1.

6 GHz Universal Counter

HM8021-4

Frequency range 0 Hz to 1.6 GHz

Mainframe HM8001-2
10 MHz time base with 1 ppm stability (TCXO)

Input A:
Input impedance 1 MΩ, maximum sensitivity 20 mVrms

Input C:
HZ33, HZ34 Input impedance 50 Ω, maximum sensitivity 30 mVrms
Test cable BNC/BNC

Time interval resolution up to 10 ps

Offset mode over the entire measurement range

Gate input (in combination with HO801)

Option HO801
Mainframe HM8001-2 required for operation
 Totalize (manual / external gated)
1.6 GHz Universal Counter HM8021-4 Range: DC to 20 MHz
Min. pulse duration: 25 ns
Valid at 23 °C after a 30 minute warm-up period
LSD: ±1 count
Resolution: LSD
Ext. gate error:
Measurement functions
in manual mode only 100 ns
Frequency A/C, Period A;
Totalize A;
Time interval (averaged)
Pulse width :L / L: (averaged);
LSD: 100 ns to 10 ps
Totalize A during ext. gate
Resolution: 1 or 2 LSD
Input characteristics (Input A)
Offset
Frequency range:
Range: covers the entire measurement range
0 – 150 MHz: DC-coupled
10 Hz – 150 MHz: AC-coupled
Gate time
Sensitivity: (normal triggering)
(Gate time cannot be less than 1 period.)
DC – 80 MHz 20 mVrms (sine wave)
Range: 100 ms – 10 s in 3 steps
80 mV (pulse)
External gate time: min. 150 μs
80 MHz – 150 MHz 60 mVrms (sine wave)
20 Hz – 80 MHz (auto trig.) 50 mVrms (sine wave)
Timebase
Minimum pulse width: 5 ns
Frequency: 10 MHz clock
Input noise: 100 μV (typ.)
10 MHz crystal
Coupling: AC or DC (switchable)
Accuracy (between 10° C and 40° C):
Input impedance: 1 MΩ II 40 pF
±5 x 10-7
Attenuator: x 1, x 20 (switchable)
Aging: ±3 ppm/15 years
Max. input voltage:
0 to 440 Hz: 400 V (DC + ACpeak)
Miscellaneous
1 MHz: decreasing to 8 Vrms
Display: 8-digit 7-segment LED display with
7.65 mm digit height, sign and exponent
Input characteristics (Input C)
Power consumption: approx. 7 Watt
Frequency range: 100 MHz – 1.6 GHz
Operating temperature: +10° C to +40° C
Sensitivity:
Max. relative humidity: 10 % – 90 %
to 1.3 GHz: 30 mV (typ. 20 mV)
(without condensation), 5 % – 95 % RH
to 1.6 GHz: 100 mV (typ. 80 mV)
Dimensions (W x H x D): 135 x 68 x 228 mm
Input impedance: 50 Ω nominal
Weight: approx. 0.6 kg
Coupling: AC
Max. input voltage: 5 V (DC + ACpeak)

Input characteristics (external gate)

Input impedance: 4.7 kΩ
Max. input voltage: ±30 V
High/low level: › 2 V/‹ 0.5 V
Min. pulse duration: 50 ns
Min. effective gate time: 150 μs

Frequency measurement (Input A)

LSD: (2.5x10-7 s x freq.)/measurement time
Resolution: ±1 or 2 LSD
Accessories supplied: Operator’s Manual
Optional accessories:
Period duration measurement
HZ33/HZ34 Test Cable 50 Ω (BNC-BNC)
Range: 10,000 sec to 66.6 ns
HZ24 (Attenuators 50 Ω
LSD: (2.5 x 10-7 s x period)/measurement time
HZ10S/R Silicone test lead
Resolution: ±1 or 2 LSD

w w w. h a m e g . co m
HM8021-4E/180107/ce · Subject to alterations · © HAMEG Instruments GmbH · ® Registered Trademark · DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 800 0 · Fax +49 (0) 6182 800 100 · www.hameg.com · [email protected]
A Rohde & Schwarz Company