Scribd
Upload
217 views3 pages

VUETRADE Installation Guide T Blade Post Supports - Vers2

This 3 page document provides installation instructions for installing a T Blade Post Support with or without a T Blade Cap. It includes measuring and cutting the post, drilling holes, inserting and bolting the post support, adding an optional cap, sliding on the post and bolting it in place. Tables provide recommended slot sizes, hole sizes, bolt sizes and product codes for different post sizes.

Uploaded by

saagar8
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views3 pages

VUETRADE Installation Guide T Blade Post Supports - Vers2

This 3 page document provides installation instructions for installing a T Blade Post Support with or without a T Blade Cap. It includes measuring and cutting the post, drilling holes, inserting and bolting the post support, adding an optional cap, sliding on the post and bolting it in place. Tables provide recommended slot sizes, hole sizes, bolt sizes and product codes for different post sizes.

Uploaded by

saagar8
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

PAGE 1

This VUETRADE™ Installation Guide details how to install a T Blade Post Support with or without a T Blade Cap.

⇒ Measuring up from the base of the post ensuring


space is allowed for the base plate bolt heads and T
Blade Cap (see Table 1 for recommended slot sizes); cut
a 10.0mm wide slot in the centre of the timber post base

Table 1

Product Code Suits Post Size Slot Size

VBPTB90100 90mm-100mm 230mm

VBPTB115140 115mm-140mm 255mm

VBPTB150180 150mm-180mm 280mm

VBPTB180200 180mm-200mm 330mm

⇒ Lay the post support on the outside of the post, lining up


the top of the blade with the top of the slot. There should
be a gap between the post support base and the timber
post base, to allow space for bolt heads and T Blade Cap.
⇒ Using the marked holes, drill the hole to suit your post
support (See Table 2)

Table 2

Product Code T-Blade Recommended Minimum


Hole Size Hole Size for Bolt Size
Timber

VBPTB90100 14mm 12mm 12mm

VBPTB115140 18mm 16mm 16mm

VBPTB150180 18mm 16mm 16mm

VBPTB180200 18mm 16mm 16mm


PAGE 2

⇒ Place the post support in position and bolt down using screw
bolts (See Table 3)

Table 3
Product Code Base Plate Recommended Minimum
Hole Size Hole Size for Bolt Size
Concrete

VBPTB90100 14mm 12mm 12mm

VBPTB115140 18mm 16mm 16mm

VBPTB150180 18mm 16mm 16mm

VBPTB180200 18mm 16mm 16mm

⇒ If using, Slide the T-Blade Cap over the installed post anchor,
covering the bolts.

Ensure you fit the bolt concealing cap PRIOR to bolting the post
to the post support – T Blade Caps cannot be retro-fitted!
PAGE 3

⇒ Slide Timber Post Over T-Blade Post Support - the pre-drilled


holes in the timber post will match up with the holes in the post
support

⇒ Using bolts to suit the post support size, bolt the timber post
into position (See Table 2)

Table 2

Product Code T-Blade Recommended Minimum


Hole Size Hole Size for Bolt Size
Timber

VBPTB90100 14mm 12mm 12mm

VBPTB115140 18mm 16mm 16mm

VBPTB150180 18mm 16mm 16mm

VBPTB180200 18mm 16mm 16mm

You might also like