Workshop Inspection Checklist
Area of Inspection Date of Inspection
Inspection Team
Introduction
Inspection is considered an organised visual check. Please use the inspection check-list to direct your inspection. We advise you walk around the workshop
space, with the checklist, completing it as you go. It is often valuable to include others in your inspection, such as workshop workers and supervisors.
How to use the checklist
The checklist is broken down into various areas, where an area is not applicable, please indicate so. Each item can be rated A - F. Please refer to the table
below to see the definitions for each score.
University inspection ratings explained:
Blue Exemplary No issues raised, ‘best practice’ observed
Green Very Good No Issues raised
Issues raised, technical issues – not
Green/Amber Generally Good
serious
Amber Areas for Improvement Issues raised, areas for improvement
E Red/Amber Unsatisfactory
Serious issue(s) raised, no immediate risk
of harm/damage
Issue(s) of imminent danger, immediate
Red Unacceptable rectification required or suspension of
use of facility/equipment/procedure
Workshop Inspection Checklist
Assigning actions
Where improvements are needed then an action should be assigned and documented using the attached Findings Action Log. Best practice observations
should be shared with others as a method of continuous improvement. Generally speaking, each action should be assigned to a named person and a date for
action agreed.
The log should be used when:
All ratings D - F must have an assigned action
All ‘F’ ratings must be immediately notified to the H&S department and/or the Director of H&S.
Exemplary practice (A) should also be noted and communicated to those involved.
What next?
Reports should be finalised and issued to the workshop manager. Once reports are agreed these should be sent to your School/Department local H&S
Committee for note.
Item Observation Non-conformance Provide Recommended Corrective Individual Date
details Action responsible for Completed
ensuring corrective
action is underway
1. EQUIPMENT SAFETY
1.1 s floor space clear of Yes
objects/debris? No
1.2 Are safe work method Yes
statements/warning signs No
clearly visible?
1.3 Are machines adequately Yes
guarded/ protected to prevent No
contact, entanglement or
damage?
1.4 Are the Personal Protective Yes
Equipment (PPE) requirements No
for the workshop clearly
displayed?
Workshop Inspection Checklist
Item Response Non-conformance Provide Recommended Corrective Individual Date
details Action responsible for Completed
ensuring corrective
action is underway
1.5 Are the PPE requirements Yes
followed? No
1.6 Are lighting levels Yes
satisfactory for operators to No
utilise equipment safely?
1.7 Is the plant and equipment Yes
located in an appropriate No
location within the workshop?
(i.e. explosion proof etc.)
1.8 Does the workshop floor Yes
have clearly outlined safe No
walkways?
1.9 Is there a preventative Yes
maintenance program in place No
for plant and equipment in the
workshop?
1.10 Are there records of Yes
maintenance to plant No
and equipment?
1.11 Are Residual Current Yes
Devices in use for portable No
electrical equipment, if N/A
appropriate?
1.12 Are there any sources of Yes
excessive noise in the No
immediate work area or from
an external source?
1.13 Are people appropriately Yes
trained in plant and equipment? No
2
Workshop Inspection Checklist
Item Response Non-conformance Provide Recommended Corrective Individual Date
details Action responsible for Completed
ensuring corrective
action is underway
1.14 Are records of training Yes
held for appropriately No
trained people?
2. EMERGENCY RESPONSE
2.1 Are all access and egress Yes
points clear of obstructions? No
2.2 Is emergency exit signage Yes
adequate and functioning No
correctly?
2.3 Are appropriate fire Yes
extinguishers visible and No
clear of obstructions?
2.4 Have fire extinguishers/ Yes
equipment been serviced in last No
6 months?
2.5 Is the Emergency Yes
Evacuation procedure clearly No
displayed?
2.6 Have designated building Yes
wardens been identified? No
2.7 Are First Aid Kits readily Yes
accessible? No
2.8 Are there First Aid Yes
personnel identified? No
3. CHEMICAL SAFETY
3.1 Is there a Hazardous Yes
Substance register for the No
workshop?
3
Workshop Inspection Checklist
Item Response Non-conformance Provide Recommended Corrective Individual Date
details Action responsible for Completed
ensuring corrective
action is underway
3.2 Is the MSDS or other Yes
safety information available for No
all chemicals?
3.3 Are chemicals labelled Yes
appropriately? No
3.4 Are poisons or other drugs Yes
kept in locked storage? No
3.5 Are chemicals stored Yes
correctly (i.e. only with other No
compatible chemicals)?
3.6 Is all shelving compatible Yes
with chemicals stored? No
3.7 Is there not more than Yes
one flammable liquid cabinet No
per 250m2 of floor space? N/A
3.8 Are flammable liquid Yes
cabinets at least 3m away from No
any potential ignition source? N/A
3.9 Are all storage refrigerators Yes
spark proof? No
N/A
3.10 Is there security-restricted Yes
access to store areas? No
3.11 Is there appropriate Yes
secondary containment to No
prevent spread of major spills? N/A
4
Workshop Inspection Checklist
Item Response Non-conformance Provide Recommended Corrective Individual Date
details Action responsible for Completed
ensuring corrective
action is underway
3.12 Is personal protective Yes
equipment available for use? No
3.13 Are spill cleanup kits and Yes
decontamination material No
available where needed?
3.14 Are there approved Yes
methods for disposal of all No
chemicals in the workshop?
3.15 Are staff and students Yes
aware of procedures in No
place for use of chemicals in
the workshop?
3.16 Are gas cylinders in the Yes
store segregated by Dangerous No
Goods class, with correct
separation distances?
3.17 Are all gas cylinders Yes
securely chained and the No
valves safe?
3.18 Are specialised trolleys Yes
available for moving gas No
cylinders?
3.19 Are all cylinders at least Yes
3m away from potential ignition No
sources?
3.20 Are gas cylinders Yes
stored appropriately within No
the workshop?
5
Workshop Inspection Checklist
Item Response Non-conformance Provide Recommended Corrective Individual Date
details Action responsible for Completed
ensuring corrective
action is underway
4. WELDING SAFETY
4.1 Are staff appropriately Yes
trained in performing welding No
tasks?
4.2 Are students appropriately Yes
supervised by a competent No
person when welding? N/A
4.3 Are welding operators Yes
provided with the appropriate No
PPE for the task?
4.4 Is there adequate Yes
ventilation for welding tasks? No
4.5 Are there appropriate Yes
warning signs in welding No
areas?
4.6 Are welding screens Yes
used when performing No
welding tasks?
5. GENERAL SAFETY
5.1 Are dust/ventilation systems Yes
working adequately? No
5.2 Are electrical appliances Yes
correctly tagged? No
5.3 Are floors and Yes
passageways clear of electrical No
leads?
6
Workshop Inspection Checklist
Other comments:
