100% found this document useful (2 votes)

4K views63 pages

Petronas Technical Standards: Piping Classes - Refining and Chemicals

Uploaded by

Đạt Trần

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

100% found this document useful (2 votes)

4K views63 pages

Petronas Technical Standards: Piping Classes - Refining and Chemicals

Uploaded by

Đạt Trần

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

PETRONAS TECHNICAL STANDARDS

DESIGN AND ENGINEERING PRACTICE

MANUAL

PIPING CLASSES – REFINING AND CHEMICALS

PTS [Link]

October 2011

2011 PETROLIAM NASIONAL BERHAD (PETRONAS)

All rights reserved. No part of this document may be reproduced, stored in a retrieval system or transmitted in any form or by any
means (electronic, mechanical, photocopying, recording or otherwise) without the permission of the copyright owner.
PTS [Link]
October 2011
Page 3

PREFACE

PETRONAS Technical Standards (PTS) publications reflect the views, at the time of publication, of
PETRONAS OPUs/ Divisions.

They are based on the experience acquired during the involvement with the design, construction,
operation and maintenance of processing units and facilities. Where appropriate they are based on,
or reference is made to, national and international standards and codes of practice.

The objective is to set the recommended standard for good technical practice to be applied by
PETRONAS' OPUs in oil and gas production facilities, refineries, gas processing plants, chemical
plants, marketing facilities or any other such facility, and thereby to achieve maximum technical and
economic benefit from standardisation.

The information set forth in these publications is provided to users for their consideration and
decision to implement. This is of particular importance where PTS may not cover every requirement
or diversity of condition at each locality. The system of PTS is expected to be sufficiently flexible to
allow individual operating units to adapt the information set forth in PTS to their own environment and
requirements.

When Contractors or Manufacturers/ Suppliers use PTS they shall be solely responsible for the
quality of work and the attainment of the required design and engineering standards. In particular, for
those requirements not specifically covered, it is expected of them to follow those design and
engineering practices which will achieve the same level of integrity as reflected in the PTS. If in
doubt, the Contractor or Manufacturer/ Supplier shall, without detracting from his own responsibility,
consult the owner.

The right to use PTS rests with three categories of users:

1) PETRONAS and its affiliates.

2) Other parties who are authorised to use PTS subject to appropriate contractual arrangements.
3) Contractors/ subcontractors and Manufacturers/ Suppliers under a contract with users referred to
under 1) and 2) which requires that tenders for projects, materials supplied or - generally - work
performed on behalf of the said users comply with the relevant standards.

Subject to any particular terms and conditions as may be set forth in specific agreements with users,
PETRONAS disclaims any liability of whatsoever nature for any damage (including injury or death)
suffered by any company or person whomsoever as a result of or in connection with the use,
application or implementation of any PTS, combination of PTS or any part thereof. The benefit of this
disclaimer shall inure in all respects to PETRONAS and/or any company affiliated to PETRONAS that
may issue PTS or require the use of PTS.

Without prejudice to any specific terms in respect of confidentiality under relevant contractual
arrangements, PTS shall not, without the prior written consent of PETRONAS, be disclosed by users
to any company or person whomsoever and the PTS shall be used exclusively for the purpose they
have been provided to the user. They shall be returned after use, including any copies which shall
only be made by users with the express prior written consent of PETRONAS.

The copyright of PTS vests in PETRONAS. Users shall arrange for PTS to be held in safe custody
and PETRONAS may at any time require information satisfactory to them in order to ascertain how
users implement this requirement.
PTS [Link]
October 2011
Page 4

TABLE OF CONTENTS
1. INTRODUCTION ...................................................................................................... 5
1.1 SCOPE ..................................................................................................................... 5
1.2 DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS ......... 5
1.3 DEFINITIONS ........................................................................................................... 5
1.4 CROSS-REFERENCES ........................................................................................... 6
1.5 SUMMARY OF MAIN CHANGES ............................................................................. 6
1.6 COMMENTS ON THIS DEP ..................................... Error! Bookmark not defined.
2. PIPING CLASSES – SERVICES AND MATERIALS SELECTION INDEX .............. 8
3. BALL VALVES ......................................................................................................... 9
4. LEVEL DISPLACER CHAMBERS ......................................................................... 10
5. PIPING CLASSES................................................................................................ 111
6. REFERENCES ....................................................................................................... 12

APPENDICES
APPENDIX A DETAILED CHANGES PER PIPING CLASS BETWEEN THE
JANUARY 2009 EDITION AND THE DECEMBER 2010 EDITION ................ 94
APPENDIX B HISTORY OF PTS PIPING CLASSES INDEX............................................... 15
PTS [Link]
October 2011
Page 5

1. INTRODUCTION

1.1 SCOPE
This PTS provides guidelines, requirements and recommended piping classes, developed
for use in refineries and chemical plants. The basis of design of the piping classes is
described in PTS [Link].
The general requirements for piping systems are specified in PTS [Link].
Piping classes developed primarily but not exclusively for exploration and production
facilities are contained in PTS [Link].
This is a revision of the PTS of the same number dated January 2010; Refer to (1.5) for
summary of changes since the previous edition of this PTS.

1.2 DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS

Unless otherwise authorised by PETRONAS, the distribution of this PTS is confined to
companies forming part of the PETRONAS Group of companies, and to Contractors
nominated by them.
This PTS is intended for use in oil refineries, chemical plants, gas plants, exploration and
production facilities and supply/ marketing installations.
If national and/or local regulations exist in which some of the requirements may be more
stringent than in this PTS the Contractor shall determine by careful scrutiny which of the
requirements are the more stringent and which combination of requirements will be
acceptable as regards safety, environmental, economic and legal aspects. In all cases the
Contractor shall inform the Principal of any deviation from the requirements of this PTS
which is considered to be necessary in order to comply with national and/ or local
regulations. The Principal may then negotiate with the Authorities concerned with the object
of obtaining agreement to follow this PTS as closely as possible.

1.3 DEFINITIONS

1.3.1 General definitions

The Contractor is the party that carries out all or part of the design, engineering,
procurement, construction, commissioning or management of a project or operation of a
facility. The Principal may undertake all or part of the duties of the Contractor.
The Manufacturer/Supplier is the party that manufactures or supplies equipment and
services to perform the duties specified by the Contractor.
The Principal is the party that initiates the project and ultimately pays for it. The Principal
may also include an agent or consultant authorised to act for, and on behalf of, the
Principal.
The word shall indicates a requirement.
The capitalised term SHALL [PS] indicates a process safety requirement.
The word should indicates a recommendation.

1.3.2 Specific definitions

Term Definition
Hydrogen service in which the process stream contains hydrogen at a partial pressure
service of 7 bar (abs) and higher.
Low metal temperature of 0 ºC and lower.
temperature
PTS [Link]
October 2011
Page 6

Term Definition
Piping class assembly of piping components in a piping system, suitable for a defined
service within design limits.
Post Weld heat treatment carried out after welding to reduce residual stresses and to
Heat temper hardened microstructures created by welding.
Treatment
Very toxic substances that are very hazardous for the environment or human health,
(substances) as specified in PTS [Link]. (which also identifies "toxic" substances by
reference to chemical substances databases).

1.4 CROSS REFERENCES

Where cross references to other parts of this PTS are made, the referenced PTS number is
shown in brackets. Other standards referenced in this manual are listed in (6).

1.5 SUMMARY OF MAIN CHANGES

This is a revision of the PTS of the same number dated April 2003 and the last edition of
the various piping classes was dated January 2000.
Additionally, the piping class portfolio has been updated in line with business development
requirements, new and updated international standards, and feedback from clients. A
number of cost saving developments have been introduced.
The most substantial changes are explained below.
A detailed overview of the changes in each piping class is given in Appendix A and for
history on changes to the piping classes to date shall be referenced from DEP [Link]
February 2011 Appendix B.

1.5.2 Design code update

A new revision of ASME B31.3 was issued in December 2008. Piping classes have been
updated in line with the latest code requirements for welded components at elevated
temperatures.

1.5.3 New piping classes

New piping class (31311) has been introduced for trace hydrofluoric acid service (HF below
2%) and operating below 220°C (430°F). For this piping clas, base material is fine grain
carbon steel with restriction of residual elements in accordance to supplementary
requirements S2 of ASTM A333.

1.5.4 Fittings
Branch outlet fittings were reviewed and updated where applicable.
In stainless steel piping classes, welded stainless steel fittings for sizes DN 200 (NPS 8)
and above have been introduced to take the cost advantage.

1.5.5 Valves
New set of small-bore socket welded valves with 13% Cr trim has been introduced in line
with market supply and for economic benefit for non-sour and non-corrosive services.
In order to enhance the cost effectives of our standards, the current valve standards have
been reviewed and modified where necessary to align with manufacturer’s practice where
appropriate. As part of this, following changes were incorporated:
 For small bore welded valves (without PWHT requirement), face to face dimensions
changed to manufacturer’s standard.
PTS [Link]
October 2011
Page 7

 For carbon steel steam service piping classes with valve trim material as SS 316 +
stellite has been changed to 13% Cr + Stellite,
 For gate/ globe valves with plain trim material as AISI 410 (or) 13 % Cr steel, has
been changed to AISI 410 + Stellite 6.
For DN 15 through DN 40 (NPS ½ through NPS 1½), Class 150 and 300, Metal Seated
Floating Ball Valves ISO 17292 with reduced bore has been specified as single piece body,
which by design physically limits the dimensions of the ball/stem. Metal seated valves
require considerably higher torques and need higher strength ball/stem. In order to meet
this requirement, metal seated floating ball valves for the above mentioned range has been
modified to full bore ball valves.

1.5.6 Branch table

For toxic services (category M fluid service in accordance to ASME B31.3), “Pipe to Pipe
connections” have been updated to branch outlet fittings to meet the requirements of
Clause M306.5 of ASME B31.3.

1.5.7 Assemblies
In accordance to clause [Link], PTS [Link], for the following services, double valve
isolation is required for:
 Piping classes with very toxic fluid service ANSI 150# to ANSI 600#
 Fluids containing Hydrogen at piping class ratings ANSI 600# and above.
 Flashing fluids at piping class ratings ANSI 600# and above
 For other processes at piping class ratings ANSI 900# and above.
Based on the above mentioned requirement, only in those piping classes where the
isolation philosophy unambiguously requires double isolation, the following assemblies
were updated:
i) Pressure instrument connection
ii) Orifice connection
iii) Meter run connection
PTS [Link]
October 2011
Page 8

2. PIPING CLASSES – SERVICES AND MATERIALS SELECTION INDEX

This index is presented as a spreadsheet on Standard Form PTS [Link].

DEP 31380184 Gen -

[Link]
PTS [Link]
October 2011
Page 9

3. BALL VALVES

The use of soft-seated trunnion-mounted ball valves in listed services were reviewed. In
cases where commonly used elastomers were not compatible with the fluid service, the
service was reassigned to a piping class without elastomers. Formic acid service was
deleted from the service index, pending the development of a new piping class.
For users wanting to include trunnion mounted ball valves in affected services, the table
below shows the applicable MESC number range for suitable soft-seated ball valves that
are available in MESC version 13.
It is intended that the next edition of this PTS will include a new ball valve piping classes for
these services.

Piping class Service MESC number range

11001 Acetone 770025 003.1 to 012.1

Acetonitrile 770025 044.1 to 046.1
Methanol
Butanone (Methyl ethyl ketone)
13032 Carbon dioxide 770322 003.1 to 012.1
770322 044.1 to 046.1
13033 Formic acid 770319 003.1 to 012.1
770319 044.1 to 046.1
31001 Acetone 770025 053.1 to 062.1
Acetonitrile 770253 064.1 to 066.1
Methanol
Butanone (Methyl ethyl ketone)
33032 Carbon dioxide 770322 053.1 to 062.1
770363 064.1 to 066.1
33033 Formic acid 770319 053.1 to 062.1
770359 064.1 to 066.1
PTS [Link]
October 2011
Page 10

4. LEVEL DISPLACER CHAMBERS

The table below shows level displacer chambers related to piping class material which are
available in the MESC catalogue. The related standard drawing is S 38.056.

Piping class Level displacer chamber

MESC number range
material description material description

Alloy steel 0.5Mo ASTM A 335 grade P1 768060 702.1 to 738.1

Alloy steel 1.25Cr-0.5Mo ASTM A 335 grade P11 768060 802.1 to 978.1

Alloy steel 1.25Cr-0.5Mo PWHT ASTM A 335 grade P11 768064 022.1 to 078.1

Alloy steel 5Cr-0.5Mo PWHT ASTM A 335 grade P5 768060 742.1 to 938.1

Alloy steel 9Cr-1Mo PWHT ASTM A 335 grade P9 768059 702.1 to 798.1

Carbon steel ASTM A 106 grade B 768060 042.1 to 138.1

Carbon steel H-Sour ASTM A 106 grade B 768060 402.1 to 498.1

Carbon steel PWHT ASTM A 106 grade B 768059 042.1 to 118.1

Carbon steel H-Sour PWHT ASTM A 106 grade B 768059 442.1 to 478.1

Carbon steel LT ASTM A 333 grade 6 768060 242.1 to 338.1

Carbon steel LT H-Sour ASTM A 333 grade 6 768060 582.1 to 678.1

Carbon steel LT PWHT ASTM A 333 grade 6 768059 242.1 to 298.1

Stainless steel 304 AISI 304 768061 042.1 to 118.1

Stainless steel 316 AISI 316 768061 442.1 to 538.1

Stainless steel 316L AISI 316L 768062 002.1 to 038.1

Stainless steel 321/347 AISI 321/347 768061 842.1 to 938.1

Stainless steel 321 stab HT AISI 321 stab HT 768061 562.1 to 678.1

Duplex stainless steel ASTM A 790 UNS S31803 768062 402.1 to 498.1

Super duplex stainless steel ASTM A 790 UNS S32750 768062 502.1 to 538.1
PTS [Link]
October 2011
Page 11

5. PIPING CLASSES

The piping classes for ASME class ratings 150, 300, 600, 900, 1500 and 2500 are
contained in separate files for each ASME class rating.
These piping classes SHALL [PS] be used for services as specified in the Services and
Materials Selection Index PTS [Link]. (e.g. fluid service, ASME pressure rating,
temperatures, sizes, materials, valves, etc.).
For services not covered in PTS [Link]., piping classes shall be developed based on
the philosophies outlined in PTS [Link] and PTS [Link]. Guidance on the
development of project-specific piping classes is given in PTS [Link].
PTS [Link]
October 2011
Page 12

6. REFERENCES

In this PTS, reference is made to the following publications:

NOTES:
1. Unless specifically designated by date, the latest edition of each publication shall be used, together with any
amendments/supplements/revisions thereto.
2. The PTSs are available to PETRONAS staff on the AXIS Web site at
[Link]
3. Excluded from this list are the standards referenced in the piping classes themselves, a list of which would be too
extensive.

PETRONAS STANDARDS
Definition of temperature, pressure and toxicity levels PTS [Link]
Piping classes – Basis of design PTS [Link]
Piping – General requirements PTS [Link]
Piping classes – Exploration and production PTS [Link]
Compilation of a specification for piping systems PTS [Link]
Standard Form: Piping classes – Services and material PTS [Link]
selection index
Standard Drawing: Displacer chambers S 38.056
AMERICAN STANDARDS
Process piping ASME B31.3:2008
Issued by:
American Society of Mechanical Engineers
th
345 East 47 Street
New York NY 10017
USA

Standard specification for seamless carbon steel pipe for high- ASTM A 106
temperature service
Standard specification for seamless, welded, and heavily cold ASTM A 312
worked austenitic stainless steel pipes
Standard specification for seamless and welded steel pipe for ASTM A 333
low-temperature service
Standard specification for seamless ferritic alloy- ASTM A 335
steel pipe for high-temperature service
Standard specification for electric-fusion-welded ASTM A 358
austenitic chromium-nickel stainless steel pipe for
high-temperature service and general applications
Standard specification for seamless and ASTM A 790
weldedferritic/austenitic stainless steel pipe
Issued by:
American Society for Testing and Materials,
100 Barr Harbor Drive, West Conshohocken,
PA 19428-2959,
USA
PTS [Link]
October 2011
Page 13

INTERNATIONAL STANDARDS
Metal ball valves for petroleum, petrochemical and allied ISO 17292
industries
Issued by:
ISO Central Secretariat
1, ch. de la Voie-Creuse
Case postale 56
CH-1211 Genève 20
Switzerland
Copies can also be obtained from national standards
organizations.
PTS [Link]
October 2011
Page 14

APPENDIX A DETAILED CHANGES PER PIPING CLASS

31380112 Appendix
[Link]
PTS [Link]
October 2011
Page 15

APPENDIX B HISTORY OF DEP PIPING CLASSES INDEX

History of piping
classes [Link]
PTS [Link]
October 2011
Page 16
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Class rating / Diameter range Material Sour PWHT Corr. Valve ASME Temperature Ball
Piping Piping PN ASME class service allow. FETC B16.5 Piping class where Tmin valve
class class barg 150 DN DN 300 DN DN 600 DN DN 900 DN DN 1500 DN DN 2500 DN DN >2500 (note 2) (note 13) mat. [°C] (note 14) is between seat
(old) max (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) group Min Max 0° and -20°C
use PC
PTS [Link] 1000 1011 1 15 600 3 15 600 Carbon steel 1 A(HS) 1.1 -20 400 1000
PTS [Link] 1001 1021 1 15 1200 3 15 1200 Carbon steel 1 B 1.1 -20/0 150 1001-20 soft

PTS [Link] 1001 1021 1 15 1200 3 15 1200 Carbon steel 1 B 1.1 -20/0 150 1001-20 soft
PTS [Link] 1001 1021 1 15 1200 3 15 1200 Carbon steel 1 B 1.1 -20/0 150 1001-20 soft
PTS [Link] 1001 1021 1 15 1200 3 15 1200 Carbon steel 1 B 1.1 -20/0 150 1001-20 soft
PTS [Link] 1001-20 see 11001 3 15 1200 Carbon steel 1 B 1.1 -20 150 soft
PTS [Link] 1001-KS 1 15 1200 3 15 1200 Carbon steel 1 B 1.1 -20 150 soft
PTS [Link] 1002 1021 1 15 600 3 15 600 Carbon steel 1 A(HS) 1.1 -20 150 1002 soft
PTS [Link] 1002 1021 1 15 600 3 15 600 Carbon steel 1 A(HS) 1.1 0 150 1002-KS soft
PTS [Link] 1002 1021 1 15 600 3 15 600 Carbon steel 1 A(HS) 1.1 0 150 1002-KS soft
PTS [Link] 1002 1021 1 15 600 3 15 600 Carbon steel 1 A(HS) 1.1 0 150 1002-KS soft
PTS [Link] 1002-KS 1 15 600 3 15 600 Carbon steel 1 A(HS) 1.1 -20 150 soft
PTS [Link] 1003 1373 1 15 600 3 15 600 Carbon steel 3 A(HS) 1.1 0 150 1003-KS soft
PTS [Link] 1003-KS 1 15 600 3 15 600 Carbon steel 3 A(HS) 1.1 -20 150 soft
PTS [Link] 1005 1023 1 15 600 3 15 600 Carbon steel moderate PWHT 1 B 1.1 -20 150 1005 soft
PTS [Link] 1007 1372 1 15 600 3 15 600 Carbon steel moderate PWHT 3 B 1.1 -20/0 150 1007-20 soft
PTS [Link] 1007 1372 1 15 600 3 15 600 Carbon steel moderate PWHT 3 B 1.1 -20/0 150 1007-20 soft
PTS [Link] 1007 1372 1 15 600 3 15 600 Carbon steel moderate PWHT 3 B 1.1 -20/0 150 1007-20 soft
PTS [Link] 1007-20 use 11007 3 15 600 Carbon steel moderate PWHT 3 B 1.1 -20 150 soft
PTS [Link] 1008 1372 1 15 600 3 15 600 Carbon steel moderate PWHT 3 A(HS) 1.1 0 150 1008-KS soft
PTS [Link] 1008-KS 1 15 600 3 15 600 Carbon steel moderate PWHT 3 A(HS) 1.1 -20 150 soft
PTS [Link] 1009 1372 1 15 600 3 15 600 Carbon steel moderate PWHT 3 A(HS) 1.1 0 200 - metal
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20

PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20
PTS [Link] 1011 1011 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20/0 400 1011-20

PTS [Link] 1011-20 - see 11011 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 1 B 1.1 -20 400
PTS [Link] 1012 1012 3 15 1200 Carbon steel 1 B 1.1 -20/0 400 1012-20
PTS [Link] 1012-20 - 3 15 1200 Carbon steel 1 B 1.1 -20 400
PTS [Link] 1013 1013 1 15 1200 3 15 1200 6 15 1200 9 15 600 Carbon steel moderate PWHT 1 B 1.1 -20/0 400 1013-20
PTS [Link] 1013-20 - see 11013 3 15 1200 6 15 1200 9 15 600 Carbon steel moderate PWHT 1 B 1.1 -20 400
PTS [Link] 1014 2080 1 15 600 3 15 600 Carbon steel 1 B 1.1 -20 427
PTS [Link] 1015 1015 1 15 1200 3 15 600 6 15 600 9 15 600 15 15 400 Carbon steel high 1 B 1.1 0 400 1015-KS
PTS [Link] 1015-KS - 1 15 1200 3 15 600 6 15 600 9 15 600 15 15 400 Carbon steel high 1 B 1.1 -20 340
PTS [Link] 1026 1025 1 15 600 3 15 600 Carbon steel high PWHT 3 B 1.1 0 210 1026-KS metal
PTS [Link] 1026-KS - 1 15 600 3 15 600 Carbon steel high PWHT 3 B 1.1 -20 210 metal
PTS [Link] 1031 1031 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 3 B 1.1 0 400 1031-KS
PTS [Link] 1031-KS - 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 25 15 300 Carbon steel 3 B 1.1 -20 340
PTS [Link] 1035 1125 1 15 600 3 15 600 Carbon steel high 1 B 1.1 0 150 1035-KS soft
PTS [Link] 1035-KS - 1 15 600 3 15 600 Carbon steel high 1 B 1.1 -20 150 soft
PTS [Link] 1036 1126 1 15 600 3 15 600 Carbon steel high 3 B 1.1 0 150 1036-KS soft
PTS [Link] 1036-KS - 1 15 600 3 15 600 Carbon steel high 3 B 1.1 -20 150 soft
PTS [Link] 1041 1041 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 Carbon steel moderate 1 B 1.1 -20/0 400 1041-20
PTS [Link] 1041-20 - see 11041 3 15 1200 6 15 1200 9 15 1200 15 15 400 Carbon steel moderate 1 B 1.1 -20 400
PTS [Link] 1042 1042 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 Carbon steel moderate 3 B 1.1 -20/0 400 1042-20
PTS [Link] 1042 1042 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 Carbon steel moderate 3 B 1.1 -20/0 400 1042-20
PTS [Link] 1042 1042 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 Carbon steel moderate 3 B 1.1 -20/0 400 1042-20
PTS [Link] 1042-20 - see 11042 3 15 1200 6 15 1200 9 15 1200 15 15 400 Carbon steel moderate 3 B 1.1 -20 400
PTS [Link] 1055 1055 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 400 Carbon steel high 3 B 1.1 -20/0 400 1055-20
PTS [Link] 1055-20 - see 11055 3 15 1200 6 15 1200 9 15 1200 15 15 400 Carbon steel high 3 B 1.1 -20 400
PTS [Link] 1061 1131 3 15 600 Carbon steel moderate 1 B 1.1 0 150 1061-KS soft
PTS [Link] 1061-KS - 3 15 600 Carbon steel moderate 1 B 1.1 -20 150 soft

Page 1 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Class rating / Diameter range Material Sour PWHT Corr. Valve ASME Temperature Ball
Piping Piping PN ASME class service allow. FETC B16.5 Piping class where Tmin valve
class class barg 150 DN DN 300 DN DN 600 DN DN 900 DN DN 1500 DN DN 2500 DN DN >2500 (note 2) (note 13) mat. [°C] (note 14) is between seat
(old) max (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) group Min Max 0° and -20°C
use PC
PTS [Link] 1071 1071 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 200 Carbon steel moderate 1 B 1.1 0 400 1071-KS
PTS [Link] 1071-KS - 1 15 1200 3 15 1200 6 15 1200 9 15 1200 15 15 200 Carbon steel moderate 1 B 1.1 -20 340
PTS [Link] 1073 1073 1 15 1200 3 15 1200 6 15 1200 Carbon steel moderate 1 A(HS) 1.1 0 400
PTS [Link] 1076 1076 1 15 1200 3 15 600 6 15 600 9 15 600 15 15 600 25 15 500 Carbon steel moderate 3 B 1.1 0 400 1076-KS
PTS [Link] 1076-KS - 1 15 1200 3 15 600 6 15 600 9 15 600 15 15 600 25 15 500 Carbon steel moderate 3 B 1.1 -20 340

Page 2 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Class rating / Diameter range Material Sour PWHT Corr. Valve ASME Temperature Ball
Piping Piping PN ASME class service allow. FETC B16.5 Piping class where Tmin valve
class class barg 150 DN DN 300 DN DN 600 DN DN 900 DN DN 1500 DN DN 2500 DN DN >2500 (note 2) (note 13) mat. [°C] (note 14) is between seat
(old) max (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) group Min Max 0° and -20°C
use PC
PTS [Link] 1085 1172 1 15 1200 3 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1085 1172 1 15 1200 3 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1085 1172 1 15 1200 3 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1085 1172 1 15 1200 3 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1085 1172 1 15 1200 3 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1085 1172 1 15 1200 3 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1085 1172 1 15 1200 3 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1085 1172 1 15 1200 3 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1086 1173 1 15 600 3 15 600 Carbon steel LT fine grained moderate PWHT 1 B 1.1 -50 150 - soft
PTS [Link] 1087 1 15 1200 Carbon steel LT fine grained moderate 1 B 1.1 -50 150 - soft
PTS [Link] 1092 1091 1 25 300 3 25 300 Carbon steel 3 A(HS) 1.1 0 65 1092-KS soft
PTS [Link] 1092-KS - 1 15 300 3 15 300 Carbon steel 3 A(HS) 1.1 -20 150 soft
PTS [Link] 1141 1041 1 15 1200 3 15 1200 6 15 1200 Carbon steel moderate 1 A(HS) 1.1 0 400 1141-KS
PTS [Link] 1141-KS - 1 15 1200 3 15 1200 6 15 1200 Carbon steel moderate 1 A(HS) 1.1 -20 340
PTS [Link] 1142 1042 1 15 1200 3 15 1200 6 15 1200 Carbon steel moderate 3 A(HS) 1.1 0 400 1142-KS
PTS [Link] 1142-KS - 1 15 1200 3 15 1200 6 15 1200 Carbon steel moderate 3 A(HS) 1.1 -20 340
PTS [Link] 1160 1160 3 15 900 6 15 600 Carbon steel 1 A(HS) 1.1 0 410 -
PTS [Link] 1174 1174 1 15 1200 3 15 1200 6 15 1200 Carbon steel LT fine grained moderate PWHT 1 B 1.3 -50 340 -
PTS [Link] 1175 1175 1 15 1200 3 15 1200 Carbon steel LT fine grained high 1 B 1.3 -50 340 -
PTS [Link] 1176 1176 1 15 1200 3 15 1200 6 15 1200 9 15 1200 Carbon steel LT fine grained high 3 B 1.3 -50 340 -
PTS [Link] 1180 1180 1 15 1200 3 15 1200 6 15 1200 9 15 1200 Carbon steel LT fine grained moderate 1 B 1.3 -50 340 -
PTS [Link] 1180 1180 1 15 1200 3 15 1200 6 15 1200 9 15 1200 Carbon steel LT fine grained moderate 1 B 1.3 -50 340 -
PTS [Link] 1180 1180 1 15 1200 3 15 1200 6 15 1200 9 15 1200 Carbon steel LT fine grained moderate 1 B 1.3 -50 340 -
PTS [Link] 1180 1180 1 15 1200 3 15 1200 6 15 1200 9 15 1200 Carbon steel LT fine grained moderate 1 B 1.3 -50 340 -
PTS [Link] 1187 1 15 1200 Carbon steel LT fine grained moderate 1 A(HS) 1.1 -50 150 - soft
PTS [Link] 1201 1201 16.0 1 15 1200 Carbon steel 1 - 1.1 0 90 - soft

