0% found this document useful (0 votes)

146 views13 pages

Jagannath GMS Design Report - With Current Sections

This document contains the analysis of a structural model using STAAD.Pro. It includes the joint coordinates, member incidences, material properties, loads applied, and load combinations analyzed. The model contains 66 joints, 66 members, 6 supports, and is analyzed using an out-of-core basic solver.

Uploaded by

harish gowda

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

146 views13 pages

Jagannath GMS Design Report - With Current Sections

Uploaded by

harish gowda

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

Friday, 16 June 2023 07:23

PAGE NO. 1

****************************************************
* *
* STAAD.Pro CONNECT Edition *
* Version 22.00.00.15 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= JUN 16, 2023 *
* Time= 7:23:25 *
* *
* Licensed to: only @ ::LAVTeam:: (R) *
****************************************************

1. STAAD SPACE DXF IMPORT OF GMS.DXF

INPUT FILE: C:\Users\Sim_O\Desktop\GROUND~1\Structure1.STD
2. START JOB INFORMATION
3. ENGINEER DATE 15JUN23
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT MMS KN
7. JOINT COORDINATES
8. 1 11756.9 778.017 0; 2 10689.5 2122.75 0; 3 9920.37 2256.36 0
9. 4 13564.2 1611.98 0; 5 13126.6 1691.77 0; 6 11756.9 1931.59 0
10. 7 11756.9 468.415 0; 8 11135 2041.57 0; 9 12349.6 1826.77 0
11. 10 11756.9 778.017 2500; 11 10689.5 2122.75 2500; 12 9920.37 2256.36 2500
12. 13 13564.2 1611.98 2500; 14 13126.6 1691.77 2500; 15 11756.9 1931.59 2500
13. 16 11756.9 468.415 2500; 17 11135 2041.57 2500; 18 12349.6 1826.77 2500
14. 19 11756.9 778.017 5000; 20 10689.5 2122.75 5000; 21 9920.37 2256.36 5000
15. 22 13564.2 1611.98 5000; 23 13126.6 1691.77 5000; 24 11756.9 1931.59 5000
16. 25 11756.9 468.415 5000; 26 11135 2041.57 5000; 27 12349.6 1826.77 5000
17. 28 11756.9 778.017 7500; 29 10689.5 2122.75 7500; 30 9920.37 2256.36 7500
18. 31 13564.2 1611.98 7500; 32 13126.6 1691.77 7500; 33 11756.9 1931.59 7500
19. 34 11756.9 468.415 7500; 35 11135 2041.57 7500; 36 12349.6 1826.77 7500
20. 37 11756.9 778.017 10000; 38 10689.5 2122.75 10000
21. 39 9920.37 2256.36 10000; 40 13564.2 1611.98 10000
22. 41 13126.6 1691.77 10000; 42 11756.9 1931.59 10000
23. 43 11756.9 468.415 10000; 44 11135 2041.57 10000; 45 12349.6 1826.77 10000
24. 46 11756.9 778.017 12500; 47 10689.5 2122.75 12500
25. 48 9920.37 2256.36 12500; 49 13564.2 1611.98 12500
26. 50 13126.6 1691.77 12500; 51 11756.9 1931.59 12500
27. 52 11756.9 468.415 12500; 53 11135 2041.57 12500; 54 12349.6 1826.77 12500
28. 55 13123.7 1689.87 7500; 56 10691.7 2119.96 0; 57 13123.7 1689.87 0
29. 58 10691.7 2119.96 2500; 59 13123.7 1689.87 2500; 60 10691.7 2119.96 5000
30. 61 13123.7 1689.87 5000; 62 10691.7 2119.96 7500; 63 10691.7 2119.96 10000
31. 64 13123.7 1689.87 10000; 65 10691.7 2119.96 12500
32. 66 13123.7 1689.87 12500
33. MEMBER INCIDENCES
34. 1 1 56; 2 3 56; 3 5 57; 4 6 7; 5 8 6; 6 9 57; 7 10 58; 8 12 58; 9 14 59
35. 10 15 16; 11 17 15; 12 18 59; 13 19 60; 14 21 60; 15 23 61; 16 24 25; 17 26 24
36. 18 27 61; 19 28 62; 20 30 62; 21 32 55; 22 33 34; 23 35 33; 24 36 55; 25 37 63
37. 26 39 63; 27 41 64; 28 42 43; 29 44 42; 30 45 64; 31 46 65; 32 48 65; 33 50 66
38. 34 51 52; 35 53 51; 36 54 66; 37 55 28; 38 55 31; 39 56 2; 40 56 8; 41 57 1

