ATLANTIC HYDRAULIC OILS
Very High Performance Anti-Wear Hydraulic Oils
PRODUCT DATA
DESCRIPTION
ATLANTIC HYDRAULIC OILS are supreme performance anti-wear hydraulic oils designed to satisfy a wide range
of hydraulic equipment requirements. They were developed to meet the stringent requirements of severe hydrau-
lic systems using high pressure, high output pumps as well as handling the critical requirements of other hydraulic
system components such as close clearance servo-valves and the high accuracy numerically controlled (NC)
machine tools. Formulated with high quality base oils and a super-stabilized additive system that neutralizes the
formation of corrosive materials & designed to work with systems operating under severe conditions where high
levels of antiwear and film strength protection are needed, yet they are formulated to work where non-antiwear
hydraulic oils are generally recommended.
APPLICATIONS
ATLANTIC HYDRAULIC OILS AW are designed to give excellent protection in mobile and stationary hydraulic
vane-, piston-, and gear-type pumps and in high-performance industrial applications as well as in environmentally
sensitive areas. Suitable for use in all kind of hydraulic systems running under the most difficult conditions, such as
in machine tools, mould injection machines, presses and other industrial or mobile equipment. Also used in many
other applications, where a universal high performance anti-wear lubricant is the first choice: low charged gears,
sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.
PROPERTIES
ATLANTIC HYDRAULIC series provide outstanding oxidation resistance allowing extension of oil and filter
change intervals. Their high level of anti-wear properties and excellent film strength characteristics result in
exceptional equipment performance that not only results in fewer breakdowns but helps improve production
capacity. Their controlled demulsibility permits the oils to work well in systems contaminated with small amounts
of water yet readily separate large amounts of water.
PERFORMANCE FEATURES AND BENEFITS
• High protection against wear insuring maximum equipment life. •Excellent hydrolytic stability avoiding filter blocking.
• Superior thermal stability avoiding formation of sludge •Excellent protection against rust and corrosion.
even at high temperature. •Good anti-foam and air release properties by using
• Very good oxidation stability ensuring a long service life of the fluid silicon free components.
• Quality reserve maintains performance features even under severe • Good demulsibility ensuring rapid water separation
service conditions and extended drain intervals • Reduced maintenance and operating costs
• Remarkable filterability even in the presence of water
INDUSTRY SPECIFICATIONS:
International Standards : AFNOR NF E 48-603 HM, ISO 6743/4 HM, DIN 51524 P2 HLP,
CINCINNATI MILACRON P68, P69, P70
Meets or exceeds : VICKERS M-2950S, -I-286, DENISON HF0, HF1, HF2 (T6H20C), HUSKY HS 207
TYPICAL TECHNICAL PROPERTIES
Viscosity Grade, SAE J300 10 22 32 46 68 100 150
Product code 1260HF 12561HF 12562HF 12563HF 12564HF 12565HF 12566HF
Appearance, Visual B&C B&C B&C B&C B&C B&C B&C
Density at 15°C, g/ml, ASTM D4052 0.846 0.866 0.875 0.880 0.884 0.888 0.892
Kinematic Viscosity at 40°C, mm²/s, ASTM D445 10 22 32 46 68 100 150
Kinematic Viscosity at 100°C, mm²/s, ASTM D445 2.68 4.34 5.42 6.79 8.77 11.42 14.79
Viscosity Index, ASTM D2270 100 102 102 100 100 100 97
Flash Point(COC), °C, ASTM D92 170 222 228 232 242 254 268
Pour Point °C, ASTM D97 -33 -30 -27 -27 -21 -18 -18
FZG 4-Square Load Support, DIN 51354, Fail Stage - - 12 12 12 12 12
Copper strip corrosion, 3 hrs @ 100°C, ASTM D130 1B 1B 1B 1B 1B 1B 1B
Rust protection Proc B, ASTM D665 PASS PASS PASS PASS PASS PASS PASS
Note: These characteristics are typical of current production. While future production will conform to Atlantic’s specification, variations in these characteristics may occur.
ATL/PDS/HF/018/0*, 10.08.15, Page 1/1
Packing : 5 | 20 | 25 | 208 L * supersedes all previous versions
Health and Safety: This lubricant, when used in accordance with our recommendations and for the application for which it is intended, does not
constitute any special hazard. A safety data file conforming to the requirements of current EC legislation is available from your local trade consultant. E- 1
