Breezway Altair Design Manual Malaysia 12122023
Breezway Altair Design Manual Malaysia 12122023
DESIGN MANUAL
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
23
23
Product Performance Warranty: Easyscreen™ Window Systems� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1 Apptivate™ Control Unit Standard Wiring � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25
Product Performance Warranty: Slimline™ Window Systems� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1 Building Management System Compatibility � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25
Product Performance Warranty: ios™ Window Systems (Available in Philippines Only)� � � � � � � � � � � � � � � � � � 2 Cabling Requirements � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 26
Product Performance Warranty: Altair® Component System � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3 Easyscreen™ Powerlouvre™ Window Sizes � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27
Warranty� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 Altair® Louvre Window System Checklist � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27
Care And Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 Altair® Louvre Window System Recommended Specifications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 28
Selecting The Right Aluminium Finish � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Energy Efficiency
Airborne Sound Isolation
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
6
6
Altair ® Stronghold ™ System
Altair® Louvres Description and Functions� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7 Altair® Louvres with the Stronghold™ System � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29
Altair® Louvre Systems � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7 Blade Type Compatibility � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30
Altair® Louvre Gallery Features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8 PowerlouvreTM System Compatibility � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30
Off Standard Louvre Gallery Heights (Extended Channel) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8 Maintenance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30
Handles � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9 Compliance With Balustrading Requirements � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30
Altair® 152mm Louvre Standard Handle Positions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10 Window Sizes� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30
Altair® 102mm Louvre Standard Handle Positions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11 Altair® Stronghold System Recommended Specifications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 31
Extruded Aluminium Blades � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Product Performance Warranty: Easyscreen™ Window Systems Product Performance Warranty: Slimline™ Window Systems
Wind Speed Wind Speed Wind Speed Wind Speed Wind Speed Wind Speed
Design¹ Ultimate² Design¹ Ultimate² Design¹ Ultimate² Design¹ Ultimate² Design¹ Ultimate² Design¹ Ultimate²
1000Pa 1500Pa 1500Pa 2300Pa 2200Pa 3000Pa 1000Pa 1500Pa 1500Pa 2300Pa 2200Pa 3000Pa
41m/sec 50m/sec 50m/sec 61m/sec 60m/sec 70m/sec 41m/sec 50m/sec 50m/sec 61m/sec 60m/sec 70m/sec
146km/h 180km/h 180km/h 222km/h 218km/h 254 km/h 146km/h 180km/h 180km/h 222km/h 218km/h 254 km/h
91mph 111mph 111mph 138mph 135mph 158mph 91mph 111mph 111mph 138mph 135mph 158mph
200Pa Water Pass 200Pa Water Pass 300Pa Water Pass 150Pa Water Pass 200Pa Water Pass 200Pa Water Pass
Easyscreen Louvre Window System Single Bay Slimline Louvre Window System Single Bay
152mm Altair Louvre 900 3031 750 3031 600 2471 152mm Altair Louvre 900 3005 750 3005 600 2445
102mm Altair Louvre 750 3061 750 3061 600 2521
102mm Altair Louvre 750 3035 750 3035 600 2495
Easyscreen Louvre Window System with the Stronghold System4 (Malaysia Only)
Slimline Window System Multiple Bays (maximum bay widths as per single bay windows)
152mm Toughened Glass 1127 2191 1127 2191 - -
Medium Duty (38 x 25) Mullion - 1430 - 1320 - 1250
Easyscreen Louvre Window System Multiple Bays (maximum bay widths as per single bay windows)
Slimline Louvre Window System Multiple Windows (coupled head-to-sill)*
Easyscreen Mullion - 3061 - 3061 - 2521
Easyscreen Louvre Window System Multiple Windows (coupled head-to-sill)* Slimline Coupler - 1451 - 1340 - 1261
The above tables outline the maximum variations that Breezway will warrant per wind pressure. Exceeding these constraints will void this Warranty. The limitations have been generated through Australian
Standard AS2047 test results generated in a National Association of Testing Authorities (NATA) approved testing laboratory and over 60 years of experience manufacturing louvre windows. The design
constraints below only apply to product sold as a fully assembled Louvre Window System with Altair® Aluminium Blades or glass blades to Breezway's specifications that is maintained according to the
Breezway "Louvre Care and Maintenance" instructions.
For commercial applications, please consult Breezway with your specific project requirements.
1. Design Wind Speed = Serviceability Limit State Wind Pressure of the window. Subjecting the window to wind pressures in 4. Using the Stronghold System for 152mm blade lengths greater
/ Design Wind Pressure / Permissible Stress. The ability of the excess of the Ultimate Wind Speed is likely to result in the than 900mm The Stronghold System is an optional feature of the
window to perform the intended function under normal service window collapsing. Altair Louvre Window which mechanically fixes the blades into the
conditions avoiding excessive deflection or the appearance of clips. These mechanical fixings enable bay widths of up to 1200mm
buckling. 3. Maximum blade lengths apply regardless of whether to be achieved in some regions. In other regions, the ULS and Water
annealed glass, toughened glass or aluminium blades are Pass requirements of AS2047-2014 prevent these wider bay widths
2. Ultimate Wind Speed = Ultimate Limit State Wind Pressure / used. Glass blades must be 6mm thick and straight and flat from being warranted. Easyscreen, or Altair Component System
Ultimate Strength Pressure. The maximum load carrying resistance within 0.35mm/m. High Profile Sills and standard heights are required.
The following table outlines the maximum variations that Breezway will warrant per wind pressure. Exceeding these constraints will void this Warranty.
The limitations have been generated through Australian Standard AS2047 test results generated in a National Association of Testing Authorities (NATA) approved testing laboratory and over 60 years of experience
manufacturing louvre windows.
The design constraints below only apply to product sold as a fully assembled Louvre Window System with Altair® Aluminium Blades, Altair Timber Blades or glass blades to Breezway's specifications that is
maintained according to the Breezway "Louvre Care and Maintenance" instructions.
For commercial applications, please consult Breezway with your specific project requirements.
Max Blade Max Window Max Blade Max Window Max Blade Max Window
Length³ Height Length³ Height Length³ Height
ios Louvre Window System Multiple Bays (maximum bay widths as per single bay windows)
1. Design Wind Speed = Serviceability Limit State Wind Pressure 2. Ultimate Wind Speed = Ultimate Limit State Wind Pressure / 3. Maximum blade lengths apply regardless of
/ Design Wind Pressure / Permissible Stress. The ability of the Ultimate Strength Pressure. The maximum load carrying resistance whether annealed glass, toughened glass, aluminium
window to perform the intended function under normal service of the window. Subjecting the window to wind pressures in or timber blades are used. Glass blades must be
conditions avoiding excessive deflection or the appearance of excess of the Ultimate Wind Speed is likely to result in the window 6mm thick and straight and flat within 0.35mm/m.
buckling. collapsing.
