1094 N. Kannan, D.

Vakeesan / Renewable and Sustainable Energy Reviews 62 (2016) 1092–1105

industry and its importance for future world to be energy wise

sustainable with little emissions.

2. Fundamentals of photovoltaic technology

This is a technology used to convert sunlight into electricity

directly without any interface for conversion. Therefore, these
devices are very simple in design and for efficient handling [16]. In
addition, they have the ability to give larger outputs from smaller
inputs. Hence, they are used in various applications worldwide.
However, its system is still to be improved for better outputs.
Photovoltaic devices commonly use semiconductor material to
induce electricity, in which silicon is commonly used. The principle
of this device is to activate electrons by giving additional energy.
This device works on the principle that the electrons are activated
from lower energy state to higher energy state as of the energy
addition from sunlight. This activation will in turn create number
of holes and free electrons in the semi-conductor thus giving
electricity [17].
Monocrystalline silicon, polycrystalline silicon, microcrystalline
silicon, copper indium diselenide and cadmium telluride are
commonly used as semiconductors in photovoltaic systems.
Selection of these materials is influenced by number of factors
[18]. PV system consists of many components like cells, module
and arrays for generating power. In addition, various means of
regulating and controlling structures, electronic devices, electrical
Fig. 2. n-Type silicon free electron [163]. connections and mechanical devices are used for better opera-
tional efficiency. PV systems are rated in peak Kilowatts (kWp)
radiation of about 15–20 MJ/m2/day (4.2 to 5.6 kWh/m2/day) [13] which is an amount of electrical power delivered by a PV system
Fig. 2). when the sun is directly overhead in a clear day [19]. Number of
Third, utilization and tracking of solar energy do not have any researches have been carried out in the PV devices to increase
harmful impact on ecosystem in which natural balance is kept their efficiency since long ages ago and it is important to note that
consistent for the betterment of living organisms. Exploitation of it is now said to be a fast growing industry which doubles its
fossil fuel leads to ecosystems damage which in-turn damages production every two years with an average increase of 48% since
natural balance [14]. Forth, solar system can effectively be used for 2002 [20].
village system, industrial operations and homes, since it is easily In addition to PV technology, concentrating solar thermal
affordable and applicable. In addition, world is now in a curry to power (CSP) and concentrating photovoltaic technology (CVT) are
search for solar energy because of rising independence of global used to convert solar energy into electricity [21]. Typical repre-
population on fossil fuel for energy recovery in order to perform sentation of CSP has been indicated in Fig. 3. However, current
various activities. Use of this technology in a proper way would be generated by photovoltaic technology is fed into grid systems for
a best option for future world to avoid unwanted consequences better efficiency. Roughly 90% of current generating capacity from
arising from energy crisis. Many researches are now under taken photovoltaic consists of grid field electrical systems. Grid field
in order to increase efficiency of solar industry for making the insulation is either ground mounted or built on the roof of the
future world productive in terms of energy utilization [15]. It has building to increase the efficiency of light capacity by PV system.
been indicated that such reserves will be running out in 2300 PV system has to be labeled properly to indicate their capacity and
because of increasing energy demand. Its use however has already durability. Usually, their capacity ranges from 10–60 MW [22].
created significant CO2 emission with an increasing trend from Their durability varies according to the maintenance condition and
1980 to 2010 as of increased energy demand, it has been indicated loading. A well-developed PV panel can operate satisfactorily for
in Fig. 7. As indicated in Fig. 8, fuel energy are getting develop up to 10 years at 90% capacity and 25 years at 80% capacity [23]. Its
dramatically. Therefore, there is a need for renewable energy efficiency is not consistent as it is influenced by many
source to meet increasing demand. Solar power has got prominent
mark of development. As of its promising nature to recovery of
energy. It has been reported that solar PV and concentrating solar
panels, and solar heaters have got highest annual growth rate in
2013 compared to other renewable energy sources as indicated in
Fig. 9. Among the solar technologies solar PV got highest growth
rate in 2013. Ever recorded since vast development took place in
solar cell manufacturing.
Therefore, this paper trends to bring overall fundamental view
of solar energy for future world with logical justification. Photo-
voltaic technology, world's energy scenario, remarkable research
highlights of solar PV industry, application of solar energy and
barriers to such industry have been discussed systematically.
Readers of this paper can simply develop clear picture on solar Fig. 3. Concentrating solar thermal power [164].
 N. Kannan, D. Vakeesan / Renewable and Sustainable Energy Reviews 62 (2016) 1092–1105 1095

environmental factors, particularly by sunlight intensity. There-

fore, many research sub roots have been investigated to obtain
consistent energy supply with no failure.