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 1 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 2

39. 42 57 4; 43 58 11; 44 58 17; 45 59 10; 46 59 13; 47 60 20; 48 60 26; 49 61 19

40. 50 61 22; 51 62 29; 52 62 35; 53 63 38; 54 63 44; 55 64 37; 56 64 40; 57 65 47
41. 58 65 53; 59 66 46; 60 66 49; 61 6 9; 62 15 18; 63 24 27; 64 33 36; 65 42 45
42. 66 51 54
43. START USER TABLE
44. END
45. SUPPORTS
46. 7 16 25 34 43 52 FIXED
47. DEFINE MATERIAL START
48. ISOTROPIC STEEL
49. E 205
50. POISSON 0.3
51. DENSITY 7.68195E08
52. ALPHA 1.2E05
53. DAMP 0.03
54. TYPE STEEL
55. STRENGTH RY 1.5 RT 1.2
56. ISOTROPIC STEEL_355_NMM2
57. E 205
58. POISSON 0.3
59. DENSITY 7.7E08
60. ALPHA 1.2E05
61. DAMP 0.03
62. TYPE STEEL
63. STRENGTH FY 0.355 FU 0.47 RY 1.5 RT 1.2
64. END DEFINE MATERIAL
65. CONSTANTS
66. BETA 180 MEMB 4 10 16 22 28 34
67. MATERIAL STEEL_355_NMM2 ALL
68. MEMBER PROPERTY KINGSPAN
69. 4 10 16 22 28 34 TABLE ST C10005020
70. MEMBER PROPERTY LYSAGHT
71. 1 TO 3 5 TO 9 11 TO 15 17 TO 21 23 TO 27 29 TO 33 35 TO 66 TABLE ST C10015
72. LOAD 1 LOADTYPE NONE TITLE DL
**WARNING THIS STRUCTURE IS DISJOINTED. IGNORE IF
MASTER/SLAVE OR IF UNCONNECTED JOINTS.
73. SELFWEIGHT Y 1
74. JOINT LOAD
75. UNIT METER KN
76. 3 4 12 13 21 22 30 31 39 40 48 49 FY 0.14
77. 8 9 17 18 26 27 35 36 44 45 53 54 FY 0.28
78. UNIT MMS KN
79. LOAD 2 LOADTYPE NONE TITLE WL (X)
80. MEMBER LOAD
81. UNIT METER KN
82. 4 10 16 22 28 34 UNI GX 0.22
83. UNIT MMS KN
84. LOAD 3 LOADTYPE NONE TITLE WL (X)
85. MEMBER LOAD
86. UNIT METER KN
87. 4 10 16 22 28 34 UNI GX 0.22
88. UNIT MMS KN
89. LOAD 4 LOADTYPE NONE TITLE WL (Z)
90. UNIT METER KN

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 2 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 3

91. JOINT LOAD

92. 3 4 12 13 21 22 30 31 39 40 48 49 FY 0.8 FZ 0.14
93. 8 9 17 18 26 27 35 36 44 45 53 54 FY 1.6 FZ 0.28
94. MEMBER LOAD
95. 4 10 16 22 28 34 UNI GZ 0.22
96. UNIT MMS KN
97. LOAD 5 LOADTYPE NONE TITLE WL (Z)
98. UNIT METER KN
99. JOINT LOAD
100. 3 4 12 13 21 22 30 31 39 40 48 49 FY 0.4 FZ 0.06
101. 8 9 17 18 26 27 35 36 44 45 53 54 FY 0.8 FZ 0.12
102. MEMBER LOAD
103. 4 10 16 22 28 34 UNI GZ 0.22
104. UNIT MMS KN
105. LOAD COMB 6 DL + WL (X)
106. 1 1.0 2 1.0
107. LOAD COMB 7 DL + WL (X)
108. 1 1.0 3 1.0
109. LOAD COMB 8 DL + WL (Z)
110. 1 1.0 4 1.0
111. LOAD COMB 9 DL + WL (Z)
112. 1 1.0 5 1.0
113. LOAD COMB 10 0.9DL + WL (X)
114. 1 0.9 2 1.0
115. LOAD COMB 11 0.9DL + WL (X)
116. 1 0.9 3 1.0
117. LOAD COMB 12 0.9DL + WL (Z)
118. 1 0.9 4 1.0
119. LOAD COMB 13 0.9DL + WL (Z)
120. 1 0.9 5 1.0
121. LOAD COMB 14 1.5DL + 1.5 WL (X)
122. 1 1.5 2 1.5
123. LOAD COMB 15 1.5DL + 1.5WL (X)
124. 1 1.5 3 1.5
125. LOAD COMB 16 1.5DL + 1.5WL (Z)
126. 1 1.5 4 1.5
127. LOAD COMB 17 1.5DL + 1.5WL (Z)
128. 1 1.5 5 1.5
129. LOAD COMB 18 0.9DL + 1.2WL (X)
130. 1 0.9 2 1.2
131. LOAD COMB 19 0.9DL + 1.2WL (X)
132. 1 0.9 3 1.2
133. LOAD COMB 20 0.9DL + 1.2WL (Z)
134. 1 0.9 4 1.2
135. LOAD COMB 21 0.9DL + 1.2WL (Z)
136. 1 0.9 5 1.2
137. PERFORM ANALYSIS