The following table outlines the maximum variations that Breezway will warrant per wind pressure. Exceeding these constraints will void this Warranty. The limitations have been generated through Australian
Standard AS2047 test results generated in a National Association of Testing Authorities (NATA) approved testing laboratory and over 60 years of experience manufacturing louvre windows. The design constraints
below only apply to Altair Component Systems with Altair Aluminium Blades or glass blades to Breezway's specifications that are maintained according to the Breezway "Louvre Care and Maintenance"
instructions.
Max Blade Max Louvre Max Blade Max Louvre Max Blade Max Louvre
Length³ Height Length³ Height Length³ Height
1. Design Wind Speed = Serviceability Limit State Wind Pressure / 3. Maximum blade lengths apply regardless of whether annealed widths from being warranted. Easyscreen, or Altair Component
Design Wind Pressure / Permissible Stress. The ability of the window glass, toughened glass or aluminium blades are used. Glass blades System High Profile Sills and standard heights are required.
to perform the intended function under normal service conditions must be 6mm thick and straight and flat within 0.35mm/m.
avoiding excessive deflection or the appearance of buckling. 5. Heavy Duty Mullions are not available with the Altair
4. Using the Stronghold System for 152mm blade lengths greater Component System. Heavy Duty Mullions can only be used
2. Ultimate Wind Speed = Ultimate Limit State Wind Pressure / than 900mm The Stronghold System is an optional feature of the within Breezway Window Systems.
Ultimate Strength Pressure. The maximum load carrying resistance Altair Louvre Window which mechanically fixes the blades into the
of the window. Subjecting the window to wind pressures in excess of clips. These mechanical fixings enable bay widths of up to 1200mm 6. The Altair Component System Product Performance Warranty
the Ultimate Wind Speed is likely to result in the window collapsing. to be achieved in some regions. In other regions, the ULS and is applicable only when Breezway Altair Weatherstrips are
Water Pass requirements of AS2047-2014 prevent these wider bay used and the system is installed in accordance with Breezway
recommended installation procedures.
Your Louvre windows from Breezway are warranted against defects arising from faulty
workmanship or materials for up to seven (7) years from the date of receipt of goods, Maintaining Aluminium Finishes
provided the following conditions are met. Regular maintenance of the surface finish will be necessary to reduce the rate of weathering.
The frequency of cleaning will depend on the environmental conditions, but as a guide should be
done at 3 monthly intervals, or more frequently in aggressive coastal or industrial environments.
a. The product is installed in accordance with the manufacturer’s Product Performance • Remove loose deposits by gently brushing or hosing.
Warranty, written installation specification and with all relevant Standards. • Clean using a sponge or soft brush and warm water with a mild detergent. Avoid cleaning
b. The product has been maintained according to Breezway and industry agents with a caustic base, abrasive materials or harsh chemicals.
recommendations. • Rinse with clean water.
• Dry with a chamois (optional).
c. The product has not been subject to misuse, physical abuse or neglect. • Apply a 'non-abrasive' car polish to maintain the lustre of the finish (optional).
d. Manufacturing standards and tolerances are not deemed defects, nor are industry
variations in colour of aluminium, plastic and timber componentry.
Glass Maintenance
e. Breezway accepts no responsibility for glass breakage (except for faulty workmanship or For best results glass blades should be regularly cleaned with mild, non-abrasive detergents.
materials), toughened and float glass is guaranteed against defects and degradation for Low e glass blades should be installed with the coated side facing to the inside of the building
three (3) years (if supplied by Breezway). and should only be cleaned with mild, non-abrasive detergents. Abrasive detergents or cleaning
f. Moving parts, which wear out as part of normal use, are guaranteed for seven (7) years. tools will visibly damage the low e coating.
All electrical components are guaranteed for three (3) years.
g. This Guarantee is limited to the repair or replacement of the faulty product at the
Louvre Maintenance
It is recommended that inspection be carried out at the time of installation and then at yearly
company’s discretion, but does not extend to the installation or refinishing of a
intervals. This may be required more frequently depending upon the variation of location, and
replacement product.
environmental conditions.
h. Only repairs carried out by Breezway personnel or authorised agents are covered by this
Guarantee. Inspection and checks
i. Claims under this Guarantee should be made within one month of the defect arising in • Inspect all fittings and screw fixings for firmness.
the product. Copies of documentation showing the purchase date of the product should • Where handle connectors are used, inspect all pivot points of linkages, connecting links,
be included with your written claim and forwarded to the nearest Breezway office. pins and split pins and/or clips for wear and secure fixings.
• Ensure that all Stronghold System pins (if present) are firmly clicked in place.
The Guarantee is in addition to all other rights and remedies in respect of this product to • Check the louvre clips for any degradation over time.
which you are entitled under the local laws. • Check that the blade is firmly and safely positioned in the clips.
• Ensure all louvre blades operate freely.
• Ensure that seals are in place and clean.
• The Powerlouvre® Window should be operated at least once per month.
Lubrication
All internal louvre operating mechanisms are pre-lubricated, prior to assembly, with a clear
lubricant where required. Under normal conditions this will be satisfactory for the life of the
window.
Plastic Maintenance
When cleaning plastic components it is recommended to be done by wetting a cloth with a neutral
cleaning agent such as a car wash without wax/polymer, or alternatively a mild furniture polish.
Acidic or alkaline cleaning solutions, such as vinegar, detergents and glass cleaners should be
avoided.
The aluminium components of Altair® Louvre windows are available in two different surface finishes: anodised or standard powder coating.
Powder coatings are polyester coatings from leading powder suppliers applied to a thickness of 50-80 µm and anodised finishes are to a thickness of 25 µm.
Over time, weathering of powder coated surfaces should be expected, resulting in a gradual change in appearance. This will be evident in loss of gloss, chalking, colour change and erosion of the powder
coatings.
Selecting the right finish for the atmospheric conditions of the site and correct maintenance will be critical to the ongoing appearance of the finish.
Note that industry accepted colour variation can occur during the aluminium anodising process.
Energy Efficiency
Breezway Altair® Louvre Windows can help to enhance the energy efficiency and comfort of a building by offering:
Maximum ventilation
With no fixed panes and blades that open almost fully horizontally (88º) Altair Louvre Windows welcome fresh, cooling breezes. These cooling breezes reduce the need for power hungry electric air conditioning
systems, thereby helping to save our fragile environment.
