OWNER’S MANUAL

Safety and Reference

LED TV*
* Disclaimer
LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating

your set and retain it for future reference.

[Link]
*MFL70265919*
(3005-REV00) Copyrightⓒ2019 LG Electronics Inc. All Rights Reserved.
 India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)

ATTENTION:
This product is qualified for the BEE Star rating in the ‘Home’ Mode.
ENGLISH

The Objectives of Star Labeling Program is designed to promote energy efficient products and practices.
When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
•• Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.
•• Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated
energy consumption.
To reset the television to Star rating qualified settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under the
‘Set-up’ menu.

2
Warning! Safety Instructions •• Ventilation
-- Install your TV where there is proper ventilation. Do not install in
a confined space such as a bookcase.
-- Do not install the product on a carpet or cushion.
-- Do not block or cover the product with cloth or other materials

ENGLISH
CAUTION while unit is plugged in.
RISK OF ELECTRIC SHOCK
•• Take care not to touch the ventilation openings. When watching
DO NOT OPEN the TV for a long period, the ventilation openings may become hot.
•• Protect the power cord from physical or mechanical abuse, such as
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT being twisted, kinked, pinched, closed in a door, or walked upon.
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. Pay particular attention to plugs, wall outlets, and the point where
REFER TO QUALIFIED SERVICE PERSONNEL. the cord exits the device.
This symbol is intended to alert the user to the presence of •• Do not move the TV whilst the Power cord is plugged in.
uninsulated “dangerous voltage” within the product’s •• Do not use a damaged or loosely fitting power cord.
enclosure that may be of sufficient magnitude to constitute a risk •• Be sure do grasp the plug when unplugging the power cord. Do not
of electric shock to persons. pull on the power cord to unplug the TV.
This symbol is intended to alert the user to the presence of •• Do not connect too many devices to the same AC power outlet as
important operating and maintenance (servicing) this could result in fire or electric shock.
instructions in the literature accompanying the appliance. •• Disconnecting the Device from the Main Power
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, -- The power plug is the disconnecting device. In case of an
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. emergency, the power plug must remain readily accessible.
•• Do not let your children climb or cling onto the TV. Otherwise, the
TV may fall over, which may cause serious injury.
•• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS •• Outdoor Antenna Grounding (Can differ by country):
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. -- If an outdoor antenna is installed, follow the precautions below.
•• Do not place the TV and/or remote control in the following An outdoor antenna system should not be located in the vicinity
environments: of overhead power lines or other electric light or power circuits,
-- Keep the product away from direct sunlight. or where it can come in contact with such power lines or circuits
-- An area with high humidity such as a bathroom as death or serious injury can occur.
-- Near any heat source such as stoves and other devices that Be sure the antenna system is grounded to provide some
produce heat. protection against voltage surges and built-up static charges.
-- Near kitchen counters or humidifiers where they can easily be Section 810 of the National Electrical Code (NEC) in the U.S.A.
exposed to steam or oil. provides information with respect to proper grounding of the
-- An area exposed to rain or wind. mast and supporting structure, grounding of the lead-in wire
-- Do not expose to dripping or splashing and do not place objects to an antenna discharge unit, size of grounding conductors,
filled with liquids, such as vases, cups, etc. on or over the location of antenna discharge unit, connection to grounding
apparatus (e.g., on shelves above the unit). electrodes and requirements for the grounding electrode.
-- Near flammable objects such as gasoline or candles, or expose Antenna grounding according to the National Electrical Code,
the TV to direct air conditioning. ANSI/NFPA 70
-- Do not install in excessively dusty places.
Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.

3
 •• Grounding (Except for devices which are not grounded.) •• Batteries
-- TV with a three-prong grounded AC plug must be connected to -- Store the accessories (battery, etc.) in a safe location out of the
a three-prong grounded AC outlet. Ensure that you connect the reach of children.
earth ground wire to prevent possible electric shock. -- Do not short circuit, disassemble, or allow the batteries to
•• Never touch this apparatus or antenna during a lightning storm. overheat. Do not dispose of batteries in a fire. Batteries should
ENGLISH

You may be electrocuted. not be exposed to excessive heat.