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 3 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 4

P R O B L E M S T A T I S T I C S

NUMBER OF JOINTS 66 NUMBER OF MEMBERS 66

NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 6

Using 64bit analysis engine.

SOLVER USED IS THE OUTOFCORE BASIC SOLVER

ORIGINAL/FINAL BANDWIDTH= 56/ 4/ 30 DOF

TOTAL PRIMARY LOAD CASES = 5, TOTAL DEGREES OF FREEDOM = 360
TOTAL LOAD COMBINATION CASES = 16 SO FAR.
SIZE OF STIFFNESS MATRIX = 11 DOUBLE KILOWORDS
REQRD/AVAIL. DISK SPACE = 12.2/ 177144.5 MB

138. PARAMETER 1
139. CODE BS5950 COLD
140. FYLD 0.355 ALL
141. BEAM 1 ALL
142. MAIN 2 ALL
143. TRACK 1 ALL
144. CHECK CODE ALL
STEEL DESIGN

STAAD.Pro MEMBERSELECTION (BS59505 V1.2)

**************************
UNITS ARE: MM, KN, KNM, MPA

||
| MEMBER# 1 SECTION: C10015 LEN: 1713.32 GOV.LOC: 1713.32 |
| STATUS: PASS RATIO = 0.659 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 34.51 |
| BEND. Z: 2.60 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 2 SECTION: C10015 LEN: 783.30 GOV.LOC: 783.30 |
| STATUS: PASS RATIO = 0.435 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.55 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 3 SECTION: C10015 LEN: 3.47 GOV.LOC: 3.47 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 14 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 4 SECTION: C10005020 LEN: 2400.01 GOV.LOC: 2400.01 |
| STATUS: FAIL RATIO = 3.104 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 4 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 5

| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.04 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 6 SECTION: C10015 LEN: 786.11 GOV.LOC: 786.11 |
| STATUS: PASS RATIO = 0.278 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.54 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 7 SECTION: C10015 LEN: 1713.32 GOV.LOC: 1713.32 |
| STATUS: PASS RATIO = 0.659 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 34.51 |
| BEND. Z: 2.60 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 8 SECTION: C10015 LEN: 783.30 GOV.LOC: 783.30 |
| STATUS: PASS RATIO = 0.435 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.55 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 9 SECTION: C10015 LEN: 3.47 GOV.LOC: 3.47 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 14 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 10 SECTION: C10005020 LEN: 2400.01 GOV.LOC: 2400.01 |
| STATUS: FAIL RATIO = 3.104 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 138.39 ECC.TENS: 138.39 COMPRESS: 29.64 |
| BEND. Z: 2.10 BEND. Y: 2.73 SHEAR Z: 34.93 SHEAR Y: 38.77 |
||
| MEMBER# 11 SECTION: C10015 LEN: 631.55 GOV.LOC: 631.55 |
| STATUS: FAIL RATIO = 1.151 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.04 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 12 SECTION: C10015 LEN: 786.11 GOV.LOC: 786.11 |
| STATUS: PASS RATIO = 0.278 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.54 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 13 SECTION: C10015 LEN: 1713.32 GOV.LOC: 1713.32 |
| STATUS: PASS RATIO = 0.659 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 34.51 |
| BEND. Z: 2.60 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 14 SECTION: C10015 LEN: 783.30 GOV.LOC: 783.30 |
| STATUS: PASS RATIO = 0.435 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 5 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 6