PTS [Link] 1201 1201 16.0 1 15 1200 Carbon steel 1 - 1.1 0 90 - soft

PTS [Link] 1210 1210 1 50 400 3 50 400 Carbon steel 3 B 1.1 0 200 -
PTS [Link] 1220 1220 1 15 400 Carbon steel 1 B 1.1 0 200 -

PTS [Link] 1261 1261 1 15 1200 3 15 1200 6 15 1200 9 15 600 15 15 400 Carbon steel 1 B 1.1 0 400 -

PTS [Link] 1271 1271 3 25 150 Carbon steel LT fine grained 1 A(HS) - -35 70 - soft
PTS [Link] 1301 1300 1 15 600 3 15 600 Carbon steel 1 A(HS) 1.1 0 200 1301-KS metal
PTS [Link] 1301-KS - 1 15 600 3 15 600 Carbon steel 1 A(HS) 1.1 -20 200 metal
PTS [Link] 1310 1310 3 15 300 Carbon steel LT fine grained PWHT 3 A(HS) - -15 200
PTS [Link] 1311 1310 3 15 300 Carbon steel LT fine grained PWHT 3 A(HS) - -15 200
PTS [Link] 1374 1374 1 15 1200 3 15 1200 6 15 1200 9 15 600 15 15 150 Carbon steel moderate PWHT 3 B 1.1 0 400 1374-KS
PTS [Link] 1374-KS - 1 15 1200 3 15 1200 6 15 1200 9 15 600 15 15 150 Carbon steel moderate PWHT 3 B 1.1 -20 340
PTS [Link] 1380 - 1 15 1200 3 15 1200 6 15 1200 9 15 1200 Carbon steel LT fine grained moderate 3 B 1.1 -50 340 -
PTS [Link] 1380 - 1 15 1200 3 15 1200 6 15 1200 9 15 1200 Carbon steel LT fine grained moderate 3 B 1.1 -50 340 -
PTS [Link] 1380 - 1 15 1200 3 15 1200 6 15 1200 9 15 1200 Carbon steel LT fine grained moderate 3 B 1.1 -50 340 -
PTS [Link] 1382 - 1 15 1200 Carbon steel LT fine grained moderate 3 B 1.1 -50 340 -
PTS [Link] 1384 - 1 15 600 3 15 600 6 15 900 Carbon steel LT fine grained moderate PWHT 3 B 1.1 -50 340 -
PTS [Link] 2010 2010 3 15 600 6 15 600 9 15 1200 15 15 300 Alloy steel (1.25Cr-0.5Mo) PWHT 1 B 1.9 -20 450 -
PTS [Link] 2011 2011 3 15 1200 6 15 1200 9 15 1200 Alloy steel (1.25Cr-0.5Mo) PWHT 1 B 1.9 -20 550 -
PTS [Link] 2020 2020 3 15 1200 6 15 600 9 15 1200 15 15 600 Alloy steel (1.25Cr-0.5Mo) 1 B 1.9 0 450 -

PTS [Link] 2021 2021 1 15 600 3 15 1200 6 15 600 9 15 1200 15 15 300 Alloy steel (1.25Cr-0.5Mo) 1 B 1.9 0 538 -

PTS [Link] 2040 2040 1 15 1200 3 15 1200 6 15 600 9 15 600 Alloy steel (5Cr-0.5Mo) PWHT 1 B 1.17 -20 450
PTS [Link] 2050 2050 25 15 300 Alloy steel (2.25Cr-1.0Mo) PWHT 1 B 1.10 0 538

PTS [Link] 2090 2090 1 15 1200 3 15 1200 6 15 600 9 15 600 15 15 300 Alloy steel (9Cr-1Mo) PWHT 1 B 1.14 -20 538/550
PTS [Link] 2110 2110 3 15 1200 6 15 1200 9 15 600 Alloy steel (1.25Cr-0.5Mo) PWHT 1 B 1.9 -20 400 -
PTS [Link] 2120 2120 3 15 1200 6 15 1200 9 15 1200 15 15 300 25 15 150 Alloy steel (1.25Cr-0.5Mo) PWHT 1 B 1.9 -20 500 -
PTS [Link] 2121 2121 3 15 1200 6 15 600 9 15 600 Alloy steel (1.25Cr-0.5Mo) PWHT 1 B 1.9 -20 550 -
PTS [Link] 3012 3011 1 15 1200 3 15 1200 6 15 1200 9 15 600 Stainless steel AISI 321/347 0 B 2.4 -20 400 -
PTS [Link] 3012 3011 1 15 1200 3 15 1200 6 15 1200 9 15 600 Stainless steel AISI 321/347 0 B 2.4 -20 400 -
PTS [Link] 3012 3011 1 15 1200 3 15 1200 6 15 1200 9 15 600 Stainless steel AISI 321/347 0 B 2.4 -20 400 -

PTS [Link] 3013 3012 1 15 1200 3 15 1200 6 15 1200 9 15 600 Stainless steel AISI 321/347 0 A(HS) 2.4 -20 400 -
PTS [Link] 3015 - 1 15 1200 3 15 1200 6 15 1200 9 15 600 Stainless steel AISI 321/347 0 B 2.4 -20 400 -
PTS [Link] 3017 9 15 600 Stainless steel AISI 321/347 0 A(HS) 2.5 -20 450 -
PTS [Link] 3018 9 15 600 Stainless steel AISI 321/347 0 B 2.5 -20 450 -
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 B 2.2 -20 400 -
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 B 2.2 -20 400 -
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 B 2.2 -20 400 -
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 B 2.2 -20 400 -
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 B 2.2 -20 400 -
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 B 2.2 -20 400 -
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 B 2.2 -20 400 -
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 - 2.2 -20 400 -

Page 3 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Class rating / Diameter range Material Sour PWHT Corr. Valve ASME Temperature Ball
Piping Piping PN ASME class service allow. FETC B16.5 Piping class where Tmin valve
class class barg 150 DN DN 300 DN DN 600 DN DN 900 DN DN 1500 DN DN 2500 DN DN >2500 (note 2) (note 13) mat. [°C] (note 14) is between seat
(old) max (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) group Min Max 0° and -20°C
use PC
PTS [Link] 3021 3021 1 15 1200 3 15 600 6 15 600 9 15 900 15 15 150 25 15 300 Stainless steel AISI 316 0 B 2.2 -20 400 -

PTS [Link] 3025 6 15 1200 Stainless steel AISI 304 LT 0 B 2.1 -200 200
PTS [Link] 3026 3 15 500 Stainless steel AISI 316 1 B 2.2 -20 450 -
PTS [Link] 3032 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 B 2.2 -20 150 - soft
PTS [Link] 3032 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 B 2.2 -20 150 - soft
PTS [Link] 3032 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 B 2.2 -20 150 - soft
PTS [Link] 3032 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 B 2.2 -20 150 - soft
PTS [Link] 3032 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 B 2.2 -20 150 - soft
PTS [Link] 3032 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 - 2.2 -20 150 - soft

PTS [Link] 3032 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 B 2.2 -20 150 - soft

PTS [Link] 3033 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 A(HS) 2.2 -20 150 - soft
PTS [Link] 3033 3031 1 15 600 3 15 600 Stainless steel AISI 316 0 A(HS) 2.2 -20 150 - soft
PTS [Link] 3052 3050 1 15 600 3 15 1200 6 15 600 9 15 600 15 15 100 Stainless steel AISI 321/347 0 B 2.4 -20 450 -
PTS [Link] 3055 3055 1 15 600 3 15 1200 6 15 1200 9 15 600 15 15 600 25 15 600 Stainless steel AISI 321 stab HT 0 B 2.4 -20 500/538 -
PTS [Link] 3055 3055 1 15 600 3 15 1200 6 15 1200 9 15 600 15 15 600 25 15 600 Stainless steel AISI 321 stab HT 0 B 2.4 -20 500/538 -
PTS [Link] 3060 3060 6 15 600 Stainless steel AISI 316 0 B 2.2 -20 400 -
PTS [Link] 3081 1 15 1200 3 15 1200 Stainless steel AISI 304 0 B 2.1 -20 150 - soft
PTS [Link] 3081 1 15 1200 3 15 1200 Stainless steel AISI 304 0 B 2.1 -20 150 - soft
PTS [Link] 3081 1 15 1200 3 15 1200 Stainless steel AISI 304 0 B 2.1 -20 150 - soft
PTS [Link] 3081 1 15 1200 3 15 1200 Stainless steel AISI 304 0 B 2.1 -20 150 - soft
PTS [Link] 3081 1 15 1200 3 15 1200 Stainless steel AISI 304 0 B 2.1 -20 150 - soft
PTS [Link] 3081 1 15 1200 3 15 1200 Stainless steel AISI 304 0 - 2.1 -20 150 - soft

PTS [Link] 3081 1 15 1200 3 15 1200 Stainless steel AISI 304 0 B 2.1 -20 150 - soft

PTS [Link] 3083 1 15 1200 3 15 1200 Stainless steel AISI 304 0 A(HS) 2.1 -20 150 - soft
PTS [Link] 3083 1 15 1200 3 15 1200 Stainless steel AISI 304 0 A(HS) 2.1 -20 150 - soft
PTS [Link] 3084 6 15 1200 Stainless steel AISI 304 0 B 2.1 -20 400 -
PTS [Link] 3085 1 15 600 3 15 600 Stainless steel AISI 304 0 A(HS) 2.1 -20 150 - metal
PTS [Link] 3085 1 15 600 3 15 600 Stainless steel AISI 304 0 A(HS) 2.1 -20 150 - metal
PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 B 2.1 -20 400 -
PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 B 2.1 -20 400 -
PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 B 2.1 -20 400 -
PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 B 2.1 -20 400 -
PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 B 2.1 -20 400 -
PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 B 2.1 -20 400 -
PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 B 2.1 -20 400 -
PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 - 2.1 -20 400 -

PTS [Link] 3086 1 15 1200 3 15 1200 6 15 1200 9 15 900 15 15 150 25 15 300 Stainless steel AISI 304 0 B 2.1 -20 400 -

PTS [Link] 3092 3091 1 15 1200 3 15 1200 Stainless steel AISI 304 LT 0 B 2.1 -200 150 - soft
PTS [Link] 3092 3091 1 15 1200 3 15 1200 Stainless steel AISI 304 LT 0 B 2.1 -200 150 - soft
PTS [Link] 3092 3091 1 15 1200 3 15 1200 Stainless steel AISI 304 LT 0 B 2.1 -200 150 - soft
PTS [Link] 3092 3091 1 15 1200 3 15 1200 Stainless steel AISI 304 LT 0 B 2.1 -200 150 - soft

PTS [Link] 3092 3091 1 15 1200 3 15 1200 Stainless steel AISI 304 LT 0 B 2.1 -200 150 - soft
PTS [Link] 3095 3090 1 15 1200 3 15 1200 6 15 1200 9 15 750 Stainless steel AISI 304 LT 0 B 2.1 -200 200 -
PTS [Link] 3095 3090 1 15 1200 3 15 1200 6 15 1200 9 15 750 Stainless steel AISI 304 LT 0 B 2.1 -200 200 -
PTS [Link] 3095 3090 1 15 1200 3 15 1200 6 15 1200 9 15 750 Stainless steel AISI 304 LT 0 B 2.1 -200 200 -
PTS [Link] 3095 3090 1 15 1200 3 15 1200 6 15 1200 9 15 750 Stainless steel AISI 304 LT 0 B 2.1 -200 200 -

PTS [Link] 3095 3090 1 15 1200 3 15 1200 6 15 1200 9 15 750 Stainless steel AISI 304 LT 0 B 2.1 -200 200 -
PTS [Link] 3096 6 15 1200 Stainless steel AISI 304 LT 0 A(HS) 2.1 -200 200 -
PTS [Link] 3101 3100 1 15 600 3 15 300 Stainless steel AISI 316 0 A(HS) 2.2 -20 150 - metal
PTS [Link] 3101 3100 1 15 600 3 15 300 Stainless steel AISI 316 0 A(HS) 2.2 -20 150 - metal
PTS [Link] 3191 3091 1 15 600 3 15 600 Stainless steel AISI 304 LT 0 A(HS) 2.1 -200 150 - soft
PTS [Link] 3200 - 6 50 900 Stainless steel AISI 321/347 0 A(HS) 2.4 -20 100 -
PTS [Link] 3210 - 6 50 300 Stainless steel AISI 321/347 0 A(HS) 2.4 -20 300 -
PTS [Link] 6022 6021 1 15 200 Alloy 400 0 A(HS) 3.4 -20 150 - soft
PTS [Link] 6072 6071 1 15 200 3 15 150 Alloy B2 0 A(HS) 2.2 -20 150 - soft
PTS [Link] 6080 3 20 200 Alloy 400 PWHT 1 A(HS) 3.4 -20 200 -
PTS [Link] 6081 6080 3 20 200 Alloy 400 PWHT 3 A(HS) 3.4 -20 200 -
PTS [Link] 7011 7011 10.0 1 25 600 GRE Aromatic amine - - - 0 100 - soft

PTS [Link] 7011 7011 10.0 1 25 600 GRE Aromatic amine - - - 0 100 - soft

PTS [Link] 7012 7012 10.0 1 25 900 GRVE Bisphenol A - - - 0 80 - soft

PTS [Link] 7015 7015 10.0 1 25 300 GRE Aliphatic amine+aluminium foil - - - 0 85 - soft

Page 4 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Class rating / Diameter range Material Sour PWHT Corr. Valve ASME Temperature Ball
Piping Piping PN ASME class service allow. FETC B16.5 Piping class where Tmin valve
class class barg 150 DN DN 300 DN DN 600 DN DN 900 DN DN 1500 DN DN 2500 DN DN >2500 (note 2) (note 13) mat. [°C] (note 14) is between seat
(old) max (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) (min) (max) group Min Max 0° and -20°C
use PC
PTS [Link] 7102 7102 16.0 1 25 600 GRVE Bisphenol A - - - 0 80 - soft

PTS [Link] 7102 7102 16.0 1 25 600 GRVE Bisphenol A - - - 0 80 - soft

PTS [Link] 7112 7012 10.0 1 25 600 GRVE Bisphenol A - A(HS) - 0 80 - soft
PTS [Link] 7122 7121 16.0 1 25 1200 GRVE Bisphenol A - - - -5 80 - soft

PTS [Link] 7130 7130 10.0 1 100 1200 GRVE Bisphenol A - - - -5 80 -

PTS [Link] 7201 7201 10.0 1 25 600 GRVE Novolac epoxy - A(HS) - 0 80 - soft
PTS [Link] 7311 7311 10.0 1 100 600 GRUP Isophthalic - - - 0 60 -

PTS [Link] 7320 7320 10.0 1 25 1200 GRUP Isophthalic - - - -5 60 -

PTS [Link] 8011 8011 16.0 1 15 250 Carbon steel Galvanised 0 - 1.1 0 90 - soft

PTS [Link] 8160 8160 10.0 1 25 200 Carbon steel PTFE-lined - A(HS) 1.1 -20 150 - soft

Page 5 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Service
PTS PTS PTS Medium Properties Remarks Notes Short Chemical CAS RN EU Dangerous Substances Directive Danger Classification Experience
Piping Piping name formula (see note 5) (for explanation see tab "Dangerous substances") Very Toxic temperature
class class C E F/F+ N O T/T+ Xi Xn Carci Muta Substance [°C] (note 15)
(old) nogen gen (See Note 13) Min Max

PTS [Link] 1000 1011 Benzene C6H6 71-43-2 F T Xi Xn R45 R46 Yes > 150
PTS [Link] 1001 1021 Air instrument, tool - No 0 50

PTS [Link] 1001 1021 Butane gas C4H10 106-97-8 F+ No 0 60

PTS [Link] 1001 1021 Butene (Butylene) gas C4H8 25167-67-3 F+ No
PTS [Link] 1001 1021 Butanol C4H10O 71-36-3 Xi Xn No 0 200
PTS [Link] 1001 1021 Diethylene glycol all concentrations, dry DEG C4H10O3 111-46-6 Xn No 0 150
PTS [Link] 1001 1021 Ethanol anhydrous C2H6O 64-17-5 F No 0 100
PTS [Link] 1001 1021 Hydrocarbons non corrosive, not corrosion inhibited 9,12 - No 0 200
PTS [Link] 1001 1021 Isobutanol finished product C4H10O 78-83-1 Xi No 0 100
PTS [Link] 1001 1021 Isopropyl alcohol IPA C3H8O 67-63-0 F Xi No 0 100
PTS [Link] 1001 1021 Nitrogen N2 7727-37-9 No 0 200

PTS [Link] 1001 1021 Polyols unfinished neutral product - No 0 150

PTS [Link] 1001 1021 Propane gas C3H8 74-98-6 F+ No 0 200
PTS [Link] 1001 1021 Butanol (Sec-butyl alcohol) liquid SBA C4H10O 78-92-2 Xi No 0 200
PTS [Link] 1001-20 No
PTS [Link] 1001-KS No
PTS [Link] 1002 1021 Benzene C6H6 71-43-2 F T Xi Xn R45 R46 Yes 0 85
PTS [Link] 1002 1021 1,3-Butadiene gas C4H6 106-99-0 F+ R45 R46 Yes 0 35
PTS [Link] 1002 1021 Hydrochloric acid (Hydrogen chloride) gas, dry HCl 7647-01-0 C T Yes 0 100
PTS [Link] 1002 1021 Phenol C6H6O 108-95-2 C T Xn R68 Yes 0 200
PTS [Link] 1002-KS Yes
PTS [Link] 1003 1373 Sodium hydroxide (Caustic soda) >= 2%; area A - without tracing see DEP [Link]-Gen - Appendix 10 8 NaOH 1310-73-2 C Yes
PTS [Link] 1003-KS Yes
PTS [Link] 1005 1023 Amine lean solvent 7 - No 0 80
PTS [Link] 1007 1372 Amine rich solvent CO2 case 7 - No 0 95
PTS [Link] 1007 1372 Amine rich solvent H2S case 7 - No 0 110
PTS [Link] 1007 1372 Amine lean solvent 7 - No 0 130
PTS [Link] 1007-20 No
PTS [Link] 1008 1372 Sodium hydroxide (Caustic soda) >= 2%; area A - with tracing; area B see DEP [Link]-Gen - Appendix 10 8 NaOH 1310-73-2 C Yes
PTS [Link] 1008-KS Yes
PTS [Link] 1009 1372 Sodium hydroxide (Caustic soda) >= 2%; area A - with tracing; area B see DEP [Link]-Gen - Appendix 10 8 NaOH 1310-73-2 C Yes
PTS [Link] 1011 1011 Acetone + water 21 DMK C3H6O 67-64-1 F No 0 100
PTS [Link] 1011 1011 Acetonitrile 21 C2H3N 75-05-8 F Xn No 0 130
PTS [Link] 1011 1011 Air instrument, tool - - No 0 50

PTS [Link] 1011 1011 Butanol C4H10O 71-36-3 Xi Xn No 0 200

PTS [Link] 1011 1011 Butanol (Sec-butyl alcohol) liquid SBA C4H10O 78-92-2 Xi No 0 200
PTS [Link] 1011 1011 Carbon dioxide dry CO2 124-38-9 No 0 350
PTS [Link] 1011 1011 Condensate (ex-steam) non aerated - No 0 250
PTS [Link] 1011 1011 Diethylene glycol all concentrations, dry DEG C4H10O3 111-46-6 Xn No 0 150
PTS [Link] 1011 1011 Ethanol anhydrous C2H6O 64-17-5 F No 0 100
PTS [Link] 1011 1011 Hydrocarbons non corrosive 3,9,12 - No 0 200
PTS [Link] 1011 1011 Hydrocarbons non corrosive 3,9,12 - No 0 330
PTS [Link] 1011 1011 Hydrocarbons with sulfur and/or naphthenic acids 9 - No 0 240
PTS [Link] 1011 1011 Isobutanol finished product C4H10O 78-83-1 Xi No 0 100
PTS [Link] 1011 1011 Isopropyl alcohol IPA C3H8O 67-63-0 F Xi No 0 100
PTS [Link] 1011 1011 Methanol (Methyl alcohol) 21 CH4O 67-56-1 F T No 0 100
PTS [Link] 1011 1011 Butanone (Methyl ethyl ketone) 21 MEK C4H8O 78-93-3 F Xi No 0 100
PTS [Link] 1011 1011 Nitrogen gas N2 7727-37-9 No 0 340

PTS [Link] 1011 1011 Polyols unfinished neutral product - No 0 150

PTS [Link] 1011 1011 Sulphur trioxide gas, dry SO3 7446-11-9 No 0 340
PTS [Link] 1011 1011 Water, boiler feed treated non corrosive BFW - - 0 250

PTS [Link] 1011-20 - No

PTS [Link] 1012 1012 see 1011 No
PTS [Link] 1012-20 - No
PTS [Link] 1013 1013 Amine lean solvent 7 - No 0 80
PTS [Link] 1013-20 - No
PTS [Link] 1014 2080 Hydrocarbons non corrosive 9,12 - No 0 425
PTS [Link] 1015 1015 Hydrocarbons with wet H2S 9,16 - No 0 200
PTS [Link] 1015-KS - No
PTS [Link] 1026 1025 Carbon slurry +H2S + CO2 + carbon particles - No
PTS [Link] 1026-KS - No
PTS [Link] 1031 1031 - - No
PTS [Link] 1031-KS - No
PTS [Link] 1035 1125 Hydrocarbons with wet H2S 9,16 - No 0 150
PTS [Link] 1035-KS - No
PTS [Link] 1036 1126 Water, sour with high severity HIC - No 0 150
PTS [Link] 1036-KS - No
PTS [Link] 1041 1041 Hydrocarbons with wet H2S 2,9,16 - No 0 200
PTS [Link] 1041-20 - No
PTS [Link] 1042 1042 Hydrocarbons with wet H2S 2,9,16 - No 0 200
PTS [Link] 1042 1042 Hydrocarbons with sulfur and/or naphthenic acids corrosion rate must be checked 6,9 - No 240 330
PTS [Link] 1042 1042 Water, sour with wet H2S 16 - No 0 200
PTS [Link] 1042-20 - No
PTS [Link] 1055 1055 Water, sour with high severity HIC - No 0 200
PTS [Link] 1055-20 - No
PTS [Link] 1061 1131 Hydrogen with or without wet H2S check API 941 for pressure/temperature limit 2,16 H2 1333-74-0 F+ No 0 200
PTS [Link] 1061-KS - No

Page 6 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Service
PTS PTS PTS Medium Properties Remarks Notes Short Chemical CAS RN EU Dangerous Substances Directive Danger Classification Experience
Piping Piping name formula (see note 5) (for explanation see tab "Dangerous substances") Very Toxic temperature
class class C E F/F+ N O T/T+ Xi Xn Carci Muta Substance [°C] (note 15)
(old) nogen gen (See Note 13) Min Max

PTS [Link] 1071 1071 Hydrogen with or without wet H2S check API 941 for pressure/temperature limit 2,16 H2 1333-74-0 F+ No 0 230
PTS [Link] 1071-KS - No
PTS [Link] 1073 1073 Hydrocarbons + hydrogen with or without wet H2S; > 1% benzene 2 C M Yes 0 230
PTS [Link] 1076 1076 Hydrogen with or without wet H2S check API 941 for pressure/temperature limit 2,16 H2 1333-74-0 F+ No 0 230
PTS [Link] 1076-KS - No

Page 7 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Service
PTS PTS PTS Medium Properties Remarks Notes Short Chemical CAS RN EU Dangerous Substances Directive Danger Classification Experience
Piping Piping name formula (see note 5) (for explanation see tab "Dangerous substances") Very Toxic temperature
class class C E F/F+ N O T/T+ Xi Xn Carci Muta Substance [°C] (note 15)
(old) nogen gen (See Note 13) Min Max

PTS [Link] 1085 1172 Butane liquid 4 C4H10 106-97-8 F+ No -50 50

PTS [Link] 1085 1172 Butene (Butylene) liquified gas 4 C4H8 25167-67-3 F+ No
PTS [Link] 1085 1172 Coolant 60% H2O + 40% Methanol 4 - No -50 50
PTS [Link] 1085 1172 Ethylene (Ethene) 4 C2H4 74-85-1 F+ No -50 150
PTS [Link] 1085 1172 Hydrocarbons with or without wet H2S 4,9,16 - No -50 150
PTS [Link] 1085 1172 Methanol (Methyl alcohol) 4 CH4O 67-56-1 F T No -50 150
PTS [Link] 1085 1172 Propane gas/liquified gas 4 C3H8 74-98-6 F+ No -50
PTS [Link] 1085 1172 Propene (Propylene) 4 C3H6 115-07-1 F+ No -48 150
PTS [Link] 1086 1173 - 4 - No
PTS [Link] 1087 Hydrocarbons with or without wet H2S 4,9,16 No -20 150
PTS [Link] 1092 1091 Sulphuric acid > 65% wt see DEP [Link]-Gen - Appendix 10 8 H2SO4 7664-93-9 C Yes 0 40
PTS [Link] 1092-KS - Yes
PTS [Link] 1141 1041 Hydrogen sulphide gas, dry 2 H2S 7783-06-4 F+ N® T+ Yes 0 200
PTS [Link] 1141-KS - Yes
PTS [Link] 1142 1042 Hydrogen sulphide gas, dry 2 H2S 7783-06-4 F+ N® T+ Yes 0 200
PTS [Link] 1142-KS - Yes
PTS [Link] 1160 1160 Heat transfer fluid see DEP [Link]-Gen. - No 0 400
PTS [Link] 1174 1174 - 4 - No
PTS [Link] 1175 1175 Hydrocarbons with or without wet H2S 2,4,9,16 - No -50 150
PTS [Link] 1176 1176 Hydrocarbons with or without wet H2S 2,4,9,16 - No -50 150
PTS [Link] 1180 1180 Coolant 60% H2O + 40% Methanol 4 - No -50 50
PTS [Link] 1180 1180 Ethylene (Ethene) 4 C2H4 74-85-1 F+ No -50 150
PTS [Link] 1180 1180 Hydrocarbons with or without wet H2S 4,9,16 - No -50 150
PTS [Link] 1180 1180 Propene (Propylene) 4 C3H6 115-07-1 F+ No -48 150
PTS [Link] 1187 Hydrocarbons with or without wet H2S 4,9,16 Yes -20 150
PTS [Link] 1201 1201 Water, cooling fresh - - 0 50

PTS [Link] 1201 1201 Water, fire fighting fresh check oxygen and corrosion rate/life 11 - - 0 50

PTS [Link] 1210 1210 Sulfur jacketed; inner pipe S 7704-34-9 No 130 150
PTS [Link] 1220 1220 Steam saturated jacketed; outer pipe - No 150 200