Tight Sealing
Altair Louvre Windows have an air infiltration rating that is significantly better than the standard required for residential windows. Tight sealing reduces draughts thereby allowing heating and cooling systems to run
more efficiently.
Choice of Glazing
A variety of energy efficient glazing options can be used to meet local requirements. For example, toned glass blades reduce the amount of hot sunlight that enters a building and the improved insulating properties
of low e glass blades offer thermal performance comparable to clear double glazing.
Energy ratings of most windows sold in Australia can be found in the Window Energy Rating Scheme (WERS) website, www.wers.net. In Southeast Asia's warm, tropical climate the shading offered by tinted glass or
aluminium blades will reduce the solar heat gain through those windows thereby reducing the temperatures within a building. Clear low e glass can similarly reduce the solar heat gain when clear glass is preferred.
Low e glass blades offer insulating properties similar to those achieved by windows with clear double glazing.
Sound
Size Transmission Blade Material
Loss
The Altair Louvre window system has been field tested for sound transmission loss.
The tests were conducted independently by a member firm of the Association of the Australia Acoustical Consultants.
The tests were carried out on Altair windows 2400 high x 840 wide. The windows comprised of a Breezway Louvre Windows aluminium surround frame complete with 152 Altair louvres. The 2400 high windows
consisted of louvres of 16 operable blades with a fixed extension blade.
The results of these field tests gave the following sound transmission loss.
Altair® Louvre Gallery Features Off Standard Louvre Gallery Heights (Extended Channel)
Gallery Type Options It is recommended that, wherever possible, Altair Louvre Windows should be designed to a standard height.
• Single Operating Mechanism This will reduce the product cost and ensure effective opening of all blades.
• PowerlouvreTM (only available in the Easyscreen Window In some circumstances this may not be possible. In these instances the Altair Louvre can be ordered with
System) Extended Channel. The Extended Channel is a continuation of the channel that is cut to size, giving improved
• The StrongholdTM System appearance and water performance in comparison to an add-on extension piece.
The Louvre is supplied with an Extended Channel that can be cut back to the required height. Note that the
“Standard” Inclusions part to be cut down is located at the top of the gallery.
• Handle control: Left; single operating (viewed from inside);
Off-standard heights within 5mm of a standard height do not need a fixed blade but the shrouds of the top
• Standard Handle;
clips may need to be trimmed for off-standard heights between 5mm and 2mm below a standard height.
• Standard Heights;
• Clips: Suit 6mm blades; Off-standard heights that are not within 5mm of a standard height will be fitted with a top fixed blade.
• Screw Holes: With or without. For example, the louvre illustrated is ordered as 3 blade with Extended Channel.
Handles
HandleOverall
FrontClip
View
Size Overall Clip Size
Handle Front View Overall Clip Size
Clip Projection Clip Projection
38mm Clip Projection
38mm
184mm Travel
R13 R13
2mm
R120mm 102 Louvres:
R10R147m
206mm Travel
R14
206mm Travel
5mm 5mm m 7mm Overall clip size = 128mm
Clip projection = 44mm
38mm
OPEN OPEN
OPEN OPEN OPEN OPEN *Available ex. Australia only.
184mm Travel
R13
2mm R14
206mm Travel
105mm 38mm R10 7mm
m 147mm 5mm
10mm CLOSED
CLOSED 152 Louvres: 38mm
38mm
Overall clip147mm
size = 147mm 38mm
9-15/32"
38mm 115mm
6-7/32"
CLOSED 171mm
OPEN 115mm
OPEN CLOSED CLOSED
R14 Clip projection
CLOSED 198mm= 66mm CLOSED
184mm206mm Travel
R10 7mm
5mm 198mm 102 Louvres: OPEN OPEN OPEN
64mm R14
64mm Overall clip size
R14 = R1
R1 7mm
206mm Travel
156mm Travel
206mm Travel
15m
134mm 7mm
Travel
156mm Travel
Travel
128mm 15m m
134mm m
184mm
OPEN
OPEN OPEN
ios Inside Screen Slide Handle
™
Banks of Blades
No. of Channel
Controlled from Dim A Dim B Dim C
Blades Length DIM A
Head Downwards
2 2 320 72
3 3 460 212
4 4 600 212
5 5 740 212
6 6 880 492
7 7 1020 632
DIM B
8 8 1160 632
9 9 1300 632
10 7 3 1440 632 1192
11 7 4 1580 632 1192
12 7 5 1720 632 1192
13 8 5 1860 632 1332
14 9 5 2000 632 1472 DIM C
15 7 8 2140 632 1612
16 7 9 2280 632 1612
17 8 9 2420 632 1752
18 9 9 2560 1052 1892 Standard Handle Low Profile Handle
19 9 4 6 2700 1052 1472 2312
20 9 6 5 2840 1052 1752 2312
21 9 7 5 2980 1052 1892 2452
NOTES:
• Additional handles can be specified or relocated to another position. Ring Pull Handle
Each handle can operate a maximum of nine clips including at least (A13)
one clip directly below the handle.
Refined Design
• Aluminium blades in solid colours can bring a sharp, modern aesthetic to
your design and provide shading and privacy benefits.
152.4mm ±0.6mm
Outside Edge
152.4mm ±0.6mm
Top Bottom
Edge Outside Edge
Inside Edge Co-extruded Santoprene Edge
Weatherseal
Top Bottom
Edge Inside Edge Co-extruded Santoprene Edge
Weatherseal
102.6mm ±0.6mm
102mm Aluminium
Outside EdgeBlade
102.6mm ±0.6mm
Top Bottom
Edge Inside Edge
Outside Edge Edge
Top Bottom
Edge Inside Edge Edge
Screen Housing
The Breezway Easyscreen Window System includes an
integrated insect and security screen housing that allows
easy fitting of screens to the frame. Screens can be installed
from within the building and are positioned so that they
will not interfere with the operation of the louvzre blades.
(Screens supplied by others).
Security Options
Integratd security bars are available as an option within the
Easyscreen Window Frame. Security screens can be fitted
into the Easyscreen Window System’s screen housing.
Glazing Options
The Easyscreen Window System can facilitate both louvre and fixed lite configurations, allowing
for horizontal louvre fixed lite combinations in a single frame.
