1 2 3 4 5 6 7 8 9 10

INDEX
MAIN POWER SUPPLY
INSTALLED OPTIONAL COMPONENT A
SHEET DESCRIPTION
Electronic water drains side 1,2 VOLTAGE : ........... V
1 INDEX B1,B2 : DD Filter
B3,B4 : WSD FREQ : 50 Hz 1 PH
2 SUPPLY CONTROL CIRCUIT
SIDE A DD/PD Filter kit side 1,2
3 SUPPLY CONTROL CIRCUIT PDS11,13 : Delta P-switch for integrated DD filter
SIDE B PDS12,14 : Delta P-switch for integarted PD filter VOLTAGE : ........... V
4 ELEKTRONIKON GRAPHIC CO : Carbon monoxide transmitter

5 EXPANSION MODULE IO2

CO2 : Carbon dioxide transmitter FREQ : 60 Hz 1 PH B

6 INPUT CONNECTIONS 3X33

MAX FUSE
7 INPUT CONNECTIONS 3X34
IEC : Class gL/gG
8 CUSTOMER ALARM
CONNECTIONS ....... A
9 DIN RAIL CONTROLLER 1
C
10 CONTROL CIRCUIT SIDE A
SOLENOIDS
11 INPUT CONNECTIONS DIN
RAIL CONTROLLER 5X27-1 F1-F2 F3-F4
12 DIN RAIL CONTROLLER 2
____ A ____ A
13 CONTROL CIRCUIT SIDE B

14
SOLENOIDS
INPUT CONNECTIONS DIN
F5 - F6 F7 & F8
RAIL CONTROLLER 5X27-2 D
15 LEGEND ____ A ____ A
3
16 NOTES F9 - F14 F15 - F16
____ A ____ A

F17 - F18
E
____ A
NOTE; FUSES TO BE OF TYPE
T CHARACTERISTIC UNLESS
STATED OTHERWISE

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 01 OF 16
FP

4.0 Various Update drawng references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

CUSTOMER'S INSTALLATION A
115 / 230VAC 2 [K]
L
N
PE

[K]
B

[F]

115 / 230V AC

24V AC
C

[F]

[F] Note: Tx LINKS FOR 115 / 230V

SEE DIAGRAM SHEET 16

2 [K]

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. Replaces ACM G
Version Drwg
B

1 Designation Sheet 02 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

CUSTOMER'S INSTALLATION A
115 / 230VAC
L
N
PE

[F]

115 / 230V AC

24V AC
C

[F]
3

[F] Note: Tx LINKS FOR 115 / 230V

SEE DIAGRAM SHEET 16

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. Replaces ACM G
Version Drwg
B

1 Designation Sheet 03 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

Act
LNK

[H] Note: CAN connector 3 of WH 1627-0166-00 need to be connected to CAN2

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 04 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

[J] [J] OPTION A

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED duplex Controller Service Diagram Secrecy Class

[J] OPTION - service diagram 2212 0216 12 Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 05 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

DELTA P PD & DD FILTER

DELTA P PD & DD FILTER

RESERVE MANIFOLD

RESERVE CYLINDER

EWD FAULT SIDE 2

EWD FAULT SIDE 1

PRESSURESWITCH

SIDE2OPTION

SIDE1OPTION

DI-OUT

DI-OUT
OPTION

OPTION
GND

GND

DI02

DI01

DI04

DI03

DI06

DI05

DI08

DI07

DI10

DI09

DI12

DI11

DI14

DI13

DI16

DI15
B

[L]

[G] [K] [K] [L]

D

F
copied, used for manufacturing or communicated to any other person or company.

[G] Remove wire when installing a reserve manifold pressure switch as input.
This document is our property and shall not without our permission be altered,

[K] Remove wires when installing EWD option as input (Harness 2212 0216 18).
[L] Remove wires when installing Filter option as input (Harness 2212 0216 30).
Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 06 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

E2 Expansion module IO2

A

AI-OUT (V+)
GND

GND

GND

GND

GND

GND
AI01
P01

P02

P03

P04

P05
V+

V+

V+

V+

V+
B

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 07 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

CONNECTION TO MEDICAL ALARM POTENTIAL FREE CONTACTS

SYSTEM BUILDING MANAGEMENT SYSTEM

Customer Customer Customer Customer Customer Customer Customer

Customer connection Customer connection Customer connection Customer connection Connection Connection Connection Connection Connection Connection Connection B

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 08 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

[B]

F
copied, used for manufacturing or communicated to any other person or company.