| |
| RESISTANCES: AX.TENS: 138.39 ECC.TENS: 138.39 COMPRESS: 29.64 |
| BEND. Z: 2.10 BEND. Y: 2.73 SHEAR Z: 34.93 SHEAR Y: 38.77 |
||
| MEMBER# 17 SECTION: C10015 LEN: 631.55 GOV.LOC: 631.55 |
| STATUS: FAIL RATIO = 1.151 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.04 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 18 SECTION: C10015 LEN: 786.11 GOV.LOC: 786.11 |
| STATUS: PASS RATIO = 0.278 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.54 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 19 SECTION: C10015 LEN: 1713.32 GOV.LOC: 1713.32 |
| STATUS: PASS RATIO = 0.659 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 34.51 |
| BEND. Z: 2.60 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 20 SECTION: C10015 LEN: 783.30 GOV.LOC: 783.30 |
| STATUS: PASS RATIO = 0.435 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.55 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 21 SECTION: C10015 LEN: 3.47 GOV.LOC: 3.47 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 14 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 22 SECTION: C10005020 LEN: 2400.01 GOV.LOC: 2400.01 |
| STATUS: FAIL RATIO = 3.104 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 138.39 ECC.TENS: 138.39 COMPRESS: 29.64 |
| BEND. Z: 2.10 BEND. Y: 2.73 SHEAR Z: 34.93 SHEAR Y: 38.77 |
||
| MEMBER# 23 SECTION: C10015 LEN: 631.55 GOV.LOC: 631.55 |
| STATUS: FAIL RATIO = 1.151 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.04 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 24 SECTION: C10015 LEN: 786.11 GOV.LOC: 786.11 |
| STATUS: PASS RATIO = 0.278 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.54 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 25 SECTION: C10015 LEN: 1713.32 GOV.LOC: 1713.32 |
| STATUS: PASS RATIO = 0.659 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 6 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 7

| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 28 SECTION: C10005020 LEN: 2400.01 GOV.LOC: 2400.01 |
| STATUS: FAIL RATIO = 3.104 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 138.39 ECC.TENS: 138.39 COMPRESS: 29.64 |
| BEND. Z: 2.10 BEND. Y: 2.73 SHEAR Z: 34.93 SHEAR Y: 38.77 |
||
| MEMBER# 29 SECTION: C10015 LEN: 631.55 GOV.LOC: 631.55 |
| STATUS: FAIL RATIO = 1.151 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.04 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 30 SECTION: C10015 LEN: 786.11 GOV.LOC: 786.11 |
| STATUS: PASS RATIO = 0.278 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.54 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 31 SECTION: C10015 LEN: 1713.32 GOV.LOC: 1713.32 |
| STATUS: PASS RATIO = 0.659 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 34.51 |
| BEND. Z: 2.60 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 32 SECTION: C10015 LEN: 783.30 GOV.LOC: 783.30 |
| STATUS: PASS RATIO = 0.435 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 43.55 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 33 SECTION: C10015 LEN: 3.47 GOV.LOC: 3.47 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 14 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 34 SECTION: C10005020 LEN: 2400.01 GOV.LOC: 2400.01 |
| STATUS: FAIL RATIO = 3.104 GOV.MODE: Tension Eccent GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 138.39 ECC.TENS: 138.39 COMPRESS: 29.64 |
| BEND. Z: 2.10 BEND. Y: 2.73 SHEAR Z: 34.93 SHEAR Y: 38.77 |
||
| MEMBER# 35 SECTION: C10015 LEN: 631.55 GOV.LOC: 631.55 |
| STATUS: FAIL RATIO = 1.151 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.04 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 36 SECTION: C10015 LEN: 786.11 GOV.LOC: 786.11 |
| STATUS: PASS RATIO = 0.278 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 7 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 8

| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 39 SECTION: C10015 LEN: 3.55 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 14 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 40 SECTION: C10015 LEN: 450.18 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.292 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 41 SECTION: C10015 LEN: 1643.05 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.488 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 35.63 |
| BEND. Z: 2.69 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 42 SECTION: C10015 LEN: 447.33 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.237 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 43 SECTION: C10015 LEN: 3.55 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 14 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 44 SECTION: C10015 LEN: 450.18 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.292 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 45 SECTION: C10015 LEN: 1643.05 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.488 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 35.63 |
| BEND. Z: 2.69 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 46 SECTION: C10015 LEN: 447.33 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.237 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 47 SECTION: C10015 LEN: 3.55 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 14 |
||
| |