PTS [Link] 1261 1261 Steam saturated, superheated - No 0 400

PTS [Link] 1271 1271 Chlorine gas/liquid, dry see DEP [Link]-Gen - Appendix 10 4 Cl2 7782-50-5 N® T Yes -35 70
PTS [Link] 1301 1300 Ethylene oxide EO C2H4O 75-21-8 F+ T Xi R45 R46 Yes 0 50
PTS [Link] 1301-KS - Yes
PTS [Link] 1310 1310 Hydrogen fluoride (Hydrofluoric acid) Any mixture of HF and hydrocarbons, with a concentration of free HF above 2%, and operating below 65 °C see DEP [Link]-Gen - Appendix 10 8 HF HF 7664-39-3 C T+ Yes 0 150
PTS [Link] 1311 1310 Hydrogen fluoride (Hydrofluoric acid) Any mixture of HF and hydrocarbons, with a concentration of free HF below 2%, and operating below 220 °C see DEP [Link]-Gen - Appendix 10 8 HF HF 7664-39-3 C T+ Yes 0 150
PTS [Link] 1374 1374 Amine rich solvent 7 - No 0 95
PTS [Link] 1374-KS - No
PTS [Link] 1380 - Coolant 60% H2O + 40% Methanol 4 - No -50 50
PTS [Link] 1380 - Hydrocarbons with or without wet H2S 4,9,16 - No -50 150
PTS [Link] 1380 - Propene (Propylene) 4 C3H6 115-07-1 F+ No -48 150
PTS [Link] 1382 - Hydrocarbons with or without wet H2S 4,9,16 - No -50 150
PTS [Link] 1384 - - 4 - No
PTS [Link] 2010 2010 Hydrocarbons 9 - No
PTS [Link] 2011 2011 Hydrocarbons 9 - No
PTS [Link] 2020 2020 Steam superheated - No 400 450

PTS [Link] 2021 2021 Steam superheated - No 400 538

PTS [Link] 2040 2040 Hydrocarbons with sulfur and/or naphthenic acids corrosion rate must be checked 6,9 - No 240 450
PTS [Link] 2050 2050 Steam superheated - No 400 538

PTS [Link] 2090 2090 Hydrocarbons with sulfur and/or naphthenic acids corrosion rate must be checked 6,9 - No 240 525
PTS [Link] 2110 2110 Hydrogen check API 941 for pressure/temperature limit 8 H2 1333-74-0 F+ No 230 400
PTS [Link] 2120 2120 Hydrogen check API 941 for pressure/temperature limit 8 H2 1333-74-0 F+ No 230 450
PTS [Link] 2121 2121 Hydrogen check API 941 for pressure/temperature limit 8 H2 1333-74-0 F+ No 500 550
PTS [Link] 3012 3011 Lubricating oil to prevent product contamination - No 0 200
PTS [Link] 3012 3011 Seal oil to prevent product contamination - No 0 200
PTS [Link] 3012 3011 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3013 3012 Seal gas > 1% benzene R45 R46 Yes
PTS [Link] 3015 - Hydrogen 8 H2 1333-74-0 F+ No 0 400
PTS [Link] 3017 Hydrocarbons + hydrogen with H2S < 6-10 bar partial pressure H2S 8 F+ N® T+ Yes 0 425
PTS [Link] 3018 Hydrogen with H2S 8 H2 1333-74-0 F+ No 0 425
PTS [Link] 3021 3021 Amine lean and rich solvent use where CS is inadequate 7 No 0 140
PTS [Link] 3021 3021 Carbon dioxide wet 21 CO2 124-38-9 No 0 100
PTS [Link] 3021 3021 Diethylene glycol to prevent product contamination DEG C4H10O3 111-46-6 Xn No 0 150
PTS [Link] 3021 3021 Foam, fire fighting concentrated solution DN 15-80 - No 0 50
PTS [Link] 3021 3021 Lubricating oil to prevent product contamination - No 0 200
PTS [Link] 3021 3021 Seal oil to prevent product contamination - No 0 200
PTS [Link] 3021 3021 Polyols acidic or alkaline - No 0 200
PTS [Link] 3021 3021 Water, boiler feed demineralised aerated BFW - - 0 150

Page 8 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Service
PTS PTS PTS Medium Properties Remarks Notes Short Chemical CAS RN EU Dangerous Substances Directive Danger Classification Experience
Piping Piping name formula (see note 5) (for explanation see tab "Dangerous substances") Very Toxic temperature
class class C E F/F+ N O T/T+ Xi Xn Carci Muta Substance [°C] (note 15)
(old) nogen gen (See Note 13) Min Max

PTS [Link] 3021 3021 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3025 Hydrogen H2 1333-74-0 F+ No -200 200

PTS [Link] 3026 Short residu, wash oil and dirty wash oil - No 0 370
PTS [Link] 3032 3031 Diethylene glycol to prevent product contamination DEG C4H10O3 111-46-6 Xn No 0 150
PTS [Link] 3032 3031 Foam, fire fighting concentrated solution DN 15-80 - No 0 50
PTS [Link] 3032 3031 Lubricating oil to prevent product contamination - No 0 200
PTS [Link] 3032 3031 Seal oil to prevent product contamination - No 0 200
PTS [Link] 3032 3031 Polyols acidic or alkaline - No 0 200
PTS [Link] 3032 3031 Water, boiler feed demineralised aerated BFW - - 0 150

PTS [Link] 3032 3031 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3033 3031 Acetic acid all concentrations C2H4O2 64-19-7 C Yes 0 100
PTS [Link] 3033 3031 Phenol to prevent product contamination C6H6O 108-95-2 C T Xn R68 Yes 0 150
PTS [Link] 3052 3050 Hydrocarbons 9 - No 0 450
PTS [Link] 3055 3055 Hydrocarbons with H2 9 - No 230 538
PTS [Link] 3055 3055 Hydrogen 8 H2 1333-74-0 F+ No 230 538
PTS [Link] 3060 3060 Hydrocarbons wet; with H2 9 - No 0 400
PTS [Link] 3081 Diethylene glycol to prevent product contamination DEG C4H10O3 111-46-6 Xn No 0 150
PTS [Link] 3081 Foam, fire fighting concentrated solution DN 15-80 - No 0 50
PTS [Link] 3081 Lubricating oil to prevent product contamination - No 0 200
PTS [Link] 3081 Seal oil to prevent product contamination - No 0 200
PTS [Link] 3081 Polyols acidic or alkaline - No 0 200
PTS [Link] 3081 Water, boiler feed demineralised aerated BFW - - 0 150

PTS [Link] 3081 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3083 Acetic acid all concentrations C2H4O2 64-19-7 C Yes 0 100
PTS [Link] 3083 Phenol to prevent product contamination C6H6O 108-95-2 C T Xn R68 Yes 0 150
PTS [Link] 3084 Hydrocarbons wet; with H2 9 - No 0 400
PTS [Link] 3085 Ethylene oxide CO2, water EO C2H4O 75-21-8 F+ T Xi R45 R46 Yes 0 150
PTS [Link] 3085 Ethylene oxide EO C2H4O 75-21-8 F+ T Xi R45 R46 Yes 0 200
PTS [Link] 3086 Amine lean and rich solvent use where CS is inadequate 7 No 0 140
PTS [Link] 3086 Carbon dioxide wet 21 CO2 124-38-9 No 0 100
PTS [Link] 3086 Diethylene glycol to prevent product contamination DEG C4H10O3 111-46-6 Xn No 0 150
PTS [Link] 3086 Foam, fire fighting concentrated solution DN 15-80 - No 0 50
PTS [Link] 3086 Lubricating oil to prevent product contamination - No 0 200
PTS [Link] 3086 Seal oil to prevent product contamination - No 0 200
PTS [Link] 3086 Polyols acidic or alkaline - No 0 200
PTS [Link] 3086 Water, boiler feed demineralised aerated BFW - - 0 150

PTS [Link] 3086 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3092 3091 Ethane 4 C2H6 74-84-0 F+ No -90 150

PTS [Link] 3092 3091 Ethylene (Ethene) 4 C2H4 74-85-1 F+ No -140 150
PTS [Link] 3092 3091 Methane liquid 4 CH4 74-82-8 F+ No -200 150
PTS [Link] 3092 3091 Nitrogen liquid 4 N2 7727-37-9 No -200 150

PTS [Link] 3092 3091 Propene (Propylene) liquid 4 C3H6 115-07-1 F+ No -100 150
PTS [Link] 3095 3090 Ethane 4 C2H6 74-84-0 F+ No -90 150
PTS [Link] 3095 3090 Ethylene (Ethene) 4 C2H4 74-85-1 F+ No -140 150
PTS [Link] 3095 3090 Methane liquid 4 CH4 74-82-8 F+ No -200 150
PTS [Link] 3095 3090 Nitrogen liquid 4 N2 7727-37-9 No -200 150

PTS [Link] 3095 3090 Propene (Propylene) liquid 4 C3H6 115-07-1 F+ No -100 150
PTS [Link] 3096 Hydrocarbons + benzene or butadiene 9 Yes -200 200
PTS [Link] 3101 3100 Ethylene oxide CO2, water EO C2H4O 75-21-8 F+ T Xi R45 R46 Yes 0 150
PTS [Link] 3101 3100 Ethylene oxide EO C2H4O 75-21-8 F+ T Xi R45 R46 Yes 0 200
PTS [Link] 3191 3091 Ammonia aqueous; >= 25% solution 4 NH4OH 1336-21-6 C N® Yes
PTS [Link] 3200 - Oxygen see DEP [Link]-Gen. O2 7782-44-7 O No 0 100
PTS [Link] 3210 - Oxygen see DEP [Link]-Gen. O2 7782-44-7 O No 0 300
PTS [Link] 6022 6021 Sodium hydroxide (Caustic soda) >= 2%; area C see DEP [Link]-Gen - Appendix 10 8 NaOH 1310-73-2 C Yes 0 150
PTS [Link] 6072 6071 Hydrochloric acid (Hydrogen chloride) anhydrous 8 HCl 7647-01-0 C Xi Yes 0 200
PTS [Link] 6080 Hydrogen fluoride (Hydrofluoric acid) Withdrawn and replaced with PC 6081 8 HF HF 7664-39-3 C T+ Yes 0 200
PTS [Link] 6081 6080 Hydrogen fluoride (Hydrofluoric acid) Free HF > 2%; temp. > 65 °C to 149 °C see DEP [Link]-Gen - Appendix 10 8 HF HF 7664-39-3 C T+ Yes 0 200
PTS [Link] 7011 7011 Water, boiler feed demineralised aerated 10 BFW - - 0 90

PTS [Link] 7011 7011 Water, demineralised 10 H2O 7732-18-5 - 0 80

PTS [Link] 7012 7012 Water, potable for above ground systems only 10 H2O 7732-18-5 - 0 40

PTS [Link] 7015 7015 Water, potable for underground systems only 10 H2O 7732-18-5 - 0 40

Page 9 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Service
PTS PTS PTS Medium Properties Remarks Notes Short Chemical CAS RN EU Dangerous Substances Directive Danger Classification Experience
Piping Piping name formula (see note 5) (for explanation see tab "Dangerous substances") Very Toxic temperature
class class C E F/F+ N O T/T+ Xi Xn Carci Muta Substance [°C] (note 15)
(old) nogen gen (See Note 13) Min Max

PTS [Link] 7102 7102 Foam, fire fighting concentrated solution 10 - - 0 50

PTS [Link] 7102 7102 Water, fire fighting fresh 10,11 - - 0 50

PTS [Link] 7102 7102 Water, fire fighting dry and wet systems for above ground systems only 10,11 - - 0 50

PTS [Link] 7112 7012 Hydrochloric acid (Hydrogen chloride) gas, wet 10 HCl 7647-01-0 C T Yes 0 50
PTS [Link] 7122 7121 Water, fire fighting brackish-/seawater 10,11 - - -5 50

PTS [Link] 7130 7130 Water, cooling brackish-/seawater 10 - - -5 80

PTS [Link] 7201 7201 Hydrochloric acid (Hydrogen chloride) anhydrous; concentration <20% 10 HCl 7647-01-0 C Yes 0 80
PTS [Link] 7311 7311 Water, cooling fresh 10 - - 0 50

PTS [Link] 7320 7320 Water, cooling brackish-/seawater 10 - - -5 60

PTS [Link] 7320 7320 Water, cooling chlorinated seawater 10 - - -5 60

PTS [Link] 7320 7320 Water, washdown brackish-/seawater 10 - - -5 60

PTS [Link] 8011 8011 Water, fire fighting brackish-/seawater for above ground systems only 11, 19 - - 0 50

PTS [Link] 8011 8011 Water, fire fighting dry and wet systems for above ground systems only 11 - - 0 50

PTS [Link] 8160 8160 Sulphuric acid all concentrations see DEP [Link]-Gen - Appendix 10 8 H2SO4 7664-93-9 C Yes 0 65

Page 10 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS
Piping Piping
Fluid Category
class class
(note 23)
(old)

Page 11 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS
Piping Piping
Fluid Category
class class
(note 23)
(old)

PTS [Link] 1071 1071 Category - N

PTS [Link] 1071-KS - Category - N
PTS [Link] 1073 1073 Category - M
PTS [Link] 1076 1076 Category - N
PTS [Link] 1076-KS - Category - N

Page 12 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS
Piping Piping
Fluid Category
class class
(note 23)
(old)

Page 13 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS
Piping Piping
Fluid Category
class class
(note 23)
(old)

Page 14 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS
Piping Piping
Fluid Category
class class
(note 23)
(old)

Page 15 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Material specification
PTS PTS PTS Pipe Fittings
Piping Piping seamless sml wld welded seamless seamless welded welded
class class ASTM ASTM API ASTM ASTM ASTM ASTM ASTM ASTM
(old)

PTS [Link] 1000 1011 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - - -

PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -

PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -

PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -

PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1001-20 A106-B - 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1001-KS - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1002 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - - -
PTS [Link] 1002 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - - -
PTS [Link] 1002 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - - -
PTS [Link] 1002 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - - -
PTS [Link] 1002-KS - A333-6 - A672-C65 cl 22 - - A420-WPL6 - -
PTS [Link] 1003 1373 A106-B - - - - A234-WPB - - -
PTS [Link] 1003-KS - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1005 1023 A106-B - - - - A234-WPB - - -
PTS [Link] 1007 1372 A106-B - - - - A234-WPB - - -
PTS [Link] 1007 1372 A106-B - - - - A234-WPB - - -
PTS [Link] 1007 1372 A106-B - - - - A234-WPB - - -
PTS [Link] 1007-20 A106-B A333-6 - - - A234-WPB A420-WPL6 - -
PTS [Link] 1008 1372 A106-B - - - - A234-WPB - - -
PTS [Link] 1008-KS - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1009 1372 A106-B - - - - A234-WPB - - -
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W

PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1011 1011 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W

PTS [Link] 1011-20 - A106-B A333-6 5L-B - A671-CC65 cl 22 A234-WPB A420-WPL6 - A420-WPL6W
PTS [Link] 1012 1012 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -
PTS [Link] 1012-20 - A106-B - 5L-B - A671-CC65 cl 22 A234-WPB A420-WPL6 - A420-WPL6W
PTS [Link] 1013 1013 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1013-20 - A106-B A333-6 - - A671-CC65 cl 22 A234-WPB A420-WPL6 - A420-WPL6W
PTS [Link] 1014 2080 A106-B - A672-C65 cl 22 - A234-WPB - - -
PTS [Link] 1015 1015 A106-B A333-6 - A672-C65 cl 22 - A234-WPB A420-WPL6 A234-WPBW -
PTS [Link] 1015-KS - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1026 1025 A106-B - - - - A234-WPB - - -
PTS [Link] 1026-KS - - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1031 1031 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1031-KS - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1035 1125 A106-B - - - - A234-WPB - - -
PTS [Link] 1035-KS - - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1036 1126 A106-B - - - - A234-WPB - - -
PTS [Link] 1036-KS - - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1041 1041 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1041-20 - A106-B A333-6 - - A671-CC65 cl 22 A234-WPB A420-WPL6 - A420-WPL6W
PTS [Link] 1042 1042 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1042 1042 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1042 1042 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1042-20 - A106-B A333-6 - - A671-CC65 cl 22 A234-WPB A420-WPL6 - A420-WPL6W
PTS [Link] 1055 1055 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1055-20 - A106-B A333-6 - - A671-CC65 cl 22 A234-WPB A420-WPL6 - A420-WPL6W
PTS [Link] 1061 1131 A106-B - - - - A234-WPB - - -
PTS [Link] 1061-KS - - A333-6 - - - - A420-WPL6 - -

Page 16 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Material specification
PTS PTS PTS Pipe Fittings
Piping Piping seamless sml wld welded seamless seamless welded welded
class class ASTM ASTM API ASTM ASTM ASTM ASTM ASTM ASTM
(old)

PTS [Link] 1071 1071 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1071-KS - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1073 1073 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1076 1076 A106-B A333-6 - A672-C65 cl 22 - A234-WPB A420-WPL6 A234-WPBW -
PTS [Link] 1076-KS - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W

Page 17 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Material specification
PTS PTS PTS Pipe Fittings
Piping Piping seamless sml wld welded seamless seamless welded welded
class class ASTM ASTM API ASTM ASTM ASTM ASTM ASTM ASTM
(old)

PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W

PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1086 1173 - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1087 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1092 1091 A106-B - - - - A234-WPB - - -
PTS [Link] 1092-KS - - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1141 1041 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1141-KS - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1142 1042 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1142-KS - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1160 1160 A106-B A333-6 - A672-C65 cl 22 - A234-WPB A420-WPL6 A234-WPBW -
PTS [Link] 1174 1174 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1175 1175 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1176 1176 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1180 1180 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1180 1180 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1180 1180 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1180 1180 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1187 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1201 1201 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -

PTS [Link] 1201 1201 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -

PTS [Link] 1210 1210 A106-B - - - - A234-WPB - - -

PTS [Link] 1220 1220 A106-B - - - - A234-WPB - - -

PTS [Link] 1261 1261 A106-B A333-6 5L-B A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W

PTS [Link] 1271 1271 - A333-6 - - - - A420-WPL6 - -

PTS [Link] 1301 1300 A106-B - 5L-B - - A234-WPB - - -
PTS [Link] 1301-KS - - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1310 1310 - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1311 1310 - A333-6 - - - - A420-WPL6 - -
PTS [Link] 1374 1374 A106-B A333-6 - A672-C65 cl 22 A671-CC65 cl 22 A234-WPB A420-WPL6 A234-WPBW A420-WPL6W
PTS [Link] 1374-KS - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1380 - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1380 - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1380 - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1382 - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 1384 - - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W
PTS [Link] 2010 2010 A335-P11 - - A691-1.25Cr cl 22 - A234-WP11 - A234-WP11W -
PTS [Link] 2011 2011 A335-P11 - - A691-1.25Cr cl 22 - A234-WP11 - A234-WP11W -
PTS [Link] 2020 2020 A335-P11 - - A691-1.25Cr cl 22 - A234-WP11 - A234-WP11W -

PTS [Link] 2021 2021 A335-P11 - - A691-1.25Cr cl 22 - A234-WP11 - A234-WP11W -

PTS [Link] 2040 2040 A335-P5 - - A691-5Cr cl 22 - A234-WP5 - A234-WP5W -

PTS [Link] 2050 2050 A335-P22 - - - - A234-WP22 - - -

PTS [Link] 2090 2090 A335-P9 - - A691-9Cr cl 22 - A234-WP9 - A234-WP9W -

PTS [Link] 2110 2110 A335-P11 - - A691-1.25Cr cl 22 - A234-WP11 - A234-WP11W -
PTS [Link] 2120 2120 A335-P11 - - A691-1.25Cr cl 22 - A234-WP11 - A234-WP11W -
PTS [Link] 2121 2121 A335-P11 - - A691-1.25Cr cl 22 - A234-WP11 - A234-WP11W -
PTS [Link] 3012 3011 A312-TP321/347 - - A358-321/347 - A403-WP321/347-S - A403-WP321/347-WX -
PTS [Link] 3012 3011 A312-TP321/347 - - A358-321/347 - A403-WP321/347-S - A403-WP321/347-WX -
PTS [Link] 3012 3011 A312-TP321/347 - - A358-321/347 - A403-WP321/347-S - A403-WP321/347-WX -

PTS [Link] 3013 3012 A312-TP321/347 - - A358-321/347 - A403-WP321/347-S - A403-WP321/347-WX -

PTS [Link] 3015 - A312-TP321/347 - - A358-321/347 - A403-WP321/347-S - A403-WP321/347-WX -
PTS [Link] 3017 A312-TP321/347 - - A358-321/347 - A403-WP321/347-S - - -
PTS [Link] 3018 A312-TP321/347 - - A358-321/347 - A403-WP321/347-S - - -
PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -
PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -
PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -
PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -
PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -
PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -
PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -
PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -

Page 18 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Material specification
PTS PTS PTS Pipe Fittings
Piping Piping seamless sml wld welded seamless seamless welded welded
class class ASTM ASTM API ASTM ASTM ASTM ASTM ASTM ASTM
(old)

PTS [Link] 3021 3021 A312-TP316L - - A358-316L - A403-WP316L-S - A403-WP316L-WX -

PTS [Link] 3025 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3026 A312-TP316 - - A358-316 A403-WP316-S -
PTS [Link] 3032 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -
PTS [Link] 3032 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -
PTS [Link] 3032 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -
PTS [Link] 3032 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -
PTS [Link] 3032 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -
PTS [Link] 3032 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -

PTS [Link] 3032 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -

PTS [Link] 3033 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -

PTS [Link] 3033 3031 A312-TP316L - - A358-316L - A403-WP316L-S - - -
PTS [Link] 3052 3050 A312-TP321/347 - - A358-321/347 - A403-WP321/347-S - A403-WP321/347-WX -
PTS [Link] 3055 3055 A312-TP321 stab HT - - A358-321 stab HT - A403-WP321-S stab HT - A403-WP321-WX stab HT -
PTS [Link] 3055 3055 A312-TP321 stab HT - - A358-321 stab HT - A403-WP321-S stab HT - A403-WP321-WX stab HT -
PTS [Link] 3060 3060 A312-TP316 - - A358-316 - A403-WP316-S - - -
PTS [Link] 3081 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3081 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3081 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3081 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3081 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3081 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3081 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3083 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3083 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3084 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3085 A312-TP304 - - A358-304 - A403-WP304-S - - -
PTS [Link] 3085 A312-TP304 - - A358-304 - A403-WP304-S - - -
PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3086 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3092 3091 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3092 3091 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3092 3091 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3092 3091 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3092 3091 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3095 3090 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3095 3090 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3095 3090 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3095 3090 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3095 3090 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -

PTS [Link] 3096 A312-TP304 - - A358-304 - A403-WP304-S - A403-WP304-WX -
PTS [Link] 3101 3100 A312-TP316L - - A358-316L - A403-WP316L-S - - -
PTS [Link] 3101 3100 A312-TP316L - - A358-316L - A403-WP316L-S - - -
PTS [Link] 3191 3091 A312-TP304 - - A358-304 - A403-WP304-S - - -
PTS [Link] 3200 - A312-TP321/347 B167 UNS N06600 - A358-321/347 - A403-WP321/347-S - A403-WP321-WX -
PTS [Link] 3210 - A312-TP321/347 B167 UNS N06600 - - - A403-WP321/347-S - - -
PTS [Link] 6022 6021 B165 UNS N04400 - - - - B366-WPNC-S - B366-WPNC-W -
PTS [Link] 6072 6071 B622 UNS N10665 - - - - B366-WPHB2-S - B366-WPHB2-W -
PTS [Link] 6080 B165 UNS N04400 - - - - B366-WPNC-S - B366-WPNC-W -
PTS [Link] 6081 6080 B165 UNS N04400 - - - - B366-WPNC-S - B366-WPNC-W -
PTS [Link] 7011 7011 - - - - - - - - -

PTS [Link] 7011 7011 - - - - - - - - -

PTS [Link] 7012 7012 - - - - - - - - -

PTS [Link] 7015 7015 - - - - - - - - -

Page 19 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class Material specification
PTS PTS PTS Pipe Fittings
Piping Piping seamless sml wld welded seamless seamless welded welded
class class ASTM ASTM API ASTM ASTM ASTM ASTM ASTM ASTM
(old)

PTS [Link] 7102 7102 - - - - - - - - -

PTS [Link] 7112 7012 - - - - - - - - -

PTS [Link] 7122 7121 - - - - - - - - -

PTS [Link] 7130 7130 - - - - - - - - -

PTS [Link] 7201 7201 - - - - - - - - -

PTS [Link] 7311 7311 - - - - - - - - -

PTS [Link] 7320 7320 - - - - - - - - -

PTS [Link] 8011 8011 - - 5L-B (galv)

- - A234-WPB (galv) - - -

PTS [Link] 8011 8011 - - 5L-B (galv)

- - A234-WPB (galv) - - -

PTS [Link] 8160 8160 - - - - - - - - -

Page 20 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Forgings Plate Thermowell Meterrun Strainer (Y-type) Studbolts
Piping Piping Sieve Bolts Nuts
class class ASTM ASTM ASTM ASTM Class 150 + 300 ASTM or EN ASTM or EN
(old)

PTS [Link] 1000 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1001 1021 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

PTS [Link] 1001 1021 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1001 1021 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1001 1021 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1001-20 A105 A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1001-KS - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1002 1021 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1002 1021 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1002 1021 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1002 1021 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1002-KS - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1003 1373 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1003-KS - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1005 1023 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1007 1372 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1007 1372 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1007 1372 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1007-20 A105 A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1008 1372 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1008-KS - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1009 1372 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1011 1011 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

PTS [Link] 1011-20 - A105 A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1012 1012 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1012-20 - A105 A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1013 1013 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1013-20 - A105 A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1014 2080 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B16 A194-4
PTS [Link] 1015 1015 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1015-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1026 1025 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1026-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1031 1031 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1031-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1035 1125 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1035-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1036 1126 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1036-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1041 1041 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1041-20 - A105 A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1042 1042 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1042 1042 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1042 1042 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1042-20 - A105 A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1055 1055 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1055-20 - A105 A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7M A194-2HM
PTS [Link] 1061 1131 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1061-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

Page 21 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Forgings Plate Thermowell Meterrun Strainer (Y-type) Studbolts
Piping Piping Sieve Bolts Nuts
class class ASTM ASTM ASTM ASTM Class 150 + 300 ASTM or EN ASTM or EN
(old)

PTS [Link] 1071 1071 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1071-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1073 1073 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1076 1076 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1076-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

Page 22 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Forgings Plate Thermowell Meterrun Strainer (Y-type) Studbolts
Piping Piping Sieve Bolts Nuts
class class ASTM ASTM ASTM ASTM Class 150 + 300 ASTM or EN ASTM or EN
(old)

PTS [Link] 1085 1172 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1085 1172 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1085 1172 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1085 1172 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1085 1172 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1085 1172 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1085 1172 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1085 1172 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1086 1173 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1087 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1092 1091 A105 - - - - - - A193-B7 A194-2H
PTS [Link] 1092-KS - - A350-LF2 cl 1 - - - - - A193-B7 A194-2H
PTS [Link] 1141 1041 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1141-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1142 1042 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1142-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1160 1160 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1174 1174 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1175 1175 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7M A194-7M
PTS [Link] 1176 1176 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7M A194-7M
PTS [Link] 1180 1180 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1180 1180 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1180 1180 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1180 1180 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1187 - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1201 1201 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

PTS [Link] 1201 1201 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

PTS [Link] 1210 1210 A105 - - A516-60/65/70 - - - A193-B7 A194-2H

PTS [Link] 1220 1220 A105 - - - - - - A193-B7 A194-2H

PTS [Link] 1261 1261 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

PTS [Link] 1271 1271 - A350-LF2 cl 1 - - AISI 316 - - A320-L7/L43 A194-4

PTS [Link] 1301 1300 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1301-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1310 1310 - A350-LF2 cl 1 - - B564 UNS N04400 - - A193-B7M A194-2HM
PTS [Link] 1311 1310 - A350-LF2 cl 1 - - B564 UNS N04400 - - A193-B7M A194-2HM
PTS [Link] 1374 1374 A105 - - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1374-KS - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 1380 - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1380 - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1380 - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1382 - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 1384 - - A350-LF2 cl 1 - A516-60/65/70 AISI 316 AISI 316 AISI 316 A320-L7/L43 A194-4
PTS [Link] 2010 2010 A182-F11 cl 2 - - A387-11 cl 2 AISI 316 AISI 316 AISI 316 A193-B16 A194-4
PTS [Link] 2011 2011 A182-F11 cl 2 - - A387-11 cl 2 AISI 321 stab HT AISI 321 stab HT AISI 316 EN 10269 - 20CrMoVTiB4-10
PTS [Link] 2020 2020 A182-F11 cl 2 - - A387-11 cl 2 AISI 316 AISI 316 AISI 316 A193-B16 A194-4