Sill:
High Profile Sill 83mm Easyscreen
Jamb: Cover Plate
Head: Standard Sill 65mm 15mm Fixed Lite
Off
Fixed Lite 33.5mm
18mm 2mm
Standard
High Profile Sill 83mm
High Profile Sill 83mm 15mm
Height
Sill: Sill 65mm
Standard 33.5mm Sill 65mm
Standard
When the Easyscreen Window System extends
Louvre Head: 37.5mm 32mm
Off Window Height
Fixed Lite beyond the
15mmbuilding frame, a cover plate can be used
37.5mm
Standard 131mm to trim the assembly. (2mm extra height or width)
2mm
Height 15mm
Sill: Sill: 131mm 33.5mm
Head: Head:
Louvre Fixed Lite Fixed Lite
Off Off Window Height
Standard High Profile Sill 83mm
Standard 37.5mm
15mm 15mm
Height
Louvre
Height
Standard Sill 65mm
Louvre
33.5mm 131mm
33.5mm Easyscreen™ Window System Mullion
Window Height Window Height 37.5mm 37.5mm
High Profile Sill 83mm
Sill: Standard Sill 65mm 131mm 131mm
Louvre
High Profile Sill 83mm
High Profile Sill 83mm15mm Jamb:
Fixed Lite Window
Standard Sill 65mm
Sill: 33.5mm
Standard Sill 65mm Width
Louvre 18mm Jamb:
Louvre Mullion:
Jamb: Louvre to 58.8mm
15mm 32mm
37.5mm Fixed Lite 32mm
Sill: Sill: 33.5mm 15mm Louvre
Louvre Louvre 131mm 18mm 18.5mm
15mm 22mm 25mm
Jamb: Jamb:
15mm 15mm Fixed Lite Fixed Lite 32mm
33.5mm 33.5mm 37.5mm 15mm
131mm 18mm 18mm
12mm 12mm
37.5mm 37.5mm 32mm 32mm
15mm 15mm
131mm 131mm
Window
Jamb: Width
Louvre Mullion:
Louvre to 58.8mm
32mm
Window
Louvre
Jamb: Width 18.5mm
15mmLouvre 22mm 25mm Mullion:
Louvre to 58.8mm
Window 32mmWindow
Louvre
Jamb: Jamb: Width Width 18.5mm
12mm 12mm
Louvre Louvre 15mm 22mm Mullion: Mullion:25mm
58.8mm 58.8mm
32mm 32mm Louvre to Louvre to
Louvre Louvre
18.5mm 18.5mm
12mm
15mm 15mm 22mm 12mm22mm 25mm 25mm
NOTES:
Design Registrations apply.
12mm 12mm 12mm 12mm
25mm
12mm
Standard
Height 50mm
Head 38mm
Off
Standard
Height
25mm
Head
Standard Height
50mm
Durable
Constructed entirely of non-corrosive materials including 6060-T5 aluminium, stainless steel
and industrial strength acetal and polypropylene plastics.
Strong
Structural components of the window system are manufactured from 6060-T5 aluminium alloy.
Jamb 12.5mm
Inside Outside
25mm
12mm
Standard
Height 50mm
Head 38mm
12.5mm 1/2"
64mm
Off Standard
Height Head 1-31/32"
2-15/32"
1/2"
64mm
7/16"
12.5mm
Sill 130mm
2-7/16" 1"
11.5mm
Altair Louvres clip neatly into the frame with no visible gallery screws.
Durable Mullion
Structural components of the window system are manufactured from 6060-T5 aluminium 33mm
1.5mm
1.5mm
alloy. 12.5mm
The Breezway ios Window System includes an integrated insect and security screen housing ios Coupler and Cover Plate
that allows easy fitting of screens to the frame. Screens can be installed from within the
building and are positioned so that they will not interfere with the operation of the louvre
blades. (Screens supplied by others). 1.5mm
Couple ios Window Systems together or trim assembly that extends beyond
the building frame. (1.5mm extra height or width)
Standard Heights
152mm Galleries 102mm Galleries
EasyscreenTM Window SlimlineTM iosTM Window System EasyscreenTM Window SlimlineTM
System Window System (Philippines Only) System Window System
No. of Standard Standard Standard No. of Standard Standard
Blades Height (mm) Height (mm) Height (mm) Blades Height (mm) Height (mm)
2 371 345 346 3 361 335
3 511 485 486 4 451 325
4 651 625 626 5 541 515
5 791 765 766 6 631 605
6 931 905 906 7 721 695
7 1071 1045 1046 8 811 785
8 1211 1185 1186 9 901 875
9 1351 1325 1326 Standard Height sizes are measured from bottom 10 991 965
10 1491 1465 1466
of visible metal to top of visible metal.
11 1081 1055
11 1631 1605 1606 12 1171 1145
12 1771 1745 1746 13 1261 1235
13 1911 1885 1886 14 1351 1325
14 2051 2025 2026 15 1441 1415
14 Ext 2100 2100 2100 16 1531 1505
15 2191 2165 2166 17 1621 1595
16 2331 2305 2306 18 1711 1685
16 Ext 2400 2400 2400 19 1801 1775
17 2471 2445 2446 20 1891 1865
18 2611 2585 2586 21 1981 1955
19 2751 2725 2726 22 2071 2045
20 3891 2865 2866 22 Ext 2100 2100
21 3031 3005 3006 23 2161 2135
24 2251 2225
NOTES: 25 2341 2315
• Slimline windows with multiple bays and heights of over 10 and 16 blades respectively for 152mm Galleries 26 2431 2405
will require Heavy Duty Mullions.
27 2521 2495
• Off-standard heights that are not within 5 mm of a standard height have a fixed blade at the top to achieve
28 2611 2585
the specific height.
• Refer to the product performance warranty on possible height restrictions for different blade types and bay 29 2701 2675
widths. 30 2791 2765
• Standard sizes will save money and improve lead times. 31 2881 2855
• Maximum width = 4000mm (frames over these dimensions will need to be coupled together on site or at a 32 2971 2945
window fabricator’s factory).
33 3061 3035
• Up to 6 bays (sets of galleries) can be included in a single surround frame.
• Window Systems with Fixed Galleries consist of 152mm clips and blades. Fixed galleries are permanently
fixed with the blades at a 45 degree angle.
• Window Systems with Fixed Galleries do not meet water penetration requirements.
• Window Systems with Fixed Galleries are only available in standard heights.
