All manuals and user guides at all-guides.

com
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

SERVICE MANUAL
No. SX9D1LC32L705

LCD COLOUR TELEVISION

LC-32LE705E/S, LC-32LU705E/S
LC-32LX705E
LC-40LE705E/S, LC-40LU705E/S

m
LC-40LX705E
LC-46LE705E/S, LC-46LU705E/S
LC-46LX705E
MODELS

.co LC-52LE705E/S
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original
condition and only parts identical to those specified should be used.

OUTLINE
es
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S has been issued to cover the modifications of some parts in reference
to redesigned LCD panel module of Model LC-32/40/46/52LE700E/S. In this Service Manual, the modifications from Model LC-32/
40/46/52LE700E/S (No. S89B4LC32L700) are focused on. For what is left out herein, please refer back to the Service Manual of
the previous model LC-32/40/46/52LE700E/S (No. S89B4LC32L700).

CONTENTS
uid

OUTLINE AND DIFFERENCES FROM BASE MODEL CHAPTER 3. MAJOR IC INFORMATIONS

OUTLINE.............................................................i [1] MAJOR IC INFORMATIONS .........................3-1
LIST OF CHANGED PARTS
(LC-32LE705E/S, LU705E/S, LX705E)...............i CHAPTER 4. OVERALL WIRING/SYSTEM BLOCK
LIST OF CHANGED PARTS DIAGRAM
(LC-40LE705E/S, LU705E/S, LX705E)..............ii [1] OVERALL WIRING DIAGRAM ......................4-1
-g

LIST OF CHANGED PARTS [2] SYSTEM BLOCK DIAGRAM .........................4-5

(LC-46LE705E/S, LU705E/S, LX705E)............. iii
LIST OF CHANGED PARTS CHAPTER 5. PRINTED WIRING BOARD
(LC-52LE705E/S)..............................................iv ASSEMBLIES
[1] MAIN Unit ......................................................5-1
all

SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY CHAPTER 6. SCHEMATIC DIAGRAM
PRECAUTION....................................................v [1] DESCRIPTION OF SCHEMATIC
Precautions for using lead-free solder ..............vi DIAGRAM......................................................6-1
End of life disposal ........................................... vii [2] SCHEMATIC DIAGRAM ................................6-2

CHAPTER 1. REMOVING OF MAJOR PARTS Parts Guide

[1] REMOVING OF MAJOR PARTS ................... 1-1

CHAPTER 2. ADJUSTMENT
[1] ADJUSTMENT PROCEDURE ....................... 2-1

Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.

This document has been published to be used for

after sales service only.
The contents are subject to change without notice.
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
LC-32LE705E
OUTLINE AND DIFFERENCES FROM BASE MODEL
Service Manual

OUTLINE
LC-32/40/46LE705E/S, LU705E/S, LX705E, 52LE705E/S has been issued to cover the modifications of some parts in reference to redesigned LCD
panel module of Model LC-32/40/46/52LE700E/S. In this Service Manual, the modifications from Model LC-32/40/46/52LE700E/S (No.
S89B4LC32L700) are focused on. For what is left out herein, please refer back to the Service Manual of the previous model LC-32/40/46/52LE700E/
S (No. S89B4LC32L700).

LIST OF CHANGED PARTS (LC-32LE705E/S, LU705E/S, LX705E)

Ref No. Description LC-32LE/LU/LX700E/S LC-32LE/LU705E/S/LX705E Interchangeability Note

(No. S89B4LC32L700) (No. SX9D1LC32L705 )
PRINTED WIRING BOARD ASSEMBLIES
MAIN Unit DUNTKF306FM01 DKEYDF306FM10 D Changed
KEY Unit DUNTKE266FM18 ← — No change
R/C, LED Unit DUNTKF308FM02 ← — No change
ICON Unit DUNTKF314FM02 ← — No change
POWER Unit RUNTKA619WJQZ ← — No change
LCD Control Unit RUNTK4225TPZU ← — No change
LED5-PWB1 Unit RUNTKA655WJ01 ← — No change
LED5-PWB2 Unit RUNTKA655WJ02 ← — No change
LED8-PWB1 Unit RUNTKA658WJ01 ← — No change
LED8-PWB2 Unit RUNTKA658WJ02 ← — No change

LCD PANEL
32" LCD Panel Module Unit DLCUCA001FM03 ← — No change

MAIN Unit
IC2002 IC RH-iXC786WJN5Q RH-iXC786WJNAQ D Changed
IC3302 IC RH-iXC773WJQZQ RH-iXC951WJQZQ D Changed

CABINET AND MECHANICAL PARTS

Please refer to a Parts list
LCD MODULE Assembly
Please refer to a Parts list
SUPPLIED ACCESSORIES
Please refer to a Parts list
PACKING PARTS (NOT REPLACEMENT ITEM)
Please refer to a Parts list

NOTE: If it is necessary to replace IC8401 and IC3302, replace the main unit.

