Dell Technologies Rail, Bracket, and Tray

Guide
June 2021

June 2021
Rev. A00
Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid
the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

© 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other
trademarks may be trademarks of their respective owners.
 Contents

Chapter 1: Rails............................................................................................................................. 4
Rack rails................................................................................................................................................................................4
Rack rails technical details................................................................................................................................................ 9

Chapter 2: Brackets..................................................................................................................... 11
Brackets................................................................................................................................................................................ 11
Brackets technical details................................................................................................................................................ 19

Chapter 3: Trays..........................................................................................................................22
Trays.....................................................................................................................................................................................22
Trays technical details......................................................................................................................................................24

Chapter 4: Quick reference......................................................................................................... 25

Chapter 5: Dell EMC support....................................................................................................... 28

Contents 3
 1
Rails
The following sections describe Dell EMC Networking rack rails.
Topics:
• Rack rails
• Rack rails technical details

Rack rails
For a list of switching equipment with appropriate rails, see the Quick reference section.

Table 1. Rails
Abbreviation Rail description Rack Part SKU Additional information
height number
1U-S-RR Standard ReadyRail (1) 1U N243X 770-BBGY, Standard Dell ReadyRail mounting slides.
770-BDRL A5. For a 434-mm (17.08-in) wide switch.
1U-R-RR Reversible ReadyRail 1U J9CKF 770-BCFQ Standard Dell ReadyRail where the rails
can be reversed. For a 434-mm (17.08-in)
wide switch.
● Bi-directional Ingress/Egress switch
installation (Install from either front or
rear of rack).
● In-rail power cord routing access and
cord stabilizer (for example, route
power cord through egress spot in the
rail itself).
1U-M-RR Modified ReadyRail 1U HRTVK 770-BCIN Similar to the Standard ReadyRail but with
the stop removed. Supports a 450 mm to
793 mm (17.72 in to 31.2 in)-rack span.
2U-S-RR Standard ReadyRail (1) 2U 6CJRH 770-BBJF Standard B9 ReadyRail mounting slides.
Use with the Z9264F-ON, S6100-ON, or
S5296-ON products.
2U-E-RR Extended ReadyRail 2U NKFHM 575-BBMQ Must be used with the standard B9
ReadyRail but built specifically for reverse-
install scenarios. Permits an extra 9” face
offset to align with longer servers.
1U-Z93xx-RR Z9332F-ON ReadyRail 1U 08P6H 770-BDKS Use with a 438.5 mm (17.26 in)-wide
switch. Uses a different screw placement
from the standard ReadyRails. The rack
span is 17.18 to 32.30 inches (436.4 mm
to 820.4 mm).
1U-S52- S5212F-ON & S4112-ON 1U TTVK9 N/A Use these rails with the S5212F-ON or
S41-12-4P Series rails. Use with the S4112-ON Series dual-trays in four-post
S5212F-ON dual-tray. installations.
1U-EMC-3.14- EMC Gen3.14 bezel rails 1U 19T1K N/A EMC rails to use in rear-mount (I/O-side
RR of the switch faces the back of the
rack) four-post racks. Use with a 434-mm
(17.08-in) wide switch.

4 Rails
Table 1. Rails (continued)
Abbreviation Rail description Rack Part SKU Additional information
height number
● 558.8-mm, 711.2-mm, or 787.4-mm
(22-in, 28-in, or 31-in) offset
● 558.8 mm to 863.6 mm (22 in to 34 in)
rack span
1U-EMC-3-RR EMC Gen 3 bezel rails 1U V45CP N/A EMC rails to use in rear-mount (I/O-side
of the switch faces the back of the
rack) four-post racks. Use with a 434-mm
(17.08-in) wide switch.
● 558.8-mm, 711.2-mm, or 787.4-mm
(22-in, 28-in, or 31-in) offset.
● 558.8 mm to 863.6 mm (22 in to 34 in)
rack span.
2U-EMC- Z9264F-ON bezel rails for 2U 150-042- N/A Platform-specific rails used with Gen3.14
Z92xx-RR EMC 2RU Gen3.14/Gen3 005 or Gen3 bezel rails. Use these EMC rails
bezel with rear-mount (I/O-side of the switch
faces the back of the rack), four-post
racks.
● 558.8-mm, 711.2-mm, or 787.4-mm
(22-in, 28-in, or 31-in)offset.
● 558.8 mm to 914 mm (22 in to 36 in)
rack span.
1U-DN-RR Z9432F-ON & S5448F- 1U TDYXP 770-BDYT For a 438.5 mm (17.26 in)-wide
ON Special ReadyRails switch. Different screw placement from
the standard ReadyRails. Four-post rack-
mount installations. Rack span is 539.7 mm
to 1041.4 mm (21.25 in to 41 in).
2U-DN-RR Z9664F-ON ReadyRails 2U N7WVX Not Platform-specific ReadyRail
available yet
2U-DN-EMC- Z9664F-ON Special Rail 2U JGF0H Not Special type of platform-specific ReadyRail
RR kit available yet

