—

SAFETY PRODUCTS

Non-contact safety sensor

Eden
Eden is a non-contact safety sensor
used as interlocking device for e.g.
doors and safe position monitoring.

Eden consists of two parts: Adam and

Eva. Adam senses the presence of
Eva without mechanical contact and
therefore without any wear.
The compact size of Eden and its 360°
mounting possibility make it easy to
use in most applications.

Different models of Eden are available

for different types of control modules.
All Eden models make it very easy to
reach PL e, often using fewer compo-
nents than other solutions.

All Eden models have an IP67/IP69K

sealing and it is available with coated
electronics for increased protection.

Continuous operation Affordable range Easy to install

Easier troubleshooting Local reset function Large mounting tolerance

Extensive LED indication and status The integrated reset function reduces A 360° mounting possibility with gen-
information reduce downtime. the number of cables and PLC inputs. erous tolerances facilitates mounting.

Suitable in demanding environments PL e with fewer components Fast connection

IP67/IP69K, a temperature range of Series connection with PL e, local M12 connectors, local reset and acces-
-40 to +70°C and optional coated reset and DYNlink signal allow to sories speed up installation.
electronics offer an increased resis- considerably reduce the number of
tance in demanding environments. components needed to reach PL e.

No wear, no mechanical breakage

Non-contact sensing means no me-
chanical wear and the large sensing
tolerance gives a better tolerance to
vibrations, resulting in fewer unwanted
process stops.
—
Eden
Features

OSSD and DYNlink Eden C

Eden is available with two different communication proto- Models of Eden are available with optional coated elec-
cols - OSSD and DYNlink. OSSD is a standardized 2-channel tronics, in order to increase the protection in demanding
safety signal commonly used for e.g. light guards. It can evnvironments. Eden C has an increase resistance to rapid
be used with most safety relays and safety PLC's on the temperature changes and can be exposed to humidity up
market. DYNlink is a unique signal for ABB Safety Products to 95%, regardless of icing or condensation.
with excellent fault detection capabilities. In order to use
DYNlink you need a Vital safety controller, Pluto program- Eden C should not be used in direct contact with food-
mable safety controller or B&R X20 safety PLC. stuff, but is recommended for Food and Beverage areas
with wash down and indirect or no food contact.

Pluto and a DYNlink circuit with 10 Eden sensors

StatusBus Local reset

Simpler models of Eden have an info signal for indicating Each Eden sensor can have its own local reset button with-
the status of a sensor. But Eden is also available with Sta- out the need of separate cables for each button.
tusBus - a simple and clever way to get individual status • One reset button per Eden with only one control
information from up to 30 sensors using just one I/O on module
the Safety PLC. No specific bus cable or extra communica- • Each button has its own reset indication
tion module is required.

2
 —
Adam

Type of safety StatusBus Info signal Local reset Series Connector Coated Type Order code
controller connection male electronics
Pluto x x 1) x M12-5 Adam DYN-Status M12-5 2TLA020051R5200
Pluto or Vital x x M12-5 Adam DYN-Info M12-5 2TLA020051R5100
x Adam C DYN-Info M12-5 2TLA020051R5101
x x M12-5 Adam DYN-Reset M12-5 2TLA020051R5300
2TLC010045V0201

OSSD compatible x M12-5 Adam OSSD-Info M12-5 2TLA020051R5400

(incl. Pluto and
Sentry) x Adam C OSSD-Info M12-5 2TLA020051R5401

Adam DYN-Info M12-5 x M12-8 Adam OSSD-Info M12-8 2TLA020051R5700

x Adam C OSSD-Info M12-8 2TLA020051R5701
x M12-5 Adam OSSD-Reset M12-5 2TLA020051R5600
x M12-8 Adam OSSD-Reset M12-8 2TLA020051R5900
1) Pin 5 can be used as a standard info signal or StatusBus.

—
Eva

Compatible Adam Code description Code level Coated Type Order code
2TLC010061V0201

electronics
Adam DYN and OSSD General code. (Eva is interchangeable) Low level Eva General code 2TLA020046R0800
x Eva C General code 2TLA020046R0801
Eva General code Unique code. (Prevents defeat/fraud) High level Eva Unique code 2TLA020046R0900
x Eva C Unique code 2TLA020046R0901

— —
CONTACT Note We reserve all rights in this document
2TLC010044L0201 revC

ABB Electrification Sweden AB We reserve the right to make technical and in the subject matter and illustra-
SE-721 61 Västerås, Sweden changes or modify the contents of this tions contained therein. Any reproduc-
Tel. +46 (0)21-32 50 00 document without prior notice. With tion, disclosure to third parties or
regard to purchase orders, the agreed utilization of its contents – in whole or
[Link]/low-voltage particulars shall prevail. ABB does not in parts – is forbidden without prior
accept any responsibility whatsoever for written consent of ABB.
potential errors or possible lack of infor- Copyright© 2023 ABB.
mation in this document. All rights reserved.