PTS [Link] 2021 2021 A182-F11 cl 2 - - A387-11 cl 2 AISI 321 stab HT AISI 321 stab HT AISI 316 EN 10269 - 20CrMoVTiB4-10

PTS [Link] 2040 2040 A182-F5 - - A387-5 AISI 316 AISI 316 AISI 316 A193-B16 A194-4
PTS [Link] 2050 2050 A182-F22 cl 3 - - A387-22 cl 2 A182-F22 cl 3 - - EN 10269 - 20CrMoVTiB4-10

PTS [Link] 2090 2090 A182-F9 - - A387-9 AISI 316 AISI 316 AISI 316 EN 10269 - 20CrMoVTiB4-10
PTS [Link] 2110 2110 A182-F11 cl 2 - - A387-11 cl 2 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 2120 2120 A182-F11 cl 2 - - A387-11 cl 2 AISI 316 AISI 316 AISI 316 EN 10269 - 20CrMoVTiB4-10
PTS [Link] 2121 2121 A182-F11 cl 2 - - A387-11 cl 2 AISI 321 stab HT AISI 321 stab HT AISI 316 EN 10269 - 20CrMoVTiB4-10
PTS [Link] 3012 3011 A182-F321/347 A105 - A240-TP321/347 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 3012 3011 A182-F321/347 A105 - A240-TP321/347 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 3012 3011 A182-F321/347 A105 - A240-TP321/347 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H

PTS [Link] 3013 3012 A182-F321/347 A105 - A240-TP321/347 AISI 316 AISI 316 AISI 316 A193-B7 A194-2H
PTS [Link] 3015 - A182-F321/347 A105 - A240-TP321/347 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3017 A182-F347 - - A240-TP321/347 AISI 347 AISI 347 - A453-660 cl C A453-660 cl C
PTS [Link] 3018 A182-F347 - - A240-TP321/347 AISI 347 AISI 347 - A453-660 cl C A453-660 cl C
PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H

Page 23 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Forgings Plate Thermowell Meterrun Strainer (Y-type) Studbolts
Piping Piping Sieve Bolts Nuts
class class ASTM ASTM ASTM ASTM Class 150 + 300 ASTM or EN ASTM or EN
(old)

PTS [Link] 3021 3021 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H

PTS [Link] 3025 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8
PTS [Link] 3026 A182-F316 - - A240-TP316 AISI 316 AISI 316 A453-660 cl C A453-660 cl C
PTS [Link] 3032 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3032 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3032 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3032 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3032 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3032 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H

PTS [Link] 3032 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H

PTS [Link] 3033 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3033 3031 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3052 3050 A182-F321/347 - - A240-TP321/347 AISI 316 AISI 316 AISI 316 A453-660 cl C A453-660 cl C
PTS [Link] 3055 3055 A182-F321 stab HT - - A240-TP321 stab HT AISI 321 stab HT AISI 321 stab HT - A453-660 cl C A453-660 cl C
PTS [Link] 3055 3055 A182-F321 stab HT - - A240-TP321 stab HT AISI 321 stab HT AISI 321 stab HT - A453-660 cl C A453-660 cl C
PTS [Link] 3060 3060 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3081 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3081 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3081 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3081 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3081 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3081 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H

PTS [Link] 3081 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H

PTS [Link] 3083 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3083 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3084 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3085 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3085 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H

PTS [Link] 3086 A182-F304 A105 - A240-TP304 AISI 316 AISI 316 - A193-B7 A194-2H

PTS [Link] 3092 3091 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3092 3091 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3092 3091 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3092 3091 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M

PTS [Link] 3092 3091 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3095 3090 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3095 3090 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3095 3090 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3095 3090 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M

PTS [Link] 3095 3090 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3096 A182-F304 - - A240-TP304 AISI 316 AISI 316 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3101 3100 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3101 3100 A182-F316 A105 - A240-TP316 AISI 316 AISI 316 - A193-B7 A194-2H
PTS [Link] 3191 3091 A182-F304 - - A240-TP304 AISI 304 AISI 304 - A193-B8 cl 2/B8M2 cl 2B A194-8/8M
PTS [Link] 3200 - A182-F321/347 B564 UNS N06600 - - - - - A193-B7 A194-2H
PTS [Link] 3210 - A182-F321/347 B564 UNS N06600 - - - - - A193-B7 A194-2H
PTS [Link] 6022 6021 B564 UNS N04400 A105 - - B564 UNS N04400 - - A193-B7 A194-2H
PTS [Link] 6072 6071 A182-F316 A105 - B564 UNS N10675 - - A193-B7 A194-2H
PTS [Link] 6080 B564 UNS N04400 A105 - - B564 UNS N04400 - - A193-B7M A194-2HM
PTS [Link] 6081 6080 B564 UNS N04400 A105 - - B564 UNS N04400 - - A193-B7M A194-2HM
PTS [Link] 7011 7011 - - - - - - - A193-B7 A194-2H

PTS [Link] 7011 7011 - - - - - - - A193-B7 A194-2H

PTS [Link] 7012 7012 - - - - - - - A193-B7 A194-2H

PTS [Link] 7015 7015 - - - - - - - A193-B7 A194-2H

Page 24 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Forgings Plate Thermowell Meterrun Strainer (Y-type) Studbolts
Piping Piping Sieve Bolts Nuts
class class ASTM ASTM ASTM ASTM Class 150 + 300 ASTM or EN ASTM or EN
(old)

PTS [Link] 7102 7102 - - - - - - - A193-B7 A194-2H

PTS [Link] 7112 7012 - - - - - - - A193-B7 A194-2H

PTS [Link] 7122 7121 - - - - - - - A193-B7 A194-2H

PTS [Link] 7130 7130 - - - - - - - A193-B7 A194-2H

PTS [Link] 7201 7201 - - - - - - - A193-B7 A194-2H

PTS [Link] 7311 7311 - - - - - - - A193-B7 A194-2H

PTS [Link] 7320 7320 - - - - - - - A193-B7 A194-2H

PTS [Link] 8011 8011 A105 (galv) - - - - - - A193-B7 A194-2H

PTS [Link] 8160 8160 - - - - - - - A193-B7 A194-2H

Page 25 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gaskets Clamp type connectors
Piping Piping Type Sealing Winding Inner Centring Type Sealing Grooved Centring Hub Clamp Seal ring
class class < DN 600 Reinf ring ring > DN 600 profile ring Blind hub ASTM
(old) ASTM

PTS [Link] 1000 1011 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1001 1021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 1001 1021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316
- - -
PTS [Link] 1001 1021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316
- - -
PTS [Link] 1001 1021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316
- - -
PTS [Link] 1001-20 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316
- - -
PTS [Link] 1001-KS Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316
- - -
PTS [Link] 1002 1021 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1002 1021 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1002 1021 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1002 1021 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1002-KS Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1003 1373 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1003-KS Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1005 1023 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1007 1372 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1007 1372 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1007 1372 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1007-20 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1008 1372 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1008-KS Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1009 1372 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1011 1011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 1011-20 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1012 1012 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1012-20 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1013 1013 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1013-20 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1014 2080 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1015 1015 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1015-KS - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1026 1025 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1026-KS - Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1031 1031 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1031-KS - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1035 1125 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1035-KS - Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1036 1126 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1036-KS - Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1041 1041 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1041-20 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1042 1042 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1042 1042 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1042 1042 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1042-20 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1055 1055 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1055-20 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1061 1131 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1061-KS - Spiral wound Graphite AISI 316 AISI 316 CS - - - -

Page 26 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gaskets Clamp type connectors
Piping Piping Type Sealing Winding Inner Centring Type Sealing Grooved Centring Hub Clamp Seal ring
class class < DN 600 Reinf ring ring > DN 600 profile ring Blind hub ASTM
(old) ASTM

PTS [Link] 1071 1071 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1071-KS - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1073 1073 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1076 1076 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1076-KS - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

Page 27 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gaskets Clamp type connectors
Piping Piping Type Sealing Winding Inner Centring Type Sealing Grooved Centring Hub Clamp Seal ring
class class < DN 600 Reinf ring ring > DN 600 profile ring Blind hub ASTM
(old) ASTM

PTS [Link] 1085 1172 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1085 1172 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1085 1172 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1085 1172 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1085 1172 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1085 1172 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1085 1172 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1085 1172 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1086 1173 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1087 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316
PTS [Link] 1092 1091 Spiral wound PTFE AISI 316 AISI 316 CS - - - -
PTS [Link] 1092-KS - Spiral wound PTFE AISI 316 AISI 316 CS - - - -
PTS [Link] 1141 1041 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1141-KS - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1142 1042 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1142-KS - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1160 1160 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1174 1174 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1175 1175 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1176 1176 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1180 1180 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1180 1180 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1180 1180 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1180 1180 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1187 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316
PTS [Link] 1201 1201 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 1201 1201 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 1210 1210 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1220 1220 Spiral wound Graphite AISI 316 AISI 316 CS - - - -

PTS [Link] 1261 1261 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 1271 1271 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1301 1300 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1301-KS - Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 1310 1310 Spiral wound Graphite Alloy 400 CS CS - - - -
PTS [Link] 1311 1310 Spiral wound Graphite Alloy 400 CS CS - - - -
PTS [Link] 1374 1374 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1374-KS - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1380 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1380 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1380 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1382 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 1384 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 2010 2010 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 2011 2011 Spiral wound Graphite anti oxidation inh AISI 321 AISI 321 CS Camprofile Graphite AISI 321 AISI 321 - - -
PTS [Link] 2020 2020 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 2021 2021 Spiral wound Graphite anti oxidation inh AISI 321 AISI 321 CS Camprofile Graphite AISI 321 AISI 321 - - -

PTS [Link] 2040 2040 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 2050 2050 Spiral wound Graphite anti oxidation inh AISI 321 AISI 321 CS - - - -

PTS [Link] 2090 2090 Spiral wound Graphite anti oxidation inh AISI 321 AISI 321 CS Camprofile Graphite AISI 321 AISI 321 - - -
PTS [Link] 2110 2110 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 2120 2120 Spiral wound Graphite anti oxidation inh AISI 321 AISI 321 CS Camprofile Graphite AISI 321 AISI 321 - - -
PTS [Link] 2121 2121 Spiral wound Graphite anti oxidation inh AISI 321 AISI 321 CS Camprofile Graphite AISI 321 AISI 321 - - -
PTS [Link] 3012 3011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3012 3011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3012 3011 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 3013 3012 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3015 - Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3017 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3018 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

Page 28 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gaskets Clamp type connectors
Piping Piping Type Sealing Winding Inner Centring Type Sealing Grooved Centring Hub Clamp Seal ring
class class < DN 600 Reinf ring ring > DN 600 profile ring Blind hub ASTM
(old) ASTM

PTS [Link] 3021 3021 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 3025 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316
PTS [Link] 3026 Spiral wound Graphite AISI 316 AISI 316 CS -
PTS [Link] 3032 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3032 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3032 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3032 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3032 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3032 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -

PTS [Link] 3032 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -

PTS [Link] 3033 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3033 3031 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3052 3050 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3055 3055 Spiral wound Graphite anti oxidation inh AISI 321 AISI 321 CS Camprofile Graphite AISI 321 AISI 321 - - -
PTS [Link] 3055 3055 Spiral wound Graphite anti oxidation inh AISI 321 AISI 321 CS Camprofile Graphite AISI 321 AISI 321 - - -
PTS [Link] 3060 3060 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3081 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3081 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3081 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3081 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3081 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3081 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 3081 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 3083 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3083 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3084 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3085 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3085 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 3086 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -

PTS [Link] 3092 3091 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3092 3091 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3092 3091 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3092 3091 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -

PTS [Link] 3092 3091 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3095 3090 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3095 3090 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3095 3090 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3095 3090 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -

PTS [Link] 3095 3090 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3096 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - - -
PTS [Link] 3101 3100 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3101 3100 Spiral wound Graphite AISI 316 AISI 316 CS - - - -
PTS [Link] 3191 3091 Spiral wound Graphite AISI 316 AISI 316 CS Camprofile Graphite AISI 316 AISI 316 - -
PTS [Link] 3200 - Spiral wound Graphite anti oxidation inh Alloy 400 Alloy 400 AISI 316 - - -
PTS [Link] 3210 - Oval ring B164 UNS N04400 - - - - - -
PTS [Link] 6022 6021 Flat ring PTFE - - - - - -
PTS [Link] 6072 6071 Flat ring PTFE - - - - - -
PTS [Link] 6080 Spiral wound Graphite Alloy 400 Alloy 400 CS - - -
PTS [Link] 6081 6080 Spiral wound Graphite Alloy 400 Alloy 400 CS - - -
PTS [Link] 7011 7011 Flat ring EPDM - - -

PTS [Link] 7011 7011 Flat ring EPDM - - -

PTS [Link] 7012 7012 Flat ring EPDM Flat ring EPDM - -

PTS [Link] 7015 7015 Flat ring EPDM - - -

Page 29 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gaskets Clamp type connectors
Piping Piping Type Sealing Winding Inner Centring Type Sealing Grooved Centring Hub Clamp Seal ring
class class < DN 600 Reinf ring ring > DN 600 profile ring Blind hub ASTM
(old) ASTM

PTS [Link] 7102 7102 Flat ring EPDM - - -

PTS [Link] 7112 7012 Flat ring EPDM - - - - - -

PTS [Link] 7122 7121 Flat ring EPDM Flat ring EPDM - -

PTS [Link] 7130 7130 Flat ring EPDM Flat ring EPDM - -

PTS [Link] 7201 7201 Flat ring FKM - - - - - -

PTS [Link] 7311 7311 Flat ring EPDM - - -

PTS [Link] 7320 7320 Flat ring EPDM Flat ring EPDM - -

PTS [Link] 8011 8011 Spiral wound Graphite AISI 316 AISI 316 CS - - -

PTS [Link] 8160 8160 Flat ring PTFE - - - - - -

Page 30 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gate, Globe, Check (piston/swing type) valves Ball valves (floating)
Piping Piping Body & bonnet Trim Body & bonnet Trim Internal seat Internal seat Internal seat
class class ASTM ASTM Class 150-300 Class 600 Class 900-2500
(old) forging casting

PTS [Link] 1000 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1001 1021 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -

PTS [Link] 1001 1021 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1001 1021 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1001 1021 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1001-20 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1001-KS A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1002 1021 A105 AISI 316, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1002 1021 A105 AISI 316, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1002 1021 A105 AISI 316, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1002 1021 A105 AISI 316, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1002-KS A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1003 1373 A105 AISI 316, Stellite A216-WCB/WCC AISI 410 AISI 316, PTFE - -
PTS [Link] 1003-KS A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1005 1023 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1007 1372 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1007 1372 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1007 1372 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1007-20 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1008 1372 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1008-KS A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1009 1372 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -

PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1011 1011 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -

PTS [Link] 1011-20 - A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1012 1012 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1012-20 - A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1013 1013 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1013-20 - A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1014 2080 A182-F11 cl 2 AISI 316, Stellite A217-WC6 AISI 316, Stellite - - -
PTS [Link] 1015 1015 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1015-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1026 1025 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 1026-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 1031 1031 A105 AISI 410, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1031-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1035 1125 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1035-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1036 1126 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1036-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1041 1041 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1041-20 - A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1042 1042 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1042 1042 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1042 1042 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1042-20 - A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1055 1055 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1055-20 - A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1061 1131 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1061-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -

Page 31 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gate, Globe, Check (piston/swing type) valves Ball valves (floating)
Piping Piping Body & bonnet Trim Body & bonnet Trim Internal seat Internal seat Internal seat
class class ASTM ASTM Class 150-300 Class 600 Class 900-2500
(old) forging casting

PTS [Link] 1071 1071 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1071-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1073 1073 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1076 1076 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1076-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -

Page 32 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gate, Globe, Check (piston/swing type) valves Ball valves (floating)
Piping Piping Body & bonnet Trim Body & bonnet Trim Internal seat Internal seat Internal seat
class class ASTM ASTM Class 150-300 Class 600 Class 900-2500
(old) forging casting

PTS [Link] 1085 1172 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1085 1172 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1085 1172 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1085 1172 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1085 1172 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1085 1172 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1085 1172 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1085 1172 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1086 1173 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1087 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1092 1091 A105 Alloy 20 A216-WCB/WCC Alloy 20 Alloy 20, PTFE - -
PTS [Link] 1092-KS - A350-LF2 cl 1 Alloy 20 A352-LCC Alloy 20 Alloy 20, PTFE - -
PTS [Link] 1141 1041 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1141-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1142 1042 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1142-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1160 1160 A105 AISI 316, Stellite A216-WCB/WCC AISI 410 - - -
PTS [Link] 1174 1174 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1175 1175 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1176 1176 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1180 1180 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1180 1180 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1180 1180 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1180 1180 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1187 A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 1201 1201 A105 AISI 410, Stellite A216-WCB/WCC - AISI 410 AISI 316, PTFE - -

PTS [Link] 1201 1201 A105 AISI 410, Stellite A216-WCB/WCC - AISI 410 AISI 316, PTFE - -

PTS [Link] 1210 1210 A105 A216-WCB/WCC AISI 410 - - -

PTS [Link] 1220 1220 - - - - -

PTS [Link] 1261 1261 A105 AISI 410, Stellite A216-WCB/WCC AISI 410, Stellite - - -

PTS [Link] 1271 1271 A350-LF2 cl 1 Alloy 400 A352-LCC Alloy 400 Alloy 400, PTFE - -
PTS [Link] 1301 1300 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 1301-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 1310 1310 A350-LF2 cl 1 Alloy 400 A352-LCC Alloy 400 - - -
PTS [Link] 1311 1310 A350-LF2 cl 1 Alloy 400 A352-LCC Alloy 400 - - -
PTS [Link] 1374 1374 A105 AISI 316, Stellite A216-WCB/WCC AISI 316, Stellite - - -
PTS [Link] 1374-KS - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1380 - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1380 - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1380 - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1382 - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 1384 - A350-LF2 cl 1 AISI 316, Stellite A352-LCC AISI 316, Stellite - - -
PTS [Link] 2010 2010 A182-F11 cl 2 AISI 316, Stellite A217-WC6 AISI 316, Stellite - - -
PTS [Link] 2011 2011 A182-F11 cl 2 AISI 321, Stellite A217-WC6 AISI 321, Stellite - - -
PTS [Link] 2020 2020 A182-F11 cl 2 AISI 316, Stellite A217-WC6 AISI 316, Stellite - - -

PTS [Link] 2021 2021 A182-F11 cl 2 AISI 321, Stellite A217-WC6 AISI 321, Stellite - - -

PTS [Link] 2040 2040 A182-F5 AISI 316, Stellite A217-C5 AISI 316, Stellite - - -
PTS [Link] 2050 2050 A182-F22 cl 3 AISI 321, Stellite A217-WC9 AISI 321, Stellite - - -

PTS [Link] 2090 2090 A182-F9 AISI 321, Stellite A217-C12 AISI 321, Stellite - - -
PTS [Link] 2110 2110 A182-F11 cl 2 AISI 316, Stellite A217-WC6 AISI 316, Stellite - - -
PTS [Link] 2120 2120 A182-F11 cl 2 AISI 316, Stellite A217-WC6 AISI 316, Stellite - - -
PTS [Link] 2121 2121 A182-F11 cl 2 AISI 321, Stellite A217-WC6 AISI 321, Stellite - - -
PTS [Link] 3012 3011 A182-F321 AISI 321, Stellite A351-CF8C AISI 321, Stellite - - -
PTS [Link] 3012 3011 A182-F321 AISI 321, Stellite A351-CF8C AISI 321, Stellite - - -
PTS [Link] 3012 3011 A182-F321 AISI 321, Stellite A351-CF8C AISI 321, Stellite - - -

PTS [Link] 3013 3012 A182-F321 AISI 321, Stellite A351-CF8C AISI 321, Stellite - - -
PTS [Link] 3015 - A182-F321 AISI 321, Stellite A351-CF8C AISI 321, Stellite - - -
PTS [Link] 3017 A182-F347 AISI 347, Stellite A351-CF8C AISI 347, Stellite - - -
PTS [Link] 3018 A182-F347 AISI 347, Stellite A351-CF8C AISI 347, Stellite - - -
PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -

Page 33 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gate, Globe, Check (piston/swing type) valves Ball valves (floating)
Piping Piping Body & bonnet Trim Body & bonnet Trim Internal seat Internal seat Internal seat
class class ASTM ASTM Class 150-300 Class 600 Class 900-2500
(old) forging casting

PTS [Link] 3021 3021 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -

PTS [Link] 3025 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3026 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3032 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3032 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3032 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3032 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3032 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3032 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -

PTS [Link] 3032 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -

PTS [Link] 3033 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3033 3031 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3052 3050 A182-F321 AISI 321, Stellite A351-CF8C AISI 321, Stellite - - -
PTS [Link] 3055 3055 A182-F321 AISI 321, Stellite A351-CF8C AISI 321, Stellite - - -
PTS [Link] 3055 3055 A182-F321 AISI 321, Stellite A351-CF8C AISI 321, Stellite - - -
PTS [Link] 3060 3060 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3081 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3081 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3081 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3081 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3081 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3081 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -

PTS [Link] 3081 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -

PTS [Link] 3083 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3083 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3084 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3085 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 3085 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -

PTS [Link] 3086 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -

PTS [Link] 3092 3091 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3092 3091 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3092 3091 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3092 3091 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -

PTS [Link] 3092 3091 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3095 3090 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3095 3090 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3095 3090 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3095 3090 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -

PTS [Link] 3095 3090 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3096 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite - - -
PTS [Link] 3101 3100 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 3101 3100 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, Stellite - -
PTS [Link] 3191 3091 A182-F316 AISI 316, Stellite A351-CF8M AISI 316, Stellite AISI 316, PTFE - -
PTS [Link] 3200 - A182-F321 or Alloy 600 Alloy 600, Stellite A351-CF8C Alloy 600, Stellite - - -
PTS [Link] 3210 - A182-F321 or Alloy 600 Alloy 600, Colmonoy A494-CY40-cl2 Alloy 600, Colmonoy - - -
PTS [Link] 6022 6021 B564 UNS N04400 Alloy 400 A494M-35-1 Alloy 400 Alloy 400, PTFE - -
PTS [Link] 6072 6071 B366-WPHB2 B335 UNS N10665 A494-N-12MV-cl 2 B335 UNS N10665 Alloy B2, PTFE - -
PTS [Link] 6080 B564 UNS N04400 Alloy 400 A494M-35-1 Alloy 400 - - -
PTS [Link] 6081 6080 B564 UNS N04400 Alloy 400 A494M-35-1 Alloy 400 - - -
PTS [Link] 7011 7011 A182-F316 AISI 316, Stellite A351-CF8M A536 60-40-18, EPDM - AISI 316, PTFE - -

PTS [Link] 7011 7011 A182-F316 AISI 316, Stellite A351-CF8M A536 60-40-18, EPDM - AISI 316, PTFE - -

PTS [Link] 7012 7012 A182-F316 AISI 316, Stellite A351-CF8M A536 60-40-18, EPDM - AISI 316, PTFE - -

PTS [Link] 7015 7015 A182-F316 AISI 316, Stellite A351-CF8M A536 60-40-18, EPDM - AISI 316, PTFE - -

Page 34 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Gate, Globe, Check (piston/swing type) valves Ball valves (floating)
Piping Piping Body & bonnet Trim Body & bonnet Trim Internal seat Internal seat Internal seat
class class ASTM ASTM Class 150-300 Class 600 Class 900-2500
(old) forging casting

PTS [Link] 7102 7102 A105 AISI 410 A216-WCB/WCC - - AISI 316, PTFE - -

PTS [Link] 7112 7012 ASTM A536 60-40-18 PTFE, PFA ASTM A536 60-40-18 PTFE; PTFE, PFA lined Alum, AISI 316; PTFE, PFA lined - -
PTS [Link] 7122 7121 ASTM B148-UNS C95400 Aluminium bronze ASTM B148-UNS C95400 - Aluminium bronze Aluminium bronze, PTFE - -

PTS [Link] 7130 7130 - - ASTM A536 60-40-18 ASTM B148-UNS C95400 - - -

PTS [Link] 7201 7201 ASTM A536 60-40-18 PTFE, PFA ASTM A536 60-40-18 PTFE; PTFE, PFA lined Alum, AISI 316; PTFE, PFA lined - -
PTS [Link] 7311 7311 - - ASTM A536 60-40-18 ASTM A216-WCB/WCC - - -

PTS [Link] 7320 7320 ASTM B148-UNS C95400 Aluminium bronze ASTM B148-UNS C95400 ASTM A536 60-40-18 Aluminium bronze - - -

PTS [Link] 8011 8011 ASTM B148-UNS C95400 Aluminium bronze ASTM A536 60-40-18 ASTM B148-UNS C95400 Aluminium bronze Aluminium bronze, PTFE - -

PTS [Link] 8011 8011 ASTM B148-UNS C95400 Aluminium bronze ASTM A536 60-40-18 - Aluminium bronze Aluminium bronze, PTFE - -

PTS [Link] 8160 8160 ASTM A536 60-40-18 PTFE, PFA ASTM A536 60-40-18 PTFE; PTFE, PFA lined Alum, AISI 316; PTFE, PFA lined - -

Page 35 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Ball valves (trunnion) Butterfly valves Check valves (dual plate) Plug valves
Piping Piping Internal seat Internal seat Internal seat Trim Trim Trim Trim Trim
class class Class 150-300 Class 600 Class 900-2500 Class 150-300 Class 600 Class 900
(old)

PTS [Link] 1000 1011 - - - CS, Duplex, Stellite - - AISI 410 -

PTS [Link] 1001 1021 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -

PTS [Link] 1001 1021 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1001 1021 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1001 1021 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1001-20 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1001-KS AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1002 1021 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1002 1021 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1002 1021 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1002 1021 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1002-KS AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1003 1373 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 410 -
PTS [Link] 1003-KS AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1005 1023 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1007 1372 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1007 1372 - - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1007 1372 - - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1007-20 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1008 1372 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1008-KS AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1009 1372 AISI 316, Stellite - - CS, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -

PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1011 1011 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -

PTS [Link] 1011-20 - - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1012 1012 - - - CS, Duplex, Stellite - CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1012-20 - - - - CS, Duplex, Stellite - CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1013 1013 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1013-20 - - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1014 2080 - - - 1.25Cr-0.5Mo, Duplex, Stellite - - 1.25Cr-0.5Mo, Stellite -
PTS [Link] 1015 1015 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1015-KS - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1026 1025 AISI 316, Stellite - - CS, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 1026-KS - AISI 316, Stellite - - LTCS, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 1031 1031 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410 -
PTS [Link] 1031-KS - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1035 1125 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1035-KS - AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1036 1126 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1036-KS - AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1041 1041 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1041-20 - - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1042 1042 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1042 1042 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1042 1042 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1042-20 - - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1055 1055 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1055-20 - - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1061 1131 AISI 316, filled PTFE - - CS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1061-KS - AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -

Page 36 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Ball valves (trunnion) Butterfly valves Check valves (dual plate) Plug valves
Piping Piping Internal seat Internal seat Internal seat Trim Trim Trim Trim Trim
class class Class 150-300 Class 600 Class 900-2500 Class 150-300 Class 600 Class 900
(old)

PTS [Link] 1071 1071 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1071-KS - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1073 1073 - - - CS, Duplex, Stellite CS, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 1076 1076 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1076-KS - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -

Page 37 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Ball valves (trunnion) Butterfly valves Check valves (dual plate) Plug valves
Piping Piping Internal seat Internal seat Internal seat Trim Trim Trim Trim Trim
class class Class 150-300 Class 600 Class 900-2500 Class 150-300 Class 600 Class 900
(old)

