1,,=
L,ll E
A-MET
HIG H. TEC H C OII,IPA N Y PW: LID,
SPECIFICATIONS
pMC FLAWCHECK LTQUID PENETRANT PP- 1 lolPP-l I 0B
1) Visibility : Type ll-Visible Liquid Penetrant
2) Washability : Method C-Solvent removable
3) Sensitivity Level : Level 3 (High)
Depth : 20 tnicrons
Width : 1 micron
On Nickel Chrome Plated Standard Test Panel
4) Density at 25o C g/m1 0.84 to 0.88
s) Viscosity at25n C cp 3.0 to 4.5
6'1 Meniscus spot diameter, mm Less than or equal to 3.5 mm
1) In most cases approximate Above 95%o
crack detection efficiency on
1X20 microns Ni-Cr 'I'est Panel
8) Ionic halides measured in terms Less than 25 PPM
of chlorides, PPM
9) Ionic sulphate contents, PPM Less fhan 25 PPM
10) o
Flash point C Above 52o C
(Abel's ciosed cup)
11) Toxicity Non Toxic
12) Corrosiveness Non corrosive
13) Shelf life Around 2.5 years
Expiry date is printed on
labels alongwith batch
number
a/
REGD. OFFICE:
1-5/6, INDUSTRIAL ESTATE, GORWA, VADODARA.39O 016, GUJARAT, INDIA.
An ISO 9001 - Afr@ PH. . 2282326,2281125 FAX : (0265) 2282937 e-mail : mehtapmet@[Link]
CERTIFIED COMPANY Website : [Link] CIN : U241 1 OGJ1 996PTC029407
1,,=
l,ll g#
[Link]
[Link] COIIPAI,IY PW: LTO,
::2::
14) Penetrants Quality :
Wettability :Readily wets
Bead Formations : Does not form bead even after 10 minutes
Removability : Easily removable even after flour hours of dwell
time and there is no residuai penetrant existence
on test surface which may interfere with crack detection
Aerosol Containers :
a) We are indicating the net weight (minimum) and volume (approximate) of
material on label for each batch of material.
b) Tested flor valve leakage as per standard test procedure and properly
packed before dispatch
Packing:
PP-1 10 is available in litre packing tin container
PP-110B is available in aerosol cans with non-ozone depleting
hydrocarbon gas as propellant
for P-MET HI COMPANY PVT. LTD.
Yo)
Note : SpecificatioFmentioned above are subject to undergo changes
(t2tr6)
REGD- OFFICE:
1-5/6, INDUSTRIAL ESTATE, GORWA, VADODARA - 3gO 016, GUJARAT, INDIA.
An ISO 9001 - A@ PH. : 2282326, 2281125 FAX.; (0265) 2282937 e-mail : mehtapmet@[Link]
CERTIFIED COMPANY Website : [Link] CiN : U241 1OGJ1996PTC029407
I50 ?001 : 2015 't
1,,=
L,ll PB
[Link]
fi
H il. TECfl C OIIPA II Y PTT LfO,
PMCFLAWCIIECKCLEAhIERPC.120/PC.1208
1) Solvent Removers Class - 2 Non Halogenated l{emover
2) Density at25o C g/m1 036 to 0.79
3) Viscosity at25o C aP 0.3 to 0,4
4) Drying time, seconds Below 40 Sec. between
25" C to 350 C
s) Ionic halides measured in terms Less than 25 PPM
of chlorides, PPM
Ionic sulPhate contents, PPM I-ess than 25 PPM
6) o
7)
o
F-lash point C Below 15 C
(Abel's closed cuP)
8) Toxicity Non Toxic
e) Corrosiveness Non corrosive
and its alloys
11) Shelf life Around 2.5 Years
Expiry date is Printed on
labels alongwith batch
number
Aerosol Containers :
of
a) we are indicating the net weight (minimum) and volume (approximate)
material on label for each batch of material'
b) 'Iested for valve leakage as per standard test procedure and properly
packed before disPatch
Packing :
PC-l20isavailableinlitrepackingtincontainer
.pC-120B is available in aerosol can with non-ozone depleting hydrocarbon
gas as ProPeliant
for P-MET HIGH- ANY PVT. LTD.
o. Vfanager
Note : Specifications [Link] to undergo changes withoutt
any prior
(12lr6)
M
REGD. OFFICE :
r_ilo, trrrousrRtAL ESTATE, cORWA, VADODARA - 390 016, cUJARAT, lNDlA.
An ISO 9001 - @ PH.:2282326,2281125FAX:(0265)[Link]:mehtapmet@[Link]
CERTIFIED COMPANY Website:www'[Link]:U24110GJ1996PTC029407
p
tS# 9S*-L : 2S15
'r
.I
1,,=
L,ll EE
[Link]
HIOH- fEC H C 1l,lPA l,l Y PW LfD.
SPECIFICATIONS
I'MC FLAWCHECK DEVELOI'EII PD- 13 O/PD- 13OB
1) Form Forrn-d (Non-aqueous Developer)
2) Drying titne, seconds Belffi 26 seconds between 25o C to 35o
3) Settling time Settling Settling
Volume ml Period seconds
5 40
10 70
15 100
20 200
25 400
26
4) Ionic halides measured in terms Less than 25 PPM
of chlorides, PPM
5) Ionic sulphate contents, PPM Less than 25 PPM
6) Toxicity Non Toxic
7) Corrosiveness Non corrosive
8) Shelf life Around 2.5 years
Expiry date is printed on
labels alongwith batch
number
e) Contrasts Gives high colour contrast with
white background
10) Mixibility Readily mixed on stir:ring / shaking
..2t-
REGD. OFFICE:
1.5/6, INDUSTRIAL ESTATE, GORWA, VADODARA - 390 016, GUJARAT, INDIA.
An ISO 9001 - gXB PH. : 2282326,2281125 FAX : (0265) 2282937 e-mail : mehtapmet@[Link]
CERTIFIED COMPANY Website : [Link] CIN : U241 1 0GJ1 996PTC029407
.,
ISO 9001 :
2015
1,,=
L,ll ffi
HIOH. TECH COTIPANY PW LTD,
::2::
Aerosol Containers :
a) We are indicating the net weight (minimum) and volume (approximate) of
material on label for each batoh of material.
b) Tested for valve leakage as per standard test procedure and properly packed
before dispatch
Packing:
PD- 130 is available in litre packing tin container
PD-130B is available in aerosol can with non-ozone depleting hydrocarbon
gas as propellant
for P-MET HIGH-TECH COMPANY PVT. LTD.
mentioned above are subject to undergo changes
(12n6)
REGD. OFFICE:
1-5/6, INDUSTRIAL ESTATE, GORWA, VADODABA.39O 016, GUJARAT, INDIA.
An ISO 9001 - @ PH. : 2282326, 2281125 FAX.: (0265) 2282937 e-mail : mehtapmet@gmail"com
CERTIFIED COMPANY Website : [Link] CIN : U241 1OGJ1 996PTC029407
T5ffi Bt]0i : trii F
