TRUMPF
TruLaser 5030 Fiber
2D laser cutting machine
LINK to the machine
Manufacturer TRUMPF
Model TruLaser 5030 Fiber
Manufacture year 2015
Control SIEMENS SINUMERIK 840 D
Machine number A2231E0149
TruDisk 5001 approx. 11.500 Laser-on hours
KISTNER GmbH & Co. KG | Industriestraße 7 95349 Thurnau | +49 92289870 | [Link]
TECHNICAL DATA
Working area
X- / Y-axis 3.000 x 1.500 mm
Z-axis 115 mm
Control SIEMENS SINUMERIK 840 D
Main PC memory 2 GB
Hard disk 2 x 160 GB
Colour monitor with touch screen 19‘‘
Screen resolution 1.280 x 1.024 Pixel
USB-connection yes
Ambient temperature
Permissible ambient temperature +10 to 35 °C
Dimensions and weight
Length x Width x Height, approx. 8.300 x 4.800 x 2.400 mm
Weight, approx. 12.000 kg
Material thickness, max.
Mild steel O2 25 mm
Stainless steel N2 25 mm
Aluminium N2 25 mm
Copper 02 10 mm
Copper N2 3 mm
Brass N2 10 mm
2 - TRUMPF TruLaser 5030 Fiber
EQUIPMENT
Machine
- Closed machine frames
- Torque drive in combination with linear direct drives
- Closed beam guidance by laser light cable (LLK)
- Cooling device
- Machine cooling unit (water-air)
- Integrated control cabinets with interior lighting
- Integrated cabinet
- Automatic pallet changer in longitudinal direction
- 19‘‘ Touch colour screen
- Conveyor
- Power supply TruDisk via the machine
- Work area lighting
- Positioning laser diode
- Spraying device
- Pierce Line / FocusLine / NitroLine / PlasmaLine
- Automatic noozle cleaning
TRUMPF Laser
- Solid state laser TruDisk 5001 with a laser light cable outflow (includes BrightLine fiber)
- Optical cable according to standard layout
- Laser cooling device (water-air)
- Stimulation via pump diodes
- Laser power control
Cutting head
- Universal cutting unit with fully adaptive lens system
- Incision head strategy
- Protective glass against lens contamination
3 - TRUMPF TruLaser 5030 Fiber
- Condition check of the protective glass
- ControlLine: Height control and sheet outer edge detection
Control
- SIEMENS SINUMERIK 840 D
- Simple workshop programming
- TruTops Laser via network access
- Fast re-production
- Integrated TRUMPF technology data
- Automatic switch off
- Programmable cutting gas / pressure selection
- ContourLine / FastLine / Microweld / AdjustLine
Data transfer
- USB-connection
- RJ-45 network connection
- Wireless Operation Point (Basis for Visual Online Support)
Safety
- CE marking
- Phot sensors
- Multi chamber extraction system
- Compact dust collection system
- Machine cover, certified visor, right door
- Electrical folding top
Additional equipment
- Smart Noozle Automation (Nozzle changer, autom. nozzle inspection and Smart Skip)
- Copper cutting package
- Brass cutting package
- CoolLine
4 - TRUMPF TruLaser 5030 Fiber
- Wide cross conveyor with tipping container
- Machine status light (including MDE interface)
- 2 integrated cameras for process monitoring and single image transmission in the network
- Drop & Cut
- Dot Matrix Code (Parts identification)
- CO2 extinguishing system for compact dust extractors
User manual / Documentation
Machine parameters
5 - TRUMPF TruLaser 5030 Fiber
TruDisk Laser
Generation of the laser beam
The laser-active medium is a thin
crystal disk of Yb: YAG (ytterbium-
doped yttrium aluminum garnet).
The disk laser is pumped with the
help of diode lasers. The laser beam
is created in the crystal disk and
leaves the cavity through a hole in
the middle of the parabolic mirror.
Solid-state laser
Thanks to its diode-pumped
excitation, the TruDisk can be used
both in pulse mode and in cw mode.
Advantages of the solid-state laser:
■ Very good beam shape due to
small opening angle with small
beam waist.
■ High degree of efficiency.
TRUMPF LaserNetwork (TLN)
The laser can be equipped with several outlets. With this it is possible to set up a
Laser Network, where several machines are supplied by a laser source. The utilization
and efficiency of the beam source can be significantly increased by the network.
Advantages
■ High beam quality
■ No laser gases necessary
■ Beam guidance through a laser light cable
■ Low energy consumption
■ Wear free
■ Maintenance-free
■ Network-compatible: The laser can optionally be equipped with another beam outlet
and can accordingly supply several systems.
6 - TRUMPF TruLaser 5030 Fiber Source: free translation from TRUMPF user manual
MACHINE PICTURES
7 - TRUMPF TruLaser 5030 Fiber
8 - TRUMPF TruLaser 5030 Fiber
Thank you very much for your interest
LINK
to the machine
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any
characteristics and qualities. The named machine, which is up for sale, is used.*
KISTNER GmbH & Co. KG | Industriestrasse 7 95349 Thurnau | +49 92289870 | [Link]
