6 5 4 3 2 1
ITEM QTY PART NUMBER DESCRIPTION MATERIAL MASS
2 1 AOC-0143-1 4'' EBOWL VHB. 114/ 102(VHB114102M01) 11,2 kg
1 2 AOC-0105 SOLID END 4" Steel, Mild 0,9 kg
D D
1
6 DRAWING REGISTER
No. A (DEG) PART NUMBER DESCRIPTION NOTE
1 45 AOC-0143-45XL LONG RAD BEND 4'' X 45 DEG X R1000
2
2 90 AOC-0143-90XL1000 LONG RAD BEND 4'' X 90 DEG X R1000
C 2 C
6
R1000
B B
16,5
6 1 A
40
101,6
123,2
ALL SHARP EDGES TO BE REMOVED OVER TITLE:
NOMINAL 0 6 30 120 400 1000 TOTAL WEIGHT
A GMVN APPROVAL /DEBURRED. ALL WELD SPATTER TO BE
REMOVED. SIZE TO 6 30 120 400 1000 2000 LONG RAD BEND 4'' (Kgs):
A
UNLESS OTHERWISE SPECIFIED DIMENSIONS DRAWN HT 27-Jan-18
MACHINED +/- 0.1 0.1 0.2 0.2 0.5 1 PROJECT:
27-Jan-18
Date :....................................
ARE IN MILIMETERS. THE TOLERANCES ON
DIMENSIONS FOR WHICH NO LIMITS ARE GIVE
SHALL BE SHOWN AS BELOW FABRICATED +/- 1 1 2 2 3 4 AOC
JACON CHK'D NT 27-Jan-18 SCALE:
2018.01.29 [Link] +07'00' INTERNATIONAL
THIS DRAWING AND THE INFORMATION CONTAINED HERE IN IS THE PROPERTY OF JACON PTE. LTD.
DRAWING No.:
Sign :..................................... INTERNATIONAL PTE. LTD. AND MUST NOT BE COPIED, REPRODUCED OR USED WITHOUT THE
WRITTEN PERMISSION OF JACON INTERNATIONAL PTE. LTD.
AOC-0143 REV: -- APP' D DB 27-Jan-18 SHEET: 1 / 3
6 5 4 3 2 1
\\Gmv-e\d\GMVN-ENGINEER\AOC\[Link]
6 5 4 3 2 1
ITEM QTY PART NUMBER DESCRIPTION MATERIAL MASS
1 2 AOC-0105 SOLID END 4" Steel, Mild 0,9 kg
2 1 AOC-0143-2 4'' EBOWL VHB. 114/ 102(VHB114102M01) 11,2 kg
D D
6 1
2
DRAWING REGISTER
No. A (DEG) PART NUMBER DESCRIPTION NOTE
1 22 AOC-0143-22 4" X 22 DEG WITH ENDS STANDARDXR500 BEND
2 30 AOC-0143-30XL500 4'' x 30DEG x R500 BEND
3 45 AOC-0143-45XL500 4'' x 45DEG x R500 BEND
4 90 AOC-0143-90XL450 4'' x 90DEG x R500 BEND
2
C C
1
R500
B 6 B
6
1
40
16,5
101,6
123,2
ALL SHARP EDGES TO BE REMOVED OVER TITLE:
NOMINAL 0 6 30 120 400 1000 TOTAL WEIGHT
A GMVN APPROVAL /DEBURRED. ALL WELD SPATTER TO BE
REMOVED. SIZE TO 6 30 120 400 1000 2000 LONG RAD BEND 4'' (Kgs):
A
UNLESS OTHERWISE SPECIFIED DIMENSIONS DRAWN HT 27-Jan-18
MACHINED +/- 0.1 0.1 0.2 0.2 0.5 1 PROJECT:
27-Jan-18
Date :....................................
ARE IN MILIMETERS. THE TOLERANCES ON
DIMENSIONS FOR WHICH NO LIMITS ARE GIVE
SHALL BE SHOWN AS BELOW FABRICATED +/- 1 1 2 2 3 4 AOC NT 27-Jan-18 SCALE:
2018.01.29 JACON
INTERNATIONAL
CHK'D
DRAWING No.:
[Link] +07'00' THIS DRAWING AND THE INFORMATION CONTAINED HERE IN IS THE PROPERTY OF JACON PTE. LTD.
Sign :..................................... INTERNATIONAL PTE. LTD. AND MUST NOT BE COPIED, REPRODUCED OR USED WITHOUT THE
WRITTEN PERMISSION OF JACON INTERNATIONAL PTE. LTD.
AOC-0143 REV: -- APP' D DB 27-Jan-18 SHEET: 2 / 3
6 5 4 3 2 1
\\Gmv-e\d\GMVN-ENGINEER\AOC\[Link]
6 5 4 3 2 1
ITEM QTY PART NUMBER DESCRIPTION MATERIAL MASS
1 2 AOC-0105 SOLID END 4" Steel, Mild 0,9 kg
2 1 AOC-0143-3 4'' EBOWL VHB. 114/ 102(VHB114102M01) 11,3 kg
D D
DRAWING REGISTER
No. A (DEG) PART NUMBER DESCRIPTION NOTE
1 90 AOC-0143-30XL LONG RAD BEND 4'' X 30 DEG X R1500
6
C C
R1500
1 A
B B
16,5
40
101,6
123,2
ALL SHARP EDGES TO BE REMOVED OVER TITLE:
NOMINAL 0 6 30 120 400 1000 TOTAL WEIGHT
A GMVN APPROVAL /DEBURRED. ALL WELD SPATTER TO BE
REMOVED. SIZE TO 6 30 120 400 1000 2000 LONG RAD BEND 4'' (Kgs):
A
UNLESS OTHERWISE SPECIFIED DIMENSIONS DRAWN HT 27-Jan-18
MACHINED +/- 0.1 0.1 0.2 0.2 0.5 1 PROJECT:
27-Jan-18
Date :....................................
ARE IN MILIMETERS. THE TOLERANCES ON
DIMENSIONS FOR WHICH NO LIMITS ARE GIVE
SHALL BE SHOWN AS BELOW FABRICATED +/- 1 1 2 2 3 4 AOC NT 27-Jan-18 SCALE:
2018.01.29 JACON
INTERNATIONAL
CHK'D
DRAWING No.:
[Link] +07'00' THIS DRAWING AND THE INFORMATION CONTAINED HERE IN IS THE PROPERTY OF JACON PTE. LTD.
Sign :..................................... INTERNATIONAL PTE. LTD. AND MUST NOT BE COPIED, REPRODUCED OR USED WITHOUT THE
WRITTEN PERMISSION OF JACON INTERNATIONAL PTE. LTD.
AOC-0143 REV: -- APP' D DB 27-Jan-18 SHEET: 3 / 3
6 5 4 3 2 1
\\Gmv-e\d\GMVN-ENGINEER\AOC\[Link]