(1) Extended NEBS "Deep rack" rails for 2RU switches available upon request.

1U-S-RR: 1RU Standard ReadyRail (N243X)

Use with a 434-mm (17.08-in) wide switch.

1U-R-RR: 1RU Reversible ReadyRail (J9CKF)

Bidirectional Ingress/Egress. In-rail power cord route access and stabilizer. Use with a 434-mm (17.08-in) wide switch.

Rails 5
1U-M-RR: 1RU Modified ReadyRail (Nokia-specific rail) (HRTVK)
Similar to the Standard ReadyRail but with the stop removed. Supports a 450 mm to 793 mm (17.72 in to 31.2 in)-rack span.

2U-S-RR: 2RU Standard ReadyRail (6CJRH)

Use with the Z9264F-ON, S6100-ON, or S5296-ON products.

2U-E-RR: 2RU ReadyRail Extension kit (NKFHM)

For reverse-install scenarios. Permits an extra 9” face offset to align with longer servers.

NOTE: Must be used with the standard ReadyRail kit, B9.

6 Rails
1U-Z93xx-RR: Z9332F-ON ReadyRails (08P6H)
For four-post racks.

1U-S52-S41-12-4P: S5212F-ON or S4112-ON Series rails (TTVK9)

For four-post racks. Use with the S5112F-ON or S4112-ON Series dual-trays.

1U-EMC-3.14-RR: EMC Gen3.14 bezel rails (19T1K)

● For rear-mount (I/O-side of the switch faces the back of the rack) four-post rack installation.
● 22-in, 28-in, or 31-in offset (558.8-mm, 711.2-mm, or 787.4-mm offset).
● The rack span is 22 in to 34 in (558.8 mm to 863.6 mm wide).
● Use with a 434-mm (17.08-in) wide switch.

Rails 7
1U-EMC-3-RR: EMC Gen 3 bezel rails (V45CP)
● For rear-mount (I/O-side of the switch faces the back of the rack) four-post rack installation.
● 22-in, 28-in, or 31-in offset (558.8-mm, 711.2-mm, or 787.4-mm offset).
● The rack span is 22 in to 34 in (558.8 mm to 863.6 mm).
● Use with a 434-mm (17.08-in) wide switch.

2U-EMC-Z92xx-RR: Z9264F-ON rails for EMC 2RU Gen3.14/Gen3

bezel (150-042-005)

8 Rails
1U-DN-RR: Z9432F-ON & S5448F-ON Special ReadyRails (TDYXP)

● Four-post rack.
● Rack span is 21.25 in to 41 in (539.7 mm to 1041.4 mm).

2U-DN-RR: Z9664F-ON ReadyRails (N7WVX)

2U-DN-EMC-RR: Z9664F-ON Special Rails (JGF0H)

Rack rails technical details

Table 2. Rack types supported
Product Two-post Two-post Two-post Four-post Four-post Four-post
square support round support threaded square support round support threaded
support support
1U-S-RR Yes: not Yes: not Yes: not Yes Yes Yes
recommended recommended recommended
1U-R-RR Yes: not Yes: not Yes: not Yes Yes Yes
recommended recommended recommended