Interchangeability
Interchangeable from
A: Completely interchangeable OLD = NEW C:
NEW to OLD NEW OLD
Interchangeable from
B:
OLD to NEW OLD NEW D: Not interchangeable NEW X OLD

i
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
LIST OF CHANGED PARTS (LC-40LE705E/S, LU705E/S, LX705E)

Ref No. Description LC-40LE/LU/LX700E/S LC-40LE/LU705E/S/LX705E Interchangeability Note

(No. S89B4LC32L700) (No. SX9D1LC32L705)
PRINTED WIRING BOARD ASSEMBLIES
MAIN Unit DUNTKF306FM01 DKEYDF306FM10 D Changed
KEY Unit DUNTKE266FM18 ← — No change
R/C, LED Unit DUNTKF308FM02 ← — No change
ICON Unit DUNTKF314FM02 ← — No change
POWER Unit RUNTKA642WJQZ ← — No change
LCD Control Unit RUNTK4225TPZU ← — No change
LED5-PWB1 Unit RUNTKA655WJ01 ← — No change
LED5-PWB2 Unit RUNTKA655WJ02 ← — No change
LED6-PWB1 Unit RUNTKA656WJ01 ← — No change
LED6-PWB2 Unit RUNTKA656WJ02 ← — No change

LCD PANEL
40" LCD Panel Module Unit DLCUCA002FM07 ← — No change

MAIN Unit
IC2002 IC RH-iXC786WJN5Q RH-iXC786WJNAQ D Changed
IC3302 IC RH-iXC773WJQZQ RH-iXC951WJQZQ D Changed

CABINET AND MECHANICAL PARTS

Please refer to a Parts list
LCD MODULE Assembly
Please refer to a Parts list
SUPPLIED ACCESSORIES
Please refer to a Parts list
PACKING PARTS (NOT REPLACEMENT ITEM)
Please refer to a Parts list

NOTE: If it is necessary to replace IC8401 and IC3302, replace the main unit.

Interchangeability
Interchangeable from
A: Completely interchangeable OLD = NEW C:
NEW to OLD NEW OLD
Interchangeable from
B:
OLD to NEW OLD NEW D: Not interchangeable NEW X OLD

ii
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
LIST OF CHANGED PARTS (LC-46LE705E/S, LU705E/S, LX705E)

Ref No. Description LC-46LE/LU/LX700E/S LC-46LE/LU705E/S/LX705E Interchangeability Note

(No. S89B4LC32L700) (No. SX9D1LC32L705)
PRINTED WIRING BOARD ASSEMBLIES
MAIN Unit DUNTKF306FM01 DKEYDF306FM10 D Changed
KEY Unit DUNTKE266FM18 ← — No change
R/C, LED Unit DUNTKF308FM02 ← — No change
ICON Unit DUNTKF314FM02 ← — No change
POWER Unit RUNTKA643WJQZ ← — No change
LCD Control Unit RUNTK4225TPZU ← — No change
LED5-PWB1 Unit RUNTKA655WJ01 ← — No change
LED5-PWB2 Unit RUNTKA655WJ02 ← — No change
LED6-PWB1 Unit RUNTKA656WJ01 ← — No change
LED6-PWB2 Unit RUNTKA656WJ02 ← — No change
LED8-PWB1 Unit RUNTKA658WJ01 ← — No change
LED8-PWB2 Unit RUNTKA658WJ02 ← — No change

LCD PANEL
46" LCD Panel Module Unit DLCUCA003FM07 ← — No change

MAIN Unit
IC2002 IC RH-iXC786WJN5Q RH-iXC786WJNAQ D Changed
IC3302 IC RH-iXC733WJQZQ RH-iXC951WJQZQ D Changed

CABINET AND MECHANICAL PARTS

Please refer to a Parts list
LCD MODULE Assembly
Please refer to a Parts list
SUPPLIED ACCESSORIES
Please refer to a Parts list
PACKING PARTS (NOT REPLACEMENT ITEM)
Please refer to a Parts list

NOTE: If it is necessary to replace IC8401 and IC3302, replace the main unit.

Interchangeability
Interchangeable from
A: Completely interchangeable OLD = NEW C:
NEW to OLD NEW OLD
Interchangeable from
B:
OLD to NEW OLD NEW D: Not interchangeable NEW X OLD

iii
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
LIST OF CHANGED PARTS (LC-52LE705E/S)

Ref No. Description LC-52LE700E/S LC-52LE705E/S Interchangeability Note

(No. S89B4LC32L700) (No. SX9D1LC32L705)
PRINTED WIRING BOARD ASSEMBLIES
MAIN Unit DUNTKF306FM01 DKEYDF306FM10 D Changed
KEY Unit DUNTKE266FM18 ← — No change
R/C, LED Unit DUNTKF308FM02 ← — No change
ICON Unit DUNTKF314FM02 ← — No change
POWER Unit RUNTKA643WJQZ ← — No change
LCD Control Unit RUNTK4225TPZU ← — No change
LED6-PWB1 Unit RUNTKA656WJ01 ← — No change
LED6-PWB2 Unit RUNTKA656WJ02 ← — No change
LED8-PWB1 Unit RUNTKA658WJ01 ← — No change
LED8-PWB2 Unit RUNTKA658WJ02 ← — No change

LCD PANEL
52" LCD Panel Module Unit DLCUCA004FM07 ← — No change

MAIN Unit
IC2002 IC RH-iXC786WJN5Q RH-iXC786WJNAQ D Changed
IC3302 IC RH-iXC733WJQZQ RH-iXC951WJQZQ D Changed

CABINET AND MECHANICAL PARTS

Please refer to a Parts list
LCD MODULE Assembly
Please refer to a Parts list
SUPPLIED ACCESSORIES
Please refer to a Parts list
PACKING PARTS (NOT REPLACEMENT ITEM)
Please refer to a Parts list

NOTE: If it is necessary to replace IC8401 and IC3302, replace the main unit.