PTS [Link] 1085 1172 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1085 1172 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1085 1172 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1085 1172 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1085 1172 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1085 1172 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1085 1172 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1085 1172 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1086 1173 AISI 316, filled PTFE - - LTCS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 1087 - - - LTCS, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 1092 1091 Alloy 20, filled PTFE - - - - - - -
PTS [Link] 1092-KS - Alloy 20, filled PTFE - - - - - - -
PTS [Link] 1141 1041 - - - CS, Duplex, Stellite CS, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 1141-KS - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 1142 1042 - - - CS, Duplex, Stellite CS, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 1142-KS - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 1160 1160 - - - CS, Duplex, Stellite CS, Duplex, Stellite - AISI 410 -
PTS [Link] 1174 1174 - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 1175 1175 - - - LTCS, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 1176 1176 - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1180 1180 - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1180 1180 - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1180 1180 - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1180 1180 - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1187 - - - LTCS, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 1201 1201 - - - Al bronze, EPDM lined - - AISI 410, EPDM -

PTS [Link] 1201 1201 - - - Al bronze, EPDM lined - - AISI 410, EPDM -

PTS [Link] 1210 1210 - - - - - - AISI 410

PTS [Link] 1220 1220 - - - - - - -

PTS [Link] 1261 1261 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 410, Stellite -

PTS [Link] 1271 1271 Alloy 400, filled PTFE - - - - - - -

PTS [Link] 1301 1300 - - - CS, Duplex, Stellite - - - -
PTS [Link] 1301-KS - - - - CS, Duplex, Stellite - - - -
PTS [Link] 1310 1310 - - - - - - - Alloy 400, PTFE
PTS [Link] 1311 1310 - - - - - - - Alloy 400, PTFE
PTS [Link] 1374 1374 - - - CS, Duplex, Stellite CS, Duplex, Stellite CS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1374-KS - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1380 - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1380 - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1380 - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite LTCS, Alloy 625, Stellite AISI 316, Stellite -
PTS [Link] 1382 - - - - LTCS, Duplex, Stellite AISI 316, Stellite -
PTS [Link] 1384 - - - - LTCS, Duplex, Stellite LTCS, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 2010 2010 - - - 1.25Cr-0.5Mo, Duplex, Stellite 1.25Cr-0.5Mo, Duplex, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Stellite -
PTS [Link] 2011 2011 - - - 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite AISI 321, Stellite -
PTS [Link] 2020 2020 - - - 1.25Cr-0.5Mo, Duplex, Stellite 1.25Cr-0.5Mo, Duplex, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Stellite -

PTS [Link] 2021 2021 - - - 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite AISI 321, Stellite -

PTS [Link] 2040 2040 - - - 5Cr-0.5Mo, Duplex, Stellite 5Cr-0.5Mo, Duplex, Stellite 5Cr-0.5Mo, Alloy 625, Stellite 5Cr-0.5Mo, Stellite -
PTS [Link] 2050 2050 - - - - - - 1.25Cr-0.5Mo, Stellite -

PTS [Link] 2090 2090 - - - 9Cr-1Mo, Alloy 625, Stellite 9Cr-1Mo, Alloy 625, Stellite 9Cr-1Mo, Alloy 625, Stellite AISI 321, Stellite -
PTS [Link] 2110 2110 - - - 1.25Cr-0.5Mo, Duplex, Stellite 1.25Cr-0.5Mo, Duplex, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Stellite -
PTS [Link] 2120 2120 - - - 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite AISI 321, Stellite -
PTS [Link] 2121 2121 - - - 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite 1.25Cr-0.5Mo, Alloy 625, Stellite AISI 321, Stellite -
PTS [Link] 3012 3011 - - - AISI 321, Duplex, Stellite AISI 321, Duplex, Stellite AISI 321, Nitronic, Stellite AISI 321, Stellite -
PTS [Link] 3012 3011 - - - AISI 321, Duplex, Stellite AISI 321, Duplex, Stellite AISI 321, Nitronic, Stellite AISI 321, Stellite -
PTS [Link] 3012 3011 - - - AISI 321, Duplex, Stellite AISI 321, Duplex, Stellite AISI 321, Nitronic, Stellite AISI 321, Stellite -

PTS [Link] 3013 3012 - - - AISI 321, Duplex, Stellite AISI 321, Duplex, Stellite AISI 321, Nitronic, Stellite AISI 321, Stellite -
PTS [Link] 3015 - - - - AISI 321, Duplex, Stellite AISI 321, Duplex, Stellite AISI 321, Nitronic, Stellite AISI 321, Stellite -
PTS [Link] 3017 - - - - - AISI 347, Nitronic, Stellite AISI 347, Stellite -
PTS [Link] 3018 - - - - - AISI 347, Nitronic, Stellite AISI 347, Stellite -
PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -

Page 38 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Ball valves (trunnion) Butterfly valves Check valves (dual plate) Plug valves
Piping Piping Internal seat Internal seat Internal seat Trim Trim Trim Trim Trim
class class Class 150-300 Class 600 Class 900-2500 Class 150-300 Class 600 Class 900
(old)

PTS [Link] 3021 3021 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -

PTS [Link] 3025 - - - - AISI 316, Nitronic, Stellite - AISI 316, Stellite -
PTS [Link] 3026 - - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3032 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3032 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3032 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3032 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3032 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3032 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -

PTS [Link] 3032 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -

PTS [Link] 3033 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3033 3031 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3052 3050 - - - AISI 321, Duplex, Stellite AISI 321, Duplex, Stellite - AISI 321, Stellite -
PTS [Link] 3055 3055 - - - AISI 321, Nitronic, Stellite AISI 321, Nitronic, Stellite AISI 321, Nitronic, Stellite AISI 321, Stellite -
PTS [Link] 3055 3055 - - - AISI 321, Nitronic, Stellite AISI 321, Nitronic, Stellite AISI 321, Nitronic, Stellite AISI 321, Stellite -
PTS [Link] 3060 3060 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 3081 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3081 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3081 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3081 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3081 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3081 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -

PTS [Link] 3081 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -

PTS [Link] 3083 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3083 AISI 316, filled PTFE - - AISI 316, Duplex, Stellite - - AISI 316, Stellite -
PTS [Link] 3084 - - - - AISI 316, Duplex, Stellite - AISI 316, Stellite -
PTS [Link] 3085 - - - AISI 316, Duplex, Stellite - - - -
PTS [Link] 3085 - - - AISI 316, Duplex, Stellite - - - -
PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -

PTS [Link] 3086 - - - AISI 316, Duplex, Stellite AISI 316, Duplex, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -

PTS [Link] 3092 3091 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3092 3091 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3092 3091 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3092 3091 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -

PTS [Link] 3092 3091 AISI 316, filled PTFE - - SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3095 3090 - - - AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3095 3090 - - - AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3095 3090 - - - AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3095 3090 - - - AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -

PTS [Link] 3095 3090 - - - AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Nitronic, Stellite AISI 316, Stellite -
PTS [Link] 3096 - - - - AISI 316, Nitronic, Stellite - AISI 316, Stellite -
PTS [Link] 3101 3100 - - - AISI 316, Duplex, Stellite - - - -
PTS [Link] 3101 3100 - - - AISI 316, Duplex, Stellite - - - -
PTS [Link] 3191 3091 AISI 316, filled PTFE SS, PTFE, Alloy 625 - - AISI 316, Stellite -
PTS [Link] 3200 - - - - AISI 321, Duplex, Stellite AISI 321, Duplex, Stellite - - -
PTS [Link] 3210 - - - - - - - - -
PTS [Link] 6022 6021 - - - Alloy 400, 625 - - - -
PTS [Link] 6072 6071 Alloy B2, filled PTFE - - - - - - -
PTS [Link] 6080 - - - - - - - Alloy 400, PTFE sleeve
PTS [Link] 6081 6080 - - - - - - - Alloy 400, PTFE sleeve
PTS [Link] 7011 7011 - - - Al bronze, EPDM lined - - ASTM A351-CF8M -

PTS [Link] 7011 7011 - - - Al bronze, EPDM lined - - ASTM A351-CF8M -

PTS [Link] 7012 7012 - - - Al bronze, EPDM lined - - ASTM A351-CF8M -

PTS [Link] 7015 7015 - - - Al bronze, EPDM lined - - ASTM A351-CF8M -

Page 39 of 40
Service and Material Selection Index DEP [Link]-Gen.
Reference Piping class
PTS PTS PTS Ball valves (trunnion) Butterfly valves Check valves (dual plate) Plug valves
Piping Piping Internal seat Internal seat Internal seat Trim Trim Trim Trim Trim
class class Class 150-300 Class 600 Class 900-2500 Class 150-300 Class 600 Class 900
(old)

PTS [Link] 7102 7102 - - - Al bronze, EPDM lined - - AISI 410, EPDM -

PTS [Link] 7112 7012 - - - Al Bronze; PTFE or PFA lined - - - -

PTS [Link] 7122 7121 - - - Al bronze, EPDM lined - - Aluminium bronze -

PTS [Link] 7130 7130 - - - Al bronze, EPDM lined - - Aluminium bronze -

PTS [Link] 7201 7201 - - - - - - - -

PTS [Link] 7311 7311 - - - Al bronze, EPDM lined - - AISI 410, EPDM -

PTS [Link] 7320 7320 - - - Al bronze, EPDM lined - - Aluminium bronze -

PTS [Link] 8011 8011 - - - Al bronze, EPDM lined - - Aluminium bronze -

PTS [Link] 8160 8160 - - - - - - - -

Page 40 of 40
History of R+C Piping Classes
Material ASME Ca Em Ball Service Apr 1966 Jul 1970 Feb 1974 May 1979 Sep 1983 Feb 1986 Oct 1989 Oct 1992 Dec 1994 Dec 1996 Jan 1999 Jan 2000 Mar 2003 Aug 2005 Jan 2009 = replaced by
rating cl valveSour PWHT T - T+ Special PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev = not replaced

Carbon steel 150 1 A -20 400 11000 O 08/05 11000 A 01/09

Carbon steel 150 1 B ISO -20 150 11001 O 08/05 11001 A 01/09
Carbon steel F-Gr 150 1 B ISO -20 150 11001-KS O 08/05 11001-KS A 01/09
Carbon steel 150 1 A ISO -20 150 11002 O 08/05 11002 A 01/09
Carbon steel F-Gr 150 1 A ISO -20 150 11002-KS O 08/05 11002-KS A 01/09
Carbon steel 150 3 A ISO 0 150 11003 O 08/05 11003 A 01/09
Carbon steel F-Gr 150 3 A ISO -20 150 11003-KS O 08/05 11003-KS A 01/09
Carbon steel 150 1 B ISO Mod PWHT -20 150 11005 O 08/05 11005 A 01/09
Carbon steel 150 3 B ISO Mod PWHT -20 150 11007 O 08/05 11007 A 01/09
Carbon steel 150 3 A ISO Mod PWHT 0 150 11008 O 08/05 11008 A 01/09
Carbon steel F-Gr 150 3 A ISO Mod PWHT -20 150 11008-KS O 08/05 11008-KS A 01/09
Carbon steel M-Sour PWHT[A] 150 3 A ISO Mod PWHT 0 200 Sodium hydroxide (Caustic soda) 11009 O 01/09
D Carbon steel 150 1 101 04/66 1101 07/70 1101 02/74 1101 05/79 1101 07/83 1101 07/84 1101 10/89 11010 O 10/92 11010 A 12/94 11011
Carbon steel 150 1 B -20 400 11011 O 12/94 11011 A 12/96 11011 A 12/96 11011 B 01/00 11011 C 03/03 11011 D 08/05 11011 E 01/09
Carbon steel 150 1 B Mod PWHT -20 400 11013 O 08/05 11013 A 01/09
Carbon steel 150 1 B -20 427 11014 O 01/09
Carbon steel 150 1 B High -20 400 11015 O 12/94 11015 A 12/96 11015 A 12/96 11015 B 01/00 11015 C 03/03 11015 D 08/05 11015 E 01/09
Carbon steel F-Gr 150 1 B High -20 340 11015-KS O 08/05 11015-KS A 01/09
D Carbon steel 150 1 102 04/66 not issued not issued 1102 05/79 1102 07/83 1102 07/84 1102 10/89 11020 O 10/92 11020 A 12/94 11021
D Carbon steel 150 1 B BS -20 200 11021 O 12/94 11021 A 12/96 11021 A 12/96 11021 B 01/00 11021 C 03/03 11021 D 08/05 11001
D Carbon steel 150 1 PWHT 11022 O 10/92 11022 A 12/94 11023
D Carbon steel 150 1 B BS Mod PWHT -20 200 11023 O 12/94 11023 A 12/96 11023 B 12/98 11023 C 01/00 11023 D 03/03 11023 E 08/05 11005
D Carbon steel 150 3 B BS High PWHT 0 210 Amine 11025 O 12/94 11025 A 12/96 11025 B 12/98 11025 C 01/00 11025 D 03/03 11025 E 08/05 11026
Carbon steel 150 3 B ISO High PWHT 0 210 Amine 11026 O 08/05 11026 A 01/09
Carbon steel F-Gr 150 3 B ISO High PWHT -20 210 Amine 11026-KS O 08/05 11026-KS A 01/09
D Carbon steel 150 3 103 04/66 1103 07/70 1103 02/74 1103 05/79 1103 07/83 1103 07/84 1103 10/89 11030 O 10/92 11030 A 12/94 11031
Carbon steel 150 3 B -20 400 11031 O 12/94 11031 A 12/96 11031 B 12/98 11031 C 01/00 11031 D 03/03 11031 E 08/05 11031 F 01/09
Carbon steel F-Gr 150 3 B -20 340 11031-KS O 08/05 11031-KS A 01/09
Carbon steel 150 1 B ISO High 0 150 11035 O 08/05 11035 A 01/09
Carbon steel F-Gr 150 1 B ISO High -20 150 11035-KS O 08/05 11035-KS A 01/09
Carbon steel 150 3 B ISO High 0 150 11036 O 08/05 11036 A 01/09
Carbon steel F-Gr 150 3 B ISO High -20 150 11036-KS O 08/05 11036-KS A 01/09
Carbon steel 150 1 B Mod -20 400 11041 O 12/96 11041 O 12/96 11041 A 01/00 11041 B 03/03 11041 C 08/05 11041 D 01/09
Carbon steel 150 3 B Mod -20 400 11042 O 12/96 11042 A 12/98 11042 B 01/00 11042 C 03/03 11042 D 08/05 11042 E 01/09
D Carbon steel 150 3 105 04/66 1105 07/70 1105 02/74 1105 05/79 1105 07/83 1105 07/84 1105 10/89 11050 O 10/92 11050 A 12/94 11031
D Carbon steel 150 3 11051 O 12/94 11031
Carbon steel 150 3 B High -20 400 11055 O 12/94 11055 A 12/96 11055 A 12/96 11055 B 01/00 11055 C 03/03 11055 D 08/05 11055 E 01/09
D Carbon steel 150 1 106 04/66 1106 07/70 1106 02/74 1106 05/79 1106 07/83 1106 07/84 1106 10/89 11060 O 10/92 11060 A 12/94 11011
D Carbon steel 150 1 107 04/66 1107 07/70 -
Carbon steel 150 1 B Mod 0 400 H2 11071 A 03/03 11071 B 08/05 11071 C 01/09
Carbon steel F-Gr 150 1 B Mod -20 340 H2 11071-KS O 08/05 11071-KS A 01/09
Carbon steel M-Sour [A] 150 1 A Mod 0 400 H2 11073 O 01/09
Carbon steel 150 3 B Mod 0 400 H2 11076 A 03/03 11076 B 08/05 11076 C 01/09
Carbon steel F-Gr 150 3 B Mod -20 340 H2 11076-KS O 08/05 11076-KS A 01/09
Carbon steel LT 150 1 B ISO Mod -50 150 11085 O 08/05 11085 A 01/09
Carbon steel LT 150 1 B ISO Mod PWHT -50 150 11086 O 08/05 11086 A 01/09
D Carbon steel 150 1 108 04/66 1108 07/70 1108 02/74 1108 05/79 1108 07/83 1108 07/84 1108 10/89 11080 O 10/92 11080 A 12/94 11011
D Carbon steel 150 1 11081 O 12/94 11011
Carbon steel LT M-Sour 150 1 B ISO Mod -50 150 11087 O 01/09
D Carbon steel 150 3 Acid 1109 07/70 1109 02/74 1109 05/79 1109 07/83 1109 02/86 1109 10/89 11090 O 10/92 11090 A 12/94 11091
D Carbon steel 150 3 A BS 0 65 Sulf acid 11091 O 12/94 11091 O 12/96 11091 A 12/96 11091 B 01/00 11091 C 03/03 11091 D 08/05 11092
Carbon steel 150 3 A ISO 0 65 Sulf acid 11092 O 08/05 11092 A 01/09
Carbon steel F-Gr 150 3 A ISO 0 65 Sulf acid 11092-KS O 08/05 11092-KS A 01/09
D Carbon steel 150 1 LPG 1110 07/70 1110 02/74 1110 05/79 1110 07/83 -
D Carbon steel 150 1 LPG 111 04/66 1111 07/70 1111 02/74 1111 05/79 1111 07/83 1111 07/84
D Carbon steel 150 1 112 04/66 not issued not issued 1112 05/79 1112 07/83 1112 02/86 1112 10/89 11120 O 10/92 11120 A 12/94 11021
D Carbon steel 150 1 11122 O 12/94
D Carbon steel 150 3 11123 O 12/94
D Carbon steel 150 1 B BS High 0 200 11125 O 12/94 11125 A 12/96 11125 A 12/96 11125 B 01/00 11125 C 03/03 11125 D 08/05 11035
D Carbon steel 150 3 B BS High 0 200 11126 O 12/94 11126 A 12/96 11126 A 12/96 11126 B 01/00 11126 C 03/03 11126 D 08/05 11036
D Carbon steel 150 1 MV 1114 07/70 1114 02/74 1114 05/79 1114 07/83 1114 07/84 -
D Carbon steel 150 1 HV 11140 O 12/94 11011
Carbon steel 150 1 A Mod -20 400 11141 O 08/05 11141 A 01/09
Carbon steel F-Gr 150 1 A Mod -20 340 11141-KS O 08/05 11141-KS A 01/09
Carbon steel 150 3 A Mod -20 400 11142 O 08/05 11142 A 01/09
Carbon steel F-Gr 150 3 A Mod -20 340 11142-KS O 08/05 11142-KS A 01/09
D Carbon steel 150 1 HV 1115 07/70 1115 02/74 1115 05/79 1115 07/83 1115 02/86 1115 10/89 11150 O 10/92 11150 A 12/94
D Carbon steel LT 150 1 -25 1116 07/70 -
D Carbon steel LT 150 1 -50 1117 07/70 1117 02/74 1117 05/79 1117 07/83 1117 02/86 1117 10/89 11170 O 10/92 11170 A 12/94 11172
D Carbon steel LT 150 1 PWHT -50 11171 O 10/92 11171 A 12/94 11173
D Carbon steel LT 150 1 B Mod -50 200 11172 O 12/94 11172 A 12/96 11172 B 12/98 11172 C 01/00 11172 D 03/03 11085 11085
D Carbon steel LT 150 1 B Mod PWHT -50 200 11173 O 1294 11173 A 12/98 11173 B 01/00 11173 C 03/03 11086 11086
Carbon steel LT 150 1 A Mod PWHT -50 340 11174 O 03/03 11174 A 08/05 11174 B 01/09
Carbon steel LT 150 1 B High -50 340 11175 O 12/94 11175 A 12/96 11175 A 12/96 11175 B 01/00 11175 C 03/03 11175 D 08/05 11175 E 01/09
Carbon steel LT 150 3 B High -50 340 11176 O 12/94 11176 A 12/96 11176 A 12/96 11176 B 01/00 11176 C 03/03 11176 D 08/05 11176 E 01/09
D Carbon steel LT 150 1 -75 1118 07/70 -
Carbon steel LT 150 1 B Mod -50 340 11180 O 03/03 11180 A 08/05 11180 B 01/09
Carbon steel LT M-Sour[A] 150 1 A ISO Mod -50 150 11187 O 01/09
D Carbon steel 150 1 Fire f. 1120 07/70 1120 02/74 1120 05/79 1120 07/83 1120 07/84 1120 10/89 11200 O 10/92 11200 A 12/94 11201
Carbon steel 150 1 B ISO 0 90 11201 O 12/94 11201 A 12/96 11201 A 12/96 11201 B 01/00 11201 C 03/03 11201 D 08/05 11201 E 01/09
D Carbon steel 150 1 Water 121 04/66 1121 07/70 1121 02/74 1121 05/79 1121 07/83 1121 02/86 -
D Carbon steel 150 1 340 MV 1122 07/70 -
D Carbon steel 150 1 1125 05/79 -
D Carbon steel 150 1 Steam 126 04/66 1126 07/70 1126 02/74 1126 05/79 1126 07/83 1126 07/84 1126 10/89 11260 O 10/92 11260 A 12/94 11261
Carbon steel 150 3 B 0 200 Sulfur 11210 O 08/05 11210 O 08/05
Carbon steel 150 1 B 0 200 Sulfur 11220 O 08/05 11220 A 01/09
Carbon steel 150 1 B 0 400 Steam 11261 O 12/94 11261 A 12/96 11261 B 12/98 11261 C 01/00 11261 D 03/03 11261 E 08/05 11261 F 01/09
D Carbon steel 150 1 A BS 0 200 EO 1130 07/83 1130 02/86 1130 10/89 11300 O 10/92 11300 A 12/94 11300 A 12/96 11300 B 12/96 11300 C 01/00 11300 D 03/03 11300 E 08/05 11301
Carbon steel 150 1 A ISO 0 200 EO 11301 O 08/05 11301 A 01/09
Carbon steel F-Gr 150 1 A ISO -20 200 EO 11301-KS O 08/05 11301-KS A 01/09
D Carbon steel 150 1 131 04/66 -

Page 1 of 7
History of R+C Piping Classes
Material ASME Ca Em Ball Service Apr 1966 Jul 1970 Feb 1974 May 1979 Sep 1983 Feb 1986 Oct 1989 Oct 1992 Dec 1994 Dec 1996 Jan 1999 Jan 2000 Mar 2003 Aug 2005 Jan 2009 = replaced by
rating cl valveSour PWHT T - T+ Special PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev = not replaced