Rails 9
Table 2. Rack types supported (continued)
Product Two-post Two-post Two-post Four-post Four-post Four-post
square support round support threaded square support round support threaded
support support
1U-M-RR Yes: not Yes: not Yes: not Yes Yes Yes
recommended recommended recommended
2U-S-RR No No No Yes Yes Yes
2U-E-RR No No No Yes Yes Yes
1U-Z93xx-RR No No No Yes Yes Yes
1U-S52- No No No Yes Yes Yes
S41-12-4P
1U-EMC-3.14- No No No Yes Yes Yes
RR
1U-EMC-3-RR No No No Yes Yes Yes
2U-EMC-Z92xx- No No No Yes Yes Yes
RR
1U-DN-RR No No No Yes Yes Yes
2U-DN-RR No No No Yes Yes Yes
2U-DN-EMC- No No No Yes Yes Yes
RR

Table 3. Rail adjustability range

Product Square Square Round Round Threaded Threaded
minimum maximum minimum maximum minimum maximum
1U-S-RR 470 770 456 763 462 794
1U-R-RR 572 770 560 763 580 794
1U-M-RR 450 770 450 763 450 794
2U-S-RR 595 914 581 907 595 929
2U-E-RR 595 914 581 907 595 929
1U-Z93xx-RR 457 787 457 787 457 787
1U-S52- 660.4 812.8 660.4 812.8 660.4 812.8
S41-12-4P
1U-EMC-3.14- 558.8 863.6 558.8 863.6 558.8 863.6
RR
1U-EMC-3-RR 558.8 863.6 558.8 863.6 558.8 863.6
2U-EMC-Z92xx- 558.8 914 558.8 914 558.8 914
RR
1U-DN-RR 539.7 1041.4 539.7 1041.4 539.7 1041.4
2U-DN-RR 558.8 1066.8 558.8 1066.8 558.8 1066.8
2U-DN-EMC- 584.2 787.4 584.2 787.4 584.2 787.4
RR

10 Rails
 2
Brackets
The following sections describe Dell EMC Networking brackets. Brackets are used with rack-, wall-, or ceiling-mount
installations.
Topics:
• Brackets
• Brackets technical details

Brackets
For a list of switching equipment with appropriate brackets, see the Quick reference section.

Table 4. Brackets
Abbreviation Rail description Rack Part SKU Additional information
height number
1U-4P-BR Four-post brackets 1U G46RV 770- For a 434-mm (17.08-in) wide switch, four-
BCGP, post mount. Requires mounting screws. Also
770-BDRI, works with VEP4600.
770-BDLC
1U-2P-BR Two-post brackets 1U 5PX47 770-BCGL For a 434-mm (17.08-in) wide switch, 5-in
offset, two-post mount. Requires mounting
screws. Also works with VEP4600.
1U-XSeries- X-Series Rack-Mount Kit 1U 7YYKH 575-BBEE Platform-specific rack-mount kit for a single
BR switch in a 1RU rack. For X1018, X1018P,
X1026, X1026P, or X4012 products.
WM-XSer- X- and N-Series wall-mount N/A 9JM64 575- Wall-mount brackets for the N1108T-ON,
NSer-BR brackets BBNW N1108P-ON, X1018, X1026, X1052, or X4012
products. Does not work with X1108.
1U-NSer-BR N-Series rack-mount 1U HCDHT 575-BBJS Rack-mount brackets for the N1124T/P-
brackets ON, N1148T/P-ON, N2024/P, N2048/P,
N1524/P, or N1548/P products.
1U-NSer- N- and S-Series rack-mount 1U 7YYKH 575-BBEE Rack-mount brackets for the N1108P/T,
SSer-BR brackets N1108EP, S4112F-ON or S5212F-ON
products.
1U-Z93xx-BR Z9332F-ON four-post 1U RVH5J 770-BDRV Use in a four-post rack. Rack span is 27.56
brackets to 35.83 inches (700 mm to 910 mm).
1U-N22-N32- N2200-ON / N3200-ON 1U 2V6KK 770-BDLH Brackets for MPS-3S two-post flush-mount
BR Series MPS-3S flush-mount or 5-in offset (127-mm offset) mount
or offset-mount brackets installations. Does not work with N3208PX-
ON.
1U-N22-N32- N2200-ON / N3200-ON 1U PR8P0 770-BDLF, Brackets for the MPS-1S two-post flush-,
FM-BR Series MPS-1S flush-mount, 770- 5-in offset- (127-mm offset), or rear-mount
offset-mount, or rear- BDKW installations. Does not work with N3208PX-
mount brackets ON.
WM-N22- N2224-ON / N3224-ON N/A 1DHH0 770- Brackets for the N2224-ON 24-port or
N32-WM-BR MPS-1S and 24-port wall- BDLG, N3224-ON 24-port switches and MPS-1S
mount brackets 575-BCFL