[B] Note: CAN connector 4 of WH 1627 0166 00 need to be connected to CAN2

This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controler Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 09 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

DRYER 1
INLET DRYER 1 DRYER 1
SOLENOID REGENERATION VALVE A REGENERATION VALVE B

CABLES PART OF
IEC MULTINORM SET
Drg NO: 2212 0214 96
4 4

[I] [I] [I]

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

4 Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 10 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

DRYERPRESSURESWITCH
B

SUPPLY

SUPPLY
DI-OUT

DIO2

DIO1

DIO4
GND

GND

GND

GND

DI03
P01
T01

T02

T03

V+
C

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 11 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

[B]

F
copied, used for manufacturing or communicated to any other person or company.

[B] Note: CAN connector 2 of WH 1627 0166 00 need to be connected to CAN2

This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 12 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

DRYER 2
INLET DRYER 2 DRYER 2
SOLENOID REGENERATION VALVE A REGENERATION VALVE B

CABLES PART OF
IEC MULTINORM SET
Drg NO: 2212 0214 97

[I] [I] [I]

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 13 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

DRYERPRESSURESWITCH
B

SUPPLY

SUPPLY
DI-OUT

DIO2

DIO1

DIO4
GND

GND

GND

GND

DI03
P01
T01

T02

T03

V+
C

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 14 OF 16
FP

4.0 Various Update drawing references (IAR9925) 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

LEGEND LEGEND
LOCATION TAGNAME SHEE DESCRIPTION FUNCTION LOCATION TAGNAME SHEE DESCRIPTION FUNCTION
T T A
CANOPY PDP01 7 DEWPOINT TRANSMITTER CONTROL PANEL F1 2 FUSE TRANSFORMER 1 PROTECTION