Louvre Blade
Dim. A
Easyscreen Frame
Glass & Aluminium blades x = Channel extension +13mm
Dim. C
Slimline Frame
Glass & Aluminium blades x = Channel extension +20mm
Glass, Aluminium with Stronghold System Window Width - 78mm (Window Width - 151mm) / 2 (Window Width - 224mm) / 3 (Window Width - 297mm) / 4 (Window Width - 370mm) / 5
Glass, Aluminium with Stronghold System Window Width - 73mm (Window Width - 146mm) / 2 (Window Width - 194mm) / 3 (Window Width - 267mm) / 4 (Window Width - 340mm) / 5
Glass, Aluminium with Stronghold System Window Width - 73mm (Window Width - 146mm) / 2 (Window Width - 219mm) / 3 (Window Width - 292mm) / 4 (Window Width - 365mm) / 5
Up to 1000Pa Design Glass, Aluminium - 152mm 982 1959 2936 3913 4000
Wind Speed
Glass, Aluminium - 102mm 832 1659 2486 3313 4000
Up to 1500Pa Design
Glass, Aluminium 832 1659 2486 3313 4000
Wind Speed
Up to 2200Pa Design
Glass, Aluminium 682 1359 2036 2713 3390
Wind Speed
This table indicates the maximum SlimlineTM Window System width that Breezway will warrant, per wind category.
Slimline Window System Widths (mm)
Blade Type
1 bay 2 bay 3 bay 4 bay 5 bay
Up to 1000Pa Design Glass, Aluminium - 152mm 977 1954 2931 3908 4000
Wind Speed Glass, Aluminium - 102mm 827 1654 2481 3308 4000
Up to 1500Pa Design
Glass, Aluminium 827 1654 2481 3308 4000
Wind Speed
Up to 2200Pa Design
Glass, Aluminium 677 1354 2031 2708 3385
Wind Speed
This table indicates the maximum iosTM Window System width that Breezway will warrant, per wind category
(Available in Philippines Only).
ios Window System Widths (mm)
Blade Type
1 bay 2 bay 3 bay 4 bay 5 bay
Glass, Aluminium - 152mm 977 1954 2931 3908 4000
Up to 1000Pa Design
Wind Speed Glass, Aluminium - 102mm 827 1654 2481 3308 4000
Up to 1500Pa Design
Glass, Aluminium 827 1654 2481 3308 4000
Wind Speed
Up to 2200Pa Design
Glass, Aluminium 677 1354 2031 2708 3385
Wind Speed
NOTES:
Frames over 4000mm wide will need to be coupled on site or at the window fabricators factory.
An additional 2mm will be included onto the overall window height & width with each Coupler or Cover Plate added.
Altair® Powerlouvre™ System Powerlouvre™ System Operating Condition Powerlouvre™ System Maintenance
The Powerlourve Window motor is neatly concealed Breezway Powerlouvre Windows should be operated at
Tests Passed
within the EasyscreenTM Frame. monthly intervals. Frames should be cleaned periodically
Cyclical open / closed 30,000 cycles as per Breezway care and maintenance recommendations.
Salt mist 1,000 hours
Extreme humidity 90% humidity at 35 ºC
Extreme heat 60 ºC
Extreme cold 0 ºC
Complies with the requirements of EN61000-6-3
Electromagnetic Compatibility
and AS/NZS 4251.1
Powerlouvre Windows that are 2-9 blades tall contain one motor per bay and are wired such that the entire window opens and closes
simultaneously.
Powerlouvre Windows that are 10-18 blades tall contain 2 motors per bay, one motor drives the blades in the top half of the bay and the
other motor drives the blades in the bottom half of the bay. Powerlouvre Windows with 10-18 blades are wired such that the top halves
Automated Windows of all the bays open and close simultaneously and the bottom halves of all the bays
Automated windows allow integration of passive ventilation open and close simultaneously. Labelled wires emerge 1 metre from the top right
into automated climate control systems and also offer an easy Breezway Altair® Powerlouvre Window hand side of the EasyscreenTM frame.
way to operate windows that are high up and out of reach. Opening Configurations
• Operating voltage: 24V DC Breezway supplies transformers (as an optional extra) that have been specified to
• Maximum allowed voltage 29V DC meet the particular requirements of Powerlouvre Windows.
• Maximum constant current: 0.25A per motor
• Maximum startup current: 0.4A per motor • 240V AC current transformed to 2.9 amp, 24V DC constant current.
• Opening time: Approx 14 seconds • Able to provide sufficient instantaneous startup current for up to 6 Powerlouvre
Motors.
• Working temperature: -20 to +60 degrees Celsius
• Built-in overload protection to prevent accidental short circuits from damaging
the transformer.
Powerlouvre Window Type Motors per bay Maximum Constant Current Required
2-9 Blades High Without Remote Control 1 0.25 amps per bay
10-18 Blades High Without Remote Control 2 0.5 amps per bay
The direction in which the Powerlouvre Window moves is determined by the polarity of the low voltage
current supplied. Once the Powerlouvre Window has fully opened or fully closed, an electronic circuit
stops power being delivered to the motors to prevent the motor being damaged should power be
supplied continuously.
Controlling Powerlouvre™ Windows
To close the Powerlouvre Window: White Stripe White Stripe
Low Voltage + ve
24V DC Control options include:
Power Supply - ve Powerlouvre
Window
• Breezway Powerlouvre ApptivateTM Control Units, which allow control via a
touch sensitive wall plate, remote control via a smartphone application, or
White Stripe automatic operation in response to temperature or timer events.
To open the Powerlouvre Window: Low Voltage + ve • Building management systems, which allow control along with other
24V DC Powerlouvre
- ve White Stripe Window automated building products and automatic operation in response to various
Power Supply
sensors and inputs.
NOTES:
In extreme cold conditions the windows will not operate if there is excessive ice build up or if the
louvre blades are frozen together.
The Powerlouvre Apptivate Control Unit is a plastic, touch-sensitive wall switch. The ApptivateTM Control Unit includes a Bluetooth® SmartTM modules
which allows wireless communication between a compatible device
Features include: running the Powerlouvre App and the Apptivate Control Unit.
• White, standard sized wall switch. Additional features accessible through the
• Single channel and dual channel models. PowerlouvreTM App: Remote control
• Control of up to 6 Powerlouvre Motors per channel. The Powerlouvre app enables:
• Fully open, fully close or open to an intermediate (half-open) • Remote control. • Remote opening and closing of each Apptivate Control Unit.
position at a single touch. • Automatic operation in response to an in-built The range of the Bluetooth signal is approximately 10m - 20m.
• Precise control of opening angle by touching and then releasing temperature sensor. (The range will be maximised by maintaining a clear line of
when the window is in the desired position, or by touching • Automatic operation in response to pre-set sight between the device running the Powerlouvre App and the
another button to stop the window in the desired position. timers. Apptivate Control Unit.)