Brackets 11
Table 4. Brackets (continued)
Abbreviation Rail description Rack Part SKU Additional information
height number
wall-mount installations. Does not work with
N3208PX-ON.
WM- N3208PX-ON Wall-mount N/A TK3JM 750-ACPV N3208PX-ON wall-mount bracket.
N320xPC- brackets
WM-BR
WM- N3208PX-ON DIN rail- N/A YP5PR 770- Use with TK3JM for special rail mount.
N3208PX- mount bracket BDKY,
DIN-WM-BR 575-BCFH
1U- N3208PX-ON rack-mount 1U C94XW 770-BDLE, N3208PX-ON two-post flush-mount and
N3208PX-2P- brackets 575-BCFK offset-mount installations.
BR
BR-N3208PX- N3208PX-ON external N/A N8JNG 264- External power adapter (EPA) holder for the
E-BAT-BR power adapter battery BBBN, N3208PX-ON switch.
holder 575-BCFI
1U-N3208P- N3208PX-ON external 1U 39VWT 770- Use with two external power adapter holder,
E-2BAT-BR power adapter two-battery BDLB, two-post flush-mount and offset-mount
holder brackets 770-BDRN installations.
1U-N3208PX- N3208PX-ON external 1U MR8H4 770- External power adapter holder for one
E-BAT-2P-BR power adapter one-battery BDRO, N3208PX-ON switch and one battery in a
for two-post mount 770-BDKZ 1RU two-post installation.
2U-N3208P- N3208PX-ON external 2U YTM40 770- External power adapter holder for one
E-2BAT-2P- power adapter two-battery BDRJ, N3208PX-ON switch and two batteries in a
BR for two-post mount 770-BDKX 2RU two-post installation.
1U-N3208P- N3208PX-ON external 1U 1MJP0 770-BDRI, External power adapter holder for one
E-BAT-4P-BR power adapter one-battery 770-BDLC N3208PX-ON switch and one battery in a
for four-post mount 1RU four-post installation.
1U-DN-4P-BR Z9432F-ON & S5448F-ON 1U 7PGWK 575-BCHY Platform-specific four-post bracket for
L-brackets Z9432F-ON or S5448F-ON switches. Rack
span is 22 in to 36 in (558.8 mm to 914.4
mm).
BR-VEP-WM- VEP14xx, Edge 61xx, or 510 N/A G90MW 575-BCCK For the VEP14xx, Edge 61xx, or 510
BR wall-mount brackets platforms.

1U-4P-BR: Four-post brackets (G46RV)

For a 434-mm (17.08-in) wide switch, four-post mount.

12 Brackets
1U-2P-BR: Two-post brackets (5PX47)
For a 434-mm (17.08-in) wide switch, 5-in offset, two-post mount.

1U-XSeries-BR: X-Series Rack-Mount Kit (7YYKH)

WM-XSer-NSer-BR: X- and N-Series wall-mount brackets (9JM64)

Wall-mount brackets for the N1108T-ON, N1108P-ON, X1018, X1026, X1052, or X4012 products.

1U-NSer-BR: N-Series rack-mount brackets (HCDHT)

Rack-mount brackets for the N1124T/P-ON, N1148T/P-ON, N2024/P, N2048/P, N1524/P, or N1548/P products.

Brackets 13
1U-NSer-SSer-BR: N- and S-Series rack-mount brackets (7YYKH)
Rack-mount brackets for the N1108P/T, N1108EP, S4112F-ON or S5212F-ON products

1U-Z93xx-BR: Z9332F-ON four-post brackets (RVH5J)

1U-N22-N32-BR: N2200-ON / N3200-ON Series MPS-3S flush-

mount or offset-mount brackets (2V6KK)
Two-post rack. Flush-mount or 5-in offset (127-mm offset) middle-mount installations.