D Carbon steel 150 X 1133 07/70 -

D Carbon steel 150 X MV 1134 07/70 -
D Carbon steel 150 X HV 1135 07/70 -
D Carbon steel 150 1 NaOH 136 04/66 1136 07/70 1136 02/74 1136 05/79 1136 07/83 1136 02/86 -
D Carbon steel 150 3 NaOH 1137 07/70 1137 02/74 1137 05/79 1137 07/83 1137 07/84 1137 10/89 11370 O 10/92 11370 A 12/94 11373
D Carbon steel 150 3 PWHT 11371 O 10/92 11371 A 12/94 11372
D Carbon steel 150 3 B BS Mod PWHT 0 200 11372 O 12/94 11372 A 12/96 11372 B 12/98 11372 C 01/00 11372 D 03/03 11372 E 08/05
11007
D Carbon steel 150 3 B BS 0 200 11373 O 12/94 11373 A 12/96 11373 B 12/98 11373 C 01/00 11373 D 03/03 11373 E 08/05
11003
Carbon steel 150 3 B Mod PWHT 0 400 11374 O 03/03 11374 A 08/05
11374 B 01/09
Carbon steel F-Gr 150 3 B Mod PWHT -20 340 11374-KS O 08/05
11374-KS A 01/09
Carbon steel LT 150 3 B Mod -50 340 11380 O 08/05
11380 A 01/09
Carbon steel LT M-Sour 150 3 B Mod -50 340 11382 O 01/09
Carbon steel LT 150 3 B Mod PWHT -50 340 11384 O 08/05 11384 A 01/09
D Carbon steel galvanised 150 0 151 04/66 -
D Carbon steel 150 ? 152 04/66 -
D Carbon steel 150 ? 153 04/66 -
D Carbon steel 150 ? 154 04/66 -
D Carbon steel 150 ? 182 04/66 -
Alloy steel 1.25Cr-0.5Mo 150 1 B 0 500 Steam 12021 O 08/05 12021 A 01/09
Alloy steel 5Cr-0.5Mo 150 1 B -20 450 204 04/66 1204 07/70 1204 02/74 1204 05/79 1204 07/83 1204 02/86 1204 10/89 12040 O 10/92 12040 A 12/94 12040 B 12/96 12040 C 12/98 12040 D 01/00 12040 E 03/03 12040 F 08/05 12040 G 01/09
D Alloy steel 0.5Mo 150 1 B -20 450 1208 05/79 1208 07/83 1208 07/84 1208 10/89 12080 O 10/92 12080 A 12/94 12080 B 12/96 12080 C 12/98 12080 D 01/00 12080 E 03/03 12080 F 08/05 11280
D Alloy steel 3.5 Ni LT 150 1 -80 1218 02/74 1218 05/79 1218 07/83 1218 02/86 1218 10/89 12180 O 10/92 12180 A 12/94 -
Alloy steel 9Cr-1Mo 150 1 B PWHT -20 538 12090 O 03/03 12090 A 08/05 12090 B 01/09
D Stainless steel AISI 321/347 150 0 1301 07/70 1301 02/74 1301 05/79 1301 07/83 1301 0774 1301 10/89 13010 O 10/92 13010 A 12/94 13011
D Stainless steel AISI 321/347 150 0 0 400 13011 O 12/94 13011 A 12/96 13011 B 12/98 13011 C 01/00 13011 D 03/03 13012
Stainless steel AISI 321/347 150 0 B -20 400 13012 O 08/05 13012 A 01/09
Stainl steel AISI 321/347 [A] 150 0 A -20 400 13013 O 01/09
Stainless steel AISI 321/347 150 0 B -20 400 H2 13015 O 08/05 13015 A 01/09
D Stainless steel AISI 316 150 0 1302 07/70 1302 02/74 1302 05/79 1302 07/83 1302 0686 1302 10/89 13020 O 10/92 13020 A 12/94 13021
Stainless steel AISI 316 150 0 B -20 400 13021 O 12/94 13021 A 12/96 13021 B 12/98 13021 C 01/00 13021 D 03/03 13021 E 08/05 13021 F 01/09
D Stainless steel AISI 316 150 0 1303 07/70 1303 02/74 1303 05/79 1303 07/83 1303 07/84 1303 10/89 13030 O 10/92 13030 A 12/94 13031
D Stainless steel AISI 316 150 0 B BS -20 200 13031 O 12/94 13031 A 12/96 13031 B 12/98 13031 C 01/00 13031 D 03/03 13031 E 08/05 13032
Stainless steel AISI 316 150 0 B ISO -20 150 13032 O 08/05 13032 A 01/09
Stainless steel AISI 316 150 0 A ISO -20 150 13033 O 08/05 13033 A 01/09
D Stainless steel AISI 321/347 150 0 0 450 13050 O 03/03 13052
Stainless steel AISI 321/347 150 0 B -20 450 13052 O 08/05 13052 A 01/09
Stainless steel AISI 321 stab HT 150 0 B -20 500 H2 13055 O 08/05 13055 A 01/09
D Stainless steel AISI 321/347 150 0 1306 07/70 1306 02/74 1306 05/79 1306 07/83 1306 07/84 -
Stainl steel AISI 304 150 0 B ISO -20 150 13081 O 01/09
Stainl steel AISI 304 [A] 150 0 A ISO -20 150 13083 O 01/09
Stainl steel AISI 304 [A] 150 0 A ISO -20 150 13085 O 01/09
Stainl steel AISI 304 150 0 B -20 400 13086 O 01/09
D Stainless steel AISI 316 150 0 1307 07/70 1307 02/74 -
D Stainless steel AISI 304 150 0 -200 1309 07/70 1309 02/74 1309 05/79 1309 07/83 1309 02/86 1309 10/89 13090 O 10/92 13090 O 1092 13091
D Stainless steel AISI 304 150 0 B BS -200 200 13091 O 12/94 13091 A 12/96 13091 B 12/98 13091 C 01/00 13091 D 03/03 13091 E 08/05 13092
Stainless steel AISI 304 150 0 B ISO -200 200 13092 O 08/05 13092 A 01/09
Stainless steel AISI 304 150 0 B -200 300 13095 O 08/05 13095 A 01/09
D Stainless steel AISI 316 150 0 MV 1310 07/70 1310 02/74 1310 05/79 1310 07/83 1310 07/84 -
D Stainless steel AISI 316 150 0 A -20 200 EO 13100 O 12/96 13100 A 12/98 13100 B 01/00 13100 C 03/03 13100 D 08/05 13101
Stainless steel AISI 316 150 0 A -20 150 EO 13101 O 08/05 13101 A 01/09
D Stainless steel AISI 316 150 0 HV 1311 07/70 1311 02/74 1311 05/79 1311 07/83 1311 02/86 1311 10/89 13110 O 10/92 13110 A 12/94 -
D Stainless steel AISI 316 150 0 Slurry 1313 07/70 1313 02/74 1313 05/79 1313 07/83 1313 07/84 1313 10/89 13130 O 10/92 13130 O 10/92 13131
D Stainless steel AISI 316 150 0 13131 O 12/94 -
D Stainless steel AISI 321/347 150 0 1314 02/74 1314 05/79 1314 07/83 1314 07/84 1314 10/89 13140 O 10/92 13140 A 12/94 -
D Stainless steel AISI 321/347 150 0 HV 1319 07/70 1319 02/74 1319 05/79 1319 07/83 1319 02/86 -
Stainless steel AISI 304 150 0 A ISO -200 200 13191 O 08/05 13191 A 01/09
D Stainless steel AISI 321/347 150 0 MV 1320 07/70 1320 02/74 1320 05/79 1320 07/83 1320 07/84 -
D Stainless steel AISI 304 150 0 1323 05/79 1323 07/83 1323 07/84 -
D Stainless steel AISI 304 150 0 1324 05/79 -
D Stainless steel AISI 321/347 150 0 1330 07/83 1330 07/84 1330 10/89 13300 O 10/92 13300 A 12/94 13100
D Stainless steel AISI 321/347 150 0 1331 05/79 1331 07/83 1331 07/84 -
D Stainless steel AISI 316 150 0 1332 05/79 1332 07/83 1332 07/84 -
D Stainless steel AISI 304 150 0 1333 05/79 1333 07/83 1333 07/84 -
D Aluminium alloy 5454 150 0 401 04/66 not issued 1401 02/74 1401 05/79 1401 07/83 1401 02/86 -
D Aluminium alloy 5454 150 0 1402 07/70 1402 02/74 1402 05/79 1402 07/83 1402 02/86 1402 10/89 14020 O 10/92 14020 A 12/94 14021
D Aluminium alloy 5454 150 0 14021 O 12/94 -
D Aluminium Brass 150 0 501 04/66 1501 07/70 1501 02/74 1501 05/79 not issued 1501 02/86 1501 10/89 15010 O 10/92 15010 O 1092 15011
D Aluminium Brass 150 0 15011 O 12/94 15011 O 1294 15011 A 12/98 15011 B 01/00 17320
D Nickel 150 0 601 04/66 1601 07/70 1601 02/74 1601 05/79 1601 07/83 1601 07/84 -
D Ni-Cu alloy Monel 400 150 0 NaOH 602 04/66 1602 07/70 1602 02/74 1602 05/79 1602 07/83 1602 07/84 1602 10/89 16020 O 10/92 16020 A 12/94 16021
D Ni-Cu alloy Monel 400 150 0 A BS -20 200 16021 O 12/94 16021 A 12/96 16021 A 12/96 16021 B 01/00 16021 C 03/03 16021 D 08/05 16022
Ni-Cu alloy Monel 400 150 0 A ISO -20 150 16022 O 08/05 16022 A 01/09
D Ni-Cu alloy Monel 400 150 0 1603 07/70 1603 02/74 1603 05/79 1603 07/83 1603 07/84 -
D Ni-Cr-Fe alloy Inconel 600 150 0 1604 07/70 1604 02/74 1604 05/79 1604 07/83 1604 07/84 -
D Ni-Cr-Fe alloy Inconel 600 150 0 1606 07/70 1606 02/74 1606 05/79 1606 07/83 1606 07/84 -
D Ni-Cu alloy Hastelloy B2 150 0 1607 07/70 1607 02/74 1607 05/79 1607 07/83 1607 07/84 1607 10/89 16070 O 10/92 16070 A 12/94 16071
D Ni-Cu alloy Hastelloy B2 150 0 A BS -20 200 16071 O 12/94 16071 A 0996 16071 B 12/98 16071 C 01/00 16071 D 03/03 16071 E 08/05 16072
Ni-Cu alloy Hastelloy B2 150 0 A ISO -20 150 16072 O 08/05 16072 A 01/09
D PVC 150 0 701 04/66 1701 07/70 1701 02/74 1701 05/79 not issued 1701 02/86 -
D GRE-Aromatic Amine 150 0 17010 O 12/98 17010 A 01/00 17011
GRE-Aromatic Amine 150 0 - ISO 0 100 17011 O 03/03 17011 A 08/05 17011 B 01/09
GRVE-Bisphenol A 150 0 - ISO 0 100 17012 O 03/03 17012 A 08/05 17012 B 01/09
GRE-Aliphatic amine al. foil 150 0 - ISO 0 85 Potable w 17015 O 03/03 17015 A 08/05 17015 B 01/09
D PVC 150 0 702 04/66 1702 07/70 1702 02/74 1702 05/79 not issued 1702 02/86 1702 10/89 -
D GRE-Aromatic Amine 150 0 17020 O 01/00 -
D HDPE 150 0 1703 07/70 1703 02/74 1703 05/79 not issued 1703 07/84 1703 10/89 -
D GRE-Aromatic Amine 150 0 Sour 17030 O 01/00 -
D Polypropylene 150 0 1704 07/70 1704 02/74 1704 05/79 not issued 1704 07/84 1704 10/89 -
D GRE 150 0 Chem. 1705 02/74 1705 05/79 not issued 1705 07/84 1705 10/89 17050 O 10/92 17050 O 1092 -
D GRE 150 0 Gen. 1706 02/74 1706 05/79 not issued 1706 02/86 1706 10/89 17060 O 10/92 17060 O 1092 -
D GRE 150 0 17061 O 12/94 17061 A 12/96 -

Page 2 of 7
History of R+C Piping Classes
Material ASME Ca Em Ball Service Apr 1966 Jul 1970 Feb 1974 May 1979 Sep 1983 Feb 1986 Oct 1989 Oct 1992 Dec 1994 Dec 1996 Jan 1999 Jan 2000 Mar 2003 Aug 2005 Jan 2009 = replaced by
rating cl valveSour PWHT T - T+ Special PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev = not replaced

D GRE-Aliphatic Amine 150 0 17070 O 12/94 17070 A 12/96 17070 B 12/98 17070 B 12/98 17011
D GRE-Aliphatic Amine + Alum. foil 150 0 17075 O 12/98 17075 O 12/98 17015
D GRE General service 150 0 Gen. 1708 02/86 -
D GRE 150 0 1709 10/89 17090 O 10/92 17090 O 1092 17090 A 12/96 17310
D GRE 150 0 1710 10/89 17100 O 10/92 17100 O 1092 17101
D GRE-Aliphatic Amine 150 0 17101 O 12/94 17101 A 12/96 17101 B 12/98 17101 B 12/98 17102
GRVE-Bisphenol A 150 0 - 0 85 Fire f. 17102 O 03/03 17102 A 08/05 17102 B 01/09
D GRE 150 0 Fire f. 1711 10/89 17110 O 10/92 17110 O 1092 17110 A 12/96 17122
D GRE 150 0 Cooling w 1711 10/89 17110 O 10/92 17110 O 1092 17110 A 12/96 17320
GRVE-Bisphenol A 150 0 A ISO 0 100 17112 O 08/05 17112 A 01/09
D GRE-Aliphatic Amine 150 0 1712 10/89 17120 O 10/92 17120 O 1092 17120 A 12/96 17120 B 12/98 17120 B 12/98 17121
D GRVE-Bisphenol A 150 0 -5 85 Fire f. 17121 O 03/03 17122
GRVE-Bisphenol A 150 0 - ISO -5 85 Fire f. 17122 O 08/05 17122 A 01/09
D HDPE 150 0 1713 10/89 -
GRVE-Bisphenol A 150 0 - 0 85 17130 O 08/05 17130 A 01/09
D GRE 150 0 17160 O 12/94 17160 A 12/96 17010
D GRVE-Novolac epoxy 150 0 17200 O 12/98 17200 O 12/98 17201
Epoxy Novolac 150 0 A ISO 0 80 17201 O 03/03 17201 A 08/05 17201 B 01/09
D GRVE-Bisphenol A 150 0 17210 O 12/98 17210 O 12/98
D GRVE-Novolac epoxy 150 0 17220 O 12/98 17200
D GRVE-Bisphenol A 150 0 17230 O 12/98 17230 O 12/98
D GRVE-UPVC 150 0 0 60 17240 O 06/00 -
D GRUP-Isophthalic 150 0 17310 O 12/98 17310 O 12/98 -
GRUP-Isophthalic 150 0 - 0 60 17311 O 03/03 17311 A 08/05 17311 B 01/09
GRUP-Isophthalic 150 0 - -5 60 17320 O 12/98 17320 O 12/98 17320 B 03/03 17320 C 08/05 17320 D 01/09
D Carbon steel Galvanised 150 0 1801 07/70 1801 02/74 1801 05/79 not issued 1801 07/84 1801 10/89 18010 O 10/92 18010 A 12/94 18011
Carbon steel Galvanised 150 0 - 0 90 18011 O 12/94 18011 A 12/96 18011 B 12/98 18011 C 01/00 18011 D 03/03 18011 E 08/05 18011 F 01/09
D Carbon steel Bitumen-lined 150 0 1802 07/70 1802 02/74 1802 05/79 not issued 1802 02/86 -
D Carbon steel Cement lined 150 0 1803 07/70 1803 02/74 1803 05/79 not issued 1803 02/86 not issued 18030 O 10/92 18030 A 12/94 18030 A 12/96 17320
D Carbon steel Rubber lined 150 0 1804 07/70 1804 02/74 1804 05/79 not issued 1804 02/86 not issued 18040 O 10/92 18040 O 1092 18040 A 12/96 18040 B 12/98 -
D Carbon steel Bitumen-lined 150 0 Fire f. 1805 07/70 1805 02/74 1805 05/79 1805 07/83 1805 02/86 -
D Carbon steel Cement lined 150 0 Fire f. 1806 07/70 1806 02/74 1806 05/79 1806 07/83 1806 02/86 -
D Carbon steel Polyprop lined 150 0 1807 07/70 1807 02/74 1807 05/79 not issued 1807 07/84 not issued not issued 18070 O 12/94 18070 A 12/96 18070 B 12/98 18160
D Carbon steel Galvanised 150 0 1808 07/70 1808 02/74 1808 05/79 not issued 1808 07/84 1808 10/89 18080 O 10/92 18080 A 12/94 18081
D Carbon steel Galvanised 150 0 0 200 18081 O 12/94 18081 A 12/96 18081 B 12/98 18081 C 01/00 18081 D 03/03 18011
D Carbon steel Rubber lined 150 0 1809 07/70 1809 02/74 -
D Carbon steel Galvanised 150 0 18100 O 10/92 18100 O 1092 18101
D Carbon steel Galvanised 150 0 18101 O 12/94 18101 A 12/96 18101 B 12/98 18011
D Carbon steel Glass lined 150 0 1811 07/70 1811 02/74 1811 05/79 -
D Carbon steel Glass lined 150 0 1812 07/70 1812 02/74 1812 05/79 not issued 1812 07/84 1812 10/89 18120 O 10/92 18120 A 12/94 18120 A 12/96 18120 B 12/98 -
Carbon steel PTFE-lined 150 0 A ISO -20 150 1816 07/70 1816 02/74 1816 05/79 not issued 1816 07/84 not issued not issued 18160 O 12/94 18160 A 12/96 18160 B 12/98 18160 C 01/00 18160 D 03/03 18160 E 08/05 18160 F 01/09
Carbon steel 300 1 A -20 400 31000 O 08/05 31000 A 01/09
Carbon steel 300 1 B ISO 0 150 31001 O 08/05 31001 A 01/09
Carbon steel F-Gr 300 1 B ISO -20 150 31001-20 O 08/05 31001-20 A 01/09
Carbon steel F-Gr 300 1 B ISO -20 150 31001-KS O 08/05 31001-KS A 01/09
Carbon steel 300 1 A ISO -20 150 31002 O 08/05 31002 A 01/09
Carbon steel F-Gr 300 1 A ISO -20 150 31002-KS O 08/05 31002-KS A 01/09
Carbon steel 300 3 A ISO 0 150 31003 O 08/05 31003 A 01/09
Carbon steel F-Gr 300 3 A ISO -20 150 31003-KS O 08/05 31003-KS A 01/09
Carbon steel 300 1 B ISO Mod PWHT 0 150 31005 O 08/05 31005 A 01/09
Carbon steel 300 3 B ISO Mod PWHT 0 150 31007 O 08/05 31007 A 01/09
Carbon steel 300 3 B ISO Mod PWHT -20 150 31007-20 O 08/05 31007-20 A 01/09
Carbon steel 300 3 A ISO Mod PWHT 0 150 31008 O 08/05 31008 A 01/09
Carbon steel F-Gr 300 3 A ISO Mod PWHT -20 150 31008-KS O 08/05 31008-KS A 01/09
Carbon steel M-Sour PWHT[A] 300 3 A ISO Mod PWHT 0 200 Sodium hydroxide (Caustic soda) 31009 O 01/09
D Carbon steel 300 1 101 04/66 3101 07/70 3101 02/74 3101 05/79 3101 07/83 3101 02/86 3101 10/89 31010 O 10/92 31010 A 12/94 31011
Carbon steel 300 1 B 0 400 31011 O 12/94 31011 A 12/96 31011 A 12/96 31011 B 01/00 31011 C 03/03 31011 D 08/05
31011 E 01/09
Carbon steel 300 1 B -20 400 31011-20 O 08/05
31011-20 A 01/09
Carbon steel 300 1 B 0 400 31012 O 12/96 31012 A 12/98 31012 B 01/00 31012 C 03/03 31012 D 08/05
31012 E 01/09
Carbon steel 300 1 B -20 400 31012-20 O 08/05
31012-20 A 01/09
Carbon steel 300 1 B Mod PWHT 0 400 31013 O 12/94 31013 A 12/96 31013 A 12/96 31013 B 01/00 31013 C 03/03 31013 D 08/05
31013 E 01/09
Carbon steel 300 1 B Mod PWHT -20 400 31013-20 O 08/05
31013-20 A 01/09
Carbon steel 300 1 B -20 427 31014 O 01/09
Carbon steel 300 1 B High 0 400 31015 O 12/94 31015 A 12/96 31015 A 12/96 31015 B 01/00 31015 C 03/03 31015 D 08/05 31015 E 01/09
Carbon steel F-Gr 300 1 B High -20 400 31015-KS O 08/05 31015-KS A 01/09
D Carbon steel 300 1 102 04/66 not issued 3102 02/74 3102 05/79 3102 07/83 3102 02/86 3102 10/89 31020 O 10/92 31020 A 12/94 31021
D Carbon steel 300 1 B BS -20 200 31021 O 12/94 31021 B 12/96 31021 A 12/96 31021 B 01/00 31021 C 03/03 31021 D 08/05 31001-20
D Carbon steel 300 1 PWHT 31022 O 10/92 31022 A 12/94 31023
D Carbon steel 300 1 B BS Mod PWHT -20 200 31023 O 12/94 31023 A 12/96 31023 A 12/96 31023 B 01/00 31023 C 03/03 31023 D 08/05 31005
D Carbon steel 300 3 B BS High PWHT 0 210 Amine 31025 O 12/96 31025 A 12/98 31025 B 01/00 31025 C 03/03 31025 D 08/05 31026
Carbon steel 300 3 B ISO High PWHT 0 210 Amine 31026 O 08/05 31026 A 01/09
Carbon steel F-Gr 300 3 B ISO High PWHT -20 210 Amine 31026-KS O 08/05 31026-KS A 01/09
D Carbon steel 300 3 103 04/66 3103 07/70 3103 02/74 3103 05/79 3103 07/83 3103 07/84 3103 10/89 31030 O 10/92 31030 A 12/94 31031
Carbon steel 300 3 B 0 400 31031 O 12/94 31031 A 12/96 31031 B 12/98 31031 C 01/00 31031 D 03/03 31031 E 08/05 31031 F 01/09
Carbon steel F-Gr 300 3 B -20 340 31031-KS O 08/05 31031-KS A 01/09
Carbon steel 300 1 B ISO High 0 150 31035 O 08/05 31035 A 01/09
Carbon steel F-Gr 300 1 B ISO High -20 150 31035-KS O 08/05 31035-KS A 01/09
Carbon steel 300 3 B ISO High 0 150 31036 O 08/05 31036 A 01/09
Carbon steel F-Gr 300 3 B ISO High -20 150 31036-KS O 08/05 31036-KS A 01/09
D Carbon steel 300 3 104 04/66 3104 07/70 3104 02/74 3104 05/79 3104 07/83 3104 07/84 3104 10/89 31040 O 10/92 31040 A 12/94 see note
Carbon steel 300 1 B Mod 0 400 31041 O 12/96 31041 O 12/96 31041 A 01/00 31041 B 03/03 31041 C 08/05 31041 D 01/09
Carbon steel F-Gr 300 1 B Mod -20 400 31041-20 O 08/05 31041-20 A 01/09
Carbon steel 300 3 B Mod 0 400 31042 O 12/96 31042 O 12/96 31042 A 01/00 31042 B 03/03 31042 C 08/05 31042 D 01/09
Carbon steel F-Gr 300 3 B Mod -20 400 31042-20 O 08/05 31042-20 A 01/09
D Carbon steel 300 3 105 04/66 3105 07/70 3105 02/74 3105 05/79 3105 07/83 3105 07/84 3105 10/89 31050 O 10/92 31050 A 12/94 31031
D Carbon steel 300 3 31051 O 12/94 31031
Carbon steel 300 3 B High 0 400 31055 O 12/94 31055 A 12/96 31055 A 12/96 31055 B 01/00 31055 C 03/03 31055 D 08/05 31055 E 01/09
D Carbon steel 300 1 106 04/66 3106 07/70 3106 02/74 3106 05/79 3106 07/83 3106 07/84 3106 10/89 31060 O 10/92 31060 A 12/94 31011
Carbon steel 300 3 B High -20 400 31055-20 O 08/05 31055-20 A 01/09
Carbon steel 300 1 B Mod 0 150 31061 O 08/05 31061 A 01/09
Carbon steel F-Gr 300 1 B Mod -20 150 31061-KS O 08/05 31061-KS A 01/09

Page 3 of 7
History of R+C Piping Classes
Material ASME Ca Em Ball Service Apr 1966 Jul 1970 Feb 1974 May 1979 Sep 1983 Feb 1986 Oct 1989 Oct 1992 Dec 1994 Dec 1996 Jan 1999 Jan 2000 Mar 2003 Aug 2005 Jan 2009 = replaced by
rating cl valveSour PWHT T - T+ Special PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev = not replaced

D Carbon steel 300 1 107 04/66 3107 07/70 3107 02/74 not issued not issued not issued 3107 10/89 31070 O 10/92 31070 A 12/94 31071
Carbon steel 300 1 B Mod 0 400 H2 31071 O 12/94 31071 A 12/96 31071 A 12/96 31071 B 01/00 31071 C 03/03 31071 D 08/05 31071 E 01/09
Carbon steel F-Gr 300 1 B Mod -20 340 H2 31071-KS O 08/05 31071-KS A 01/09
D Carbon steel 300 1 PWHT 31072 O 12/94
Carbon steel M-Sour [A] 300 1 A Mod 0 400 H2 31073 O 01/09
D Carbon steel 300 1 High 31075 O 12/94 31071
Carbon steel 300 3 B Mod 0 400 H2 31076 O 12/94 31076 A 12/96 31076 A 12/96 31076 B 01/00 31076 C 03/03 31076 D 08/05 31076 E 01/09
Carbon steel F-Gr 300 3 B Mod -20 340 H2 31076-KS O 08/05 31076-KS A 01/09
D Carbon steel 300 1 108 04/66 3108 07/70 3108 02/74 3108 05/79 3108 07/83 3108 02/86 3108 10/89 31080 O 10/92 31080 A 12/94 31021
D Carbon steel 300 1 31081 O 12/94 31021
Carbon steel LT 300 1 B ISO Mod -50 150 31085 O 08/05 31085 A 01/09
Carbon steel F-Gr 300 1 B ISO Mod PWHT 0 150 31086 O 08/05 31086 A 01/09
D Carbon steel 300 3 3109 07/70 3109 02/74 3109 05/79 3109 07/83 3109 02/86 3109 10/89 31090 O 10/92 31090 A 12/94 31091
D Carbon steel 300 3 A BS Mod 0 65 Sulf acid 31091 O 12/94 31091 A 12/96 31091 A 12/96 31091 B 01/00 31091 C 03/03 31091 D 08/05 31092
Carbon steel 300 3 A ISO Mod 0 65 Sulf acid 31092 O 08/05 31092 A 01/09
Carbon steel F-Gr 300 3 A ISO Mod -20 65 Sulf acid 31092-KS O 08/05 31092-KS A 01/09
D Carbon steel 300 1 LPG 3110 07/70 3110 02/74 3110 05/79 3110 07/83 -
D Carbon steel 300 1 LPG 111 04/66 3111 07/70 3111 02/74 3111 05/79 3111 07/83 3111 02/86 -
D Carbon steel 300 1 112 04/66 not issued not issued 3112 05/79 3112 07/83 3112 07/84 3112 10/89 31120 O 10/92 31120 A 12/94 31021
D Carbon steel 300 1 B BS High 0 200 31125 O 12/94 31125 A 12/96 31125 A 12/96 31125 B 01/00 31125 C 03/03 31125 D 08/05 31035
D Carbon steel 300 3 B BS High 0 200 31126 O 12/94 31126 A 12/96 31126 A 12/96 31126 B 01/00 31126 C 03/03 31126 D 08/05 31036
D Carbon steel 300 1 3113 10/89 31130 O 10/92 31130 A 12/94 31131
D Carbon steel 300 1 B BS 0 200 H2 31131 O 12/94 31131 A 12/96 31131 A 12/96 31131 B 01/00 31131 C 03/03 31131 D 08/05 31061
D Carbon steel 300 1 High 31135 O 12/94 31131
D Carbon steel 300 1 MV 3114 07/70 3114 02/74 3114 05/79 3114 07/83 3114 02/86 -
Carbon steel 300 1 A Mod 0 400 31141 O 08/05 31141 A 01/09
Carbon steel F-Gr 300 1 A Mod -20 340 31141-KS O 08/05 31141-KS A 01/09
Carbon steel 300 3 A Mod 0 400 31142 O 08/05 31142 A 01/09
Carbon steel F-Gr 300 3 A Mod -20 340 31142-KS O 08/05 31142-KS A 01/09
Carbon steel 300 1 (A) 0 410 HTF 31160 O 04/98 31160 A 01/00 31160 B 03/03 31160 C 08/05 31160 D 01/09
D Carbon steel 300 1 -25 3116 07/70
D Carbon steel LT 300 1 -50 3117 07/70 3117 02/74 3117 05/79 3117 07/83 3117 02/86 3117 10/89 31170 O 10/92 31170 O 1092 31172
D Carbon steel LT 300 1 PWHT -50 31171 O 10/92 31171 A 12/94 31173
D Carbon steel LT 300 1 B BS Mod -50 200 31172 O 12/94 31172 A 12/96 31172 B 12/98 31172 C 01/00 31172 D 03/03 31172 E 08/05 31085
D Carbon steel LT 300 1 B BS Mod PWHT -50 200 31173 O 12/94 31173 A 12/96 31173 B 12/98 31173 C 01/00 31173 D 03/03 31086 31086
Carbon steel LT 300 1 B Mod PWHT -50 340 31174 O 03/03 31174 A 08/05 31174 B 01/09
Carbon steel LT 300 1 B High -50 340 31175 O 12/94 31175 A 12/96 31175 A 12/96 31175 B 01/00 31175 C 03/03 31175 D 08/05 31175 E 01/09
Carbon steel LT 300 3 B High -50 340 31176 O 12/94 31176 A 12/96 31176 B 12/98 31176 C 01/00 31176 D 03/03 31176 E 08/05 31176 F 01/09
Carbon steel LT 300 1 B Mod -50 340 31180 O 03/03 31180 A 08/05 31180 B 01/09
D Alloy steel 3.5Ni 300 1 -75 3118 07/70 -
D Carbon steel 300 1 HV 3119 07/70 -
Carbon steel 300 3 B 0 200 Sulfur 31210 O 08/05 31210 O 08/05
D Carbon steel 300 1 MV 3122 07/70 -
D Carbon steel 300 1 H2 3123 07/70 3123 02/74 3123 05/79 3123 07/83 3123 07/84 -
D Carbon steel 300 3 HF 3124 02/74 3124 05/79 3124 07/83 3124 07/84 -
D Carbon steel 300 1 3125 05/79 -
D Carbon steel 300 1 Steam 3126 07/70 3126 02/74 3126 05/79 3126 07/83 3126 07/84 3126 10/89 31260 O 10/92 31260 A 12/94 31261
Carbon steel 300 1 B 0 400 Steam 31261 O 12/94 31261 A 12/96 31261 B 12/98 31261 C 01/00 31261 D 03/03 31261 E 08/05 31261 F 01/09
D Carbon steel 300 1 -50 Chlorine 3127 05/79 3127 07/83 3127 02/86 3127 10/89 31270 O 10/92 31270 A 12/94 31270
Carbon steel 300 1 A ISO -35 70 Chlorine 31271 O 12/94 31271 A 12/96 31271 A 12/96 31271 B 01/00 31271 C 03/03 31271 D 08/05 31271 E 01/09
D Carbon steel 300 1 -25 H2 3130 07/70 -
D Carbon steel 300 1 A BS 0 200 EO 3130 07/83 3130 02/86 3130 10/89 31300 O 10/92 31300 A 12/94 31300 B 12/96 31300 B 12/96 31300 C 01/00 31300 D 03/03 31300 D 08/05 31301
Carbon steel 300 1 A ISO 0 200 EO 31301 O 08/05 31301 A 01/09
Carbon steel F-Gr 300 1 A ISO -20 200 EO 31301-KS O 08/05 31301-KS A 01/09
D Carbon steel 300 1 -50 H2 3131 07/70 -
Carbon steel 300 3 A PWHT -15 150 HF 3131 07/83 3131 07/84 3131 10/89 not issued not issued not issued 31310 O 12/98 31310 A 01/00 31310 B 03/03 31310 C 08/05 31310 D 01/09
D Carbon steel 300 3 MV 3134 07/70 -
D Carbon steel 300 1 NaOH 136 04/66 3136 07/70 3136 02/74 3136 05/79 3136 07/83 3136 02/86 -
D Carbon steel 300 3 NaOH 137 04/66 3137 07/70 3137 02/74 3137 05/79 3137 07/83 3137 02/86 3137 10/89 31370 O 10/92 31370 A 12/94 31373
D Carbon steel 300 3 PWHT 31371 O 10/92 31371 A 12/94 31372
D Carbon steel 300 3 B BS Mod PWHT 0 200 31372 O 12/94 31372 A 12/96 31372 A 12/96 31372 B 01/00 31372 C 03/03 31372 D 08/05 31007
D Carbon steel 300 3 B BS 0 200 31373 O 12/94 31373 A 12/96 31373 A 12/96 31373 B 01/00 31373 C 03/03 31373 D 08/05 31003
Carbon steel 300 3 B Mod PWHT 0 400 31374 O 03/03 31374 A 08/05 31374 B 01/09
Carbon steel F-Gr 300 3 B Mod PWHT -20 340 31374-KS O 08/05 31374-KS A 01/09
Carbon steel LT 300 3 B Mod -50 340 31380 O 08/05 31380 A 01/09
Carbon steel LT 300 3 B Mod PWHT -50 340 31384 O 08/05 31384 A 01/09
D Alloy steel 1Cr-0.5Mo 300 ? 201 04/66 -
D Alloy steel 1.25Cr-0.5Mo 300 1 538 201 04/66 3201 07/70 3201 02/74 32011
Alloy steel 1.25Cr-0.5Mo 300 1 B PWHT -20 450 3201 05/79 3201 07/83 3201 07/84 3201 10/89 32010 O 10/92 32010 O 1092 32010 A 12/96 32010 B 12/98 32010 C 01/00 32010 D 03/03 32010 E 08/05 32010 F 01/09
Alloy steel 1.25Cr-0.5Mo 300 1 B PWHT 0 550 32011 A 03/03 32011 B 08/05 32011 C 01/09
Alloy steel 1.25Cr-0.5Mo 300 1 B 0 450 Steam 202 04/66 3202 02/74 3202 05/79 3202 07/83 3202 02/86 3202 10/89 32020 O 10/92 32020 A 12/94 32020 B 12/96 32020 C 12/98 32020 D 01/00 32020 E 03/03 32020 F 08/05 32020 G 01/09
Alloy steel 1.25Cr-0.5Mo 300 1 B 0 538 Steam 32021 O 12/94 32021 A 12/96 32021 B 12/98 32021 C 01/00 32021 D 03/03 32021 E 08/05 32021 F 01/09
D Alloy steel 5Cr-0.5Mo 300 1 450 203 04/66 3203 07/70 3203 02/74 3203 05/79 3203 07/83 3203 07/84 3203 10/89 32030 O 10/92 32030 A 12/94 32040
Alloy steel 5Cr-0.5Mo 300 1 B PWHT -20 450 204 04/66 3204 07/70 3204 02/74 3204 05/79 3204 07/83 3204 07/84 3204 10/89 32040 O 10/92 32040 A 12/94 32040 B 12/96 32040 C 12/98 32040 D 01/00 32040 E 03/03
32040 F 08/05 32040 G 01/09
D Alloy steel 0.5Mo 300 1 B -20 450 3208 05/79 3208 07/83 3208 07/84 3208 10/89 32080 O 10/92 32080 O 1092 32080 A 12/96 32080 B 12/98 32080 C 01/00 32080 E 03/03
32080 F 08/05 31280
Alloy steel 9Cr-1Mo 300 1 B PWHT -20 550 32090 O 03/03
32090 A 08/05 32090 B 01/09
Alloy steel 1.25Cr-0.5Mo 300 1 B PWHT -20 400 H2 3211 10/89 32110 O 10/92 32110 O 1092 32110 A 12/96 32110 B 12/98 32110 C 01/00 32110 D 03/03
32110 E 08/05 32110 F 01/09
Alloy steel 1.25Cr-0.5Mo 300 1 B PWHT -20 500 H2 32120 A 08/05 32120 B 01/09
Alloy steel 1.25Cr-0.5Mo 300 1 B PWHT -20 550 H2 32121 A 03/03 32121 B 08/05 32121 C 01/09
D Alloy steel 3.5 Ni 300 1 -80 3218 02/74 3218 05/79 3218 07/83 3218 02/86 3218 10/89 32180 O 10/92 32180 O 1092 -
D Stainless steel AISI 321/347 300 0 301 04/66 3301 07/70 3301 02/74 3301 05/79 3301 07/83 3301 07/84 3301 10/89 33010 O 10/92 33010 A 12/94 33011
D Stainless steel AISI 321/347 300 0 0 400 33011 O 12/94 33011 A 12/96 33011 B 12/98 33011 C 01/00 33011 D 03/03 33012
Stainless steel AISI 321/347 300 0 B -20 400 33012 O 08/05 33012 A 01/09
Stainl steel AISI 321/347 [A] 300 0 A -20 400 Seal Gas 33013 O 01/09
Stainless steel AISI 321/347 300 0 B -20 400 H2 33015 O 08/05 33015 A 01/09
D Stainless steel AISI 316 300 0 3302 07/70 3302 02/74 3302 05/79 3302 07/83 3302 07/84 3302 10/89 33020 O 10/92 33020 A 12/94 33021
Stainless steel AISI 316 300 0 B -20 400 33021 O 12/94 33021 A 12/96 33021 B 12/98 33021 C 01/00 33021 D 03/03 33021 E 08/05 33021 F 01/09
D Stainless steel AISI 316 300 0 3303 07/70 -
Stainl steel AISI 316 300 1 B 33026 B 01/09
D Stainless steel AISI 316 300 0 B BS -20 200 33031 O 12/94 33031 A 12/96 33031 B 12/98 33031 C 01/00 33031 D 03/03 33031 E 08/05 33032
Stainless steel AISI 316 300 0 B ISO -20 150 33032 O 08/05 33032 A 01/09