•• Make sure the power cord is connected securely to the TV and wall •• Moving
socket if not secured damage to the Plug and socket may occur and -- When moving, make sure the product is turned off, unplugged,
in extreme cases a fire may break out. and all cables have been removed. It may take 2 or more people
•• Do not insert metallic or inflammable objects into the product. If a to carry larger TVs. Do not press or put stress on the front panel
foreign object is dropped into the product, unplug the power cord of the TV. Otherwise, this may result in product damage, fire
and contact the customer service. hazard or injury.
•• Do not touch the end of the power cord while it is plugged in. You •• Keep the packing anti-moisture material or vinyl packing out of the
may be electrocuted. reach of children.
•• If any of the following occur, unplug the product •• Do not allow an impact shock, any objects to fall into the product,
immediately and contact your local customer service. and do not drop anything onto the screen.
-- The product has been damaged. •• Do not press strongly upon the panel with a hand or a sharp
-- If water or another substance enters the product (like an AC object such as a nail, pencil, or pen, or make a scratch on it. It may
adapter, power cord, or TV). cause damage to screen.
-- If you smell smoke or other odors coming from the TV •• Cleaning
-- When lightning storms or when unused for long periods of time. -- When cleaning, unplug the power cord and wipe gently with a
Even the TV is turned off by remote control or button, AC power soft/dry cloth. Do not spray water or other liquids directly on the
source is connected to the unit if not unplugged in. TV. Do not clean your TV with chemicals including glass cleaner,
•• Do not use high voltage electrical equipment near the TV (e.g., a any type of air freshener, insecticide, lubricants, wax (car,
bug zapper). This may result in product malfunction. industrial), abrasive, thinner, benzene, alcohol etc., which can
•• Do not attempt to modify this product in any way without written damage the product and/or its panel. Otherwise, this may result
authorization from LG Electronics. Accidental fire or electric shock in electric shock or product damage.
can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to
operate this product.
•• Use only an authorized attachments / accessories approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction, or product damage.
•• Never disassemble the AC adapter or power cord. This may result in
fire or electric shock.
•• Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter.
•• To reduce the risk of fire or electrical shock, do not touch the TV
with wet hands. If the power cord prongs are wet or covered with
dust, dry the power plug completely or wipe dust off.

4
Preparing Separate Purchase

•
factory, initialization of the TV may take a few minutes.

ENGLISH
• items. These devices only work with certain models.
• The model name or design may be changed depending on the upgrade
shown in this manual. of product functions, manufacturer’s circumstances or policies.
•
or product model that you are using.
• New features may be added to this TV in the future.
Magic Remote Control
• The device must be easily accessed to a location outlet near the (Depending on model)

AN-MR19BA
• The items supplied with your product may vary depending on the Check whether your TV model supports Bluetooth in the Wireless
model.
• Remote.
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
Wall Mounting Bracket
extension cable that supports USB 2.0 if the USB cable or USB (Depending on model)
Make sure to use screws and wall mount bracket that meet the VESA
B standard. Standard dimensions for the wall mount kits are described in
B *A <
= 10 mm the following table.
A A
*B <
= 18 mm
A
• B
•
or a connection error may occur. (Recommended HDMI Cable Types)
- Ultra High-Speed HDMI®/TM cable (3 m or less)
• How to use the ferrite core (Depending on model)
- Use the ferrite core to reduce the electromagnetic interference in 32/43LM57*32/43LM56*
the power cord. Wind the power cord on the ferrite core once. Model
32/43LM63*
[Wall side ] [TV side] VESA (A x B) (mm) 200 x 200
Standard screw M6
Number of screws 4

10 cm (+ / -2 cm)

5
 Lifting and moving the TV Mounting on the Table

Please note the following advice to prevent the TV from being scratched 1 Lift and tilt the TV into its upright position on a table.
or damaged and for safe transportation regardless of its type and size. • Leave a 10 cm (minimum) space from the wall for proper
ENGLISH

• It is recommended to move the TV in the box or packing material ventilation.

that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and all 10 cm
cables. 10 cm 10 cm
• When holding the TV, the screen should face away from you to 10 cm
avoid damage.
10 cm

(Depending on model)

•
hold the transparent part, speaker, or speaker grill area.