CANOPY PT01 7 VESSEL PRESSURE TRANSDUCER CONTROL PANEL F2 2 FUSE TRANSFORMER 1 PROTECTION

CANOPY PT02 7 LINE PRESSURE TRANSDUCER CONTROL PANEL F3 2 FUSES 24VAC CIRCUIT

CANOPY Y1 10 DRYER 1 INLET SOLENOID VALVE DRYER 1 CONTROL PANEL F4 2 FUSE 24VAC CIRCUIT

CANOPY Y2 4 10 DRYER 1 SIDE A REGENERATION VALVE DRYER 1 CONTROL PANEL F5 3 FUSE TRANSFORMER 2 PROTECTION

CONTROL PANEL F6 3 FUSE TRANSFORMER 2 PROTECTION

CANOPY Y3 4 10 DRYER 1 SIDE B REGENERATION VALVE DRYER 1 B
CONTROL PANEL F7 3 FUSE 24VAC CIRCUIT

CANOPY Y4 13 DRYER 2 INLET SOLENOID VALVE DRYER 2 CONTROL PANEL F8 3 FUSE 24VAC CIRCUIT

CANOPY Y5 13 DRYER 2 SIDE A REGENERATION VALVE DRYER 2 CONTROL PANEL F9 10 FUSE SOLENOID Y1

CONTROL PANEL F10 10 FUSE SOLENOID Y2A

CANOPY Y6 13 DRYER 2 SIDE B REGENERATION VALVE DRYER 2
CONTROL PANEL F11 10 FUSE SOLENOID Y3A

CONTROL PANEL E1 4 REGULATOR ELEKTRINOIKON GRAPHIC PLUS CONTROL PANEL F12 10 FUSE SOLENOID Y4

CONTROL PANEL 2X20 4 CAN2 CONTROL PANEL F13 13 FUSE SOLENOID Y5 C

CONTROL PANEL 2X21 4 CAN1 CONTROL PANEL F14 13 FUSE SOLENOID Y6

CONTROL PANEL 2X22 4 RS485 CONTROL PANEL F15 2 FUSE OTIONS PSU

CONTROL PANEL 2X24 4 CONNECTOR CONTROL PANEL F16 2 FUSE OPTIONS PSU

CONTROL PANEL 2X25 4 ETHERNET CONTROL PANEL F17 2 FUSE OPTIONS IO EXPANSION - IO34

CONTROL PANEL 2X27 4 CONNECTOR CONTROL PANEL F18 2 FUSE OPTIONS IO EXPANSION - IO34

CONTROL PANEL E3 9 REGULATOR DIN RAIL CONTROLLER 1 - DRYER 1 CONTROL PANEL E4 12 REGULATOR DIN RAIL CONTROLLER 2
5X27-2 14 D
CONTROL PANEL 5X27-1 11 CONNECTOR CONTROL PANEL CONNECTOR DIN RAIL CONTROLLER 2
CONTROL PANEL 5X31-1 10 CONNECTOR CONTROL PANEL 5X31-2 13 CONNECTOR DIN RAIL CONTROLLER 2
CONTROL PANEL E2 5 EXPANSION MODULE IO2 PURELOGIC GRAPHIC CONTROL PANEL P1 11 DRYER PRESSURE SWITCH
CONTROL PANEL 3X23 5 CONNECTOR IO EXPANSION - IO2 CONTROL PANEL T1 2 MAIN TRANSFORMER CONTROL CIRCUIT
CONTROL PANEL 3X30 8 CONNECTOR DIGITAL OUTPUTS CONTROL PANEL T2 3 MAIN TRANSFORMER CONTROL CIRCUIT
CONTROL PANEL 3X31 8 CONNECTOR DIGITAL OUTPUTS CONTROL PANEL P2 14 DRYER PRESSURE SWITCH
E
CONTROL PANEL 3X33 6 CONNECTOR DIGITAL INPUTS CUSTOMER S0 2 MAIN SWITCH CUSTOMER INSTALLATION
CONTROL PANEL 3X34 7 CONNECTOR CUSTOMER S0-1 3 MAIN SWITCH CUSTOMER INSTALLATION
CONTROL PANEL 3X35 5 CONNECTOR

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controler Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 15 OF 16
FP

4.0 Various Update drawing references (TCR9925) 06/11/19/ 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

NOTES :
[A] Maximum fuses with regard to short circuit protection of starter. A
[B] Note: CAN connector 2 of WH 1627 0166 00 need to be connected to CAN2

[C] For field wiring: use copper wire only

[E] Tightening torque of bolts:

For contactors
Marking of connectors
metric thread size M6 8Nm (6lbft) 3X31
metric thread size M8 20Nm (15lbft)
metric thread size M10 40Nm (29lbpf) 1 3 5
B
For terminal 2 4 6
metric thread size M6 3Nm (2lbft)
metric thread size M8 6Nm (4lbft)
metric thread size M10 10Nm (7lbft) 3X33
[F] Transformer connections for 115 or 230V supply
1 3 5 7 9 11 13 15 17 19
V SUPPLY = 230V V SUPPLY = 115V
2 4 6 8 10 12 14 16 18 20

C
115 0 115 0 3X34
LINK 1 3 5 7 9 11 13 15 17

2 4 6 8 10 12 14 16 18
LINK LINK

115 0 115 0 0 115 115 0

5X27-1
1 3 5 7 9 11 13 15
0 24 0 24
2 4 6 8 10 12 14 16 D
V LOAD = 24V V LOAD = 24V

[G] Remove wire when installing a reserve manifold pressure switch as input 5X27-2
1 3 5 7 9 11 13 15
[H] Note: CAN connector 3 of WH 1627-0166-00 need to be connected to CAN2
2 4 6 8 10 12 14 16
[I] [Link] Provided Components 24VAC
[J] OPTION - service diagram 2212 0216 12
E
[K] OPTION - service diagram 2212 0216 18
[L] OPTION - service diagram 2212 0216 30

F
copied, used for manufacturing or communicated to any other person or company.
This document is our property and shall not without our permission be altered,

Name dMED DUPLEX Controller Service Diagram Secrecy Class

Material N/A 1102 K/ 2

CONFIDENTIAL:

Treatment N/A ACD

Tolerances,if not indicated,according to: Scale -:- Family 0 A3 Compare Drawing owner