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 8 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 9

| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 35.63 |
| BEND. Z: 2.69 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 50 SECTION: C10015 LEN: 447.33 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.237 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 51 SECTION: C10015 LEN: 3.55 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 52 SECTION: C10015 LEN: 450.18 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.292 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 53 SECTION: C10015 LEN: 3.55 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 14 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 54 SECTION: C10015 LEN: 450.18 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.292 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 55 SECTION: C10015 LEN: 1643.05 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.488 GOV.MODE: Bending Biax GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 35.63 |
| BEND. Z: 2.69 BEND. Y: 1.09 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 56 SECTION: C10015 LEN: 447.33 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.237 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 57 SECTION: C10015 LEN: 3.55 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.000 GOV.MODE: ShearY GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.71 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 58 SECTION: C10015 LEN: 450.18 GOV.LOC: 0.00 |
| STATUS: PASS RATIO = 0.292 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 9 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 10

| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.53 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 61 SECTION: C10015 LEN: 601.90 GOV.LOC: 0.00 |
| STATUS: FAIL RATIO = 1.115 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.13 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 62 SECTION: C10015 LEN: 601.90 GOV.LOC: 0.00 |
| STATUS: FAIL RATIO = 1.115 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.13 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 63 SECTION: C10015 LEN: 601.90 GOV.LOC: 0.00 |
| STATUS: FAIL RATIO = 1.115 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.13 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 64 SECTION: C10015 LEN: 601.90 GOV.LOC: 0.00 |
| STATUS: FAIL RATIO = 1.115 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.13 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 65 SECTION: C10015 LEN: 601.90 GOV.LOC: 0.00 |
| STATUS: FAIL RATIO = 1.115 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.13 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |
||
| MEMBER# 66 SECTION: C10015 LEN: 601.90 GOV.LOC: 0.00 |
| STATUS: FAIL RATIO = 1.115 GOV.MODE: Bend+Compress GOV.LOAD: 16 |
||
| |
| RESISTANCES: AX.TENS: 108.40 ECC.TENS: 108.40 COMPRESS: 44.13 |
| BEND. Z: 3.29 BEND. Y: 2.00 SHEAR Z: 24.28 SHEAR Y: 28.44 |

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 10 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 11

145. STEEL TAKE OFF ALL

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 11 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 12

STEEL TAKE OFF

STEEL TAKEOFF

PROFILE LENGTH(MMS ) WEIGHT(KN )

ST C10015 42382.56 1.053

ST C10005020 14400.03 0.448

TOTAL = 1.501

END OF DATA FROM INTERNAL STORAGE

146. FINISH

* END OF THE STAAD.Pro RUN *

DATE= JUN 16,2023 TIME= 7:23:26

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 12 of 13
Friday, 16 June 2023 07:23

DXF IMPORT OF GMS.DXF PAGE NO. 13

************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://www.bentley.com/en/support/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help>Technical Support *
* *
* Copyright (c) 19972017 Bentley Systems, Inc. *
* http://www.bentley.com *
************************************************************