2 Connect the power cord to a wall outlet.

• Do not apply foreign substances (oils, lubricants, etc.) to

• When transporting a large TV, there should be at least 2 people. the screw parts when assembling the product. (Doing so
• When transporting the TV by hand, hold the TV as shown in the may damage the product.)
following illustration. • If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
• Do not use any unapproved items to ensure the safety and
product life span.
• When transporting the TV, do not expose the TV to jolts or excessive • Any damage or injuries caused by using unapproved items
vibration. are not covered by the manufacturer’s warranty.
• When transporting the TV, keep the TV upright, never turn the TV • Make sure that the screws are inserted correctly and
on its side or tilt towards the left or right. fastened securely. (If they are not fastened securely
•
chassis as it may damage screen.
enough, the TV may tilt forward after being installed.)
• When handling the TV, be careful not to damage the protruding
Do not use too much force and over tighten the screws;
buttons.
otherwise screw may be damaged and not tighten
• Avoid touching the screen at all times, as this may result in
correctly.
damage to the screen.
• When attaching the stand to the TV set, place the screen
• location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided by
the screen from scratches.
taking simple precautions such as:
- Using cabinets or stands recommended by the
manufacturer of the television.
- Only using furniture that can safely support the
television.
- Ensuring the television is not overhanging the edge of
the supporting furniture.
- Not placing the television on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the television to a suitable support.
- Not standing the televisions on cloth or other materials
placed between the television and supporting furniture.
6 - Educating children about the dangers of climbing on
furniture to reach the television or its controls.
Securing TV to the Wall Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully

and install the wall mount bracket on a solid wall perpendicular to

ENGLISH
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
(Depending on model) use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
• If there are bolts inserted at the eye-bolts position, remove the

2 Mount the wall brackets with the bolts to the wall. 10 cm

Match the location of the wall bracket and the eye-bolts on the rear 10 cm
10 cm
of the TV. 10 cm
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
10 cm

• Use a platform or cabinet that is strong and large enough to

support the TV securely.
(Depending on model)
• Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
• Remove the stand before installing the TV on a wall mount
by performing the stand attachment in reverse.
• For more information of screws and wall mount bracket,
refer to the Separate purchase.
• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall

not to drop.
• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the
back of the TV.
• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.

7
 • When installing the wall mounting bracket, it is recommended to
To see web manual
dust and insects. (Depending on model)
To obtain detailed User Guide information, please visit [Link].
ENGLISH

External control device

setup
Stand hole To obtain the external control device setup information, please visit
[Link].

Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
•
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• For a location that is not supported with ULTRA HD broadcasting,
this TV cannot receive ULTRA HD broadcasts directly. (Depending
on model)
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω). (Depending on model)

Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
Connections
HDMI
• Supported HDMI Audio format:
Connect various external devices to the TV and switch input modes to (Depending on model)
select an external device. For more information of external device’s DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz),
connection, refer to the manual provided with each device. DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

USB
Some USB Hubs may not work. If a USB device connected using a USB
Hub is not detected, connect it to the USB port on the TV directly.

8
External Devices
Using Button
Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices. You can simply operate the TV functions, using the button.

ENGLISH
•• The external device connection may differ from the model.
•• Connect external devices to the TV regardless of the order of the
TV port.
•• If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
•• Refer to the external equipment’s manual for operating
instructions.
•• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
•• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to Basic functions
another rate or adjust the brightness and contrast on the [PICTURE]
menu until the picture is clear. Power On (Press)
•• In PC mode, some resolution settings may not work properly Power Off 1 (Press and Hold)
depending on the graphics card. Menu Control (Press 2)
•• When connecting via a wired LAN, it is recommended to use a CAT Menu Selection (Press and Hold 3)
7 cable. (Only when port is provided.) 1 All running apps will close, and any recording in progress will stop.
•• For LM series, HDR (High Dynamic Range) pictures can be viewed 2 You can access and adjust the menu by pressing the button when
over the Internet or via USB and HDMI 1.4 compatible devices. TV is on.
3 You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust
the Menu items using the button.
Turns the power off.
Changes the input source.