Interchangeability
Interchangeable from
A: Completely interchangeable OLD = NEW C:
NEW to OLD NEW OLD
Interchangeable from
B:
OLD to NEW OLD NEW D: Not interchangeable NEW X OLD

iv
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
LC-32LE705E
SAFETY PRECAUTION Service Manual

IMPORTANT SERVICE SAFETY PRECAUTION

Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the
servicing guidelines which follow:

„ WARNING • Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral-
leled by a 0.15µF capacitor in series with all exposed metal cabinet
1. For continued safety, no modification of any circuit should be parts and a known earth ground, such as electrical conduit or elec-
attempted.
trical ground connected to an earth ground.
2. Disconnect AC power before servicing. • Use an AC voltmeter having with 5000 ohm per volt, or higher, sen-
sitivity or measure the AC voltage drop across the resistor.
CAUTION: • Connect the resistor connection to all exposed metal parts having a

m
FOR CONTINUED PROTECTION AGAINST A return to the chassis (antenna, metal cabinet, screw heads, knobs
and control shafts, escutcheon, etc.) and measure the AC voltage
RISK OF FIRE REPLACE ONLY WITH SAME
drop across the resistor.
TYPE FUSE. All checks must be repeated with the AC cord plug connection
reversed. (If necessary, a nonpolarized adaptor plug must be used

.co
32 inch model: F7001, F7002 (2.5A/250V) only for the purpose of completing these checks.)
Any reading of 1.05 V peak (this corresponds to 0.7 mA peak AC.)
40 inch model: F7001, F7002 (5A/250V) or more is excessive and indicates a potential shock hazard which
46/52 inch model: F7001, F7002 (6.3A/250V) must be corrected before returning the monitor to the owner.

„ BEFORE RETURNING THE RECEIVER

(Fire & Shock Hazard) DVM
AC SCALE
es
Before returning the receiver to the user, perform the following
safety checks:
1.5k ohm
3. Inspect all lead dress to make certain that leads are not pinched, 10W
and check that hardware is not lodged between the chassis and
other metal parts in the receiver.
4. Inspect all protective devices such as non-metallic control knobs,
uid

insulation materials, cabinet backs, adjustment and compartment

covers or shields, isolation resistor-capacitor networks, mechanical 0.15 µF
insulators, etc. TEST PROBE
5. To be sure that no shock hazard exists, check for leakage current in
the following manner.
• Plug the AC cord directly into a 220~240 volt AC outlet.

TO EXPOSED CONNECT TO
-g

METAL PARTS KNOWN EARTH

GROUND

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
all

Many electrical and mechanical parts in LCD color television have For continued protection, replacement parts must be identical to those
special safety-related characteristics. used in the original circuit.
These characteristics are often not evident from visual inspection, nor The use of a substitute replacement parts which do not have the same
can protection afforded by them be necessarily increased by using safety characteristics as the factory recommended replacement parts
replacement components rated for higher voltage, wattage, etc. shown in this service manual, may create shock, fire or other hazards.
Replacement parts which have these special safety characteristics are
identified in this manual; electrical components having such features
are identified by “ ” and shaded areas in the Replacement Parts
List and Schematic Diagrams.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

v
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
Precautions for using lead-free solder

„Employing lead-free solder

• “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The
alphabetical character following LF shows the type of lead-free solder.
Example:

LFa L F a/a
Indicates lead-free solder of tin, silver and copper. Indicates lead-free solder of tin, silver and copper.

„Using lead-free wire solder

• When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause dam-
age or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40 °C, we recommend you to use a dedicated soldering
bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area.

„Soldering
• As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 °C which is higher than the conventional lead solder by 40 °C, and as it has poor
solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be
peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the
steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as
required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.

• Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing
Part No. Description Code
ZHNDAi123250E J φ0.3mm 250g (1roll) BL
ZHNDAi126500E J φ0.6mm 500g (1roll) BK
ZHNDAi12801KE J φ1.0mm 1kg (1roll) BM

vi
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
End of life disposal

End of life disposal

A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that
requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their
used electrical and electronic equipment to designated collection facilities free of charge*. In some countries*
your local retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
Attention: Your
product is marked If your used electrical or electronic equipment has batteries or accumulators, please dispose of these
with this symbol. separately beforehand according to local requirements.
It means that used
electrical and By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
electronic products recovery and recycling and thus prevent potential negative effects on the environment and human health
should not be which could otherwise arise due to inappropriate waste handling.
mixed with general
household waste. 2. In other Countries outside the EU
There is a separate If you wish to discard this product, please contact your local authorities and ask for the correct method of
collection system for disposal.
these products.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if
you don’t purchase a new product. Further collection facilities are listed on the homepage of [Link]
or [Link].

B. Information on Disposal for Business Users

1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be
charged for the costs arising from take-back and recycling. Small products (and small amounts) might be
taken back by your local collection facilities.

For Spain: Please contact the established collection system or your local authority for take-back of your used
products.

2. In other Countries outside the EU

If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.

The battery supplied with this product contains traces of Lead.

For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household
waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in
accordance with legislation. Please contact your local authority for details on the collection and recycling
schemes.

For Switzerland: The used battery is to be returned to the selling point.

For other non-EU countries: Please contact your local authority for correct method of disposal of the used
battery.

vii
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
CHAPTER 1. REMOVING OF MAJOR PARTS
LC-32LE705E
Service Manual

[1] REMOVING OF MAJOR PARTS

1. Removing of Bezel Ass’y, Panel Chassis Ass’y, Optical Sheet, Lens Sheet, Diffusion Plate, Back Light Chas-
sis and LCD Control Unit (32 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 10 lock screws ,10 lock screws and detach the Bezel Ass’y .
2. Detach the 32” LCD Panel HIRAKI Unit and Panel Chassis Ass’y .

3. Detach the Optical sheet and Lens Sheet and Micro Lens Sheet Diffusion Plate .

4. Remove the 16 Push Rivets and 4 Support Pins and detach the Reflection Sheet .

5. Remove the 32 Push Rivets .

6. Remove the 8 Terminators and 8 connections and detach the 4 LED8 PWB1 Units and 4 LED8 PWB2 Units .

7. Detach the 4 LED5 PWB1 Units and 4 LED5 PWB2 Units .

8. Disconnect the connecting cords from the 8 connectors of the LED5 PWB1/2 Unit.

9. Detach the Back Light Chassis .

[Link] the 2 Connecting Cord and 2 Ferrite Core .

