16E1/T1 Managed Multiplexer
FMUX160
FMUX80
16 or 8x E1/T1 + 4x FE, Managed
Fiber Multiplexer
The FMUX160/FMUX80 is 1U 19” rack mountable, PDH fiber optical Multiplexer that transmits up to 16/8 E1/T1 + 4 x 10/100Base-TX
Fast Ethernet over a single fiber optic link. The FMUX160/FMUX80 chassis in available in three different power configurations; single
AC, single DC, or AC+DC. The AC supplies operate from 90 ~ 240VAC while DC supplies operate from 18~60VDC. On the rear of the
chassis, the BNC model provides 32/16 unbalanced 75 Ohm coaxial connections with BNC connectors while the RJ-45 model provides
10
16/8 balanced 120 Ohm connections over twisted pair wiring with RJ45 connectors. the FMUX160/FMUX80 gives you the fiber cabling
connector ST SC FC, both multi-mode and single-mode are available as well as BiDi which allows bi-directional transmissions using
only a single fiber cable. 1+1 Automatic optical line protection is also supported for the aggregate fiber ports. The standard FMUX160/
FMUX80 configuration may be viewed or set via serial VT-100 terminal connection or SNMP card with web, telnet, and SNMP
management.
16E1/T1 Managed Multiplexer FMUX160 & FMUX80
Features
▪▪ Provides 16/8 E1/T1 G.703 transparent transmission over fiber ▪▪ Forward 1792 byte packets on Ethernet port
▪▪ Provide 4x 10/100 Mbit/s Ethernet Ports (100Mbps aggregate) ▪▪ Supports 1+1 fiber line protection. Less than 50ms
▪▪ Provides one RS232 channel ▪▪ Complete alarm function and can monitor remote device status
▪▪ Loopback test on E1/T1 fiber port ▪▪ Power combination AC220V and DC-48V for redundant options
▪▪ Provides one hotline channel ( order-wire ) ▪▪ Supports RS232 local management ; Supports on-line f/w upgrade
▪▪ Supports full/half duplex, 10M/100M, auto-Negotiation ▪▪ Supports Web, Telnet, SNMP management (optional)
Specifications
Optical Connector ST, SC, FC (Fixed) T1 Interface Standards ITU-T G.703, G.704, AT&T TR-62411, ANSI
Interface Data rate 155.52Mbps T1.403
Less than 10 -11
Bit Error Rate Ports 8/16 ports
Distance MM 2km, SM 15/30/50/80/120km WDM Data Rate 1.544 Mbps ±50 ppm
20/40/60/80km Line Code B8ZS / AMI
Wavelength 1310nm, 1550nm, CWDM 1471nm~1611nm Connector RJ-45 for 100 ohms
Electrical Connector Console : RS232 / SNMP : RJ45 Standards ITU-T G.703, G.823 and G.742, ANSI, AT&T, IEEE 803.2,
Interface Ethernet : RJ45 (4-port) IEEE 802.3u
Certification CE, LVD
Alarm : RS232 / Order wire : RJ11
E1 Interface Standards ITU-T G.703, G.704, G.706, G.732 Indications Power, Alarm, LBK, RD, LCK, RNG, ACO, Port, channel
Ports 8/16 ports Power Input 90 ~ 240VAC, 18~60VDC
Data Rate 2.048 Mbps ± 50 ppm Power
Consumption <25W
Line Code HDB3/AMI
Dimensions 250 x 438 x 43mm (D x W x H)
Connector RJ-45 for 120 ohms BNC for 75 ohms
Weight 3.58kg
Temperature 0 ~ 60°C (Operating), -10 ~ 70°C (Storage)
MTBF 75,000 hrs
Application
Remote 3G BTS connection Application
Local Remote
SmartView
SDH
Order Wire 3G BTS
ADM
FE 16 E1/T1
1+1 Protection FE
FMUX160 FMUX160 16E1/T1
RS232 clear RS232 clear
channel Order Wire channel
-Related Products: FMUX1001/101, FMUX1600, FMUX04E (16x E1/T1 + 4x GbE/FE FOM,4E1/T1 + 3x FE FOM)
Ver. 2019
Aug. 2022
v1.0
[Link] / sales@[Link]
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details. 10-5
16E1/T1 Managed Multiplexer
Ordering Information
Two Fiber model
Model Name Description
FMUX160B-AD-2SC002 16x E1 BNC + 4 x 10/100Base-T Ethernet Fiber Multiplexer, with two MM 2km SC fiber, AC+DC Power
FMUX160R-AD-2SC002 16x E1/T1 RJ45 + 4 x 10/100Base-T Ethernet Fiber Multiplexer, with two MM 2km SC fiber, AC+DC Power
FMUX80B-AD-2SC002 8x E1 BNC + 4 x 10/100Base-T Ethernet Fiber Multiplexer, with two MM 2km SC fiber, AC+DC Power
FMUX80R-AD-2SC002 8x E1/T1 RJ45 + 4 x 10/100Base-T Ethernet Fiber Multiplexer, with two MM 2km SC fiber, AC+DC Power
One Fiber model
Model Name Description
FMUX160B-AD-SC002 16x E1 BNC + 4 x 10/100Base-T Ethernet Fiber Multiplexer, with one MM 2km SC fiber, AC+DC Power
FMUX160R-AD-SC002 16x E1/T1 RJ45 + 4 x 10/100Base-T Ethernet Fiber Multiplexer, with one MM 2km SC fiber, AC+DC Power
FMUX80B-AD-SC002 8x E1 BNC + 4 x 10/100Base-T Ethernet Fiber Multiplexer, with one MM 2km SC fiber, AC+DC Power
FMUX80R-AD-SC002 8x E1/T1 RJ45 + 4 x 10/100Base-T Ethernet Fiber Multiplexer, with one MM 2km SC fiber, AC+DC Power
Optional modules
Model Name Description
FMUX160-SNMP SNMP Card with 10/100Base-TX Ethernet Port
FMUX80-SNMP SNMP Card with 10/100Base-TX Ethernet Port
FMUX-Phone-2 2 Wires Order Wire with RJ9 to RJ11 cable
FMUX-Phone-4 4 Wires Order Wire
Note: SNMP option only required in one unit of paired link
Example:
E1 Fiber
Connector Connector
Type Power Type Type Distance
FMUX 160 B AD 2 SC 002 M P 2 2: 2-Wire
4: 4-Wire
M: SNMP
160: 16E1/T1 B: BNC AD, DC, AC 2: 2x Fiber SC, ST, FC 002(2KM) 20A(WDM 20KM A Type)
80: 8E1/T1 R: RJ45 015(15KM) 20B(WDM 20KM B Type)
030(30KM) 40A(WDM 40KM A Type)
050(50KM) 40B(WDM 40KM B Type)
Ver.
2019Aug. 2022
v1.0
10-6 [Link] / sales@[Link]
Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details.