C:\Users\Sim_O\Desktop\GROUND~1\Structure1.anl Page 13 of 13

LKO STR
No ratings yet
LKO STR
113 pages
Staad Report Wathc Tower
No ratings yet
Staad Report Wathc Tower
35 pages
Staad Report Using NSCP 2015 Load Combo Web Flange GF
No ratings yet
Staad Report Using NSCP 2015 Load Combo Web Flange GF
19 pages
Report of Telecom Tower
No ratings yet
Report of Telecom Tower
16 pages
Structural Analysis - Staad Result
No ratings yet
Structural Analysis - Staad Result
18 pages
Analysis Report
No ratings yet
Analysis Report
80 pages
Staad Space
No ratings yet
Staad Space
12 pages
3px12 (3m) - R2
No ratings yet
3px12 (3m) - R2
32 pages
Staad Output
No ratings yet
Staad Output
393 pages
CDSM 3
No ratings yet
CDSM 3
315 pages
Staad Report Final
No ratings yet
Staad Report Final
62 pages
STAAD Pro Output
No ratings yet
STAAD Pro Output
114 pages
Thursday, August 06, 2020, 02:29 PM: Page 1 of 135 C:/Users/Rose/Desktop/work/Structure1.anl
No ratings yet
Thursday, August 06, 2020, 02:29 PM: Page 1 of 135 C:/Users/Rose/Desktop/work/Structure1.anl
135 pages
First Design
No ratings yet
First Design
148 pages
STAAD.Pro Analysis Report
No ratings yet
STAAD.Pro Analysis Report
62 pages
Staad Analysis
No ratings yet
Staad Analysis
54 pages
Vinay TLP Eb Final Final
No ratings yet
Vinay TLP Eb Final Final
225 pages
Analysis
No ratings yet
Analysis
22 pages
Staad
No ratings yet
Staad
10 pages
Office Complex Structural Design Report
No ratings yet
Office Complex Structural Design Report
44 pages
STAAD ANALYSIS Sample
No ratings yet
STAAD ANALYSIS Sample
137 pages
Monday, May 26, 2025, 03:21 AM
No ratings yet
Monday, May 26, 2025, 03:21 AM
99 pages
Saturday, July 29, 2017, 11:49 Am: Page 1 of 34 C:/Sprov8I Ss6/Staad/Plugins/Warehouse Cml2.Anl
No ratings yet
Saturday, July 29, 2017, 11:49 Am: Page 1 of 34 C:/Sprov8I Ss6/Staad/Plugins/Warehouse Cml2.Anl
34 pages
Final Staad Output
No ratings yet
Final Staad Output
15 pages
Staad
No ratings yet
Staad
57 pages
Structure Analysis
No ratings yet
Structure Analysis
9 pages
WARNING-One or More Lines Are Too Long and Will Be Split Into 2 Lines
No ratings yet
WARNING-One or More Lines Are Too Long and Will Be Split Into 2 Lines
20 pages
Staad
No ratings yet
Staad
18 pages
One-Way Load Warning in STAAD.Pro Analysis
No ratings yet
One-Way Load Warning in STAAD.Pro Analysis
41 pages
Structure Report
No ratings yet
Structure Report
201 pages
OUTPUT
No ratings yet
OUTPUT
298 pages
Thursday, October 24, 2024, 09:16 PM: Page 1 of 136 D:/STRUCTURE/Structure1.anl
No ratings yet
Thursday, October 24, 2024, 09:16 PM: Page 1 of 136 D:/STRUCTURE/Structure1.anl
136 pages
Analysis Report of Modal
No ratings yet
Analysis Report of Modal
139 pages
Tuesday, July 24, 2018, 09:58 PM: Page 1 of 73 C:/Users/Ultimate/Downloads/ganacopy/copygana - Anl
No ratings yet
Tuesday, July 24, 2018, 09:58 PM: Page 1 of 73 C:/Users/Ultimate/Downloads/ganacopy/copygana - Anl
73 pages
1ST Anylyse
No ratings yet
1ST Anylyse
25 pages
2nd Design of RCC
No ratings yet
2nd Design of RCC
168 pages
Output 3
No ratings yet
Output 3
131 pages
2 Storey With Roof Deck Staad Result
No ratings yet
2 Storey With Roof Deck Staad Result
36 pages
Structural Design Load Analysis
No ratings yet
Structural Design Load Analysis
30 pages
Staad Pro Report
No ratings yet
Staad Pro Report
33 pages
RC Ej
No ratings yet
RC Ej
6 pages
Tuesday, July 07, 2020, 02:00 PM
No ratings yet
Tuesday, July 07, 2020, 02:00 PM
50 pages
Additional One (1) Floor To Existing Three (3) - Storey Apartment Building
No ratings yet
Additional One (1) Floor To Existing Three (3) - Storey Apartment Building
216 pages
Decantation Well Analysis Report
No ratings yet
Decantation Well Analysis Report
36 pages
Building Drift Analysis
No ratings yet
Building Drift Analysis
32 pages
Final Report
No ratings yet
Final Report
207 pages
Superstructure
No ratings yet
Superstructure
359 pages
Thursday, October 11, 2018, 11:02 PM: Page 1 of 155 C:/Users/kring/Desktop/steel Design/steel - Anl
No ratings yet
Thursday, October 11, 2018, 11:02 PM: Page 1 of 155 C:/Users/kring/Desktop/steel Design/steel - Anl
155 pages
9.1 Lift - Staad Output
No ratings yet
9.1 Lift - Staad Output
78 pages
Output Staadpro Cikoneng
No ratings yet
Output Staadpro Cikoneng
51 pages
2 Design of Column
No ratings yet
2 Design of Column
17 pages
Structural Analysis Fnal
No ratings yet
Structural Analysis Fnal
46 pages
DESIGN CAL - Merged - POTHIA - 250424
No ratings yet
DESIGN CAL - Merged - POTHIA - 250424
108 pages
House Analysis
No ratings yet
House Analysis
5 pages
2-Story Commercial Building Design
No ratings yet
2-Story Commercial Building Design
3 pages
Calculationsv 2
No ratings yet
Calculationsv 2
61 pages
Truss Design
No ratings yet
Truss Design
127 pages
r0 Building 1 Structural Drawings-Column Layout 3.8x12
No ratings yet
r0 Building 1 Structural Drawings-Column Layout 3.8x12
1 page
Comments Reply 2
No ratings yet
Comments Reply 2