• Automatic operation in response to an in-built temperature • ‘Night mode’ which adjusts the brightness • Naming of Apptivate Control Units, and channels of Apptivate
sensor. of LED lights overnight to minimise potential Control Units for easy identification.
• Bluetooth® module to allow control by and communication with sleep disruptions. • An indication of the open/close position of the Powerlouvre
compatible smartphones and tablets. Windows connected to each Apptivate Control Unit.
Power Louvre Pad Printing Finals v1.1
Power Louvre Pad Printing Finals v1.1
Compatible devices
Compatible devices will have Bluetooth® SmartTM modules installed
and have an iOS or Android operating system. Devices include:
NOTES:
• As the temperature sensor will be located within the wall
cavity it may be susceptible to environmental conditions
so the temperature readings will be indicative of the air
7mm temperature within the room, but will not exactly reflect the
74mm 7mm
74mm 24mm air temperature within the room.
24mm
• When responding to temperatures both channels of Dual
ApptivateTM Control Unit ApptivateTM Control Unit Channel Apptivate Control Units will respond simultaneously
Single Channel Dual Channel to the temperature sensor.
Notes:
Notes:
Do Not Print Grey line or Circle these are for alignment
only Do Not Print Grey line or Circle these are for alignment
only
South East Asia | November 2023 | breezway.com.my
Altair Louvre Window Systems
24
Automatic operation in response to temperature Automatic operation in response to timers Control of multiple Apptivate™ Control Units
Temperatures can be set at which the Apptivate Control Unit will: Timer events (time of day and day of week) can be set to: Up to 6 Apptivate Control Units can be associated to each
• Automatically open the windows to naturally cool the room, or • Open the windows Powerlouvre App allowing building occupants to control
windows around their home from their Powerlouvre App.
• Automatically close the windows to retain warmth within the • Move the window to an intermediate position
For ease of identification:
room. • Close the windows
• Each of the Apptivate Control
• Begin responding automatically to temperatures. Units can be given a customised
Automatic response to temperature can be enabled or disabled:
name.
• Remotely from the Powerlouvre App, or
This allows the windows to be set to operate in anticipation • Each of the channels of a Dual
• Directly on the Apptivate Control Unit.
of the building occupant’s daily routine. For example, Channel Apptivate Control Unit
opening before employees arrive to pre-cool the building, or can be given a customised name.
Security responding to temperatures from when a homeowner goes to
Establishing associations between the Powerlouvre App and • The Powerlouvre App will indicate
bed so that the windows close when the temperature drops
Apptivate Control Units requires: any Apptivate Control Units which
in the early hours of the morning.
are out of range, or with which
• Close physical proximity between the Powerlouvre App and the a Bluetooth® Smart connection
Timer events can be enabled or disabled:
Apptivate Control Unit, and cannot be made.
• Remotely from the PowerlouvreTM App, or
• An access code (defined by the first Powerlouvre App to be • Directly on the Apptivate® Control Unit.
associated to the Apptivate Control Unit). This allows timer events to easily be disabled as the For maximum control and ease
homeowner leaves the house or enabled as they arrive home. of use, all the Apptivate Control
If the Access Code is forgotten, a factory reset button can be Units associated to a Powerlouvre App can be operated
activated by snapping off the front cover plate of the Apptivate simultaneously or independantly.
Control Unit and pushing a paperclip through a small hole to hold
a button down for a brief period. Security will be maximised by Control by multiple Powerlouvre™ Apps
positioning the Apptivate Control Unit in a location that restricts
NOTES: Associations can be established between multiple
unauthorised access. • When responding to timer events both channels of Powerlouvre Apps and each Apptivate Control Unit, to
Dual Channel Apptivate Control Units will respond allow all family members to control the windows from their
If restricting access to the Apptivate Control Unit is not practical simultaneously. smartphones.
then users can seal the hole to block access to the factory reset
button from the front panel necessitating the unscrewing of the
Apptivate Control Unit from the wall in order to carry out a factory
reset.
NOTES:
• Only one Powerlouvre App will be able to maintain
an active Bluetooth® Smart connection with an
Apptivate Control Unit at any given time.
5V 24V
Motor
24VDC
Group 1
Powerlouvre™ Motors and Apptivate Control Units require 24v DC power. For ease of wiring the Apptivate Control Unit The Altair® Powerlouvre Window System has been reviewed for
senses the polarity of the current provided from the transformer and automatically adjusts accordingly. compatibility by the leading suppliers of building management systems.
It is recommended that transformers are located in a position that enables easy power cycling.
300003537
When considering integration into a building management system, the
Visit www.breezway.com.au/technical/
for more information
following should be considered:
3V3
BLE
STApptivate Control Unit motor group.
Up to 6 Powerlouvre Motors can be wired in parallel to each
• Breezway does not supply the various sensors which could be used
Dual Channel Apptivate™ to instigate opening or closing of the windows (eg temperature or rain
Control Unit Wiring sensors).
• Transformer requirements may differ from the requirements of
Powerlouvre Motor Powerlouvre Windows controlled by Apptivate Control Units.
White stripe + ve
24v DC Power • The Powerlouvre Window System does not include an inbuilt
Supply electronic mechanism to inform the building management system of
– ve
Powerlouvre Motor its current open or close position.
White stripe
Motor Motor Power Input
• Powerlouvre Motors include limit switches which prevent the motors
Group 1 Group 2 24VDC
To be installed by qualified technician only
from continuing to attempt to open or close the window once the
window is fully open or fully closed, thereby preventing damage to the
5V 24V
Maximum 6 motors per motor group
300003538 Apptivate Control Units are not compatible with building management
systems.
Visit www.breezway.com.au/technical/
for more information
3V3BLEST
Cabling Requirements
Total wire length must not exceed
value given in table
1
240v AC
1 Power Supply
NOTES:
Switches
Max of 6 Motors per 2.9 amp transformer.
1.3mm² (16AWG) 150m 75m 50m 38m 30m 25m 20m 15m 12m
2mm² (14AWG) 230m 120m 80m 60m 50m 40m 30m 24m 20m
3.5mm² (12AWG) 370m 185m 125m 90m 75m 60m 45m 35m 30m
4mm² (10AWG) 550m 294m 200m 150m 120m 100m 75m 55m 45m
10mm² (8AWG) 1000m 500m 330m 250m 200m 150m 120m 100m 80m
17mm² (6AWG) 1500m 750m 500m 375m 300m 250m 175m 150m 125m
26mm² (4AWG) 8000m 4000m 2500m 2000m 1500m 1250m 1000m 800m 650m
Tables calculated using a window current of 0.25A and a voltage drop of 5% or 1V @ 24V.