[Link] the 6 lock screws and detach the LCD Control Unit

Micro Lens Sheet 7

5 Optical Sheet
Lens Sheet 6 Diffusion Plate 8

Panel Chassis
32" LCD Ass'y 4
Panel HIRAKI Unit

Bezel Ass'y 3

LCD Control 23
Unit 24

Back Light
Chassis 20
Ferrite Core 22
Connecting Cord
1 19 21
2 18
14

17

16

15

13
12

Reflection Sheet
Support Pin
10 11
Push Rivet
9

1–1
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
2. Handling notes (32 inch models).
1. Set and connect LED-PWBs.

RUNTKA655WJ01 / WJ02
Top Side RUNTKA658WJ01 / WJ02
INSIDE of
RUNTKA655WJ01 BL-CHASSIS
Top Side RUNTKA658WJ01
RUNTKA655WJ02
RUNTKA658WJ02
RUNTKA655WJ01
RUNTKA658WJ01
RUNTKA655WJ02
RUNTKA658WJ02
RUNTKA655WJ01
RUNTKA658WJ01
RUNTKA655WJ02
RUNTKA658WJ02
RUNTKA655WJ01
RUNTKA658WJ01
RUNTKA655WJ02
RUNTKA658WJ02

Bottom Side (C-PWB side) Bottom Side (C-PWB side)

WIRE HARNESS

Set and connect LED-PWBs *Same for other 7 lines.

RUNTKA655WJ01/02 RUNTKA658WJ01/02

LED-PWB set direction

(arrow mark to harness side)
TERMINATOR
LED-PWB set direction is Attached
(arrow mark to harness side)
Connect LED-PWBs

Boss of
BL-CHASSIS
LED-PWB

Boss fitting Insert the connector horizontally mutually.

(showing in blue circles)
Do not add inadequate power.

2. Peel off the lamination film of LENS SHEET on the both sides.

Peel off the lamination film of LENS SHEET on the both sides.

Peel off the lamination film.

FRONT BACK

1–2
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
3. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (40 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.

1. Remove the 14 lock screws ,12 lock screws and detach the Bezel Ass’y .

2. Remove the 4 Clips and detach the 40” LCD Panel HIRAKI Unit and Panel Chassis Ass’y .

3. Detach the DBEF Sheet and 2 Lens Sheet and Diffusion Plate .

4. Remove the 20 Push Rivets and 8 Support Pins and detach the Reflector Sheet .

5. Detach the 2 Connection Cords .

6. Remove the 42 Push Rivets .

7. Detach the Bush Cap Unit and connecting cords from the 7 Connectors of the LED5-PWB1/2 Unit.

m
8. Remove the 7 Terminators and 14 connections and detach the 8 LED6-PWB1 Units and 6 LED6-PWB2 Units .

9. Detach the 4 LED5-PWB1 Units and 3 LED5-PWB2 Units .

[Link] the Back Light Chassis Ass’y .

[Link] the 2 Ferrite Cores .

.co
[Link] the 6 lock screws and detach the LCD Control Unit .

Diffusion Plate 8

Lens Sheet 7

DBEF Sheet 6

Panel Chassis Ass'y 5

es
40" LCD Panel HIRAKI Unit

3 Bezel Ass'y
uid

14 Bush Cap Unit

22 Back Light Chassis Ass'y

4 Clip 24
LCD Control Unit 25

15
-g

21 17
1 18 19
2 23 Ferrite Core
17
20 12 Connecting Cord
all

19

18

16

13

10 Support Pin

11 Reflector Sheet

9 Push Rivet

1–3
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
4. Handling notes (40 inch models).
1. Set and connect LED-PWBs.

RUNTKA655WJ01 / WJ02 RUNTKA656WJ01 / WJ02 RUNTKA656WJ01 / WJ02

Top Side

INSIDE of
BL-CHASSIS
RUNTKA***WJ01

RUNTKA***WJ02
RUNTKA***WJ01 㧨CAUTION㧪
RUNTKA***WJ02 It being alternated
WIRE HARNESS RUNTKA***WJ01
RUNTKA***WJ01 and RUNTKA***WJ02.

RUNTKA***WJ02

RUNTKA***WJ01

Bottom Side (C-PWB side)

Set and connect LED-PWBs *Same for other lines.

RUNTKA655WJ** RUNTKA656WJ** RUNTKA656WJ**

LED-PWB set direction LED-PWB set direction LED-PWB set direction

(arrow mark to harness side) (arrow mark to harness side) (arrow mark to harness side) TERMINATOR
is Attached

Connect LED-PWBs
Boss of
BL-CHASSIS
LED-PWB

Boss fitting
(showing in blue circles) Insert the connector horizontally mutually.
Do not add impossible power.

2. Peel off the lamination film of LENS SHEET on the both sides.

Peel off the lamination film of LENS SHEET on the both sides.

Peel off the lamination film.

FRONT BACK

1–4
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
5. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (46 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.

1. Remove the 10 lock screws ,16 lock screws and detach the Bezel Ass’y .

2. Remove the 4 Clips and detach the 46” LCD Panel HIRAKI Unit and Panel Chassis Ass’y .

3. Detach the DBEF Sheet and 2 Lens Sheet and Diffusion Plate .

4. Remove the 23 Push Rivets and 11 Support Pins and detach the Reflector Sheet .

5. Detach the 2 Connection Cords .

6. Remove the 48 Push Rivets .

7. Detach the Bush Cap Unit and connecting cords from the 8 connectors of the LED5-PWB1/2 Unit.

8. Remove the 8 Terminators and 16 connections and detach the 4 LED8-PWB1 Units , 4 LED8-PWB2 Units , 4 LED6-PWB1 Units
and 4 LED6-PWB2 Units .

