Scribd
Upload
805 views5 pages

Job Hazard Analysis for Steel Works

This document analyzes potential job hazards and risks for steel work during the construction of a smart IT building. It identifies hazards such as entrapment from steel cutting blades, noise exposure, and contact with moving parts. It then provides risk control methods to minimize each hazard, such as establishing a no-go zone around blades, wearing hearing protection, and isolating all moving parts. The document serves to assess risk levels and implement safety controls for steel work tasks.

Uploaded by

madellekylenetabinas01
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
805 views5 pages

Job Hazard Analysis for Steel Works

This document analyzes potential job hazards and risks for steel work during the construction of a smart IT building. It identifies hazards such as entrapment from steel cutting blades, noise exposure, and contact with moving parts. It then provides risk control methods to minimize each hazard, such as establishing a no-go zone around blades, wearing hearing protection, and isolating all moving parts. The document serves to assess risk levels and implement safety controls for steel work tasks.

Uploaded by

madellekylenetabinas01
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
  • Job Hazard Analysis & Risk Assessment - Steel Works
  • Job Hazard Analysis & Risk Assessment - Medical Science Lab

Job Hazard Analysis

& Risk Assessment


Project Title: CONSTRUCTION OF SMART IT BUILDING
Location: EASTERN SAMAR STATE UNIVERSITY
Prepared By: MADELLE KYLENE A. TABINAS
Date: OCTOBER 16, 2023

JOB/TASK DESCRIPTION: STEEL WORKS

New risk
Work Method Statement score
Hazard / Risk Risk
No. Job Step Score
For After
Exposure controls
Control of Hazard Exposures
applied
1  Define a “no go” area. Hands MUST be
 Entrapment from contact with
prevented from reaching beneath blades.
blades and bending metal
 Place a distance table to minimize the chance
of reaching to the blade, and to support metal
STEEL
CUTTING while it’s cut.

 Reduce noise levels by isolating machines or


 Noise
enclosing within noise barriers.
 Assess noise levels.
 Arrange hearing screenings.
 Always Wear hearing protection.

 Isolate all hazards, including moving parts of


 Contact, impact or entrapment from
moving parts/unwanted movement the hydraulic ram, and access to any press
working with the shears.
 Keep up-to-date housekeeping procedures.
 Slips, trips and falls
 Keep the area around shears clear of slip and
trip hazards.

 Scrap metal MUST be collected without a


 Contact with scrap metal need to reach into the shears or any related
press.
 Wear eye protection.

4
Job Hazard Analysis
& Risk Assessment
Project Title: CONSTRUCTION OF MEDICAL SCIENCE LABORATORY BUILDING
Location: EASTERN SAMAR STATE UNIVERSITY
Prepared By:
Date:

IF IT’S NOT SAFE – DON’T DO IT THAT WAY!

JOB/TASK DESCRIPTION:

Work Method Statement New risk


Hazard / Risk Risk score
No. Job Step Score
For After
Exposure
Control of Hazard Exposures controls
applied

4
IF IT’S NOT SAFE – DON’T DO IT THAT WAY!

You might also like