ATLAS COPCO STANDARD Class Drawn by GCFJTN Blank nr. 0 Replaces ACM G
Version Drwg
B

1 Designation Sheet 16 OF 16
FP

4.0 Various Update drawing references 06/11/19 0 Kg 0 Kg

STATUS 4.0 Blank wt.
C

Fini wt.
G

Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D ISSUED
Des checked Prod checked Approved Date
10-05-19 2212 0215 09
 1 2 3 4 5 6 7 8 9 10

MAIN POWER SUPPLY

A
SH DESCRIPTION INSTALLED OPTIONAL COMPONENTS
1 INDEX VOLTAGE : ........... V
Smartbox
2 POWER CIRCUIT U2: 24VDC supply
FREQ : ...... Hz 3 PH
3 POWER CIRCUIT E10: smartbox

4 SUPPLY CIRCUIT CONTROL Energy recovery

TT53 : Temp. sensor energy recovery IN
5 CONTROL CIRCUIT TT54 : Temp. sensor energy recovery OUT
6 CONTROL CIRCUIT CONVERTER
B
7 REGULATOR MK5 (OPTIONAL) MAX FUSE ...................... A
8 REGULATOR MK5S
380-400-460 V 200-230-500-575 V
9 SMARTBOX
IEC aR gL/gG
10 INPUT CONNECTIONS 2X27
UL Class T Class K5
11 INPUT CONNECTIONS 2X28
CSA Class T HRC Form II
12 OPTIONAL CONTACTS
C
13 LEGEND
14 LEGEND
Use of Circuit Breaker i.s.o. Main Fuses is not allowed.
15 NOTES

SETTINGS

Q15 1.6 A
D
FUSE VALUES

F4 1.25 A
MOTOR DATA CSA/UL ONLY
F5 1.25 A
M1 kW HP SF : 1.25
F6 1.25 A
E
M2 kW HP
F35 ... A

F36 ... A

F37 ... A
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.

All materials supplied are in compliance with the requirements of the List of Prohibited Substance
Confidentiality Class
Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA 1102 K/
Not Applicable
CONFIDENTIAL:

Material Internal

Treatment Not Applicable ACDE

Scale 1:1 Family Not Applicable A3 Compare
Drawing owner
Drawn by ATLASCOPCO\INEDPa
Blank nr. Not Applicable Replaces API G
Version Drwg Designation Sheet 01 (15)
00 First Release Not Applicable Not Applicable Blank wt. N/A Kg Fini wt. 0 Kg
STATUS 00
Note
Posi-
tion
Modified from Date Intr./Appd. Parent 3D Model [Link] 3D Approved Internal
Des checked. Prod checked. Approved. Date
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
POWER CIRCUIT

[L]

FOR HTM VARIANT ONLY

In case of 200-230V
and 500-575V

C
[F]

[L]

for HTM & NFPA

variant
D
[I]

[A]

[F]
E
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.

[B]
CONFIDENTIAL:

CUSTOMERS' INSTALLATION
G
Designation Sheet 2 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 1 Next Page 3 A3
Drawing owner
API Approved Internal 00
Drawn by Date
ATLASCOPCO\INEDPa
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
POWER CIRCUIT

E
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.

[J]
CONFIDENTIAL:

G
Designation Sheet 3 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 2 Next Page 4 A3
Drawing owner
API Approved Internal 00
Drawn by Date
ATLASCOPCO\INEDPa
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
SUPPLY CONTROL CIRCUIT

[D]

E
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.
CONFIDENTIAL:

G
Designation Sheet 4 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 3 Next Page 5 A3
Drawing owner
API Approved Internal 00
Drawn by Date
ATLASCOPCO\INEDPa
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
CONTROL CIRCUIT

[G]
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.
CONFIDENTIAL:

G
Designation Sheet 5 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 4 Next Page 6 A3

Drawing owner
API Approved Internal 00
Drawn by Date
ATLASCOPCO\INEDPa
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
CONTROL CIRCUIT CONVERTER

CONVERTER CONTROL

ON
S2

OUTPUT RUNNING
E
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.
CONFIDENTIAL:

G
Designation Sheet 6 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 5 Next Page 7 A3
Drawing owner
API Approved Internal 00
Drawn by Date
ATLASCOPCO\INEDPa
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
REGULATOR MK5 (OPTIONAL)