9. Detach the 4 LED5-PWB1 Units and 4 LED5-PWB2 Units .

[Link] the Back Light Chassis .
[Link] the 2 Ferrite Cores .

[Link] the 6 lock screws and detach the LCD Control Unit .

Diffusion Plate 8

Lens Sheet 7

DBEF Sheet 6

Panel Chassis Ass'y 5

46" LCD Panel HIRAKI Unit

3 Bezel Ass'y

14 Bush Cap Unit

24 Back Light Chassis

26
4 Clip
LCD Control Unit 27

15

17
22
20
21 25 Ferrite Core
2 17
1 23
12 Connecting Cord

18

19

16

13

10 Support Pin

11 Reflector Sheet

9 Push Rivet

1–5
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
6. Handling notes (46 inch models).
1. Set and connect LED-PWBs.

RUNTKA655WJ01 / WJ02 RUNTKA656WJ01 / WJ02 RUNTKA658WJ01 / WJ02

Top Side

INSIDE of RUNTKA***WJ01
BL-CHASSIS
RUNTKA***WJ02
RUNTKA***WJ01
㧨CAUTION㧪
RUNTKA***WJ02
It being alternated
RUNTKA***WJ01 RUNTKA***WJ01
WIRE HARNESS and RUNTKA***WJ02.
RUNTKA***WJ02
RUNTKA***WJ01
RUNTKA***WJ02

Bottom Side (C-PWB side)

Set and connect LED-PWBs *Same for other lines.

RUNTKA656WJ** RUNTKA658WJ**
RUNTKA655WJ**

LED-PWB set direction LED-PWB set direction LED-PWB set direction

(arrow mark to harness side) (arrow mark to harness side) (arrow mark to harness side)
TERMINATOR
is Attached

Connect LED-PWBs
Boss of
BL-CHASSIS
LED-PWB

Boss fitting
(showing in blue circles) Insert the connector horizontally mutually.
Do not add impossible power.

2. Peel off the lamination film of LENS SHEET on the both sides.

Peel off the lamination film of LENS SHEET on the both sides.

Peel off the lamination film.

FRONT BACK

1–6
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
7. Removing of Bezel Ass’y, Panel Chassis Ass’y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (52 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.

1. Remove the 12 lock screws ,18 lock screws and detach the Bezel Ass’y .

2. Remove the 6 Clips and detach the 52” LCD Panel HIRAKI Unit and Panel Chassis Ass’y .

3. Detach the DBEF Sheet and 2 Lens Sheets and Diffusion Plate .

4. Remove the 33 Push Rivets and 11 Support Pins and detach the Reflection Sheet .

5. Detach the 2 Connection Cords .

6. Remove the 48 Push Rivets .

7. Detach the Bush Cap Unit and connecting cords from the 8 connectors of the LED6-PWB1/2 Unit.

8. Remove the 8 Terminators and 16 connections and detach the 8 LED8-PWB1 Units and 8 LED8-PWB2 Units .

9. Detach the 4 LED6-PWB1 Units and 4 LED6-PWB2 Units .

[Link] the Back Light Chassis Ass’y .
[Link] the 6 lock screws and detach the LCD Control Unit .

Diffusion Plate 8

Lens Sheet 7

DBEF Sheet 6

Panel Chassis Ass'y 5

52" LCD Panel HIRAKI Unit

14 Bush Cap Unit

22 Back Light Chassis Ass'y

23
3 Bezel Ass'y LCD Control Unit 24
Clip 4 15

20 17
18

19
17
21
12 Connecting Cord
1 2

18

19

16

13

10 Support Pin
11 Reflection Sheet

9 Push Rivet

1–7
 AllLX705E,
LC-32/40/46LE705E/S, LU705E/S, manuals and user guides at [Link]
LC-52LE705E/S
8. Handling notes (52inch models).
1. Set and connect LED-PWBs.

RUNTKA656WJ01 / WJ02 RUNTKA658WJ01 / WJ02 RUNTKA658WJ01 / WJ02

Top Side

INSIDE of RUNTKA***WJ01
BL-CHASSIS
RUNTKA***WJ02
RUNTKA***WJ01
㧨CAUTION㧪
RUNTKA***WJ02
It being alternated
RUNTKA***WJ01 RUNTKA***WJ01
WIRE HARNESS and RUNTKA***WJ02.
RUNTKA***WJ02
RUNTKA***WJ01

m
RUNTKA***WJ02

Bottom Side (C-PWB side)

Set and connect LED-PWBs *Same for other lines.

.co
RUNTKA658WJ** RUNTKA658WJ**
RUNTKA656WJ**

LED-PWB set direction LED-PWB set direction LED-PWB set direction

(arrow mark to harness side) (arrow mark to harness side) (arrow mark to harness side)
TERMINATOR
is Attached
Connect LED-PWBs

Boss of
BL-CHASSIS
es
LED-PWB

Boss fitting
(showing in blue circles) Insert the connector horizontally mutually.
Do not add impossible power.

2. Peel off the lamination film of LENS SHEET on the both sides.
uid

Peel off the lamination film of LENS SHEET on the both sides.
-g

Peel off the lamination film.

all

FRONT BACK

1–8
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
CHAPTER 2. ADJUSTMENT
LC-32LE705E
Service Manual

[1] ADJUSTMENT PROCEDURE

1. Adjustment method after PWB and/or IC replacement due to repair
The unit is set to the optimum at the time of shipment from the factory.
If any value should become improper or any adjustment is necessary due to the part replacement, make an adjustment according to the following pro-
cedure.

1. Procure the following units in order to replace the main unit, IC3302 and IC8401.

MAIN UNIT for service: DKEYDF306FM10

NOTE: [Caution when replacing ICs in the main unit (IC501,IC2002)]
The above ICs are EEPROMs storing the EDID data of PC, and Monitor microcomputer.
Before replacing the relevant part, procure the following parts in which the data have been rewritten.