Battery Backup
The Powerlouvre Window has no integrated battery back up. If the power supply fails the window cannot be operated. If battery back up is
required, systems are readily available and can be integrated by qualified suppliers.
• Maximum width = 4000mm (Frames • Off-Standard Frame Heights between REQUIRED INFORMATION OPTIONAL
over these dimensions will need to 1mm and 5mm below a Standard viewed from inside INFORMATION
be coupled on site or at a window Height are unavailable for 102mm
fabricator’s factory). Powerlouvre in the Easyscreen Frame. • Design Pressure • Left or Right Handed
• Minimum bay width (2-9 blade tall • Off-Standard Frame Heights between • Manual or Automated • Offset Mullions
windows) = 400mm 6mm and 44mm greater than a
• Frame Size • Couplers & Cover Plates
• Minimum bay width (10-18 blade tall Standard Height are unavailable for
• Gallery Clip Size
windows) = 500mm 102mm Powerlouvre in the Easyscreen
• Standard heights only. Frame. • With or without the Stronghold™
System
• Up to 6 galleries (bays) can be • Some off-standard heights are
• Height & Width
included in a single surround frame. unavailable when using the
• Combination louvre and fixed light 102mm Altair Louvre Galleries with • Number of Bays
bays are available. the Stronghold System. For the • Frame Color
• Off-Standard Frame Heights between Easyscreen System these include: • Gallery Color
6mm and 42mm greater than a Standard Height + 26mm to Standard • Clip & Handle Color
Standard Height are unavailable Frame Height + 36mm. • Gallery Clip Size
for 152mm Powerlouvre in the • Handle Type
Easyscreen Frame. • Blade Type
A tight specification will help to make sure that what you specify ends up in your building thereby achieving your design objectives.
Unique features:
• Unique drainage channels for superior water perfromance.
• Unique 'Living Hinge' design that pulls the clips tightly against the channel when closed for superior water performance and air infiltration.
• Passed testing to 40,000 open/close cycles for long operational life.
• Altair Louvres have passed AS2047 testing at 3,000mm high.
The louvre windows shall be Breezway® Altair® Louvre Windows with the StrongholdTM System
Unique features:
• Unique drainage channels for superior water performance.
• Unique 'Living Hinge' design that pulls the clips tightly against the channel when closed for superior water performance and air infiltration.
• Altair Louvres have passed testing to 40,000 open/close cycles for long operational life.
• Altair Louvre keylocks have passed testing to 15,000 lock/unlock cycles for long operational life.
• Altair Louvres have passed AS2047 testing at 3,000mm high.
• Pinned design that mechanically retains blades within the clips to prevent blade dislodgement under human impact.
The louvre windows shall be Breezway® Altair® PowerlouvreTM Windows with the StrongholdTM System
Unique features:
• Unique drainage channels for superior water performance.
• Unique 'Living Hinge' design that pulls the clips tightly against the channel when closed for superior water performance and air infiltration.
• Motors are concealed within the head of the window frame.
• Motors are easily accessible for maintenance.
• Each low voltage motor only requires 0.25 amps to reduce transformer and wiring requirements.
• Motors can be powered by appropriately specified transformers from any supplier.
• Pinned design that mechanically retains blades within the clips to prevent blade dislodgement under human impact.
Frame Options
Altair Stronghold Louvre Windows are available as complete window systems
within the Breezway Easyscreen™ and Slimline™ Window Systems, or in
component form for installation into other manufacturer’s framing systems.
Fall Prevention
Altair Louvre Windows with the Stronghold System are ideal for use in
bedrooms, early childhood centres and other situations where there is a
significant height from the window sill to the outside ground. With openings on
both sides of every blade, they deliver real ventilation benefits for naturally cool,
healthy and safe spaces. Performance is proven by successful testing to the
Australian Industry Code of Practice “ICP.005 - Protection of Openable Window
Testing Specification” and AS5203:2016.
NOTES:
Patented design.
Some off-standard heights are unavailable when using the 102mm Altair Louvre
Galleries with the Stronghold System.
Maintenance
Unavailable Off-Standard Heights when
If blades need to be removed from an Altair Stronghold Louvre Window or if broken using 102mm Altair Galleries with the
blades need to be replaced, the pins must be removed. The removal process Stronghold System
requires tools and will destroy the pins so new pins will be required when blades
are re-installed. Standard height + 26mm
Easyscreen
to
Window System
standard height + 36mm
A tight specification will help to make sure that what you specify ends up in your building thereby achieving your design objectives.
The louvre windows shall be Breezway® Altair® Louvre Windows with the StrongholdTM System
Unique features:
• Unique drainage channels for superior water performance.
• Unique 'Living Hinge' design that pulls the clips tightly against the channel when closed for superior water performance and air
infiltration.
• Pinned design that mechanically retains blades within the clips to prevent blade dislodgement under human impact.
The louvre windows shall be Breezway® Altair® PowerlouvreTM Windows with the StrongholdTM System
Unique features:
• Unique drainage channels for superior water performance.
• Unique 'Living Hinge' design that pulls the clips tightly against the channel when closed for superior water performance and air
infiltration.
• Motors are concealed within the head of the window frame.
• Motors are easily accessible for maintenance.
• Each low voltage motor only requires 0.25 amps to reduce transformer and wiring requirements.
• Motors can be powered by appropriately specified transformers from any supplier.
• Pinned design that mechanically retains blades within the clips to prevent blade dislodgement under human impact.
In component form, Breezway Altair louvre galleries can be used in most regular timber, aluminium and uPVC window Used in Conjunction with Extended Louvre Channel.
frames. In such instances, Altair galleries and weatherstrips are simply screwed or clipped into place within the window
frame. If installed in a frame that is plumb and true, and according to Breezway’s installation instructions, the Altair
performance warranty applies in full.