14 Brackets
1U-N22-N32-FM-BR: N2200-ON / N3200-ON Series MPS-1S flush-
mount, offset-mount, or rear-mount brackets (PR8P0)
Two-post rack. Flush-mount, rear-mount, or 5-in offset (127-mm offset) offset-mount installations.

WM-N22-N32-WM-BR: N2224-ON / N3224-ON MPS-1S and 24-port

wall-mount brackets(1DHH0)

Brackets 15
WM-N320xPC-WM-BR: N3208PX-ON wall-mount bracket (TK3JM)

WM-N3208PX-DIN-WM-BR: N3208PX-ON DIN rail-mount bracket

(YP5PR)

1U-N3208PX-2P-BR: N3208PX-ON rack-mount brackets (C94XW)

N3208PX-ON two-post flush-mount and offset-mount brackets.

16 Brackets
BR-N3208PX-E-BAT-BR: N3208PX-ON external power adapter
battery holder (N8JNG)

1U-N3208P-E-2BAT-BR: N3208PX-ON external power adapter two-

battery holder brackets (39VWT)
Two EPA holder, two-post flush-mount and offset-mount brackets.

1U-N3208PX-E-BAT-2P-BR: N3208PX-ON external power adapter

one-battery for two-post mount (MR8H4)

Brackets 17
2U-N3208P-E-2BAT-2P-BR: N3208PX-ON external power adapter
two-battery for two-post mount (YTM40)

1U-N3208P-E-BAT-4P-BR: N3208PX-ON external power adapter

one-battery for four-post mount (1MJP0)

1U-DN-4P-BR: Z9432F-ON & S5448F-ON brackets (7PGWK)

● Four-post rack.
● Rack span is 22 in to 36 in (558.8 mm to 914.4 mm)

18 Brackets
BR-VEP-WM-BR: VEP14xx, Edge 61xx, or 510 wall-mount brackets
(G90MW)

Brackets technical details

Table 5. Rack types supported
Product Two-post Two-post Two-post Four-post Four-post Four-post
square support round support threaded square support round support threaded
support support
1U-4P-BR No No No Yes Yes Yes
1U-2P-BR Yes Yes Yes No No No
1U-XSeries-BR N/A N/A N/A N/A N/A N/A
WM-XSer- N/A N/A N/A N/A N/A N/A
NSer-BR
1U-NSer-BR Yes Yes Yes No No No
1U-NSer-SSer- Yes Yes Yes No No No
BR
1U-Z93xx-BR No No No Yes Yes Yes
1U-N22-N32-BR Yes Yes Yes No No No
1U-N22-N32- Yes Yes Yes No No No
FM-BR
WM-N22-N32- No No No No No No
WM-BR
WM-N320xPC- No No No No No No
WM-BR
WM-N3208PX- N/A N/A N/A N/A N/A N/A
DIN-WM-BR
1U- Yes Yes Yes No No No
N3208PX-2P-
BR
BR-N3208PX- N/A N/A N/A N/A N/A N/A
E-BAT-BR
1U-N3208P- Yes Yes Yes No No No
E-2BAT-BR
1U-N3208PX-E- Yes Yes Yes No No No
BAT-2P-BR

Brackets 19
Table 5. Rack types supported (continued)
Product Two-post Two-post Two-post Four-post Four-post Four-post
square support round support threaded square support round support threaded
support support
2U-N3208P- Yes Yes Yes No N0 No
E-2BAT-2P-BR
1U-N3208P-E- No No No Yes Yes Yes
BAT-4P-BR
1U-DN-4P-BR No No No Yes Yes Yes
BR-VEP-WM- N/A N/A N/A N/A N/A N/A
BR