ELEKTRONIKON Mk5 GRAPHIC A

[K]

E
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.
CONFIDENTIAL:

G
Designation Sheet 7 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 6 Next Page 8 A3
Drawing owner
API Approved Internal 00
Drawn by Date
ATLASCOPCO\INEDPa
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
REGULATOR MK5S

ELEKTRONIKON MK5S A
[K]

E
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.
CONFIDENTIAL:

G
Designation Sheet 8 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 7 Next Page 9 A3
Drawing owner
API Approved Internal 00
Drawn by Date
ATLASCOPCO\INEDPa
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
SMARTBOX

SMARTBOX OPTIONAL A

E
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.
CONFIDENTIAL:

G
Designation Sheet 9 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 8 Next Page 10 A3
Drawing owner
API Approved Internal 00
Drawn by Date
ATLASCOPCO\INEDPa
16/04/2020 [Link] 9820707130
CONFIDENTIAL:
This document is property of Atlas Copco AB and shall not without our permission be altered,
copied, used for manufacturing or communicated to any other person or company.
1

GND

ACDE

API
Drawing owner
T01

Name
2

GND

HTM & NFPA

VARIANT ONLY
T02
3

DIAGRAM SERVICE
GND

T03
4

GND

P01
5

V+

GA18-30VSD+ MED ISO/HTM/NFPA

DI-SUPPLY
6

DI02

STATUS
MOTOR PROTECTION

Approved Internal
DI01

Ed.

00
EMERGENCY STOP

Date
7

DI04
FTGOL PRESSURE S/W
[L]

FOR HTM & NFPA VARIANT

Drawn by
9Prev. Page

DI03
LOCAL/CENTRAL CONTROL
[L]

FOR HTM & NFPA VARIANT

8

ATLASCOPCO\INEDPa
Date

SUPPLY
Next Page 11

24VAC
A3

16/04/2020 [Link]

SUPPLY
24VAC
Designation
9

9820707130
10

Sheet 10
(15)
INPUT CONNECTIONS 2X27

F
B

D
A

E
C

G
CONFIDENTIAL:
This document is property of Atlas Copco AB and shall not without our permission be altered,
copied, used for manufacturing or communicated to any other person or company.
1

ACDE

API
Drawing owner
GND

Name
OPTION
2

T04

GND

OPTION
3

DIAGRAM SERVICE
T05

GND
4

P02

V+
5

DI-SUPPLY

GA18-30VSD+ MED ISO/HTM/NFPA

DI06
NOT USED

DI05
6

NOT USED

STATUS
DI08

Approved Internal
NOT USED

Ed.

00
Date
7

DI07
Drawn by NOT USED
Prev. Page

DI10
10

NOT USED
8

ATLASCOPCO\INEDPa

DI09
Date

NOT USED
Next Page 12
A3

16/04/2020 [Link]
Designation
9

9820707130
10

Sheet 11
(15)
INPUT CONNECTIONS 2X28

F
B

D
A

E
C

G
CONFIDENTIAL:
This document is property of Atlas Copco AB and shall not without our permission be altered,
copied, used for manufacturing or communicated to any other person or company.
1

ACDE

API
Drawing owner
Name
2
3

DIAGRAM SERVICE
FAILED TO GO ON LOAD
4

FOR HTM & NFPA VARIANT

EMERGENCY FORCED LOCAL

FOR HTM, ISO & NFPA VARIANT
5

MANUAL/AUTOMATIC OPERATION

GA18-30VSD+ MED ISO/HTM/NFPA

(250VAC 10A AC11)

GENERAL WARNING
POTENTIAL FREE CONTACTS
6

GENERAL SHUTDOWN

STATUS

Approved Internal
Ed.

