HVAC Design Course Overview

This document provides an overview of the topics that will be covered in a 20-session HVAC design course. The sessions will cover fundamentals of HVAC including psychrometrics, refrigeration cycles, cooling and heating load calculation, duct design, air distribution systems, ventilation design for spaces like toilets and kitchens, and mechanical systems for applications such as tunnel ventilation and district cooling. Later sessions will focus on equipment selection and sizing of components including chillers, cooling towers, coils, VRF systems, fans, and heating systems. Hands-on drafting practice using AutoCAD will also be included.

Uploaded by

Yash vishwakarma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

HVAC Design

• Types of Heat transfer modes, Air conditioning, Forms of Heat, BTU,


Session 1&2: Introduction
to Heating ventilation and Abbreviation’s of standards, Important unit conversions,
Air conditioning, psychrometric chart and temperature properties (RH, WBT, DBT,
Psychrometric Chart: DP), psychrometric software

• Vapour compression cycle, Basic refrigeration system, refrigerants


Session 3&4: Refrigeration and their types, components of refrigeration cycle. Types of AC,
Cycle, Types of AC system:
Classifications, Package AC, VRV system

• Indoor design conditions, typical inside design conditions, outside


Session 5 & 6: Cooling and design data, Thermal resistance for materials, overall heat transfer
Heating load calculation: coefficient for components factor calculation, Heat load calculation,
HAP software

Session 7& 8: O general • O general estimation, Ducts, Air Distribution system components,
heat load calculation, Duct types of pressure, velocity in ducts, equal friction method, infiltration
Designing: rate, duct dimensioning.

Session 9&10; Air • Classification of ducts, Duct materials, Duct fittings, Plenum Designs
Terminals, Toilet duct design procedures, Fan Types. Types of Ventilation, exhaust
Ventilation: air flow calculation, static pressure calculation

• Design criteria, Types of Exhaust Fan, Exhaust Hoods, Wall type


Session 11&12: Kitchen and island type designs, Baffle filters, ESP, Kitchen Hood design
hood ventilation, Car
properties and calculation, Types of car parking ventilation, Impulse
parking ventilation:
and induction fans, calculation of fresh air rate.

• Types of tunnel ventilation, Smoke extraction management, smoke


Session 13&14: Tunnel control, pressurisation, single injection and multiple ways, properties
Ventilation, Stairwell
on closed doors, leakage rates and pressurisation calculation.
Pressurisation:
(Drafting)

• Types of chillers, TRANE catalogue for performance and sizing,


Session 15&16: Chillers/DX piping types, Valves, Pumps, Type of Heads, Chilled Water system,
system:
pump selection criteria’s, NPSH, FCUS, Heat recovery system.
HVAC Design

• Tower types and their characteristics, Example Calculations. Coils


Session 17&18: Cooling selection, selection procedures. Variable refrigerant flow,
towers, Coil selection, VRF Advantages of VRF, District cooling, Advantages, DC components,
system, District cooling: District cooling plant Equipment, example calculation for room
pressure

Session 19&20: Air • Evaporative Cooler Selection, classification, Advantages. Centrifugal


Curtains, ESP, Heating fans, CF arrangements and application, example of ESP calculation,
system: Types of Heating system, classification of Heating system

• Kitchen Hood, Toilet ducting, AHU, examples on car parking plans,


Drafting using AutoCAD:
Duct sizing in AutoCAD.

Note: After Completion of every session student should perform


Hands- On Practice.

You might also like