Scribd
Upload
378 views1 page

Rourkela Steel Plant Test Certificate

This test certificate summarizes the chemical composition, mechanical properties, and confirms that a batch of steel plates meets the requirements of IS 2062 standard. The steel has a carbon content of 0.17%, manganese of 1.37%, and meets other chemical composition thresholds. Testing showed the steel had a yield strength of 385 MPa, tensile strength of 551 MPa, and 26% elongation. The batch of 6 plates totaling 28.38 tons was produced using a BOF-LHF-RHOB-CC-NPM process route and meets the grade, size, weight, and bend test specifications.

Uploaded by

Ravikant Yadav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
378 views1 page

Rourkela Steel Plant Test Certificate

This test certificate summarizes the chemical composition, mechanical properties, and confirms that a batch of steel plates meets the requirements of IS 2062 standard. The steel has a carbon content of 0.17%, manganese of 1.37%, and meets other chemical composition thresholds. Testing showed the steel had a yield strength of 385 MPa, tensile strength of 551 MPa, and 26% elongation. The batch of 6 plates totaling 28.38 tons was produced using a BOF-LHF-RHOB-CC-NPM process route and meets the grade, size, weight, and bend test specifications.

Uploaded by

Ravikant Yadav
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

STEEL AUTHORITY OF INDIA LIMITED IS 2062

Page 1 of 1
ROURKELA STEEL PLANT
ROURKELA - 769011 (ODISHA)
RESEARCH AND CONTROL LABORATORY
Test Certificate For : HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL
Test Certificate No.: 522197 Dated: 30.09.2021 Product: PM Plate
To : SATURN PREFAB INDIA PVT LTD PLOT NO 727-728 SECT-3, PITHAMPUR Indore 454775

It is cerified that the materials described below fully conforms to IS 2062 - 2011. The chemical composition and Mechanical properties of the product as tested in accordance with the scheme of Testing and Inspection
contained in BIS Certification marks License No CM/L 0000053223 are as Indicated against each order. The material supplied conforms to standard Rolling and weight tolerances. (PLEASE REFER TO IS 2062 - 2011 FOR
DETAILS OF SPECIFICATION REQUIREMENTS )

Ladle Analysis
Cast No C% Mn% P% S% Si% Al% CE Nb% Ti%
2114628 0.1700 1.3700 0.0280 0.0160 0.2550 0.0240 0.3980 0.0350 0.0110
Sl. MP / SO No. Cast Size(mm) No of Grade / Mode Of Killing BATCH NUMBERS
No. (TxWxL) Piece(s)
1 1400553786 2114628 20x2500x12000 6 IS 2062 E350 BR / ALSIK / TRIM SCC1074141,SCC1074142,SCC1074143,SCC1074151,SCC1074152,SCC1074153
Total Pieces : 6 Total Weight(Tons) : 28.380
Mechanical Properties
Cast No. YS UTS El Bend CVN (1) CVN (2) CVN (3) CVN at
Test RT
(Avg)
(MPA) (MPA) (%) (J) (J) (J) (J)
2114628 385 551 26 OK 82 86 114 94
388 556 26 OK
Remarks : PROCESS ROUTE - BOF-LHF-RHOB-CC-NPM

BATA KRISHNA GIRI

Dispatch Advice No.: 811371315 Dated: 29.09.2021 Truck No: CG07BG1695 Asst. Manager , R&C Lab
Rourkela Steel Plant

You might also like