Adjusts the volume level.

Scrolls through the saved programmes.

9
 Using Remote Control ** To use the button, press and hold for more than 1 second.
(POWER) Turns the TV on or off.
Selects Radio, TV and DTV programme.
(Depending on model) , (SEARCH) Search for content such as TV programmes,
movies and other videos, or perform a web search by entering text in
ENGLISH

The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly. the search bar. (Depending on model)
Recalls your preferred subtitle in digital mode.
To replace batteries, open the battery cover, replace batteries
(Q. Settings) Accesses the Quick Settings.
(1.5 V AAA) matching the and ends to the label inside the
(INPUT) Changes the input source.
compartment, and close the battery cover. To remove the batteries, Number buttons Enters numbers.
perform the installation actions in reverse. **
Accesses the [QUICK HELP].
Make sure to point the remote control toward the remote control sensor Accesses the saved programmes list.
on the TV. , (MORE ACTIONS) Displays more remote control
functions. (Depending on model)
**
, **
Edits QUICK ACCESS. (Depending
on model)
-- QUICK ACCESS is a feature that allows you to enter a specified
app or Live TV directly by pressing and holding the number
buttons.
Adjusts the volume level.
, Audio descriptions function will be enabled. (Depending
on model)
Accesses your favourite programme list.
Shows programme guide.
(MUTE) Mutes all sounds.
**
(MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved programmes.
1, 1 Streaming Service buttons Connects to the Video
1 1 Streaming Service. (Depending on model)
(HOME) Accesses Home menu.
**
(HOME) Shows the previous history.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
1 1 (OK) Selects menus or options and confirms your input.
Teletext buttons ( ) These buttons are used for
teletext.
Accesses the Quick menus. (Depending on model)
, Starts to record and displays record menu. (Only Time
MachineReady supported model) (Depending on model)
, , , , (Control buttons) Controls media contents.
, , , These access special functions in some menus.
(Some buttons and services may not be provided depending on models **
Enter Cheering mode.
or regions.)

10
Using Magic Remote Control ** To use the button, press and hold for more than 1 second.
(POWER) Turns the TV on or off.
(STB POWER) You can turn your set-top box on or off by adding
(Depending on model) the set-top box to the universal remote control for your TV.

ENGLISH
The descriptions in this manual are based on the buttons on the remote Number buttons Enters numbers.
control. Please read this manual carefully and use the TV correctly. **
Accesses the [QUICK HELP].
When the message [Magic Remote battery is low. Please change the (DASH) Inserts a between numbers such as 2-1 and 2-2.
battery.] is displayed, replace the battery. Accesses the saved programmes list.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
**
Edits QUICK ACCESS.
matching the and ends to the label inside the compartment, -- QUICK ACCESS is a feature that allows you to enter a specified app
and close the battery cover. Be sure to point the magic remote toward or Live TV directly by pressing and holding the number buttons.
the remote control sensor on the TV. To remove the batteries, perform (MORE ACTIONS) Displays more remote control functions.
the installation actions in reverse. **
Video/audio descriptions function will be enabled.
Adjusts the volume level.
(MUTE) Mutes all sounds.
**
(MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved programmes.
**
(Voice recognition) Network connection is required to use the
voice recognition function. Once the voice display bar is activated on
the TV screen, press and hold the button and speak your command
out loud.
(HOME) Accesses the Home menu.
**
(HOME) Shows the previous history.
(Q. Settings) Accesses the Quick Settings
**
(Q. Settings) Displays the [All Settings] menu.
Wheel (OK) Press the center of the button to select a menu.
You can change programmes by using the button.
(up/down/left/right) Press the up, down, left or right
button to scroll the menu. If you press buttons while the
pointer is in use, the pointer will disappear from the screen and Magic
Remote will operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the left and right.
(BACK) Returns to the previous level.
**
(BACK) Clears on-screen displays and returns to last input
1 1 viewing.
Shows programme guide.
1 Streaming Service buttons Connects to the Video Streaming
1 1
Service.
Shows the previous history.

