Test Report SL52125335137501MV Date:December 20,2021 Page 1 of 7
GREENMIST PACKAGING INTERNATIONAL LTD.
WORKSHOP 60, 3/F, BLOCK A, EAST SUN INDUSTRIAL CENTRE NO. 16 SHING YIP STREET KOWLOON
The following sample(s) was/were submitted and identified on behalf of the client as:
Sample Description : Aerosol Metering Valves
Sample Color : /
Sample Size : 70 pcs + 2 Boxes
Brand : GreenMist
Models : GMSC-1027T176; GSMC-378-197; GSMC-1028-T140; GSMC-1029-T176.
SGS Internal [Link]. : VNHL2111022516HG
Test Performed : Selected test(s) as requested by applicant
Sample Receiving Date : Dec 06, 2021
Testing Period : Dec 09, 2021 - Dec 20, 2021
Test Result(s) : Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested, for further details, please refer to the following page(s).
Standard : COVENIN 2080-1988
Signed for and on behalf of
SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd Testing Center
Sara Guo (Account Executive)
SGS does not verify authenticity of any Brand/Trademark of products. Buyers must check if the product
is genuine with the Brand/Trademark owner directly.
Test Report SL52125335137501MV Date:December 20,2021 Page 2 of 7
Purpose of the test.
Verification of the conformity of the technical characteristics of the model described in paragraph 2,
with respect to the subsections that are applicable to the equipment and that are specified in the
Venezuelan Standard COVENIN 2080:1988 “25.4 mm diameter aerosol valves”.
3. Identification of the Test Equipment
To carry out the planned tests, the following equipment was available:
- Vacuum pump according to specifications of the COVENIN STANDARD 2080:1988 and according to
figure 4 of the same standard.
- Aluminum block with a metal ruler graduated in millimeters (mm) according to figure 5 of the same
standard.
- Set of stainless pins with external diameters calibrated according to figure 6 of the same standard.
- Dynamometer with movable scale, maximum reading 10 kg with fixed reading according to figure 7 of
the same standard.
4. Classification
[Link] Metering Valves Pass
[Link] Male Type Pass
Test Report SL52125335137501MV Date:December 20,2021 Page 3 of 7
5.1.1 Aerosol Valve Components
GMSC-1027T176
Component Part No. Part Description
[Link] Both-side clear lacquered
CS3-B-1
cup tinplate, with lower dimples.
[Link]
GO-A17 Buna
gasket
[Link] gasket GI-A1 Buna
PA/POM. Double Orifices
[Link] SS2-51-1 2xΦ0.020" (2xΦ0.51mm)
(Light Orange)
[Link] TS-2 Stainless Steel (SUS304)
PA/POM. Orifice
[Link] HS200-51-1 Φ0.080"xΦ0.02"
(Φ2.0xΦ0.51mm) (Blue)
[Link] D300-1 PE. (Natural)
GAS41-
[Link] PP. Red, Φ 0.040"(1.0mm)
100A02
Test Report SL52125335137501MV Date:December 20,2021 Page 4 of 7
GSMC-378-197
Component Part No. Part Description
[Link] Both-side clear lacquered
CS3-B-1
cup tinplate, with lower dimples.
[Link]
GO-A17 Buna
gasket
[Link] gasket GI-A1 Buna
PA/POM. Double Orifices
[Link] SS2-51-1 2xΦ0.020" (2xΦ0.51mm)
(Light Orange)
[Link] TS-2 Stainless Steel (SUS304)
PA/POM. Orifice
[Link] HS200-51-1 Φ0.080"xΦ0.02"
(Φ2.0xΦ0.51mm) (Blue)
[Link] D300-1 PE. (Natural)
Test Report SL52125335137501TX Date:December 20,2021 Page 5 of 7
GSMC-1028-T140
Component Part No. Part Description
[Link] Both-side clear lacquered
CS3-B-1
cup tinplate, with lower dimples.
[Link]
GO-A17 Buna
gasket
[Link] gasket GI-B5 Neoprene
PA/POM. Double Orifices
[Link] SS2-51-1 2xΦ0.020" (2xΦ0.51mm)
(Light Orange)
[Link] TS-2 Stainless Steel (SUS304)
PA/POM. Orifice
[Link] HS200-51-1 Φ0.080"xΦ0.02"
(Φ2.0xΦ0.51mm) (Blue)
[Link] D300-1 PE. (Natural)
PP. Red, Can be
[Link] GAS00-102
assembled with insert.
PA, MBU. Plane, Yellow,
[Link] ISP46-1
Ф0.46mm
Test Report SL52125335137501TX Date:December 20,2021 Page 6 of 7
GSMC-1029-T176
Component Part No. Part Description
[Link] Both-side clear lacquered
CS3-B-1
cup tinplate, with lower dimples.
[Link]
GO-A17 Buna
gasket
[Link] gasket GI-B5 Neoprene
PA/POM. Double Orifices
[Link] SS2-51-1 2xΦ0.020" (2xΦ0.51mm)
(Light Orange)
[Link] TS-2 Stainless Steel (SUS304)
PA/POM. Orifice
[Link] HS200-51-1 Φ0.080"xΦ0.02"
(Φ2.0xΦ0.51mm) (Blue)
[Link] D300-1 PE. (Natural)
PP. White, Can be
[Link] GAS00-102
assembled with insert.
PA, MBU. Plane, Green,
[Link] ISP46-1
Ф0.51mm
Test Report SL52125335137501TX Date:December 20,2021 Page 7 of 7
Immersion Tube
Component Part No. Part Description
PP. Outside
Red extension Dia.:Φ2.15mm
EA1-100
tube Inside Dia.:Φ1.10mm
Length: 4.72"(120mm)
7.2 Determination of Dimension A-D
CONTAINER
MODEL DIMENSION A-D ± 3mm COMMENT
DESIGNATION
GMSC-1027T176 65 x 158 (211 x 604) 176 Pass
GSMC-378-197 52 x 190 (202 x 708) 197 Pass
SMC-1028-T140 65 x 122 (211 x 413) 140 Pass
GSMC-1029-T176 65 x 158 (211 x 604) 176 Pass
7.3 Determination of the Dimensions of the holes of the valve components
Complies with the diameter stipulated by the manufacturer.
7.4 Determination of aerosol valve dip tube retention
Complies with the determination of the required force.
8 Marking and Packaging
The packaging is made of suitable material that does not allow damage or contamination. The packaging
of the valves is printed with the name of the supplier, model and type of valve, quantity it contains and the
specific characteristics of the valve components.
Note: the obvious space limitations in the design of the aerosol valves do not allow their marking.
Product information is provided by applicant without verification or authentication of the brand.
***End of Report***