Page 4 of 7
History of R+C Piping Classes
Material ASME Ca Em Ball Service Apr 1966 Jul 1970 Feb 1974 May 1979 Sep 1983 Feb 1986 Oct 1989 Oct 1992 Dec 1994 Dec 1996 Jan 1999 Jan 2000 Mar 2003 Aug 2005 Jan 2009 = replaced by
rating cl valveSour PWHT T - T+ Special PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev = not replaced

Stainless steel AISI 316 300 0 A ISO -20 150 33033 O 08/05 33033 A 01/09
D Stainless steel AISI 316 300 0 3304 07/70 3304 02/74 -
D Stainless steel AISI 321/347 300 0 0 450 3305 07/70 3305 02/74 3305 05/79 3305 07/83 3305 07/84 3305 10/89 33050 O 10/92 33050 A 12/94 33050 B 12/96 33050 C 12/98 33050 D 01/00 33050 E 03/03 33052
Stainless steel AISI 321/347 300 0 B -20 450 33052 O 08/05 33052 A 01/09
Stainless steel AISI 321 Stab HT 300 0 B -20 538 H2 33055 O 12/94 33055 A 12/96 33055 B 12/98 33055 C 01/00 33055 D 03/03 33055 E 08/05 33055 F 01/09
D Stainless steel AISI 321/347 300 0 3306 07/70 -
D Stainless steel AISI 304 300 0 -105 3308 07/70 -
Stainl steel AISI 304 300 0 B ISO -20 150 33081 O 01/09
Stainl steel AISI 304 [A] 300 0 A ISO -20 150 33083 O 01/09
Stainl steel AISI 304 [A] 300 0 A ISO -20 150 EO 33085 O 01/09
Stainl steel AISI 304 300 0 B -20 400 33086 O 01/09
D Alloy 400 PWHT [A] 300 0 -200 3309 07/70 3309 02/74 3309 05/79 3309 07/83 3309 02/86 3309 10/89 33090 O 10/92 33090 O 1092 33091
D Stainless steel AISI 304 300 0 B BS -200 200 33091 O 12/94 33091 A 12/96 33091 A 12/96 33091 B 01/00 33091 C 03/03 33091 D 08/05 33092
Stainless steel AISI 304 300 0 B ISO -200 200 33092 O 08/05 33092 A 01/09
Stainless steel AISI 304 300 0 B -200 200 33095 O 08/05 33095 A 01/09
D Stainless steel AISI 316 300 0 MV 3310 07/70 3310 02/74 3310 05/79 3310 07/83 3310 07/84 -
D Stainless steel AISI 316 300 0 A 0 200 EO 33100 O 12/96 33100 O 12/96 33100 A 01/00 33100 B 03/03 33100 C 08/05 33101
Stainless steel AISI 316 300 0 A -20 150 EO 33101 O 08/05 33101 A 01/09
D Stainless steel AISI 316 300 0 Slurry 3313 07/70 3313 02/74 3313 05/79 3313 07/83 3313 07/84 3313 10/89 33130 O 10/92 33130 A 12/94 -
D Stainless steel AISI 316 300 0 33131 O 12/94 -
D Stainless steel AISI 321/347 300 0 3314 02/74 3314 05/79 3314 07/83 3314 07/84 3314 10/89 33140 O 10/92 33140 O 12/94 -
D Stainless steel AISI 304 300 0 -105 H2 3315 07/70 -
D Stainless steel AISI 304 300 0 -200 H2 3316 07/70 -
Stainless steel AISI 304 300 0 A ISO -200 150 33191 O 08/05 33191 A 01/09
D Stainless steel AISI 321/347 300 0 3320 07/70 3320 02/74 3320 05/79 3320 07/83 3320 07/84 -
D Stainless steel AISI 304 300 0 3324 05/79 3324 07/83 3324 07/84 -
D Stainless steel AISI 321/347 300 0 EO 3330 07/83 3330 07/84 3330 10/89 33300 O 10/92 33300 A 12/94 33100
D Stainless steel AISI 321/347 300 0 3331 05/79 3331 07/83 3331 07/84 -
D Stainless steel AISI 316 300 0 3332 05/79 3332 07/83 3332 07/84 -
D Stainless steel AISI 304 300 0 3333 05/79 3333 07/83 3333 07/84 -
D Nickel 300 0 601 04/66 3601 07/70 3601 02/74 3601 05/79 3601 07/83 3601 07/84 -
D Ni-Cr-Fe alloy Inconel 600 300 0 3604 07/70 3604 02/74 3604 05/79 3604 07/83 3604 07/84 -
D Ni-Cu alloy Monel 400 300 0 3605 07/70 3605 02/74 3605 05/79 3605 07/83 3605 07/84 -
D Ni-Cr-Fe alloy Inconel 600 300 0 3606 07/70 3606 02/74 3606 05/79 3606 07/83 3606 07/84 -
D Ni-Cu alloy Hastelloy B2 300 0 A BS -20 200 36071 O 09/96 36071 O 09/96 36071 A 01/00 36071 B 03/03 36071 B 08/05 36072
Ni-Cu alloy Hastelloy B2 300 0 A ISO -20 150 36072 O 08/05 36072 A 01/09
Ni-Cu alloy Monel 400 300 0 A PWHT -20 200 HF 3608 02/74 3608 05/79 3608 07/83 3608 02/86 3608 10/89 not issued not issued not issued 36080 O 12/98 36080 A 01/00 36080 B 03/03 36080 C 08/05 36080 D 01/09
Alloy 400 PWHT [A] 300 3 A PWHT -20 200 Hydrogen fluoride (Hydrofluoric acid) 36081 O 01/09
D Ni-Cr-Fe alloy Inconel 600 300 0 3612 05/79 3612 07/83 3612 07/84 -
D Carbon steel 600 1 101 04/66 6101 07/70 6101 02/74 6101 05/79 6101 07/83 6101 07/84 6101 10/89 61010 O 10/92 61010 A 12/94 61011
Carbon steel 600 1 B 0 400 61011 O 12/94 61011 A 12/96 61011 B 12/98 61011 C 01/00 61011 D 03/03 61011 E 08/05 61011 F 01/09
Carbon steel 600 1 B -20 400 61011-20 O 08/05 61011-20 A 01/09
Carbon steel 600 1 B Mod PWHT 0 400 61013 O 12/94 61013 A 12/96 61013 B 12/98 61013 C 01/00 61013 D 03/03 61013 E 08/05 61013 F 01/09
Carbon steel 600 1 B Mod PWHT -20 400 61013-20 O 08/05 61013-20 A 01/09
Carbon steel 600 1 B High 0 400 61015 O 12/94 61015 A 12/96 61015 B 12/98 61015 C 01/00 61015 D 03/03 61015 E 08/05 61015 F 01/09
Carbon steel F-Gr 600 1 B High -20 340 61015-KS O 08/05 61015-KS A 01/09
Carbon steel 600 3 B 0 400 61031 O 12/96 61031 A 12/98 61031 B 01/00 61031 C 03/03 61031 D 08/05 61031 E 01/09
Carbon steel F-Gr 600 3 B -20 340 61031-KS O 08/05 61031-KS A 01/09
Carbon steel 600 1 B Mod 0 400 61041 O 12/96 61041 A 12/98 61041 B 01/00 61041 C 03/03 61041 D 08/05 61041 E 01/09
Carbon steel 600 1 B Mod -20 400 61041-20 O 08/05 61041-20 A 01/09
Carbon steel 600 3 B Mod 0 400 61042 O 12/96 61042 A 12/98 61042 B 01/00 61042 C 03/03 61042 D 08/05 61042 E 01/09
Carbon steel 600 3 B Mod -20 400 61042-20 O 08/05 61042-20 A 01/09
D Carbon steel 600 3 6105 02/74 6105 05/79 6105 07/83 6105 07/84 6105 10/89 61050 O 10/92 61050 A 12/94 61031
D Carbon steel 600 3 61051 O 12/94 61031
Carbon steel 600 3 B High 0 400 61055 O 12/94 61055 A 12/96 61055 B 12/98 61055 C 01/00 61055 D 03/03 61055 E 08/05 61055 F 01/09
Carbon steel 600 3 B High -20 400 61055-20 O 08/05 61055-20 A 01/09
D Carbon steel 600 1 106 04/66 6106 07/70 6106 02/74 6106 05/79 6106 07/83 6106 07/84 6106 10/89 61060 O 10/92 61060 A 12/94 61011
D Carbon steel 600 1 6107 10/89 61070 O 10/92 61070 A 12/94 61071
Carbon steel 600 1 B Mod 0 400 H2 61071 O 12/94 61071 A 12/96 61071 B 12/98 61071 C 01/00 61071 D 03/03 61071 E 08/05 61071 F 01/09
Carbon steel F-Gr 600 1 B Mod -20 340 H2 61071-KS O 08/05 61071-KS A 01/09
Carbon steel M-Sour [A] 600 1 A Mod 0 400 H2 61073 O 01/09
D Stainl steel AISI 321/347 [A] 600 1 High 61075 O 12/94 61071
Carbon steel 600 3 B Mod 0 400 H2 61076 O 12/94 61076 A 12/96 61076 B 12/98 61076 C 01/00 61076 D 03/03 61076 E 08/05 61076 F 01/09
Carbon steel F-Gr 600 3 B Mod -20 340 H2 61076-KS O 08/05 61076-KS A 01/09
Carbon steel 600 1 A Mod 0 400 61141 O 08/05 61141 A 01/09
Carbon steel F-Gr 600 1 A Mod -20 340 61141-KS O 08/05 61141-KS A 01/09
Carbon steel 600 3 A Mod 0 400 61142 O 08/05 61142 A 01/09
Carbon steel F-Gr 600 3 A Mod -20 340 61142-KS O 08/05 61142-KS A 01/09
Carbon steel 600 1 B 0 410 HTF 61160 O 08/05 61160 A 01/09
D Carbon steel 600 1 -50 61170 O 10/92 61170 A 12/94 61172
D Carbon steel 600 1 -50 61172 O 12/94 61172 A 12/96 61172 B 12/98 61172 C 01/00 61180
D Carbon steel 600 1 PWHT -50 61173 O 12/94 61173 A 12/96 61173 B 12/98 61173 C 01/00 61174
Carbon steel 600 1 B Mod PWHT -50 340 61174 O 03/03 61174 A 08/05 61174 B 01/09
Carbon steel 600 1 B High -50 340 61176 O 08/05 61176 A 01/09
Carbon steel 600 1 B Mod -50 340 61180 O 03/03 61180 A 08/05 61180 B 01/09
D Carbon steel 600 1 6126 07/70 6126 02/74 6126 05/79 6126 07/83 6126 07/84 6126 10/89 61260 O 10/92 61260 A 12/94 61261
Carbon steel 600 1 B 0 400 Steam 61261 O 12/94 61261 A 12/96 61261 B 12/98 61261 C 01/00 61261 D 03/03 61261 E 08/05 61261 F 01/09
D Carbon steel 600 1 NaOH 6136 02/74 6136 05/79 6136 07/83 6136 07/84 -
D Carbon steel 600 3 NaOH 6137 02/74 6137 05/79 6137 07/83 6137 02/86 6137 10/89 61370 O 10/92 61370 A 12/94 61031
D Carbon steel 600 3 Mod PWHT 61371 O 10/92 61371 A 12/94 61371 B 12/96 61371 C 12/98 61371 D 01/00 61374
Carbon steel 600 3 B Mod PWHT 0 400 61374 O 03/03 61374 A 08/05 61374 B 01/09
Carbon steel F-Gr 600 3 B Mod PWHT -20 340 61374-KS O 08/05 61374-KS A 01/09
Carbon steel LT 600 3 B Mod -50 340 61380 O 08/05 61380 A 01/09
Carbon steel LT 600 3 B Mod PWHT -50 340 61384 O 08/05 61384 A 01/09
D Alloy steel 1Cr-0.5Mo 600 ? 201 04/66 -
D Alloy steel 1.25Cr-0.5Mo 600 1 538 201 04/66 6201 07/70 6201 02/74 -
Alloy steel 1.25Cr-0.5Mo 600 1 B PWHT -20 450 6201 05/79 6201 07/83 6201 07/84 6201 10/89 62010 O 10/92 62010 A 12/94 62010 B 12/96 62010 C 12/98 62010 D 01/00 62010 E 03/03 62010 F 08/05 62010 G 01/09
Alloy steel 1.25Cr-0.5Mo 600 1 B PWHT -20 550 62011 A 03/03 62011 B 08/05 62011 C 01/09
D Alloy steel 1Cr-0.5Mo 600 ? 202 04/66 -
Alloy steel 1.25Cr-0.5Mo 600 1 B 0 450 Steam 6202 07/70 6202 02/74 6202 05/79 6202 07/83 6202 07/84 6202 10/89 62020 O 10/92 62020 A 12/94 62020 B 12/96 62020 C 12/98 62020 D 01/00 62020 E 03/03 62020 F 08/05 62020 G 01/09
Alloy steel 1.25Cr-0.5Mo 600 1 B 0 538 Steam 62021 A 03/03 62021 B 08/05 62021 C 01/09

Page 5 of 7
History of R+C Piping Classes
Material ASME Ca Em Ball Service Apr 1966 Jul 1970 Feb 1974 May 1979 Sep 1983 Feb 1986 Oct 1989 Oct 1992 Dec 1994 Dec 1996 Jan 1999 Jan 2000 Mar 2003 Aug 2005 Jan 2009 = replaced by
rating cl valveSour PWHT T - T+ Special PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev = not replaced

D Alloy steel 5Cr-0.5Mo 600 1 450 203 04/66 6203 07/70 6203 02/74 6203 05/79 6203 07/83 6203 07/84 6203 10/89 62030 O 10/92 62030 A 12/94 62040
Alloy steel 5Cr-0.5Mo 600 1 B PWHT -20 450 62040 O 12/94 62040 A 12/96 62040 B 12/98 62040 C 01/00 62040 D 03/03 62040 E 08/05 62040 F 01/09
Alloy steel 9Cr-1Mo 600 1 B PWHT -20 538 62090 O 03/03 62090 A 08/05 62090 B 01/09
Alloy steel 1.25Cr-0.5Mo 600 1 B PWHT -20 400 H2 6211 10/89 62110 O 10/92 62110 O 1092 62110 A 12/96 62110 B 12/98 62110 C 01/00 62110 D 03/03 62110 E 08/05 62110 F 01/09
Alloy steel 1.25Cr-0.5Mo 600 1 B PWHT -20 500 H2 62120 O 12/94 62120 A 12/96 62120 B 12/98 62120 C 01/00 62120 D 03/03 62120 E 08/05 62120 F 01/09
Alloy steel 1.25Cr-0.5Mo 600 1 B PWHT -20 550 H2 62121 A 03/03 62121 B 08/05 62121 C 01/09
D Stainless steel AISI 321/347 600 0 6301 07/70 6301 02/74 6301 05/79 6301 07/83 6301 07/84 6301 10/89 63010 O 10/92 63010 A 12/94 63011
D Stainless steel AISI 321/347 600 0 0 400 63011 O 12/94 63011 A 12/96 63011 B 12/98 63011 C 01/00 63011 D 03/03 63012
Stainless steel AISI 321/347 600 0 B -20 400 63012 O 08/05 63012 A 01/09
Stainl steel AISI 321/347 [A] 600 0 A -20 400 Seal Gas 63013 O 01/09
Stainless steel AISI 321/347 600 0 B -20 400 63015 O 08/05 63015 A 01/09
D Stainless steel AISI 316 600 0 302 04/66 6302 07/70 6302 02/74 6302 05/79 6302 07/83 6302 07/84 6302 10/89 63020 O 10/92 63020 A 12/94 63021
Stainless steel AISI 316 600 0 B -20 400 63021 O 12/94 63021 A 12/96 63021 B 12/98 63021 C 01/00 63021 D 03/03 63021 E 08/05 63021 F 01/09
Stainl steel AISI 304 LT 600 0 B -200 200 H2 63025 O 01/09
D Stainl steel AISI 304 600 0 0 450 6305 07/70 6305 02/74 6305 05/79 6305 07/83 6305 07/84 6305 10/89 63050 O 10/92 63050 A 12/94 63050 B 12/96 63050 C 12/98 63050 D 01/00 63050 E 03/03 63052
Stainl steel AISI 304 600 0 B -20 450 63052 O 08/05 63052 A 01/09
Stainl steel AISI 304 LT[A] 600 0 B -20 538 H2 63055 O 12/94 63055 A 12/96 63055 B 12/98 63055 C 01/00 63055 D 03/03 63055 E 08/05 63055 F 01/09
Stainless steel AISI 316 600 0 B -20 400 H2 63060 O 08/05 63060 A 01/09
Stainl steel AISI 304 600 0 B -20 400 63084 O 01/09
Stainl steel AISI 304 600 0 B -20 400 63086 O 01/09
D Stainless steel AISI 304 600 0 B -200 150 63090 O 12/94 63090 A 12/96 63090 B 12/98 63090 C 01/00 63090 D 03/03 63095
Stainless steel AISI 304 600 0 B -200 150 63095 O 08/05 63095 A 01/09
Stainl steel AISI 304 LT[A] 600 0 A -200 200 63096 O 01/09
Stainless steel AISI 321/347 600 0 A -20 100 Oxygen 63200 O 08/05 63200 A 01/09
D Stainless steel AISI 316 Nb 600 0 6321 02/74 6321 05/79 6321 07/83 6321 07/84 -
Stainless steel AISI 321/347 600 0 A -20 300 Oxygen 63210 O 08/05 63210 A 01/09
D Stainless steel AISI 304 600 0 6324 05/79 6324 07/83 6324 07/84 -
D Stainless steel AISI 304H 600 0 750 6325 05/79 6325 07/83 6325 07/84 6325 10/89 63250 O 10/92 -
D Ni-Cu alloy Hastelloy B2 600 0 6604 07/70 6604 02/74 6604 05/79 6604 07/83 6604 07/84 -
D Ni-Cr-Fe alloy Inconel 600 600 0 6606 07/70 6606 02/74 6606 05/79 6606 07/83 6606 07/84 -
D Carbon steel 900 1 101 04/66 9101 07/70 9101 02/74 9101 05/79 9101 07/83 9101 07/84 9101 10/89 91010 O 10/92 91010 A 12/94 91011
Carbon steel 900 1 B 0 400 91011 O 12/94 91011 A 12/96 91011 B 12/98 91011 C 01/00 91011 D 03/03 91011 E 08/05 91011 F 01/09
Carbon steel 900 1 B -20 400 91011-20 O 08/05 91011-20 A 01/09
Carbon steel 900 1 B Mod PWHT 0 400 91013 O 08/05 91013 A 01/09
Carbon steel 900 1 B Mod PWHT -20 400 91013-20 O 08/05 91013-20 A 01/09
Carbon steel 900 1 B High 0 400 91015 O 12/94 91015 A 12/96 91015 B 12/98 91015 C 01/00 91015 D 03/03 91015 E 08/05 91015 F 01/09
Carbon steel F-Gr 900 1 B High -20 340 91015-KS O 08/05 91015-KS A 01/09
Carbon steel 900 3 B 0 400 91031 O 12/96 91031 A 12/98 91031 B 01/00 91031 C 03/03 91031 D 08/05 91031 E 01/09
Carbon steel F-Gr 900 3 B -20 340 91031-KS O 08/05 91031-KS A 01/09
Carbon steel 900 1 B Mod 0 400 91041 O 12/96 91041 A 12/98 91041 B 01/00 91041 C 03/03 91041 D 08/05 91041 E 01/09
Carbon steel 900 1 B Mod -20 400 91041-20 O 08/05 91041-20 A 01/09
Carbon steel 900 3 B Mod 0 400 91042 O 12/96 91042 A 12/98 91042 B 01/00 91042 C 03/03 91042 D 08/05 91042 E 01/09
Carbon steel 900 3 B Mod -20 400 91042-20 O 08/05 91042-20 A 01/09
D Carbon steel 900 3 9105 02/74 9105 05/79 9105 07/83 9105 02/86 9105 10/89 91050 O 10/92 91050 A 12/94 91031
D Carbon steel 900 3 91051 O 12/94 91031
Carbon steel 900 3 B High 0 400 H2 91055 O 12/94 91055 A 12/96 91055 B 12/98 91055 C 01/00 91055 D 03/03 91055 E 08/05 91055 F 01/09
Carbon steel 900 3 B High -20 400 H2 91055-20 O 08/05 91055-20 A 01/09
D Carbon steel 900 1 106 04/66 9106 07/70 9106 02/74 9106 05/79 9106 07/83 9106 07/84 9106 10/89 91060 O 10/92 91060 A 12/94 91011
D Carbon steel 900 1 9107 10/89 91070 O 10/92 91070 A 12/94 91071
Carbon steel 900 1 B 0 400 H2 91071 O 12/94 91071 A 12/96 91071 B 12/98 91071 C 01/00 91071 D 03/03 91071 E 08/05 91071 F 01/09
Carbon steel 900 1 B -20 340 H2 91071-KS O 08/05 91071-KS A 01/09
Carbon steel 900 1 B 0 400 H2 91076 O 03/03 91076 A 08/05 91076 B 01/09
Carbon steel 900 1 B -20 340 H2 91076-KS O 08/05 91076-KS A 01/09
Carbon steel LT 900 1 B High -50 340 H2 91176 O 08/05 91176 A 01/09
D Carbon steel 900 1 -50 91170 O 10/92 91170 A 12/94 91172
D Carbon steel 900 1 -50 91172 O 12/94 91172 A 12/96 91172 B 12/98 91172 C 01/00 91180
Carbon steel 900 1 B -50 340 91180 O 03/03 91180 A 08/05 91180 B 01/09
D Carbon steel 900 1 Steam 9126 02/74 9126 05/79 9126 07/83 9126 02/86 9126 10/89 91260 O 10/92 91260 A 12/94 91261
Carbon steel 900 1 B 0 400 Steam 91261 O 12/94 91261 A 12/96 91261 B 12/98 91261 C 01/00 91261 D 03/03 91261 E 08/05 91261 F 01/09
Carbon steel 900 3 B Mod PWHT 0 400 91374 O 08/05 91374 A 01/09
Carbon steel F-Gr 900 3 B Mod PWHT -20 340 91374-KS O 08/05 91374-KS A 01/09
Carbon steel LT 900 3 B Mod -50 340 91380 O 08/05 91380 A 01/09
D Alloy steel 1Cr-0.5Mo 900 ? 201 04/66 -
D Alloy steel 1.25Cr-0.5Mo 900 1 538 201 04/66 9201 07/70 9201 02/74 -
Alloy steel 1.25Cr-0.5Mo 900 1 B -20 450 9201 05/79 9201 07/83 9201 07/84 9201 10/89 92010 O 10/92 92010 A 12/94 92010 B 12/96 92010 C 12/98 92010 D 01/00 92010 E 03/03 92010 F 08/05 92010 G 01/09
Alloy steel 1.25Cr-0.5Mo 900 1 B -20 550 92011 O 03/03 92011 A 08/05 92011 B 01/09
D Alloy steel 1Cr-0.5Mo 900 ? 202 04/66 -
Alloy steel 1.25Cr-0.5Mo 900 1 B 0 450 Steam 9202 07/70 9202 02/74 9202 05/79 9202 07/83 9202 02/86 9202 10/89 92020 O 10/92 92020 A 12/94 92020 B 12/96 92020 C 12/98 92020 D 01/00 92020 E 03/03 92020 F 08/05
92020 G 01/09
Alloy steel 1.25Cr-0.5Mo 900 1 B 0 538 Steam 92021 A 03/03 92021 B 08/05
92021 C 01/09
Alloy steel 5Cr-0.5Mo 900 1 B -20 450 92040 A 03/03 92040 B 08/05
92040 C 01/09
Alloy steel 1.25Cr-0.5Mo 900 1 B -20 550 92090 O 03/03 92090 A 08/05
92090 B 01/09
Alloy steel 1.25Cr-0.5Mo 900 1 B -20 400 H2 9211 10/89 92110 O 10/92 92110 A 12/94 92110 B 12/96 92110 C 12/98 92110 D 01/00 92110 E 03/03 92110 F 08/05
92110 G 01/09
Alloy steel 1.25Cr-0.5Mo 900 1 B -20 500 H2 92120 O 12/94 92120 A 12/96 92120 B 12/98 92120 C 01/00 92120 D 03/03 92120 E 08/05
92120 F 01/09
Alloy steel 1.25Cr-0.5Mo 900 1 B -20 550 H2 92121 O 03/03 92121 A 08/05
92121 B 01/09
Stainless steel AISI 321/347 900 0 B -20 400 93012 O 08/05
93012 A 01/09
Stainl steel AISI 321/347 [A] 900 0 A -20 400 Seal Gas 93013 O 01/09
Stainless steel AISI 321/347 900 0 B -20 400 93015 O 08/05 93015 A 01/09
Stainl steel AISI 347/321[A] 900 0 A -20 450 H2 93017 O 01/09
Stainl steel AISI 347/321 900 0 B -20 450 H2 93018 O 01/09
Stainless steel AISI 316 900 0 B -20 400 93021 O 12/94 93021 A 12/96 93021 B 12/98 93021 C 01/00 93021 D 03/03 93021 E 08/05 93021 F 01/09
D Stainless steel AISI 321/347 900 0 0 450 9305 07/70 9305 02/74 9305 05/79 9305 07/83 9305 07/84 9305 10/89 93050 O 10/92 93050 A 12/94 93050 B 12/96 93050 C 12/98 93050 D 01/00 93050 E 03/03 93052
Stainless steel AISI 321/347 900 0 B -20 450 93052 O 08/05 93052 A 01/09
Stainless steel AISI 321 Stab HT 900 0 B -20 538 93055 O 12/94 93055 A 12/96 93055 B 12/98 93055 C 01/00 93055 D 03/03 93055 E 08/05 93055 F 01/09
Stainl steel AISI 304 900 0 B -20 400 93086 O 01/09
Stainless steel AISI 304 900 0 B -200 200 93095 O 08/05 93095 A 01/09
D Stainless steel AISI 316 Nb 900 0 9321 07/70 9321 02/74 9321 05/79 9321 07/83 9321 07/84 -
D Stainless steel AISI 304 900 0 9324 05/79 9324 07/83 9324 07/84 -
D Stainless steel AISI 304H 900 0 93250 O 10/92 -
D Ni-Cu alloy Monel 400 900 0 Oxygen 96100 O 12/94 -
D Ni-Cu alloy Monel 400 900 0 Oxygen 96110 O 12/94 -
D Carbon steel 1500 1 15101 07/70 15101 02/74 15101 05/79 15101 07/83 15101 02/86 15101 10/89 151010 O 10/92 151010 A 12/94 151011

