0% found this document useful (0 votes)
67 views2 pages

PQ120 Electric Pump Specifications

The document describes the PQ120 Series electric pump. It can pump up to 400 tons and 120 cu. in./min. It has overcurrent protection, starts under reduced voltage, and has internal and external relief valves to limit pressure. It comes prewired with a 3 hp motor and is available in different electrical configurations. Noise levels are below OSHA limits. It provides pressure up to 10,000 psi and has been used to drive piers to lift and stabilize building foundations.

Uploaded by

luis terrones
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
67 views2 pages

PQ120 Electric Pump Specifications

The document describes the PQ120 Series electric pump. It can pump up to 400 tons and 120 cu. in./min. It has overcurrent protection, starts under reduced voltage, and has internal and external relief valves to limit pressure. It comes prewired with a 3 hp motor and is available in different electrical configurations. Noise levels are below OSHA limits. It provides pressure up to 10,000 psi and has been used to drive piers to lift and stabilize building foundations.

Uploaded by

luis terrones
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

ELECTRIC PUMP

PQ120 Series
Up to 400 Ton
120 cu. in./min.
• Start and operate under full load, even with
voltage reduced by 10%.
• Electrical shut-down feature prevents
unintentional restarting of motor following
an electrical service interruption.
• Internal relief valve limits pressure
to 10,000 psi. External relief valve is
adjustable from 1,000 to 10,000 psi.
• Pump prewired at factory with a 3 hp,
460 volt, 60 Hz, 3 Phase motor. Other
PUMPS

electrical configurations are available. See


ordering information on the
following page.
• 24 volt control circuits on units with
remote controls for added
user/operator safety.
• 3 hp (3 phase) motor with thermal overload
protection. Motor starter and heater element
supplied as standard equipment: no hidden
charges! PQ1203
• Metal shroud keeps dirt and moisture out
of motor and electrical components.
• Pumps operate below maximum OSHA noise
limitation.

H J G

E F
B K C

Max. dBa at Amp Draw


Pressure Idle and at Oil Del. (cu. in./min. @) Prod. Wt.
Pump Output 10,000 10,000 100 1,000 5,000 10,000 A B C D E F G H J K w/Oil
No. (psi) rpm (psi) (psi) (psi) (psi) (psi) (psi) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (lbs.)
PQ120 10,000 1,725 73/78 See Chart 730 160 130 120 251/8 141/4 151/2 71/4 121/8 135/16 1411/16 95/16 413/16 1/2–20 164
Series On page 89 UNF

* Measured at a 3 ft. distance, all sides.


** Total weight with oil and 3-way solenoid valve. Subtract 10 lbs. to ob-
tain weight of pump with manual valve.
*** For 2” dia. swivel casters, order (4) No. 10494.

88
PUMPS
PQ1204

10,000 psi PQ1204S

LR19814

PQ- series pump used to drive piers to


lift and stabilize building foundation.

Max. Amp Draw @ Reservoir


For use with Order Valve Valve Valve 10,000 Usable
Cyl. Type Description No. Type No. Function (psi) Motor (cu. in.)
Single-Acting 3 hp pump with 5.7 gal. PQ1203 3-Way 9520* Advance Hold 230V - 10.5 amps 3 hp, 460 Volt 1,250
reservoir and manual valve. Return 460V - 5.3 amps 60 Hz††, 3 Phase
Single-Acting PQ1203, except has solenoid PQ1203S 3-Way 9599† Advance Hold 230V - 10.5 amps 3 hp, 460 Volt 1,250
operated remote valve. Return 460V - 5.3 amps 60 Hz††, 3 Phase
Double-Acting 3 hp pump with 5.7 gal. PQ1204 4-Way 9506* Advance Hold 230V - 10.5 amps 3 hp, 460 Volt 1,250
reservoir and manual valve. Return 460V - 5.3 amps 60 Hz††, 3 Phase
Double-Acting PQ1204, except has solenoid PQ1204S 4-Way 9512† Advance Hold 230V - 10.5 amps 3 hp, 460 Volt 1,250
operated remote valve. Return 460V - 5.3 amps 60 Hz††, 3 Phase

* Manual valve. Pump is equipped with RUN/OFF/PULSE switch for ‡ Some Power Team pumps are available in special configurations not
control of motor. listed in this catalog. For your special requirements please consult your
† Solenoid valve. Pump is equipped with a remote local distributor or the Power Team factory.
control switch with 10 ft. cord.
†† PQ120 series also available in 230V 60 Hz or 220/380V
50 Hz. Please specify when ordering. Example: for 60 Hz
order PQ1204S-230; for 50 Hz. order PQ1204S-50-220 or
PQ1204S-50-380.
PQ120 Series also available in 575V 60 Hz. Consult the factory.

[Link] 89

You might also like