Provaset
EQUIPMENT FOR LEAK TESTS
BY ABSOLUTE PRESSURE DECAY
T2
• Leak test with full scale up to 6 bar
• Resolution up to 1 Pa (0.01 mbar)
• 3.5” colour LCD display with touch
screen
• Up to 100 test programs tables
• Digital I/O interface for PLCs, RS232/
RS485 serial lines and USB for PC
• Test recording via Ethernet and USB
DESCRIPTION
PROVASET T2 is a compact, versatile limited areas but it could be integrated Provaset T2 is available with 2 bar
and extremely reliable instrument on automatic systems managed by or 6 bar full scale model, with 1 Pa
that applies the latest electronic and PLC. resolution on leak reading.
pneumatic technologies to offer the Provaset T2 is able to communicate A Staubli connector is available to
best performances. through digital I/O, Ethernet, USB host/ connect a Leak Master.
The new Provaset T2 updates the slave and RS232/RS485 serial line The test pressure can be regulated with
previous Provaset 2P model, with interfaces. a manual precision pressure regulator;
which mantains the program and The test data collection is possible on the pressure of regulation is shown on
connection compatibilities. Provaset T2 USB memory and via Ethernet. the display.
is designed for manual use on bench in
OPTIONS (T2 PLUS)
• Staubli connector on front panel
TEST
• Ethernet port to instrument management and data collect
• 100 test programs, statistics, calculation of the leak flow rate Q in cm³/min or cm³/h
• Automatic pendrive data collection (through USB host)
OPTIONAL ACCESSORIES
• Air filters
• Certificated Leak Master to be inserted in the Staubli® connector
• Remote control keypad
Provaset T2
Rev 04/22
SPECIFICATIONS
Power supply 100÷240 Vac; 50÷60 Hz; 15W; Option: 24 Vcc, 15W
Compressed air line Dry, non-condensing, 5-micron filtered and oil-free air, compliant with ISO8573-1, 6x4 mm hose fitting
Measurement area: 0÷2 bar, resolution 1 Pa; 0÷6 bar, resolution 1 Pa
Test pressure
Accuracy: +/- 0.5% FS
Pressure drop Accuracy: +/- 1%; read value +/- 1 Pa
LCD display with touch screen
Keyboard
Manual Start/Stop button
Display 3.5” colour TFT LCD display with touch screen
Indicators “Passed” result led, “Failed” result led
Test counter PASSED and FAILED totals, resettable to zero
Audio alert Built-in beeper
Clock Date and time
Programmable parameters Up to 100 test programs
PLC connections 4 photocoupled inputs and 4 photocoupled outputs
Configurable RS232/RS485 serial lines
Data interfaces USB slave, USB Host, Ethernet (option)
Protocols: Modbus and CVS
Staubli® Connector For Leak Master (option)
T2 EP option for obstruction test in continuous
The equipment works into a continuos mode, checking whether each small tube under test is free of
occlusions. DIMENSIONS
The test starts immediately and automatically after the tube is easily inserted by the operator into the
test port.
135 mm
The operator won’t have to press any button to start the measurement..
Each tube is tested independently, T2- EP gives the result on the screen up to the tube is finally
removed by the operator.
Thanks to the green and red leds on the equipment and on the screen, and an audible alarm, the
18
0m
operator has an immediate PASSED or FAILED result and can verify that the tube under test has no
m
obstructions.
160 mm
Each result is available up to the tube is removed from the equipment test port.
AV10 - Pneumatic module with automatic start and release
for blood lines leak testing
The AV10 pneumatic module is supplied as an external accessory to be connected to air
leak testing equipment.
Designed for blood lines leak testing in air, this version is equipped with a mechanism that
automatically starts (start at the leak tester) the test when the operator connects the blood
line, and automatically releases it at the end of the test if the test result is positive (good
piece). The AV10 module can be used as a pneumatic connection interface between Tecna
testing equipment and blood lines.
The internal valves of the AV10 module are used to advance or retract the release
mechanism and are electrically controlled from the test equipment.
TECNA Tecna srl tel +39 0535 734200 [Link] sales@[Link]
Distribuito da /Distributed by