Table 6. Bracket adjustability range

Product Square Square Round Round Threaded Threaded
minimum maximum minimum maximum minimum maximum
1U-4P-BR 609 762 609 762 609 762
1U-2P-BR N/A N/A N/A N/A N/A N/A
1U-XSeries-BR N/A N/A N/A N/A N/A N/A
WM-XSer- N/A N/A N/A N/A N/A N/A
NSer-BR
1U-NSer-BR N/A N/A N/A N/A N/A N/A
1U-NSer-SSer- N/A N/A N/A N/A N/A N/A
BR
1U-Z93xx-BR 457 787 457 787 457 787
1U-N22-N32-BR N/A N/A N/A N/A N/A N/A
1U-N22-N32- N/A N/A N/A N/A N/A N/A
FM-BR
WM-N22-N32- N/A N/A N/A N/A N/A N/A
WM-BR
WM-N320xPC- N/A N/A N/A N/A N/A N/A
WM-BR
WM-N3208PX- N/A N/A N/A N/A N/A N/A
DIN-WM-BR
1U- N/A N/A N/A N/A N/A N/A
N3208PX-2P-
BR
BR-N3208PX- N/A N/A N/A N/A N/A N/A
E-BAT-BR
1U-N3208P- N/A N/A N/A N/A N/A N/A
E-2BAT-BR
1U-N3208PX-E- N/A N/A N/A N/A N/A N/A
BAT-2P-BR
2U-N3208P- 660.4 812.8 660.4 812.8 660.4 812.8
E-2BAT-2P-BR
1U-N3208P-E- N/A N/A N/A N/A N/A N/A
BAT-4P-BR
1U-DN-4P-BR 558.8 914.4 558.8 914.4 558.8 914.4

20 Brackets
Table 6. Bracket adjustability range (continued)
Product Square Square Round Round Threaded Threaded
minimum maximum minimum maximum minimum maximum
BR-VEP-WM- N/A N/A N/A N/A N/A N/A
BR

Brackets 21
 3
Trays
The following sections describe Dell EMC Networking rack trays.
Topics:
• Trays
• Trays technical details

Trays
For a list of switching equipment with appropriate trays, see the Quick reference section.

Table 7. Trays
Abbreviation Rail description Rack Part SKU Additional information
height number
1U-S41- S4112-ON fast access; half-rack, 1U 0P7H1 770- Dual-tray mount for two S4112F-ON
HRACK-TR side-by-side BCQZ units for a four-post mount.
1U-XSer-NSer- X-Series or N-Series Tandem 1U XRN98 770- ● Default tray provisioned with
SbS-4P-TR Switch Tray, holds 2x (N1108T-ON, BBNQ four-post brackets. Tray content
N1108P-ON, X1018, X1026, X1026P, change requires removal of the
X4012) in 1RU, 4-post racks entire tray.
● Dell Networking Tandem Switch
Tray, holds 2x of N1108T-ON,
N1108P-ON, X1018, X1026, X1026P,
X4012 in 1RU, four-post rack only.
1U-S52- S5212F-ON dual-tray 1U 2VMV9 770- Dual-tray mount for two S5212F-ON
SbS-4P-TR BDGQ units for a four-post mount.
TR-REL- S4112F-ON or S5212F-ON release N/A DKKPD Not for Release lever to be used with the
LEVR-BR lever individual S4112F-ON or S5212F-ON dual-trays.
sale
VEP-SbS-TR VEP14xx, Edge 61xx, or 510 dual 1U 8Y32N 770-- Dual-tray mount for VEP14xx, Edge
tray BCZE 61xx, or 510 dual tray. Front mount
only. Two- or four-post, square, round,
or threaded racks.

1U-S41-HRACK-TR: S4112-ON fast access - side-by-side dual-tray

(0P7H1)
Default tray provisioned with four-post brackets. Tray supports optional ReadyRail sliders. Tray content change accessible from
the front panel. Without cable retention bracket and clip. Rails included with tray kit. Half-rack, side-by-side mounting tray.

22 Trays
1U-XSer-NSer-SbS-4P-TR: X-Series or N-Series Tandem Switch Tray
(XRN98)
For four-post racks. Half-rack, side-by-side mounting tray.
● Default tray provisioned with four-post brackets. Tray content change requires removal of the entire tray.
● Holds 2x of N1108T-ON, N1108P-ON, X1018, X1026, X1026P, X4012 in 1RU, four-post rack only.