2.1. Techniques for increasing the efficiency of PV panels

PV systems are sometimes inefficient to capture all available

energy because of fluctuating solar flux. Solar tracking is the concept
commonly used to increase the capture of available solar energy [24].
Solar tracking can be implemented by using one axis and two axis sun
tracking systems. Tracker is a device that keeps PV photo thermal
panels in an optimum position perpendicular to solar radiation during
daylight hours; increases collected energy [25]. Trackers need not Fig. 5. World population status [32].
point directly at sun to be effective. If aim is off by 10°, the output is
still 98.5% of that at full tracking maximum. Abdullah et al. designed 3. World's energy scenario, driving forces and developmental
and constructed a two-axes, open loop PLC controlled sun tracking trends
system. They concluded that the use of two-axes tracking surfaces
results in an increase in total daily collection of about 41.34% as World energy demand is significantly increasing. Fig. 4 shows
compared to that of a fixed one [26]. Solar concentration is combined the total energy consumption in Quadrillion Btu worldwide
with solar trackers to grid PV panels according to the motion of solar around 520 Quadrillion Btu has been consumed by the year 2011
[31]. The main reason for this is population growth as indicated in
to receive considerable sun's energy than fixed PV panels. Parabolic
Fig. 5 explains around 7282.46 million people are living in the
trough solar thermal systems belong to CSP system, which is com-
2014 [32]. Many sources are used to meet such energy demand
monly available. This system has parabolic, trough shaped mirrors to
worldwide. Fig. 6 clearly explains various sources used for gen-
focus sunlight on tubes which are thermally efficient and set to erating electricity for meeting world electricity demands. How-
receive concentrated sunlight. These tubes contain a heat transfer ever, around 77.9% of electricity has been generated by fossil fuel
fluid which it heated to 734°F and pumped through series of heat and nuclear sources which are expensive and causing environ-
exchanges to generate super-heated steam to power turbine gen- mental pollution particularly through CO2 generation, and around
erators to produce electricity [23]. 0.7% has been met by solar PV [33]. Therefore, there is a huge gap
In contrast to concentrating technology, solar collectors, like flat for the development of PV industry to use freely available solar
plate and evacuated tube, have been developed for heating and energy for better future. World is getting polluted and it causes
cooling purposes in a non-concentrated manner [27]. This technique damage to the living things. Fig. 7 shows that total CO2 emissions
has become popular within short time because of its efficiency and from the consumption of energy. Around 32723 million metric
cost effectiveness [28]. It can be used in areas where weather con- tons of CO2 has been generated in the year 2012 [31]. This gen-
eration is very heavy and leading to several environmental issues
ditions are poor and solar intensity is low [29]. This system has three
such as climate change and global warming which lead to ice
mechanisms such as light absorption, transforming and storage.
melting and sea level rise. Because of environmental pollution and
Copper tubes with insulation are used to absorb solar energy, where
exhaustion of fossil fuel resources, world has to stimulate the
water or air is circulated and heated up before returning to storage growth of renewable energy sources for better production. Fig. 8
system. An efficient modification of this system is evacuated tube shows the world fossil fuel energy status. It is clear from the Fig. 8
collector where heat pipes are vacuum shield and 20–45% more that the energy sources will no more be available after the year
efficient than flat plate collectors [30]. 2300 [34]. Hence, many steps are now being taken to increase the
Hybrid power systems are sometimes used in areas where PV use of renewable sources. Fig. 9 shows the annual average growth
panels do struggle to generate consistent electricity for con- rate of renewable energy capacity worldwide [33]. Significant
sumption. PV systems are combined with other forms of electricity increase, around 39%, has been recorded for solar PV in the year
generation, usually a diesel powered generator or even hydro 2013, which clearly shows its promising trends towards fulfilling
turbine or wind turbine for the reduction of fossil fuel use and world's energy need. Photovoltaic technology is developing very
consistent electricity supply [19]. fast to generate more electricity for satisfying needs of people.
Fig. 10 shows trends in solar electricity net generation. Significant
increase has been taken place after the year 2007, as of the
incorporation of new technologies such as traction, focusing and
evacuated tube collectors [31].
In addition, solar thermal industry is also growing significantly.
Various collectors are used to capture sunlight to generate heat
with minimum loss. Fig. 11 shows the global capacity of solar
water heating collectors worldwide. Around 326 GW – thermal
energy has been produced by solar collectors in the year 2013 [33].
The largest installation of solar heating system occurred in China
and Europe [35,36]. Brazil, by 2015, also plans to install roughly
1000 MW of solar heating system to reduce the use of fossil fuel
sources for energy recovery [35]. Solar cell manufacturing was a
problem due to its high cost in the past. Many researchers have
been carried out to reduce such manufacturing cost for the
Fig. 4. Total primary energy consumption (Quadrillion Btu) [31]. development of better PV systems. Fig. 12 shows the price history