Scribd
Upload
111 views2 pages

OK Weartrode 62 Product Overview

This product data sheet provides information on OK Weartrode 62, a hardfacing electrode for protecting parts subjected to severe abrasion. It deposits a weld metal with high volume of fine carbides in a martensitic matrix. Applications include earth-drilling equipment, hammers, scrapers, knives, and conveyor screws. The electrode has a minimum AC open circuit voltage of 45V and can be used in all positions. It has a carbon content between 2.5-3.5% and contains 5.5-7.0% chromium and 4.5-5.5% vanadium.

Uploaded by

Dieng Messatsu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
111 views2 pages

OK Weartrode 62 Product Overview

This product data sheet provides information on OK Weartrode 62, a hardfacing electrode for protecting parts subjected to severe abrasion. It deposits a weld metal with high volume of fine carbides in a martensitic matrix. Applications include earth-drilling equipment, hammers, scrapers, knives, and conveyor screws. The electrode has a minimum AC open circuit voltage of 45V and can be used in all positions. It has a carbon content between 2.5-3.5% and contains 5.5-7.0% chromium and 4.5-5.5% vanadium.

Uploaded by

Dieng Messatsu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Product Data Sheet OK Weartrode 62

E 'Manual metal-arc welding' Formerly OK 84.84

Prepared by Qualified by Approved by Reg no Cancelling Reg date Page

A-C Thorsson Tero Tolonen Tapio Huhtala EN006243 None 2013-10-29 1 (2)

REASON FOR ISSUE


New product. Changed name from OK 84.84.

GENERAL
A hardfacing electrode depositing a weld metal with a high volume fraction of fine carbides in a martensitic
matrix. It is designed for protection of parts subjected to severe abrasion from rock, sand, cement, etc.
Applications: Earth-drilling equipment. Hammers, scrapers, knives, conveyor screws,etc.

Min AC OCV: 45 Alloy Type: Carbide rich steel


Polarity: AC, DC+- Coating Type: Basic

WELDING POSITIONS

1 2 3 4 5

CLASSIFICATIONS weld metal


Not applicable

CHEMICAL COMPOSITION
All Weld Metal (%)
Min Max
C 2.5 3.5
Si 1.5 2.5
Mn 0.5
P 0.020
S 0.010
Cr 5.5 7.0
V 4.5 5.5
Ti 4.0 5.5

ECONOMICS & CURRENT DATA


Dimension (mm) Current (A)
-
W η N B H T U Welding
-
Ø x Length Min Max Positions
2.5 x 350 70 100 2.3 115 0.63 71 0.5 105 17 1,2,3,4,5
3.2 x 350 100 150 3.8 115 0.60 44 0.7 110 17 1,2,3,4,5
4.0 x 350 115 200 5.9 125 0.64 27 1.0 120 17 1,2
W = Weight (kg / 100 electrodes)
η = Efficiency (g weld metal x 100 / g core wire)
N = Effective value (kg weld metal / kg electrodes)
B = Changes (number of electrodes / kg weld metal)
H = Deposit rate at 90% of max current (kg weld metal / hour arc time)
T = Fusion time at 90% of max current (s / electrode)
U = Arc voltage (V)

OTHER DATA
Welding: Preheating is normally not required. For heavier sections a raised temperature up to 200 °C may be
Product Data Sheet OK Weartrode 62
E 'Manual metal-arc welding' Formerly OK 84.84

Prepared by Qualified by Approved by Reg no Cancelling Reg date Page

A-C Thorsson Tero Tolonen Tapio Huhtala EN006243 None 2013-10-29 2 (2)

OTHER DATA
beneficial. Stringer beads recommended. Use medium arc length. Keep electrode perpendicular to work
piece. Optimum hardness is obtained already in the first layer due to low dilution of underlaying material.

Typical hardness, HRC (As welded on mild steel, no preheat.)


1 layer ........62
2 layers ........62

Machinability: Grinding only.

Redrying: 200 °C, 2h.

You might also like