1U-S52-SbS-4P-TR: S5212F-ON Series dual-tray (2VMV9)

One RU. For four-post racks. Half-rack, side-by-side mounting tray.

TR-REL-LEVR-BR: S4112F-ON or S5212F-ON release lever (DKKPD)

Release lever to be used with the S4112F-ON or S5212F-ON dual-trays.

VEP-SbS-TR: VEP14xx, Edge 61xx, or 510 dual tray (8Y32N)

A full-rack tray.
● Front mount only.
● Two- or four-post, square, round, or threaded racks.

Trays 23
Trays technical details
Table 8. Rack types supported
Product Two-post Two-post Two-post Four-post Four-post Four-post
square support round support threaded square support round support threaded
support support
1U-S41-HRACK- No No No Yes Yes Yes
TR
1U-XSer-NSer- No No No Yes Yes Yes
SbS-4P-TR
1U-S52- No No No Yes Yes Yes
SbS-4P-TR
TR-REL-LEVR- No No No Yes Yes Yes
BR
VEP-SbS-TR Yes Yes Yes Yes Yes Yes

Table 9. Tray adjustability range

Product Square Square Round Round Threaded Threaded
minimum maximum minimum maximum minimum maximum
1U-S41-HRACK- 609 762 609 762 609 762
TR
1U-XSer-NSer- 559 762 559 762 559 762
SbS-4P-TR
1U-S52- 609 762 609 762 609 762
SbS-4P-TR
TR-REL-LEVR- N/A N/A N/A N/A N/A N/A
BR
VEP-SbS-TR N/A N/A N/A N/A N/A N/A

24 Trays
 4
Quick reference
The following table is a quick reference guide of abbreviations, products, and rails, brackets, or trays by Dell Technologies part
number.

Table 10. Rails, brackets, or trays listed by abbreviation and Dell part number
Abbreviation Product Part Number
1RU-S-RR 1RU Standard ReadyRail N243X
1RU-R-RR 1RU Reversible ReadyRail J9CKF
1RU-M-RR 1RU Modified ReadyRail HRTVK
2U-S-RR 2RU Standard ReadyRail 6CJRH
2U-E-RR 2RU Extended ReadyRail NKFHM
1U-Z93xx-RR 1RU Z9332F-ON ReadyRail 08P6H
1U-S52-S41-12-4P 1RU S5212F-ON and S4112-ON Series rails TTVK9
1U-EMC-3.14-RR 1RU EMC Gen3.14 bezel rails 19T1K
1U-EMC-3-RR 1RU EMC Gen3 bezel rails V45CP
2U-EMC-Z92xx-RR 2RU Z9264F-ON rails for EMC 2RU Gen3.14/Gen3 bezel 150-042-005
1RU-DN-RR 1RU Z9432F-ON and S5448F-ON Special ReadyRails TDYXP
2U-DN-RR 2RU Z9664F-ON ReadyRails N7WVX
2U-DN-EMC-RR 2RU Z9664F-ON Special Rail kit JGF0H
1U-4P-BR Four-post brackets G46RV
1U-2P-BR Two-post brackets 5PX47
1U-XSeries-BR X-Series Rack-Mount kit 7YYKH
WM-XSer-NSer-BR X- and N-Series wall-mount brackets 9JM64
1U-NSer-BR N-Series rack-mount brackets HCDHT
1U-NSer-SSer-BR N- and S-Series rack-mount brackets 7YYKH
1U-Z93xx-BR Z9332F-ON four-post brackets RVH5J
1U-N22-N32-BR N2200-ON / N3200-ON Series MPS-3S flush-mount or offset- 2V6KK
mount brackets
1U-N22-N32-FM-BR N2200-ON / N3200-ON Series MPS-1S flush-mount, offset- PR9P0
mount, or rear-mount brackets
WM-N22-N32-WM-BR N2224-ON / N3224-ON MPS-1S and 24-port wall-mount 1DHH0
brackets
WM-N320xPC-WM-BR N3208PX-ON Wall-mount brackets TK3JM
WM-N3208PX-DIN-WM-BR N3208PX-ON DIN rail-mount bracket YP5PR
1U-N3208PX-2P-BR N3208PX-ON rack-mount brackets C94XW
BR-N3208PX-E-BAT-BR N3208PX-ON external power adapter battery holder N8JNG
1U-N3208P-E-2BAT-BR N3208PX-ON external power adapter two-battery holder 39VWT
brackets