IC501 RH-iXC697WJQZS PC
IC2002 RH-IXC786WJNAQ Monitor microcomputer

NOTE: [Caution when replacing ICs in the main unit (IC8401,IC3302)]

When replacing either IC8401 or IC3302, exchange MAIN units for DKEYDF306FM10
Each part should not be individually exchanged.

IC8401 RH-IXC147WJQZQ Flash

IC3302 RH-IXC951WJQZQ Main CPU

NOTE: HDMI ROM Writing

After replacing IC1504, execute “HDMI EDID WRITE” on the page 5/17
Please execute it after checking MODEL NAME & INCH SIZE. are correct.
The ROM data based on information of MODEL NAME & INCH SIZE
1) Enter the process adjustment mode in AVC.
2) Use the cursor keys ( / ) and P keys ( / ) of R/C to select the item [HDMI EDID WRITE] on the page 5/17.

2. After replacing the LCD panel or LCD control/MAIN UNIT, check MODEL NAME in the following procedure.
1) Enter the process adjustment mode in AVC.

2) Use the cursor keys ( / ) and P keys ( / ) of R/C to select the item [MODEL NAME] on the page 17/17.
3) Verify that the Model name is displayed.
4) If the Model name doesn't match, select the values of the Model nmae with the VOL(+/-) keys.
5) After selection in Step 4), press the OK key, and it is completed with OK displayed.

3. After replacing the LCD panel or LCD control UNIT, check PANEL_SIZE in the following procedure.
1) Enter the process adjustment mode in AVC.

2) Use the cursor keys ( / ) and P keys ( / ) of R/C to select the item [PANEL_SIZE] on the page 17/17.
3) Verify that the panel size is displayed.
4) If the size doesn't match, select the values of the panel size with the VOL(+/-) keys.
5) After selection in Step 4), press the OK key, and it is completed with OK displayed.

4. After replacing the LCD panel or LCD control PWB, adjust the VCOM in the following procedure.
1) Enter the process adjustment mode.
2) Use the cursor keys ( / ) and P ( / ) of R/C to select the item [VCOM ADJ] on the page 10/17.
3) Press the OK key to verify that the adjustment pattern is displayed.
4) Use the +/- keys of VOL of R/C to adjust the flicker in the center of the screen to minimum.
5) When the optimal state is achieved in Step 4, press the OK key to turn the pattern to OFF.

2–1
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
2. List of adjustment process mode menu
The character string in brackets [ ] will appear as a page title in the adjustment process menu header.

Page Line Item Description Remarks (adjustment detail, etc.)

1/17
1 MAIN Version Main software version.
2 BOOT Version BOOT Version.
3 Monitor Version Monitor software version.
4 T-CON/H.264 Version T-CON/H.264 Version.
5 CPLD Version CPLD Version.
6 LED T-CON Version LED T-CON Version.
7 CI+INFO CI+ Key Information.
8 SECURE BOOT MAIN IC is applied to SECURE BOOT.
9 EQ DATA CHECKSUM Audio data checksum.
10 LAMP ERROR Number of termination due to lamp error.
11 MONITOR ERR CAUSE Last error standby cause.
12 NORMAL STANDBY CAUSE Situation that became standby at the end. (Excluding the error)
13 ERROR STANDBY CAUSE Error standby cause.
2/17
1 INDUSTRY INIT Enter Initialization to factory settings execution.
2 INDUSTRY INIT(-Hotel) OFF Initialization to factory settings execution.(Hotel mode is excluded)
3 PUBLIC MODE OFF Hotel mode ON/OFF setting .
4 Center Acutime 5H 0M Main operating hours.
5 RESET OFF Main operating hours reset.
6 Backlight Acutime 19H 35M Backlight operating hours.
7 RESET OFF Backlight operating hours reset.
8 LAMP ERROR RESET OFF Lamp error reset.
9 ADJ PARAM SET Enter ADJ PARAM SET.
10 VIC XPOS 0 X-coordinate setting for VIC READ.
11 VIC YPOS 0 Y-coordinate setting for VIC READ.
12 VIC SIGNAL TYPE MAIN Signal type setting for VIC READ.
13 VIC READ OFF Picture level acquisition function.
(Level appears in green on the upper right)
3/17
1 RF AGC ADJ Enter RF-AGC auto adjustment execution.
2 TUNER ADJ Enter TUNER auto adjustment execution.
3 PAL+TUNER ADJ Enter PAL TUNER auto adjustment execution.
4 RF AGC 16 RF-AGC auto adjustment execution. (CA-8CH)
5 TUNER ADJ(SMPTE) Enter TUNER auto adjustment execution. (SMPTE)
6 PAL+TUNER ADJ(SMPTE) Enter PAL TUNER auto adjustment execution. (SMPTE)
TUNER ADJ(SMPTE CH57) Enter TUNER auto adjustment execution. (SMPTE CH57)
7 PAL+TUNER ADJ(SMPTE CH57) Enter PAL TUNER auto adjustment execution. (SMPTE CH57)
8 TUNER CONTRAST A_GAIN 14 TUNER signal level adjustment.
9 TUNER CONTRAST D_GAIN 2048 TUNER signal level adjustment.
10 TUNER CONTRAST OFFSET 256 TUNER signal level adjustment.
11 RF AGC READ OFF Reading value of RF-AGC voltage.
4/17
1 PAL ADJ Enter PAL adjustment.
2 SECAM ADJ Enter SECAM adjustment.
3 N358 ADJ Enter N358 adjustment.
4 PAL CONTRAST A_GAIN 14 PAL contrast adjustment.
5 PAL CONTRAST D_GAIN 2048 PAL contrast adjustment.
6 PAL CONTRAST OFFSET 256 PAL contrast adjustment.
7 SECAM CONTRAST A_GAIN 14 SECAM contrast adjustment.
8 SECAM CONTRAST D_GAIN 2048 SECAM contrast adjustment.
9 SECAM CONTRAST OFFSET 256 SECAM contrast adjustment.
10 N358 CONTRAST A_GAIN 14 N358 contrast adjustment.
11 N358 CONTRAST D_GAIN 2048 N358 contrast adjustment.
12 N358 CONTRAST OFFSET 256 N358 contrast adjustment.
5/17
1 HDMI CEC TEST Enter HDMI CEC test.
2 INSPECT USB TERM Enter Reading inspection of USB memory terminal .
3 HDMI EDID WRITE Enter HDMI EDID WRITING.
4 MONIDATA READ[TEMP/OPC] OFF MONITOR Temperature/ OPC Acquisition tool.
5 CAUSE RESET Enter Reset of standby cause .