(Some buttons and services may not be provided depending on models

or regions.)

11
 (INPUT) Changes the input source.
**
(INPUT) Accesses the [HOME DASHBOARD].
Displays the set-top box Home menu.
- When you are not watching via a set-top box: the display changes
to the set-top box screen.
ENGLISH

, , , These access special functions in some menus.

**
Runs the record function.
**
Enter Cheering mode.
, (Control buttons) Controls media contents.

Registering Magic Remote Control

How to register the Magic Remote Control

1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK) on
the remote control.
* If the TV fails to register the Magic Remote, try again after turning
the TV off and back on.
How to deregister the Magic Remote Control
Press the (BACK) and (HOME) buttons at the same time, for

* Pressing and holding the button will let you cancel and re-reg-
User Guide
ister Magic Remote at once.
For more information about this TV, read the USER GUIDE embedded in
• Do not mix new batteries with old batteries. This may the product. (Depending on model)
cause the batteries to overheat and leak. • To open the USER GUIDE ( ) [General] [About
• Failure to match the correct polarities of the battery This TV] [User Guide]

personal injury, or ambient pollution.

• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or (Australia region only)
recycling information.
• Batteries inside or inside the product shall not be exposed

• In Analogue TV and some countries, some remote control Freeview Plus provides access to content and services from the
buttons may not work. Freeview networks. The Freeview Plus service provides a 7 + day
EPG, all available Catch Up TV, recommendations and the ability
to set reminders and favourites. Freeview Plus is available by
pressing the green button on the remote.
*Freeview Plus uses HbbTV technology which combines broadcast
and broadband. It requires an internet connection. Normal data
usage charges and conditions apply.

12
Troubleshooting Generated Sound
•• “Cracking” noise: A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due
Cannot control the TV with the remote control. to temperature and humidity. This noise is common for products
where thermal deformation is required.

ENGLISH
•• Check the remote control sensor on the product and try again.
•• Check if there is any obstacle between the product and the remote •• Electrical circuit humming/panel buzzing: A low level noise is
control. generated from a high-speed switching circuit, which supplies a
•• Check if the batteries are still working and properly installed ( large amount of current to operate a product. It varies depending
to , to ). on the product.
No image display and no sound is produced. This generated sound does not affect the performance and
reliability of the product.
•• Check if the product is turned on.
•• Check if the power cord is connected to a wall outlet.
•• Check if there is a problem in the wall outlet by •• When cleaning the product, be careful not to allow any
•• connecting other products. liquid or foreign objects to enter the gap between the
The TV turns off suddenly. upper, left or right side of the panel and the guide panel.
(Depending on model)
•• Check the power control settings. The power supply may be
interrupted.
•• Check if the auto-off function is activated on the settings related
time.
•• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity. •• Make sure to wring any excess water or cleaner from the
When connecting to the PC (HDMI), no signal is detected. cloth.
•• Turn the TV off/on using the remote control. •• Do not spray water or cleaner directly onto the TV screen.
•• Reconnect the HDMI cable. •• Make sure to spray just enough of water or cleaner onto a
•• Restart the PC with the TV on. dry cloth to wipe the screen.

Abnormal Display
•• If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
•• This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a
malfunction and does not affect the performance and reliability of
the product. This phenomenon also occurs in third-party products
and is not subject to exchange or refund.
•• You may find different brightness and colour of the panel
depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel.
It is not related with the product performance, and it is not
malfunction.
•• Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a fixed image on the TV screen for
a long period of time.

