Scribd
Upload
69 views1 page

Silber B Watch & Instrument Oil Specs

This document provides specifications for Silber B, a synthetic watch and instrument oil based on esters with hydrocarbons. It has a viscosity of 240 mm2/s at 0°C and 70 mm2/s at 20°C, giving it a viscosity index of 150. Tribological tests show it has low friction coefficients between 0.01-0.15 depending on sliding speed. Wear tests show it reduces wear on steel/brass and steel/steel bearings compared to dry conditions. It is recommended for lubricating highly loaded, low or high-speed metal and jewel bearings up to pocket watch calibers.

Uploaded by

statisticssales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

Silber B Watch & Instrument Oil Specs

This document provides specifications for Silber B, a synthetic watch and instrument oil based on esters with hydrocarbons. It has a viscosity of 240 mm2/s at 0°C and 70 mm2/s at 20°C, giving it a viscosity index of 150. Tribological tests show it has low friction coefficients between 0.01-0.15 depending on sliding speed. Wear tests show it reduces wear on steel/brass and steel/steel bearings compared to dry conditions. It is recommended for lubricating highly loaded, low or high-speed metal and jewel bearings up to pocket watch calibers.

Uploaded by

statisticssales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Silber B

Article No. TK2300


Watch and Instrument Oil
Product Specifications
Product
Laboratory Data: Tribological Data:
Test System: sphere on prism (ISO 7148/2)
Viscosity
Stabinger friction moment M
Temperature ν (mm²/s)
(ASTM D7042)
1/2" sphere
0 °C [32 °F] 240
prism Bearing material
20 °C [68 °F] 70
40 °C [104 °F] 30
normal load FN
Viscosity-Index (ISO) 150

Friction Behaviour
Viscosity-Temperature-Behaviour good dependent on sliding speed Application
temperature
v (mm/s) f friction coefficient f
0.1 0.2 0.3 0.4
Color slightly yellow, clear
0 0.15
Permanent Low Temperature -30 °C 20 0.14
72 hrs fluid [-22 °F]
50 0.02
Application Temperature -25 °C to +80 °C 200 0.01
[-13 °F to +176 °F]
materials: steel/brass, load 3 N, 25 °C [77 °F]
Density 20 °C [68 °F] (DIN) 0.95 g/cm³ lubricant: Silber B Bearing load
Surface Tension 31 mN/m
Evaporation Rate 0.1 %
24 hrs/105 °C [221 °F] very low Wear Behaviour
comparison: dry and lubricated with Silber B

Drop Stability good materials wear (in mm)


0.01 0.03 0.1 0.3 1.0
Durability good St/brass: TK2300
Corrosion Resistance brass: very good dry Sliding speed
steel: very good St/steel: TK2300
Composition synthetic oil on dry
ester base with
hydrocarbons test parameters: load 30 N, distance 10 km,
25 °C [77 °F], v=28.1 mm/s

Durability

Comments: Application:
Silber B is a synthetic watch and instrument oil based Lubrication of highly loaded, low or high-speed
on esters and with a small amount of synthetic metal and jewel bearings up to pocket-watch calibers.
hydrocarbons. Its excellent pressure absorption Viscosity
capacity and the high surface tension ensure for-life
lubrication of highly loaded sliding bearings. Suitable
for high and low velocities. Low inner friction due to
low viscosity. Compatibility tests are necessary if used
with plastics!

Wetting

P035e
Dr. Tillwich GmbH Werner Stehr Phone: +49 (0) 7451 5386-0 All information reflects our best knowledge. No responsibility is Certified
Murber Steige 26 Telefax: +49 (0) 7451 5386-70 taken for printed data. Technical and chemical changes may occur acc. to
D-72160 Horb (Ahldorf) info@[Link] without notice. We cannot be held liable for any use or application. ISO 9001

You might also like