2–2
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
CHAPTER 3. MAJOR IC INFORMATIONS Service Manual
LC-32LE705E

[1] MAJOR IC INFORMATIONS

1. DESCRIPTION OF MAJOR ICs

Ref No. Name Part Code Description

[MAIN UNIT]
IC8401 RH-iXC721WJQZQ Flash This IC is 1GB NAND flash memory.
This IC stores the software data that processes the system of TV such as the
graphic processing, the LCD controls, and backlights etc.
IC3302 RH-iXC951WJQZQ Main CPU This IC is Video Processor & MAIN CPU.
In this IC, the decode processing and the video signal processing are done.
Moreover, OSD is generated here and added to a picture signal.
IC2002 RH-iXC786WJQZQ UCOM The monitor microprocessor is intended to communicate with the main CPU and to
for service operate the system. It also controls power of the entire system.
(RH-iXC786WJNAQ)
IC3501/ RH-iXC790WJQZQ DDR This IC is 512Mb DDR2 SDRAM.
3502 This IC operates as a memory of IC3302 (Video Processor). ***

3–1
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
— MEMO —

3–2
 All manuals and user guides at [Link]

m
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
CHAPTER 4. OVERALL WIRING/SYSTEM BLOCK DIAGRAM
LC-32LE705E
Service Manual

[1] OVERALL WIRING DIAGRAM

OVERALL WIRING DIAGRAM (LC-32LE705E/S, LU705E/S, LX705E)

.co
J

H
MAIN UNIT for service
(DKEYDF306FM)
es
G

F
uid

QCNW-K269WJQZ
E

C
-g

A
all

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

4–1
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

OVERALL WIRING DIAGRAM (LC-40LE705E/S, LU705E/S, LX705E)

J

RUNTKA642WJQZ
I

MAIN UNIT for service

F (DKEYDF306FM)

E
QCNW-K271WJQZ

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

4–2
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

OVERALL WIRING DIAGRAM (LC-46LE705E/S, LU705E/S, LX705E)

J

RUNTKA643WJQZ

MAIN UNIT for service

(DKEYDF306FM)

QCNW-K273WJQZ

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

4–3
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

OVERALL WIRING DIAGRAM (LC-52LE705E/S)

J

RUNTKA643WJQZ

MAIN UNIT for service

(DKEYDF306FM)
F

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

4–4
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

[2] SYSTEM BLOCK DIAGRAM

SYSTEM BLOCK DIAGRAM (LC-32LE705E/S, LU705E/S, LX705E)

EXT8
MAIN UNIT T-CON UNIT LCD PANEL UNIT
J J505
CVBS/LR
CVBS_IN
CVBS_IN_L/R

EXT1(CVBS/YC/RGB)
SC1_CVBS/Y
SC503
CVBS/LR SC1_IN_L/R
SC1_Y/C

RGB RGB

SC1_V_OUT
TUNER_OUT SLOWSW2
TUNER_OUT_L/R
LR_OUT
SLOWSW1

FS/FB SC1FSW
TA1+/-,TB1+/-,TC1+/-,TCLK1+/-,TD1+/-,TE1+/-,
TA2+/-,TB2+/-,TC2+/-,TCLK2+/-,TD2+/-,TE2+/-

LW(P2601)
IC504

LW(SC4801)
IC507
TUNER OUT MUX PE

(41pin)

(41pin)
I Disclete
MM1506XN MM1507XN
EXT2(CVBS/YC) MUTE TUNER_CVBS_SEL HV_MODE
TU_CVBS_OUT_MUTE

LCD_CONTROLLER
SC2_CVBS/Y
SC502
LCD_PANEL
CVBS/LR SC2_IN_L/R
SC2_Y/C 1920x1080
RGB
SC2_V_OUT
AV_OUT IC508 DET
MONITOR_L/R
LR_OUT MONITOR OUT LCD_EN

