Scribd
Upload
127 views3 pages

Face Milling Tool Selection Guide

The document summarizes the tool selection process for face milling a part made of P1.4.Z.AN material with dimensions of 311mm x 156mm. It describes selecting a Sandvik 345-080Q27-13L face milling cutter with a 80mm diameter and 13mm insert width. The recommended cutting speed is 330m/min, feed per tooth is 0.11mm/rev, and spindle speed is 1313rpm, with a target surface roughness of Ra 1.6μm.

Uploaded by

Juan Diego Zambrano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
127 views3 pages

Face Milling Tool Selection Guide

The document summarizes the tool selection process for face milling a part made of P1.4.Z.AN material with dimensions of 311mm x 156mm. It describes selecting a Sandvik 345-080Q27-13L face milling cutter with a 80mm diameter and 13mm insert width. The recommended cutting speed is 330m/min, feed per tooth is 0.11mm/rev, and spindle speed is 1313rpm, with a target surface roughness of Ra 1.6μm.

Uploaded by

Juan Diego Zambrano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Tool Selection Sheet

Operation I: Top face milling


a) Step 1: Operation and feature geometry
Feature Data
Part Material [Link]
Type of operation Face milling
Condition of operation Roughing
Dimension of face to machine 311mm x 156mm
Initial estimated tool diameter 80 mm
b) Step 2: Tool selection
Feature Data
Tool type Face miller
Catalog Position Sandvik – Rotating tools – face milling tools
Multiple options 345-080Q27-13L; 345-080C6-13M

Check of Parameters

DCON = 27,0 ☑
ISO A ☑
DBC = - ☑
DCX = 94,1 ☑
LF = 50,0 ☑
c) Step 3: Information of the selected tool
Feature Data
Cutter 345 Face milling cutter
Type of application L
DC 80
Code 345-080Q27-13L
d) Step 4: Information of the cutting edges
Feature Data
Type Light Milling
Part material [Link]
First choice to verify 345R-1305M-PM / P4330
Check of Parameters

IC = 13,0 ☑
LE = 8,8 ☑
S = 5,60 ☑
BS = 2,0 ☑
RE = 0,80 ☑

e) Step 5: Parameters of selected tool


Feature Data
Cutting speed 330 [m/min]
Feed per tooth 0,11 [mm/rev]
Speed 1313 [rpm]

f) Step 6: Roughness requirements:


Feature Data
Roughness value Ra 1.6 [µm]
Op. Number Code Insert Code Manufacturer
1 345-080Q27-13M 345R-1305M-PM

[Link]
gb/product-details?c=345-080Q27-
13M&m=5759480

You might also like