Page 6 of 7
History of R+C Piping Classes
Material ASME Ca Em Ball Service Apr 1966 Jul 1970 Feb 1974 May 1979 Sep 1983 Feb 1986 Oct 1989 Oct 1992 Dec 1994 Dec 1996 Jan 1999 Jan 2000 Mar 2003 Aug 2005 Jan 2009 = replaced by
rating cl valveSour PWHT T - T+ Special PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev. PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev PC no Rev = not replaced

Carbon steel 1500 1 B 0 400 151011 O 12/96 151011 A 12/98 151011 B 01/00 151011 C 03/03 151011 E 08/05 151011 F 01/09
Carbon steel 1500 1 B -20 400 151011-20 O 08/05 151011-20 A 01/09
Carbon steel 1500 1 B High 0 400 151015 O 12/94 151015 A 12/96 151015 A 12/96 151015 B 01/00 151015 C 03/03 151015 D 08/05 151015 E 01/09
Carbon steel F-Gr 1500 1 B High -20 340 151015-KS O 08/05 151015-KS A 01/09
Carbon steel 1500 3 B 0 400 151031 O 12/96 151031 A 12/98 151031 B 01/00 151031 C 03/03 151031 D 08/05 151031 E 01/09
Carbon steel F-Gr 1500 3 B -20 340 151031-KS O 08/05 151031-KS A 01/09
Carbon steel 1500 1 B Mod 0 400 151041 O 12/96 151041 O 12/96 151041 A 01/00 151041 B 03/03 151041 C 08/05 151041 D 01/09
Carbon steel 1500 1 B Mod -20 400 151041-20 O 08/05 151041-20 A 01/09
Carbon steel 1500 3 B Mod 0 400 151042 O 12/96 151042 O 12/96 151042 A 01/00 151042 B 03/03 151042 C 08/05 151042 D 01/09
Carbon steel 1500 3 B Mod -20 400 151042-20 O 08/05 151042-20 A 01/09
D Carbon steel 1500 3 15105 07/70 15105 02/74 15105 05/79 15105 07/83 15105 02/86 15105 10/89 151050 O 10/92 151050 A 12/94 151031
Carbon steel 1500 3 B High 0 400 151055 O 12/94 151055 A 12/96 151055 A 12/96 151055 B 01/00 151055 C 03/03 151055 D 08/05 151055 E 01/09
Carbon steel 1500 3 B High -20 400 151055-20 O 08/05 151055-20 A 01/09
D Carbon steel 1500 1 15106 07/70 15106 02/74 15106 05/79 15106 07/83 15106 02/86 15106 10/89 151060 O 10/92 151060 A 12/94 151011
D Carbon steel 1500 1 15107 10/89 151070 O 10/92 151070 A 12/94 151071
Carbon steel 1500 1 B Mod 0 400 H2 151071 O 12/94 151071 A 12/96 151071 A 12/96 151071 B 01/00 151071 C 03/03 151071 D 08/05 151071 E 01/09
Carbon steel F-Gr 1500 1 B Mod -20 340 H2 151071-KS O 08/05 151071-KS A 01/09
D Carbon steel 1500 1 High 151075 O 12/94 151071
Carbon steel 1500 3 B Mod 0 400 H2 151076 O 12/94 151076 A 12/96 151076 A 12/96 151076 B 01/00 151076 C 03/03 151076 D 08/05 151076 E 01/09
Carbon steel F-Gr 1500 3 B Mod -20 340 H2 151076-KS O 08/05 151076-KS A 01/09
D Carbon steel 1500 1 Steam 15126 07/70 15126 02/74 15126 05/79 15126 07/83 15126 02/86 15126 10/89 151260 O 10/92 151260 A 12/94 151260
Carbon steel 1500 1 B 0 400 Steam 151261 O 12/94 151261 A 12/96 151261 B 12/98 151261 C 01/00 151261 D 03/03 151261 E 08/05 151261 F 01/09
Carbon steel 1500 1 B Mod PWHT 0 400 151374 O 08/05 151374 A 01/09
Carbon steel F-Gr 1500 1 B Mod PWHT -20 340 151374-KS O 08/05 151374-KS A 01/09
D Carbon steel 1500 1 15138 07/70 15138 02/74 -
D Alloy steel 1Cr-0.5Mo 1500 ? 202 04/66 -
Alloy steel 1.25Cr-0.5Mo 1500 1 B PWHT -20 450 152010 O 08/05 152010 A 01/09
Alloy steel 1.25Cr-0.5Mo 1500 1 B 0 450 Steam 15202 07/70 15202 02/74 15202 05/79 15202 07/83 15202 07/84 15202 10/89 152020 O 10/92 152020 A 12/94 152020 B 12/96 152020 C 12/98 152020 D 01/00 152020 E 03/03 152020 F 08/05 152020 G 01/09
Alloy steel 1.25Cr-0.5Mo 1500 1 B 0 538 Steam 152021 O 03/03 152021 A 08/05 152021 B 01/09
Alloy steel 9Cr-1Mo 1500 1 B -20 550 152090 O 08/05 152090 A 01/09
Alloy steel 1.25Cr-0.5Mo 1500 1 B -20 500 H2 152120 O 08/05 152120 A 01/09
Stainless steel AISI 316 1500 0 -20 400 153021 O 08/05 153021 A 01/09
D Stainless steel AISI 321/347 1500 0 0 450 15305 07/70 15305 02/74 15305 05/79 15305 07/83 15305 07/84 15305 10/89 153050 O 10/92 153050 A 12/94 153050 B 12/96 153050 C 12/98 153050 D 01/00 153050 D 03/03 153052
Stainless steel AISI 321/347 1500 0 B -20 450 153052 O 08/05 153052 A 01/09
Stainless steel AISI 321 stab HT 1500 0 B -20 538 153055 O 08/05 153055 A 01/09
Stainl steel AISI 304 1500 0 B -20 400 153086 O 01/09
D Stainless steel AISI 316 Nb 1500 0 15321 07/70 15321 02/74 15321 05/79 15321 07/83 15321 02/86 -
Carbon steel 2500 1 0 400 251011 O 12/94 251011 A 12/96 251011 B 12/98 251011 C 01/00 251011 D 03/03 251011 E 08/05 251011 F 01/09
Carbon steel 2500 1 -20 400 251011-20 O 08/05 251011-20 A 01/09
Carbon steel 2500 3 0 400 251031 O 12/96 251031 A 12/98 251031 B 01/00 251031 C 03/03 251031 D 08/05 251031 E 01/09
Carbon steel F-Gr 2500 3 -20 340 251031-KS O 08/05 251031-KS A 01/09
D Carbon steel 2500 3 251051 O 12/94 251031
Carbon steel 2500 3 Mod 0 400 H2 251076 O 12/94 251076 A 12/96 251076 A 12/96 251076 B 01/00 251076 C 03/03 251076 D 08/05 251076 E 01/09
Carbon steel F-Gr 2500 3 Mod -20 400 H2 251076-KS O 08/05 251076-KS A 01/09
D Alloy steel 1.25Cr-0.5Mo 2500 1 538 Steam 25202 07/70 25202 02/74 -
Alloy steel 2.25Cr-1.0Mo 2500 1 PWHT 0 538 Steam 252050 O 12/94 252050 A 12/96 252050 A 12/96 252050 B 01/00 252050 C 03/03 252050 D 08/05 252050 E 01/09
D Alloy steel 2.25Cr-1.0Mo 2500 1 537 25206 07/70 25206 02/74 -
Alloy steel 1.25Cr-0.5Mo 2500 1 PWHT -20 500 H2 252120 O 08/05 252120 A 01/09
Stainless steel AISI 316 2500 0 -20 400 253021 O 12/94 253021 A 12/96 253021 A 12/96 253021 B 01/00 253021 C 03/03 253021 D 08/05 253021 E 01/09
Stainless steel AISI 321 Stab HT 2500 0 -20 538 H2 253055 O 12/94 253055 A 12/96 253055 B 12/98 253055 C 01/00 253055 D 03/03 253055 E 08/05 253055 F 01/09
Stainl steel AISI 304 2500 0 B -20 400 253086 O 01/09
D Stainless steel AISI 316 Nb 2500 0 25321 07/70 25321 02/74 25321 05/79 25321 07/83 25321 02/86 -
Total number of piping classes 57 130 128 142 128 142 105 112 224 143 148 145 165 322 324

Page 7 of 7

Petronastechnicalstandards: Pipe Supports
No ratings yet
Petronastechnicalstandards: Pipe Supports
41 pages
PTS 31.38.01.15a - Piping Classes - Exploration and Production PDF
91% (11)
PTS 31.38.01.15a - Piping Classes - Exploration and Production PDF
43 pages
30401030
No ratings yet
30401030
12 pages
Aug 2011
100% (2)
Aug 2011
10 pages
00002010
No ratings yet
00002010
7 pages
Petronas Technical Standards
No ratings yet
Petronas Technical Standards
9 pages
Petronas Technical Standards: Requisition (Binder)
100% (3)
Petronas Technical Standards: Requisition (Binder)
425 pages
ExxonMobil Upstream Piping Design GP
No ratings yet
ExxonMobil Upstream Piping Design GP
88 pages
PDF
100% (1)
PDF
18 pages
Onshore Pipeline Construction Standards
100% (1)
Onshore Pipeline Construction Standards
59 pages
GP-03!12!01 Valve Selection
100% (1)
GP-03!12!01 Valve Selection
11 pages
Gp031202 - Com Valve Selection (Version 1.3.0 FEB 2019)
No ratings yet
Gp031202 - Com Valve Selection (Version 1.3.0 FEB 2019)
23 pages
P&ID Symbols for Pressure Safety Valves
100% (1)
P&ID Symbols for Pressure Safety Valves
11 pages
Petronas Technical Standards - Piping Classes - Basis of Design - PTS 12.31
100% (1)
Petronas Technical Standards - Piping Classes - Basis of Design - PTS 12.31
23 pages
Saes-L-108 (2016)
No ratings yet
Saes-L-108 (2016)
29 pages
Petronas Technical Standards: Specification For Pipeline Valves (Amendments / Supplements To API 6D & API 6DSS)
100% (1)
Petronas Technical Standards: Specification For Pipeline Valves (Amendments / Supplements To API 6D & API 6DSS)
29 pages
Tosp P038 Exe Dec 6335 Pip Mri 0019 - R0
100% (2)
Tosp P038 Exe Dec 6335 Pip Mri 0019 - R0
390 pages
BP Group Engineering Standards Update
100% (2)
BP Group Engineering Standards Update
22 pages
SAES-L-132: Piping Material Selection Guide
100% (1)
SAES-L-132: Piping Material Selection Guide
6 pages
Technical Documentation for Project Development
100% (1)
Technical Documentation for Project Development
24 pages
RP 32-6 Inspection and Testing of In-Service Instrumentation
100% (1)
RP 32-6 Inspection and Testing of In-Service Instrumentation
29 pages
Petronas Technical Standards: Pipelines Pre-Commissioning
100% (4)
Petronas Technical Standards: Pipelines Pre-Commissioning
40 pages
Dual Plate Check Valve Specs RG6-S-00-1360-231
No ratings yet
Dual Plate Check Valve Specs RG6-S-00-1360-231
12 pages
Gs143-1 Pig Launcher and Reciever
100% (3)
Gs143-1 Pig Launcher and Reciever
14 pages
PDO Materials & Corrosion Control Spec
100% (1)
PDO Materials & Corrosion Control Spec
21 pages
Lokring Fitting Installation Guide
No ratings yet
Lokring Fitting Installation Guide
7 pages
GP-03!06!01 Piping For Instruments
100% (3)
GP-03!06!01 Piping For Instruments
18 pages
Petronas Technical Standards: Float Over Engineering Design and Installation
No ratings yet
Petronas Technical Standards: Float Over Engineering Design and Installation
32 pages
Gis 22-201
100% (3)
Gis 22-201
78 pages
Piping Classes Overview and Specifications
100% (1)
Piping Classes Overview and Specifications
15 pages
Fiel Application of Bonded TApe Coatings For External Repair, Rehabilitation and Weld Joints On Buried Metal Pipeline
100% (1)
Fiel Application of Bonded TApe Coatings For External Repair, Rehabilitation and Weld Joints On Buried Metal Pipeline
28 pages
CLASS 11440: DEP 31.38.01.15-Gen Class 11440, Rev. L Page 1 of 15
100% (1)
CLASS 11440: DEP 31.38.01.15-Gen Class 11440, Rev. L Page 1 of 15
15 pages
Group Practice GP 34-00 Machinery: Use and Interpretation of This Document
83% (6)
Group Practice GP 34-00 Machinery: Use and Interpretation of This Document
40 pages
Petronas Technical Standards: Piping Classes - Basis of Design
80% (5)
Petronas Technical Standards: Piping Classes - Basis of Design
23 pages
Petronas Technical Standards: Glass-Fibre Reinforced Plastic Piping System
100% (3)
Petronas Technical Standards: Glass-Fibre Reinforced Plastic Piping System
26 pages
PMRC Mar Va 115
No ratings yet
PMRC Mar Va 115
11 pages
Valve Criticality Analysis Guidelines
100% (2)
Valve Criticality Analysis Guidelines
38 pages
34242631
No ratings yet
34242631
12 pages
Insulation Gasket Kits Specification
No ratings yet
Insulation Gasket Kits Specification
10 pages
34110010
100% (1)
34110010
95 pages
GP 44-70 - Overpressure Protection Systems
100% (4)
GP 44-70 - Overpressure Protection Systems
69 pages
Stanlow and Shell Haven Piping Classes
No ratings yet
Stanlow and Shell Haven Piping Classes
17 pages
PTS 11.32.01 CP System For Onshore Buried and Shore Approach Pipeline
No ratings yet
PTS 11.32.01 CP System For Onshore Buried and Shore Approach Pipeline
43 pages
PTS 12.01.01
100% (2)
PTS 12.01.01
16 pages
Iso 25457-2023
100% (2)
Iso 25457-2023
8 pages
PTS 120201
100% (2)
PTS 120201
56 pages
ASME B31.4 Pipeline Design Overview
100% (1)
ASME B31.4 Pipeline Design Overview
16 pages
PTG Bfji
No ratings yet
PTG Bfji
95 pages
Insulation Thickness Tables for Pipes
No ratings yet
Insulation Thickness Tables for Pipes
9 pages
BVS Design and Operation Specification
100% (2)
BVS Design and Operation Specification
18 pages
31244931 (1)
No ratings yet
31244931 (1)
12 pages
Petronas Technical Standards
No ratings yet
Petronas Technical Standards
20 pages
Petronas Technical Standards: Filters For Removing Particles From Hydroprocesser Feeds - Type Selection and Design Rules
100% (1)
Petronas Technical Standards: Filters For Removing Particles From Hydroprocesser Feeds - Type Selection and Design Rules
46 pages
Petronas Technical Standards: Measurement of Viscous Properties of Completion Fluids (Endorsement of Iso 13503-1)
No ratings yet
Petronas Technical Standards: Measurement of Viscous Properties of Completion Fluids (Endorsement of Iso 13503-1)
7 pages
Dec 07
No ratings yet
Dec 07
44 pages
Dec 09
No ratings yet
Dec 09
24 pages
PTS 20.084-1991 Hazardous Area Classification
No ratings yet
PTS 20.084-1991 Hazardous Area Classification
11 pages
Dec 07
100% (1)
Dec 07
55 pages
Guide to Chemical Warehousing Standards
No ratings yet
Guide to Chemical Warehousing Standards
45 pages
600501
100% (2)
600501
78 pages
EIA Checklist for Naresco Workshop
No ratings yet
EIA Checklist for Naresco Workshop
3 pages
Fast Guide To DTV
No ratings yet
Fast Guide To DTV
6 pages
Comprehensive IT Solutions for Telecoms
No ratings yet
Comprehensive IT Solutions for Telecoms
76 pages
Manual Ninja Flame
No ratings yet
Manual Ninja Flame
48 pages
H&N ECU Pinout and Connector Guide
No ratings yet
H&N ECU Pinout and Connector Guide
2 pages
Securing Networks with Cisco ASA
No ratings yet
Securing Networks with Cisco ASA
45 pages
DASCO ESP Tooling Product Catalogue
No ratings yet
DASCO ESP Tooling Product Catalogue
12 pages
IRCTC Booking Confirmation for Keerthi J
No ratings yet
IRCTC Booking Confirmation for Keerthi J
1 page
CCTV Accessories Price List 2019
No ratings yet
CCTV Accessories Price List 2019
1 page
Guide to Writing Computer Books
No ratings yet
Guide to Writing Computer Books
8 pages
Neural Networks for Solving PDEs
No ratings yet
Neural Networks for Solving PDEs
49 pages
Daybest Drone Solutions for Farmers
No ratings yet
Daybest Drone Solutions for Farmers
4 pages
Entry-Level Data Analyst Resume
No ratings yet
Entry-Level Data Analyst Resume
1 page
Doctoral Degree Eligibility Form
No ratings yet
Doctoral Degree Eligibility Form
1 page
Image Feature Extraction Techniques
No ratings yet
Image Feature Extraction Techniques
63 pages
TOSVERT VF-S15 Series Option Unit Function Manual CCL003Z: Downloaded From Manuals Search Engine
No ratings yet
TOSVERT VF-S15 Series Option Unit Function Manual CCL003Z: Downloaded From Manuals Search Engine
51 pages
Zeebra
No ratings yet
Zeebra
10 pages
Addressing Infoglut with Intelligent Systems
No ratings yet
Addressing Infoglut with Intelligent Systems
15 pages
A10 4.1.1-P11 DCFW
100% (1)
A10 4.1.1-P11 DCFW
142 pages
Wastewater Treatment Tank Design Specs
No ratings yet
Wastewater Treatment Tank Design Specs
1 page
BTCOC702 New Cloud Computing
No ratings yet
BTCOC702 New Cloud Computing
1 page
Essential Network Commands Guide
No ratings yet
Essential Network Commands Guide
65 pages
Ó Grande Deus Sheet Music for Strings
No ratings yet
Ó Grande Deus Sheet Music for Strings
7 pages
V2500 LPT Stage 6 Disk Replacement Notice
No ratings yet
V2500 LPT Stage 6 Disk Replacement Notice
11 pages
Summer Internship SOP for B.Com Students
No ratings yet
Summer Internship SOP for B.Com Students
2 pages
Partial Discharge Calibration Guide
No ratings yet
Partial Discharge Calibration Guide
3 pages
Atlas Copco GA VSD+ Compressor Diagram
No ratings yet
Atlas Copco GA VSD+ Compressor Diagram
1 page
XT1C 160 TMD Circuit Breaker Details
No ratings yet
XT1C 160 TMD Circuit Breaker Details
4 pages
Capacity Planning Essentials
No ratings yet
Capacity Planning Essentials
4 pages
Debugging Alteryx Workflows Guide
No ratings yet
Debugging Alteryx Workflows Guide
3 pages

Petronas Technical Standards: Piping Classes - Refining and Chemicals

Uploaded by

Petronas Technical Standards: Piping Classes - Refining and Chemicals

Uploaded by

PETRONAS TECHNICAL STANDARDS

DESIGN AND ENGINEERING PRACTICE

PIPING CLASSES – REFINING AND CHEMICALS

2011 PETROLIAM NASIONAL BERHAD (PETRONAS)

The right to use PTS rests with three categories of users:

1) PETRONAS and its affiliates.

1.2 DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS

1.3.1 General definitions

1.3.2 Specific definitions

1.4 CROSS REFERENCES

1.5 SUMMARY OF MAIN CHANGES

1.5.2 Design code update

1.5.3 New piping classes

1.5.6 Branch table

2. PIPING CLASSES – SERVICES AND MATERIALS SELECTION INDEX

This index is presented as a spreadsheet on Standard Form PTS [Link].

DEP 31380184 Gen -

Piping class Service MESC number range

11001 Acetone 770025 003.1 to 012.1

4. LEVEL DISPLACER CHAMBERS

Piping class Level displacer chamber

Alloy steel 0.5Mo ASTM A 335 grade P1 768060 702.1 to 738.1

Carbon steel ASTM A 106 grade B 768060 042.1 to 138.1

Carbon steel H-Sour ASTM A 106 grade B 768060 402.1 to 498.1

Carbon steel PWHT ASTM A 106 grade B 768059 042.1 to 118.1

Carbon steel LT ASTM A 333 grade 6 768060 242.1 to 338.1

Carbon steel LT H-Sour ASTM A 333 grade 6 768060 582.1 to 678.1

Carbon steel LT PWHT ASTM A 333 grade 6 768059 242.1 to 298.1

Stainless steel 304 AISI 304 768061 042.1 to 118.1

Stainless steel 316 AISI 316 768061 442.1 to 538.1

Stainless steel 316L AISI 316L 768062 002.1 to 038.1

Stainless steel 321/347 AISI 321/347 768061 842.1 to 938.1

In this PTS, reference is made to the following publications:

APPENDIX A DETAILED CHANGES PER PIPING CLASS

APPENDIX B HISTORY OF DEP PIPING CLASSES INDEX

PTS [Link] 7012 7012 10.0 1 25 900 GRVE Bisphenol A - - - 0 80 - soft

PTS [Link] 7102 7102 16.0 1 25 600 GRVE Bisphenol A - - - 0 80 - soft

PTS [Link] 7102 7102 16.0 1 25 600 GRVE Bisphenol A - - - 0 80 - soft

PTS [Link] 7130 7130 10.0 1 100 1200 GRVE Bisphenol A - - - -5 80 -

PTS [Link] 7320 7320 10.0 1 25 1200 GRUP Isophthalic - - - -5 60 -

PTS [Link] 7320 7320 10.0 1 25 1200 GRUP Isophthalic - - - -5 60 -

PTS [Link] 7320 7320 10.0 1 25 1200 GRUP Isophthalic - - - -5 60 -

PTS [Link] 1001 1021 Butane gas C4H10 106-97-8 F+ No 0 60

PTS [Link] 1001 1021 Polyols unfinished neutral product - No 0 150

PTS [Link] 1011 1011 Butanol C4H10O 71-36-3 Xi Xn No 0 200

PTS [Link] 1011 1011 Polyols unfinished neutral product - No 0 150

PTS [Link] 1011-20 - No

PTS [Link] 1085 1172 Butane liquid 4 C4H10 106-97-8 F+ No -50 50

PTS [Link] 1261 1261 Steam saturated, superheated - No 0 400

PTS [Link] 2021 2021 Steam superheated - No 400 538

PTS [Link] 3021 3021 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3025 Hydrogen H2 1333-74-0 F+ No -200 200

PTS [Link] 3032 3031 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3081 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3086 Water, demineralised H2O 7732-18-5 No 0 80

PTS [Link] 3092 3091 Ethane 4 C2H6 74-84-0 F+ No -90 150

PTS [Link] 7011 7011 Water, demineralised 10 H2O 7732-18-5 - 0 80

PTS [Link] 7102 7102 Foam, fire fighting concentrated solution 10 - - 0 50

PTS [Link] 7102 7102 Water, fire fighting fresh 10,11 - - 0 50

PTS [Link] 7130 7130 Water, cooling brackish-/seawater 10 - - -5 80

PTS [Link] 7320 7320 Water, cooling brackish-/seawater 10 - - -5 60

PTS [Link] 7320 7320 Water, cooling chlorinated seawater 10 - - -5 60

PTS [Link] 7320 7320 Water, washdown brackish-/seawater 10 - - -5 60

PTS [Link] 1000 1011 Category - M

PTS [Link] 1071 1071 Category - N

PTS [Link] 1085 1172 Category - N

PTS [Link] 3021 3021 Category - D /

PTS [Link] 7102 7102 Category - D /

PTS [Link] 1000 1011 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - - -

PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -

PTS [Link] 1001 1021 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -

PTS [Link] 1085 1172 - A333-6 - - A671-CC65 cl 22 - A420-WPL6 - A420-WPL6W

PTS [Link] 1201 1201 A106-B - 5L-B A672-C65 cl 22 - A234-WPB - A234-WPBW -

PTS [Link] 1210 1210 A106-B - - - - A234-WPB - - -

PTS [Link] 1271 1271 - A333-6 - - - - A420-WPL6 - -

PTS [Link] 2021 2021 A335-P11 - - A691-1.25Cr cl 22 - A234-WP11 - A234-WP11W -