2 pages
Reinfrocement Procedure
No ratings yet
Reinfrocement Procedure
2 pages
TRANS Boq
No ratings yet
TRANS Boq
6 pages
Doc List-Detailed Engineering Review
No ratings yet
Doc List-Detailed Engineering Review
30 pages
WIND PSS-1 Electrical Status
No ratings yet
WIND PSS-1 Electrical Status
13 pages
Airtel Postpaid Payment Receipt - ₹618.39
No ratings yet
Airtel Postpaid Payment Receipt - ₹618.39
1 page
Buy QUEEN ELLIE Women's Fit and Flare Midi Dress
No ratings yet
Buy QUEEN ELLIE Women's Fit and Flare Midi Dress
1 page
Wind Load Calculation ASCE 7 10 1728610674
No ratings yet
Wind Load Calculation ASCE 7 10 1728610674
9 pages
Chiller Chiller Chiller Chiller Chiller: (Only Alternative Span Need To Provided With Leg To Leg Bracing)
No ratings yet
Chiller Chiller Chiller Chiller Chiller: (Only Alternative Span Need To Provided With Leg To Leg Bracing)
1 page
Ga Whitefeild 12mms
No ratings yet
Ga Whitefeild 12mms
5 pages
Airtel Postpaid Bill Payment Receipt
No ratings yet
Airtel Postpaid Bill Payment Receipt
1 page
R2 TANK SLAB DRAWINGl
No ratings yet
R2 TANK SLAB DRAWINGl
1 page
Lifi New Project
No ratings yet
Lifi New Project
40 pages
Construction Blueprint Details
100% (1)
Construction Blueprint Details
2 pages
Saint Gobain False Ceiling Quote
No ratings yet
Saint Gobain False Ceiling Quote
2 pages
GA DRAWING OF SHOT BLAST SHED DRAWING-Layout1
No ratings yet
GA DRAWING OF SHOT BLAST SHED DRAWING-Layout1
1 page
Optimal Reinforcement of RC Columns For Biaxial Bending: Materials and Structures November 2010
No ratings yet
Optimal Reinforcement of RC Columns For Biaxial Bending: Materials and Structures November 2010
13 pages
Geomet ® Coatings
No ratings yet
Geomet ® Coatings
3 pages
406 5727746 9085963 Credit Note
No ratings yet
406 5727746 9085963 Credit Note
1 page
G K Interior Designs & Projects
No ratings yet
G K Interior Designs & Projects
1 page
SL No Description System Details Rate/Sft (RS.) Approx. Arra (SFT) Gypsum False Ceiling Plain Board
No ratings yet
SL No Description System Details Rate/Sft (RS.) Approx. Arra (SFT) Gypsum False Ceiling Plain Board
2 pages
Aerospace Engineering Flight Control Course
No ratings yet
Aerospace Engineering Flight Control Course
56 pages
Classical Mech
No ratings yet
Classical Mech
6 pages
Fundamentals of Structural Theory
No ratings yet
Fundamentals of Structural Theory
1 page
Fracture Mechanics
No ratings yet
Fracture Mechanics
27 pages
(ASCE) GM.1943-5622.0001110 - Amit Kumar Das and Kousik Deb - XXXXX
No ratings yet
(ASCE) GM.1943-5622.0001110 - Amit Kumar Das and Kousik Deb - XXXXX
16 pages
Bolt Frustum Stiffness Analysis
No ratings yet
Bolt Frustum Stiffness Analysis
9 pages
14M512-Dynamics of Machinery
No ratings yet
14M512-Dynamics of Machinery
1 page
Study On The Concentration of Moment at PDF
No ratings yet
Study On The Concentration of Moment at PDF
7 pages
CH 3 2020
No ratings yet
CH 3 2020
62 pages
Cl. 10 - MT-1 - Physics
No ratings yet
Cl. 10 - MT-1 - Physics
2 pages
Topic 5
No ratings yet
Topic 5
29 pages
Retaining Wall Construction Analysis
No ratings yet
Retaining Wall Construction Analysis
6 pages
2.formation of Global Analysis
No ratings yet
2.formation of Global Analysis
8 pages
23.design of Stirrups
No ratings yet
23.design of Stirrups
13 pages
Postal: Mechanical Engineering
No ratings yet
Postal: Mechanical Engineering
3 pages
Flow Resistance: A Design Guide For Engineers
No ratings yet
Flow Resistance: A Design Guide For Engineers
1 page
Flow Past A Cylinder: Created in COMSOL Multiphysics 5.4
No ratings yet
Flow Past A Cylinder: Created in COMSOL Multiphysics 5.4
12 pages
Physical Sciences Common Test QP March 2022 Free State
No ratings yet
Physical Sciences Common Test QP March 2022 Free State
13 pages
EC2 Beam Design
100% (1)
EC2 Beam Design
4 pages
Workshop 6 - High Pressure Grinding Rolls (Wear and Breakage)
0% (1)
Workshop 6 - High Pressure Grinding Rolls (Wear and Breakage)
40 pages
CE Board Exam Mastery Tracker
No ratings yet
CE Board Exam Mastery Tracker
2 pages
Lorenz Number
No ratings yet
Lorenz Number
25 pages
Fundamental Solutions in Elastodynamics A Compendium by E-Ka
No ratings yet
Fundamental Solutions in Elastodynamics A Compendium by E-Ka
262 pages
Understanding LRFD Design Methodologies
No ratings yet
Understanding LRFD Design Methodologies
26 pages
Slider Crank
No ratings yet
Slider Crank
2 pages
General Solutions for Perfect Fluid Cosmology
No ratings yet
General Solutions for Perfect Fluid Cosmology
8 pages
Pump Performance - Double Pumps
No ratings yet
Pump Performance - Double Pumps
8 pages
MM326 System Dynamics Homework 3 Guide
100% (1)
MM326 System Dynamics Homework 3 Guide
3 pages
ESS 454 Hydrogeology: Instructor: Michael Brown Brown@ess - Washington.edu
No ratings yet
ESS 454 Hydrogeology: Instructor: Michael Brown Brown@ess - Washington.edu
14 pages
Hospital Room Ventilation CFD Study
No ratings yet
Hospital Room Ventilation CFD Study
5 pages