13
 (Depending on country)
ENGLISH

Broadcasting S cations

Digital TV Analogue TV
(Depending on country) (Depending on country)
PAL B/B, PAL B/G, PAL D/K, PAL-I
DVB-T/T21
Television system SECAM B/G, SECAM D/K
DVB-T/T2/C/S/S22
NTSC-M
VHF, UHF
Programme coverage VHF, UHF, CATV
C-Band2, Ku-Band2
Maximum number of storable DVB-T/T2 & Analogue TV :
programmes DVB-S/S2 :
External antenna impedance 75 Ω
1 Only DVB-T2 support models. (Despite DVB-T2 model, DVB-T/T2 function does not apply in Philippines.)
2 Only DVB-T2/C/S2 support models.
3 Depending on model.

(Only 32LM63*V*,LM56*)
Wireless module (LGSWFAC81) S cations
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz 18.5 dBm
5,150 to 5,725 MHz 20.5 dBm
5,725 to 5,850 MHz (Not for EU) 12 dBm

frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
* IEEE 802.11ac is not available in all countries.

14
(Except for 32LM63*V*,LM56*)
Wireless module (LGSBWAC92) specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range Output Power (Max.)

ENGLISH
2,400 to 2,483.5 MHz 18 dBm
5,150 to 5,725 MHz 18 dBm
5,725 to 5,850 MHz (Not for EU) 12 dBm
Bluetooth
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz 8 dBm

frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
* IEEE 802.11ac is not available in all countries.

(Australia and New Zealand region only)

The use of the 5,150 – 5,350 MHz band is restricted to indoor use only. This restriction exists in the countries Australia (AU) and New Zealand (NZ).
(For Wi-Fi/Bluetooth built-in model or Wi-Fi built-in model)
“RF Radiation Exposure Statement

Environment condition
Operating Temperature 0 °C to 40 °C
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C
Storage Humidity Less than 85 %

• The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country)
- The Energy consumption is measured in accordance with IEC 62087.
• Actual Energy consumption may vary depending on factors such as the type of video content being played and TV settings.

15
 Open Source Software Regulatory
Notice Information
WARNING!
ENGLISH

To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit Never place a television set in an unstable location. A television set may
[Link] fall, causing serious personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple precautions such as:
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download. • Using cabinets or stands recommended by the manufacturer of the
television set.
LG Electronics will also provide open source code to you on CD-ROM
• Only using furniture that can safely support the television set.
for a charge covering the cost of performing such distribution (such
• Ensuring the television set is not overhanging the edge of the
as the cost of media, shipping, and handling) upon email request to
supporting furniture.
opensource@[Link].
• Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture and
the television set to a suitable support.
• Not placing the television set on cloth or other materials that may
be located between the television set and supporting furniture.
Licenses • Educating children about the dangers of climbing on furniture to
reach the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

(Magic Remote supported models only)
Refers to class II equipment.

Refers to stand-by.

Refer to “ON” (power).

Refers to dangerous voltage.

16
 Environmental Information
(Only India)

Disposal of your old appliance (as per e-waste Rules)

ENGLISH
1. When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is
covered by the e-waste Management and Handling Rules, 2011 and are meant to be recycled, dismantled, refurbished or
disposed off.
2. Do’s:
a. The product is required to be handed over only to the authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/unrepairable so as to prevent its accidental breakage.
Don’t:
a. The product should not be opened by the user himself/herself, but only by authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.

entence
LGE Internald. Use Only
Do not keep any replaced spare part(s) from the product in exposed area.
3. Any disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.
4. “This product is complied with the requirement of Hazardous Substances as specified under Rule 13 (1) & (2) of the E-Waste (Management &
Handling) Rules, 2011.”
_ Provided5. Tsentence
oLGE
locate a Internal Usecentre
nearest collection Onlyor call for pick-up (limited area only) for disposal of this appliance, please contact Toll Free No. 1800-315-
9999 / 1800-180-9999 for details. All collection centre and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd.
Merely as a facilitator. For more detailed information, please visit: [Link]

( ( -- )
)

. -
“
,
17
 18
ENGLISH
ENGLISH

19
The model and serial number of the product are located
on the back and on one side of the product.
Record them below in case you ever need service.

Model

Serial No.