Scribd
Upload
85 views4 pages

Heat Recovery Units

This document describes fresh air handling units with heat recovery (VAM units). The units are designed to save energy by recovering heat from exhaust air to warm intake air. They range in capacity from 500-5000 cubic meters per hour. The units have compact, sandwich panel construction for easy ceiling installation. They include double suction fans, optional electric or hot water heating, and a control panel to operate the unit and heating. A table provides specifications on 10 models including air flow rates, motor ratings, voltages, and dimensions.

Uploaded by

Saber Entz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views4 pages

Heat Recovery Units

This document describes fresh air handling units with heat recovery (VAM units). The units are designed to save energy by recovering heat from exhaust air to warm intake air. They range in capacity from 500-5000 cubic meters per hour. The units have compact, sandwich panel construction for easy ceiling installation. They include double suction fans, optional electric or hot water heating, and a control panel to operate the unit and heating. A table provides specifications on 10 models including air flow rates, motor ratings, voltages, and dimensions.

Uploaded by

Saber Entz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

44

FRESH AIR HANDLING UNITS


WITH HEAT RECOVERY
(VAM UNITS)

45
FRESH AIR HANDLING UNIT WITH HEAT RECOVERY

FRESH AIR HANDLING UNIT


WITH HEAT RECOVERY
AHRV - - TD type heat recovery units are
designed for saving energy at locations
where need for fresh air flow is high. The
unit improves the quality of ambient air
as well.
˾Easy installation in false ceiling due
to compact structure and minimal
dimensions
˾Standard capacities ranges between
500 - 5000 m3/h. Optional custom
products are available for higher
capacities.
˾Sandwich type panels are composed
of single layer galvanized steel of
which outer surface is coated with
electrostatic powder paint. Heat
and sound isolation is provided by
10 mm rubber sealing covering the
inner surface or optionally by 30mm
polyurethane fill .
˾High air flow rates and pressures are
met by statically and dynamically
balanced double suction fans which
are either self-driven or optionally
with a belt-pulley drive.
˾Heat recovery coils can be optionally
either with aluminium fins or polymer
based fins.
˾The efficiency of the heat recovery can
reach to levels up to 70% depending
on the temperatures of ambient air
and fresh air.
˾Electric or hot water heating option
is possible in case the temperature of
fresh air is low.
˾A control panel is provided at the
location, using which the unit can be
turned on and off, fan speed can be
adjusted and duct type heaters can be
controlled

46
DUCT TYPE HEAT RECOVERY UNIT (FAN WITH SELF DRIVE)

MODEL AHRV-TD 71 AHRV-TD 72 AHRV-TD 73 AHRV-TD 91 AHRV-TD 92 AHRV-TD 101 AHRV-TD 102 AHRV-TD 103 AHRV-TD 104
AIR FLOW RATE m³/h 500 1,000 1,500 2,000 2,500 3,000 4,000 4,500 5,000
STATIC PRESSURE Pa 100 150 150 150 150 150 150 150 150
CAPACITY
MOTOR RATING kW 0,15 x 2 0,375 x 2 0,375 x 2 0,375 x 2 0,5 x 2 0,5 x 2 0,75 x 2 1,5 x 2 1,5 x 2
VOLTAGE V 230 230 230 230 230 230 230 400 400
LENGTH (L) mm 1,110 1,310 1,310 1,310 1,310 1,410 1,510 2,200 2,200
DIMENSIONS HEIGHT (H) mm 360 440 440 440 490 490 640 680 680
WIDTH (W) mm 770 870 870 1,050 1,210 1,310 1,410 1,500 1,500

47
Capacity and Dimensions Table

You might also like