00
Date
7

Drawn by
Prev. Page
11
8

ATLASCOPCO\INEDPa
Date
Next Page 13
A3

16/04/2020 [Link]
Designation
9

9820707130
10

Sheet 12
(15)
OPTIONAL CONTACTS

F
B

D
A

E
C

G
 1 2 3 4 5 6 7 8 9 10

A
LOCATION TAGNAME PAGE DESCRIPTION FUNCTION
CUSTOMER F0' 2 MAIN PROTECTION CUSTOMER INSTALLATION
COMPRESSOR F35 2 FUSES TRANSFORMER
COMPRESSOR F36 2 FUSES TRANSFORMER
COMPRESSOR F37 2 FUSES TRANSFORMER
COMPRESSOR M1 2 MOTOR MAIN
CUSTOMER S0 2 MAIN SWITCH CUSTOMER INSTALLATION B
CUSTOMER S10 2 MAIN SWITCH FOR HTM & NFPA VARIANT
COMPRESSOR T2 2 AUTO TRANSFORMER ONLY 200-230V/500-575V
CONTROL PANEL Z1 2 EMC FILTER IT VERSION 380..500V ONLY
CONTROL PANEL T23 2 CURRENT TRANSFORMER FOR HTM VARIANT
CONTROL PANEL P3 2 AMMETER FOR HTM VARIANT
CONTROL PANEL F2 3 CIRCUIT BREAKER FAN MOTOR
C
COMPRESSOR M2 3 MOTOR FAN
CONTROL PANEL F1 4 CIRCUIT BREAKER CONTROL TRANSFO PROTECTION
CONTROL PANEL F4 4 FUSE CONTROL CIRCUIT 115V
CONTROL PANEL F5 4 FUSE CONTROL CIRCUIT 24V
CONTROL PANEL F6 4 FUSE CONTROL CIRCUIT 24V
CONTROL PANEL T1 4 TRANSFORMER CONTROL CIRCUIT
CONTROL PANEL 2X30 5 CONNECTOR ELEKTRONIKON Mk5S
D
COMPRESSOR B1 5 ELECTRONIC DRAIN COOLER
CONTROL PANEL K15 5 CONTACTOR FAN MOTOR
CONTROL PANEL S3 5 EMERGENCY STOP PUSH BUTTON
COMPRESSOR Y1 5 SOLENOID VALVE BLOW OFF
COMPRESSOR Y2 5 SOLENOID VALVE RECIRCULATION VALVE
CONTROL PANEL 2X30 6 CONNECTOR ELEKTRONIKON Mk5S
E
COMPRESSOR TSHH11 6 TEMPERATURE SWITCH ELEMENT OUTLET
CONTROL PANEL U1 6 FREQUENCY CONVERTER MAIN MOTOR
CONTROL PANEL 2X20 7 CONNECTOR RS485 COMMUNICATION
CONTROL PANEL 2X22 7 CONNECTOR RS485 COMMUNICATION
CONTROL PANEL 2X25 7 ETHERNET RJ45
This document is property of Atlas Copco AB and shall not without our permission be altered,

CONTROL PANEL 2X26 7 MEMORY CARD

F
CONTROL PANEL E1 7 REGULATOR ELEKTRONIKON Mk5 GRAPHIC
copied, used for manufacturing or communicated to any other person or company.

CONTROL PANEL 2X20 8 CONNECTOR RS485 COMMUNICATION

CONTROL PANEL 2X22 8 CONNECTOR RS485 COMMUNICATION
CONTROL PANEL U2 9 POWER SUPPLY 24VAC/24VDC
CONFIDENTIAL:

CONTROL PANEL X1 9 CONNECTOR OF E10 SUPPLY SMARTBOX

G
Designation Sheet 13 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 12 Next Page 14 A3
Drawing owner
API Approved Internal 00
Drawn by
ATLASCOPCO\INEDPa
Date
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10

LOCATION TAGNAME PAGE DESCRIPTION FUNCTION

CONTROL PANEL X153 9 CONNECTOR SMARTBOX
COMPRESSOR SKID S6 10 FTGOL PRESSURE SWITCH (FOR HTM & NFPA VARIANT)
COMPRESSOR PT20 10 PRESSURE TRANSDUCER DELIVERY AIR
COMPRESSOR TT01 10 TEMPERATURE SENSOR AMBIENT
COMPRESSOR TT11 10 TEMPERATURE SENSOR ELEMENT OUTLET
COMPRESSOR TT12 10 TEMPERATURE SENSOR COMPRESSOR OUTLET (FOR HTM & NFPA VARIANT)
B
CONTROL PANEL 1X5 10 CONNECTOR SUPPLY DOWNLOAD REGULATOR
CONTROL PANEL 2X27 10 CONNECTOR ELEKTRONIKON MK5S
CONTROL S4 10 LOCAL/CENTRAL CONTROL LAN/LOCAL (FOR HTM & NFPA VARIANT)
COMPRESSOR TT53 11 TEMPERATURE SENSOR ENERGY RECOVERY IN
COMPRESSOR TT54 11 TEMPERATURE SENSOR ENERGY RECOVERY OUT
CONTROL PANEL 2X28 11 CONNECTOR ELEKTRONIKON MK5S
CONTROL PANEL 2X30 12 CONNECTOR ELEKTRONIKON MK5 GRAPHIC
CONTROL PANEL 2X30 12 CONNECTOR ELEKTRONIKON MK5 GRAPHIC C
CONTROL PANEL 2X31 12 CONNECTOR ELEKTRONIKON MK5 GRAPHIC

E
This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.
CONFIDENTIAL:

G
Designation Sheet 14 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 13 Next Page A3
Drawing owner
API Approved Internal 00
Drawn by
ATLASCOPCO\INEDPa
Date
16/04/2020 [Link] 9820707130
 1 2 3 4 5 6 7 8 9 10
NOTES

NOTES :
A
[A] Maximum fuses with regard to short circuit protection of starter. Marking of connectors and terminals
Cable section might impose fuses of smaller value. Terminal #1 = Terminal with end plate
2
[B] Power supply to be connected for : 3
1. CLOCKwise rotation of fanmotor 1

[D] To connect correct transfo-voltage see on transfo

[F] For field wiring : use copper wire only end plate
2X27, 2X28 B
[G] F.P.E. field provided equipment
1 3 5 7 9 11 13
Y1: 115V 17VA
B1: 115V 7VA 2 4 6 8 10 12 14

[I] Tightening Torque Values:

Component Reference Connection Type Torque Min-Max (Nm) Unit

EMC Filter Z1 Terminal Screw / PE-Bolt M6 2 - 4 / 6 GA18-22VSD+ C
EMC Filter Z1 Terminal Screw / PE-Bolt M8 2,5 - 5 / 12 GA26-30VSD+
EMC Filter Z1 Terminal Screw / PE-Bolt 3 - 6 / 20 GA18-30VSD+ (IT)
Pressure transducer pin configuration
M10
1 : Supply V+
Inverter U1 Bolt M8 9 - 11 GA18-30VSD+ 2 : Ground
Circuit Breaker F1 Terminal Screw (M3,5) 2,8 GA18-30VSD+ 3: Signal
4 : Sealed with dummy
Circuit Breakers Q15 Terminal Screw 0,8 - 1,2 GA18-30VSD+
Contactor K15 Terminal Screw 0.8 - 1,2 GA18-30VSD+
D
Terminal 1X0:PE Terminal Screw (M5) 2,5 - 3 GA18-30VSD+
Terminal 1X0 Terminal Screw (M6) 3,2 - 3,7 GA18-30VSD+
Terminal 1X0:N Terminal Screw (M6) 3,2 - 3,7 GA18-30VSD+
Terminal 1X0:PE Terminal Screw (M6) 3,2 - 3,7 GA18-30VSD+
Terminal 1X0 to Q15 Terminal Screw (M3) 0,6 - 0,8 GA18-30VSD+

[J] For left turning electro-magnetic field, connections: U,V,W

For right turning electro-magnetic field (Europe), connections: U,W,V

[K] CAN cable 1625 6252 11 needs to be connected to CAN2

[L] S10,S4,S6,P3 & T23 To be Mounted on AC Production Line

This document is property of Atlas Copco AB and shall not without our permission be altered,

F
copied, used for manufacturing or communicated to any other person or company.
CONFIDENTIAL:

G
Designation Sheet 15 (15)
ACDE Name DIAGRAM SERVICE GA18-30VSD+ MED ISO/HTM/NFPA STATUS Ed. Date Prev. Page 14 Next Page A3
Drawing owner
API Approved Internal 00
Drawn by
ATLASCOPCO\INEDPa
Date
16/04/2020 [Link] 9820707130