Jagannath GMS Design Report - With Current Sections

Uploaded by

Jagannath GMS Design Report - With Current Sections

Uploaded by

Friday, 16 June 2023 07:23

1. STAAD SPACE DXF IMPORT OF GMS.DXF

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 2

39. 42 57 4; 43 58 11; 44 58 17; 45 59 10; 46 59 13; 47 60 20; 48 60 26; 49 61 19

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 3

91. JOINT LOAD

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 4

NUMBER OF JOINTS 66 NUMBER OF MEMBERS 66

Using 64­bit analysis engine.

SOLVER USED IS THE OUT­OF­CORE BASIC SOLVER

ORIGINAL/FINAL BAND­WIDTH= 56/ 4/ 30 DOF

STAAD.Pro MEMBER­SELECTION ­ (BS5950­5 ­V1.2)

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 5

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 6

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 7

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 8

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 9

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 10

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 11

145. STEEL TAKE OFF ALL

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 12

STEEL TAKE OFF

PROFILE LENGTH(MMS ) WEIGHT(KN )

ST C10015 42382.56 1.053

************ END OF DATA FROM INTERNAL STORAGE ************

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= JUN 16,2023 TIME= 7:23:26 ****

DXF IMPORT OF GMS.DXF ­­ PAGE NO. 13

You might also like

DXF IMPORT OF GMS.DXF PAGE NO. 2

DXF IMPORT OF GMS.DXF PAGE NO. 3

DXF IMPORT OF GMS.DXF PAGE NO. 4

Using 64bit analysis engine.

SOLVER USED IS THE OUTOFCORE BASIC SOLVER

ORIGINAL/FINAL BANDWIDTH= 56/ 4/ 30 DOF

STAAD.Pro MEMBERSELECTION (BS59505 V1.2)

DXF IMPORT OF GMS.DXF PAGE NO. 5

DXF IMPORT OF GMS.DXF PAGE NO. 6

DXF IMPORT OF GMS.DXF PAGE NO. 7

DXF IMPORT OF GMS.DXF PAGE NO. 8

DXF IMPORT OF GMS.DXF PAGE NO. 9

DXF IMPORT OF GMS.DXF PAGE NO. 10

DXF IMPORT OF GMS.DXF PAGE NO. 11

DXF IMPORT OF GMS.DXF PAGE NO. 12

END OF DATA FROM INTERNAL STORAGE

* END OF THE STAAD.Pro RUN *

DATE= JUN 16,2023 TIME= 7:23:26

DXF IMPORT OF GMS.DXF PAGE NO. 13