Scribd
Upload
225 views2 pages

CNG Pressure Regulator NG1 Specifications

The NG1 is a single-stage CNG pressure regulator with a membrane, heat exchanger, filter, solenoid valve and safety valve. It reduces high pressure CNG to 2 bar for vehicle use. It has fittings for gas inlet/outlet, pressure adjustment, heating circuit, and mounting points. Maintenance includes checking pressure every 20,000 km and replacing membranes and gaskets every 80,000 km, along with filter changes. It is approved under regulations E13 110R-000098, E3 110R-006072 and E3 10R-036366.

Uploaded by

Manikandan SWMS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
225 views2 pages

CNG Pressure Regulator NG1 Specifications

The NG1 is a single-stage CNG pressure regulator with a membrane, heat exchanger, filter, solenoid valve and safety valve. It reduces high pressure CNG to 2 bar for vehicle use. It has fittings for gas inlet/outlet, pressure adjustment, heating circuit, and mounting points. Maintenance includes checking pressure every 20,000 km and replacing membranes and gaskets every 80,000 km, along with filter changes. It is approved under regulations E13 110R-000098, E3 110R-006072 and E3 10R-036366.

Uploaded by

Manikandan SWMS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CNG PRESSURE REGULATOR

NG1

FEATURES
The NG1 is a single-stage compensated membrane reducer with a water/gas heat exchanger, filter, high pressure gas solenoid
valve and safety valve. Calibrated for a delivery pressure of 2 bar (200 kPa) higher than the pressure present in the aspiration
ducts.

VERSIONS
G D G
E1 D
pressure sensor

E2
pressure gauge

G
NG1-2 with

C
NG1-2 with

B C
B
G
H
A I G

F F A
A. Gas inlet connector E2. Pressure sensor with level indicator
B. Gas outlet connector F. High Pressure Valve
C. Depression / compensation fitting pressure manifolds G. Fittings reducer heating circuit
D. Pressure Adjustment H. Fixing points pressure regulator
E1. Manometer I. Safety valve

MAINTENANCE
Control of the pressure regulator pressure at 20.000 km
Control tightness of the gas line connectors and heating at 20.000 km
Revision of the pressure regulator (replacement of membranes and gaskets) at 80.000 km
Gas filter (high pressure) at 80.000 km

HOMOLOGATIONS
E13 110R-000098
E3 110R-006072
E3 10R-036366
CNG PRESSURE REGULATOR

TECHNICAL SPECIFICATIONS

VERSION NG1

Type single-stage membrane


Dimension 196x143x104 mm
Weight 1,7 kg
Operation Nominal flow 29kg/h CNG
Operating temperature -40°C / 120°C
Safety valve calibration pressure 3,2/4 bar
Work pressure Relative 2 bar
EV electric coil Features 12 V - 20 W
Supply voltage 12 V (8 ÷ 16 V)
Gas inlet connector Ø 6 mm
Gas outlet connector Ø 14 mm
Heating liquid Fittings Ø 10 mm
Connectors vacuum / pressure Ø 5 mm

You might also like