Quick reference 25
Table 10. Rails, brackets, or trays listed by abbreviation and Dell part number (continued)
Abbreviation Product Part Number
1U-N3208PX-E-BAT-2P-BR N3208PX-ON external power adapter one-battery for two-post MR8H4
mount
2U-N3208P-E-2BAT-2P-BR N3208PX-ON external power adapter two-battery for two-post YTM40
mount
1U-N3208P-E-BAT-4P-BR N3208PX-ON external power adapter one-battery for four-post 1MJP0
mount
1U-DN-4P-BR Z9432F-ON and S5448F-ON L-brackets 7PGWK
BR-VEP-WM-BR VEP14xx, Edge 61xx, 510 wall-mount brackets G90MW
1U-S41-HRACK-TR S4112-ON fast access; half-rack, side-by-side dual tray 0P7H1
1U-XSer-NSer-SbS-4P-TR X-Series or N-Series Tandem switch tray XRN98
1U-S52-SbS-4P-TR S5212F-ON Dual tray 2VMV9
TR-REL-LEVR-BR S4112F-ON or S5212F-ON release lever DKKPD
VEP-SbS-TR VEP14xx, Edge 61xx, or 510 dual tray 8Y32N

The following table lists switch equipment and the rails, brackets, or trays associated with the equipment by part number.

Table 11. Switch equipment for different rails, brackets, or trays by part number
Switch equipment Rails Brackets Trays
510 G90MW 8Y32N
Edge61xx G90MW 8Y32N
Gen3.14 19T1K, 150-042-005
Gen3 V45CP, 150-042-005
N1100 Series 9JM64, HCDHT, 7YYKH
N1108T/P 7YYKH XRN98
N15xx HCDHT
N20xx/N30xx HCDHT
N22xx/N32xx 2V6KK, PR8P0, 1DHH0,
TK3JM
N3208PX TK3JM, YP5PR, C94XW,
N8JNG, 39VWT, MR8H4,
YTM40, 1MJP0
S3048 N243X, J9CKF G46RV
S3100 N243X
S4048 N243X, J9CKF
S4048T N243X, HRTVK, J9CKF
S41xx N243X DKKPD
S4112F/T TTVK9 7YYKH 0P7H1, DKKPD
S4248 N243X
S5148F N243X
S52xx N243X, HRTVK, 6CJRH, 7YYKH 2VMV9, DKKPD
J9CKF
S5212F-ON TTVK9

26 Quick reference
Table 11. Switch equipment for different rails, brackets, or trays by part number (continued)
Switch equipment Rails Brackets Trays
S5448F TDYXP 7PGWK
S6100 HFX63, 6CJRH
VEP14xx G90MW 8Y32N
VEP4600 G46RV, 5PX47
X-Series 9JM64, 7YYKH XRN98
Z9100 N243X, HRTVK, J9CKF
Z9264F 6CJRH, 150-042-005
Z9332F 08P6H RVH5J
Z9432F TDYXP 7PGWK
Z9664F N7WVX, JGF0H

Quick reference 27
 5
Dell EMC support
The Dell EMC support site provides documents and tools to help you use Dell EMC equipment and mitigate network outages.
Through the support site you can obtain technical information, access software upgrades and patches, download available
management software, and manage your open cases. The Dell EMC support site provides integrated, secure access to these
services.
To access the Dell EMC support site, go to www.dell.com/support/. To display information in your language, scroll down to the
bottom of the web page and select your country or region from the drop-down menu.
● To obtain product-specific information, enter the 7-character Service Tag or 11-digit express service code of your switch,
which is found on the pull-out tag, also known as a luggage tag, and click Submit.
● To receive more technical support, click Contact Us. On the Contact Information web page, click Technical Support.
To access switch documentation, go to www.dell.com/manuals/ and enter your switch type.
To search for drivers and downloads, go to the Drivers & Downloads tab for your switch.
To participate in Dell EMC community blogs and forums, go to www.dell.com/community.

28 Dell EMC support