Standard Sill
Standard Heights
Heights for 102mm Blade Louvre Gallery Heights for 152mm Blade Louvre Gallery
No. of Height (mm) No Height (mm) Blades Controlled in Banks No. of Height (mm) No Height (mm) Blades Controlled in Banks
Blades W’strip With W’strip from Head Down Blades W’strip With W’strip from Head Down
3 310 320 3 2 320 330 2
4 400 410 4 3 460 470 3
5 490 500 5
4 600 610 4
6 580 590 6
5 740 750 5
7 670 680 7
8 6 880 890 6
760 770 8
9 850 860 9 7 1020 1030 7
10 940 950 6 4 8 1160 1170 8
11 1030 1040 6 5 9 1300 1310 9
12 1120 1130 6 6
10 1440 1450 7 3
13 1210 1220 6 7
11 1580 1590 7 4
14 1300 1310 7 7
15 1390 1400 7 8 12 1720 1730 7 5
16 1480 1490 9 7 13 1860 1870 8 5
17 1570 1580 9 8 14 2000 2010 9 5
18 1660 1670 9 9 15 2140 2150 7 8
19 1750 1760 9 5 5
16 2280 2290 7 9
20 1840 1850 9 5 6
17 2420 2430 8 9
21 1930 1940 9 5 7
22 2020 2030 9 6 7 18 2560 2570 9 9
23 2110 2120 9 7 8 19 2700 2710 9 4 6 38.4mm
24 2200 2210 9 6 9 20 Height with no
2840 2850 9 6 5
17.5mm weatherstrip
25 2290 2300 9 9 7 21 2980 2990 9 7 5
26 2380 2390 9 9 8
27 2470 2480 9 9 9
28 2560 2570 9 6 4 9
29 2650 2660 9 6 5 9
30 2740 2750 9 7 5 9
31 2830 2840 9 7 6 9
32 2920 2930 9 7 7 9
33 3010 3020 9 7 8 9 Height with
weatherstrip
Blade Formulas
Blade Length
Louvre
Blade
Louvre
Clip
Blade Cut Length
152.0mm
±0.6mm χ
Blade
thickness Blade Cut Length ±0.6mm Blade
6mm thickness Blade Cut Length ±0.6mm
6mm
NOTES:
Laminated glass is not recommended for external use due to the risk of de-lamination.
Fixed Louvre
No. of Height (mm) Height (mm) Applications for Fixed Vent Louvres
Blades No Weatherstrip With Weatherstrip
Head
Use fixed vent louvres where permanent ventilation, light,
3 310 320 privacy and a degree of weatherproofing is required.Some
4 400 410 typical applications include:
5 490 500 Height • Vented roofs
6 580 590 No • Laundries (industrial, domestic)
7 670 680
Weatherstrip
• Bathrooms
8
Height
760 770
45˚ With • Public Amenities
9 850 860 Weatherstrip • Housing for air conditioning units
10 940 950
11 1030 1040
12 1120 1130
13
90mm NOTES:
1210 1220
14 1300 1310 • Not Available in 102mm
15 1390 1400 • This product does not meet AS2047 water penetration
16 1480 1490 requirements.
17
• Fixed louvres are only available in standard heights ie.
1570 1580
18 1660 1670
extended channel not available.
19 1750 1760
20 1840 1850
21 1930 1940
22 2020 2030 50mm
23 2110 2120 51mm
24 2200 2210
25 2290 2300
26 2380 2390
27 2470 2480
28 2560 2570
29 2650 2660
30 2740 2750
31 2830 2840
32 2920 2930
33 3010 3020 Sill
Altair Mullions can be secured from the outside of the window frame using the screw flutes, or secured
REQUIRED INFORMATION OPTIONAL INFORMATION
from the inside of the frame using brackets. Installers are responsible for ensuring that appropriate fixings
are used for the frame and site wind ratings. • Gallery Clip Size • Left or Right Handed
• Gallery Height • Handle Type
• Gallery Colours • Variable Handle Position/Additional Handles
• With or without the Stronghold™ System
• Clips & Handle Colour
8 Gauge Screw • Blade Length & Type
• Weather strip for head & sill
2 x Rivets
Fixing Bracket
38mm x 1.5mm Medium Duty Mullion
Altair® Louvres For Other Frames Recommended
2 x Rivets Specification
Weatherstrip Extrusion
8 Gauge Screw A tight specification will help to make sure that what you specify ends up in your
building thereby achieving your design objectives.
Fixing Bracket
(2 sets required
per Medium Duty Mullion)
The louvre windows shall be Breezway® Altair® Louvre Windows
Unique features:
Bracket Details for Medium Duty Mullion • Unique drainage channels for superior water performance.
• Unique 'Living Hinge' design that pulls the clips tightly against the channel
when closed for superior water performance and air infiltration.
• Passed testing to 40,000 open/close cycles for long operational life.
• Altair Louvres have passed AS2047 testing at 3,000mm high.
The louvre windows shall be Breezway® Altair® Louvre Windows with the
StrongholdTM System
Unique features:
• Unique drainage channels for superior water performance.
• Unique 'Living Hinge' design that pulls the clips tightly against the channel
when closed for superior water performance and air infiltration.
• Altair Louvres have passed testing to 40,000 open/close cycles for long
operational life.
• Altair Louvre keylocks have passed testing to 15,000 lock/unlock cycles for
long operational life.
• Altair Louvres have passed AS2047 testing at 3,000mm high.
• Pinned design that mechanically retains blades within the clips to prevent
blade dislodgement under human impact.
Installation Instructions
Standard Height Gallery Fixings Off-Standard Height
7 Check galleries to be true and plumb (Standard Height Only) 8 Calculation of blade width (Standard Height Only)
A Head/Sill Section
Stainless Steel Pan Head
Weather Strip D Screws 6 Gauge x 20mm Long J
B (with Rubber Seal)
Stainless Steel Flat Head Countersunk B
E Screws 8 Gauge x 30mm Long Clips to suit 6mm thick blades
C
L
m
x – 52mm = y
ore
Louvre Gallery Power Drill (long
Outside wall A Clips to suit 14mm thick blades
(with handle) F drill bit required) Note: Drill detail x – 72mm = z
J Orientation of 3x Holes
B weatherstrip
TO INSERT BLADES:
with rubber seal x
G Sealant Glass or Aluminium Extension B Slide blades into clips from the
inside of the building. Wet clips
B Blade Carrier x
to ease installation of blades
K
H Spirit Level
A 8mm
x – 37mm y or z
Drill detail 70mm
I Hacksaw (Off-Standard
Gallery Only)
4 Insert louvre galleries 5 Attach Louvre galleries 6 Insert and attach head section
C HEAD section
C section
E
A Pan Head
Note: Do not over tighten
the screws
or for Off-Standard
Use E flat head
Outside wall screws if a fixed
Screw Bit Head/Sill
Section Outside blade carrier
Note: Do not over tighten the screws - Some wall is required
aluminium frames DO NOT require screw holes
Breezway®, Altair®, Stronghold™, Powerlouvre™, Easyscreen™, Apptivate™, ios™, Slimline™ are all trademarks of the Breezway Group of Companies. TM denotes
trademarks owned or licensed by Breezway Australia Pty Limited. Copyright owned by Breezway Australia July 2022