LP(P4803)
LP(P2602)
Disclete
FS/ MM1756AU VCOM_SCL/SDA

(15pin)
MUTE
IC2601

(15pin)
AV_LINK AV_LINK VCOM_WP
D3.3V Spliter GSP
SLOWSW2
CVBS_MONI_OUT

SC2_CVBS_Y
SC1_CVBS_Y

CVBS__IN
CVBS_YU_OUT

SLOWSW1

SC2_Y/C
SC1_Y/C
RGB

LVDS_OUT
SC1FSW

PNL_EN
IC8455 HC2G66DP
EXT3(COMP/AUD) M24C64WN
EXE_LED1 PNL_IC2_EN GCK

J503/503 COMP_YPbPr EEPROM

CVBS BYPASS
H YPbPr/LR
COMP_IN_L/R
PNL_ROM_EN
PNL_WP

PL(P4804)
COMP_YPbPr

(4pin)
X4401
27MHz PNL+12V
SP CI_CEB, CI_RB
SP_L P2701
SPK_OUT IC2701 IC4405 CI_CNT_RESET
SP AMP
CI Controller TS_CPU_IN
SP_R YDA148QZ X3302
MT8295 TS_CPU_OUT 27MHz
IC4401/2/3 LA1(CN7006) LA2(CN7007)
(12pin) (6pin)
OUTPUT(AUDIO) Disclete Buffer
MONITOR_L/R
J50 MUTE [Link](400Hz) IC9611
X1101
AUDIO_OUT LCX244FT
DVBC 27MHz Spliter
Disclete SDA1.SCL1 HC2G66DP
G MUTE
SC4401 IC3302
CI_D[7:0] /CI_A[14:0] IC1106
CI Digital AV decode OFL1
CIEN,CIDET
FE_RST
Demodulator
(COMMON IC2007
TS_CI_OUT IXC951WJQZQ VON
INTERFACE) DVB-C SW.
TS_CI_IN X2001 X2002 AHC1G08W
(CN7604) (CN7601/7602)
IFAGC STV0297E 20MHz 20MHz

GSP VSYNC

D3.3V GCK HSYNC

EXE_LED
IC1102 DVB-C SEL STB SCLC/SIN/SOUT
IF_DEMIX EXE_LED
OFL1 OFL U7702
D_IF IN P/N STB STB U7701

LB(CN7008)
LB(P9602)
LV4053FT LED DRIVER

(9pin)
DET_POW2_PNL12V
D_IF IN P/N LED DRIVER IR2E59
AV_LINK
TUNER_CVBS AV_LINK_O
DET_SYNC
SCL/SDA BL
SCL/SDA BL CONTROLER

(9pin)
TU1101 TUNER_CVBS AV_LINK_I DET_SYNC
TUNER LCMXO1200
IFAGC IC3501
F SIF
SIF IXC790WJ CEC_LINE CEC_I12 ERROR
V13CTL

1066Mbit LAMP_ERR LAMP_ERR

TUNER_SDA/SCL CEC_O12 ERR_PNL BL_ON
DDR2
SPK_OUT_L/R
ANT_5V_SW ANT_POW
J504 TUNER_OUT_L/R
HP_PLUG LNB_SHORT LNB_SHORT
MONITOR_OUT_L/R Reset
HP HP_L/R MUTE_A_ALL MUTE_A_ALL
HP_L/R
IC3502
CVBS_IN_L/R IXC790WJ I2C1_SCL IC2002 (CN7603)
IC2004 I2C1_SDA
SC1_IN_L/R 1066Mbit S24C508J MONITOR_MICON
DIGITAL SC2_IN_L/R DDR2 EEPROM
AUDIO_OUTPUT
W_PROT_M IXC786WJ
COMP_IN_L/R
PNL_POW PNL_POW
D520 BU+3.3V
GPFSV51V OPT_OUT IC503 PS_ON
SPDIF_OUT OPT_OUT IC2001 SM_POW
OPT OUT S80927NM RESET AC_DET
MUTE T7SET08 RESET AC_DET

E UCOM_RST

PL(CN7004)
EXT4/6 J501
PNL_12V

(4pin)
HDMI2/PC
PC/HDMI_L/R
AUDIO(R/L) PC/HDMI_L/R RXD/TXD_DBCG
(MINI_PLUG) CNVss AMP13V
CNVss CNVss POWER_SUPPLY 3.3V

BUSY/CE/EPM/SCLK CIRCUIT
CPU_UARXD2_UCOM
CPU_UATXD2_UCOM

EXT4 SC501 PC_RGB RS_BUF_CNT POW13V BACK-UP_SYSTEM

PC_RGB RS_BUF_CNT RXD/TXD DET_POW1_13V
CPU_UARXD0_RS
CPU_UATXD0_RS

BU+5V
ANALOG_RGB PC_H/Vsync PC_H/Vsync BU+3.3V 3.3V
N_CPU_RST

(PC) D3.3V
SW_TMDS_CLKP/N PM_REQ,CBOOTS DET_POW3_D3V3
PD(CN7003)

IC501 IC2008 MAIN_SYSTEM

PDD[0:7]

EEPROM SW_TMDS_D0P/N 7WH126FU D5V

USB

D3.3V
(12pin)

BR24C21F SW_TMDS_D1 SW. D_POW D_POW

S+8V
PD(P9601)

IC506 SW_TMDS_D2 S+13.5V

D1.8V
M3221EIP-1Y
(12pin)

TH2001 CPU1.2V UR+13.5V

RS-232C RS232C TxRx
RXD/TXD_CPU QSTEMP D1.05V
etc. BU+5V
D IC8452
CPU_RXD_UCOM
CPU_TXD_UCOM
LCX157FT

PS_ON
AC-DET
STBY_POW
SW PM_REQ,CBOOTS POW_SW
EXT8 SC1501 KEY2 BU5V 13V
IC8454 KEY2
HDMI_3 KEY1
HDMI-4 AHC1G08W N_SRESET KEY1
LED_OPC

DDC_3 N_SRESET
SW 156V
LED_G
LED_R

BU+5V 13V 156V

OPC
RC

IR_PASS
EXT7 SC1505
HDMI_4
POWG_LED
POWR_LED

HDMI-3 IC1504
LED_OPC

DDC_4 D5V
OPC

SII9287
R/C

TMDS_Rx/ I2C_SINK
IC8401
EXT6 SC1503
HDMI-SW IXC147WJQZQ
ILL_LED Q2002
DDC_1 512Mbit RN4901
C HDMI-2 FLASH SW.
BU+3.3V STBY_CONV. MAIN_CONV.
HDMI_1 OPT+3.3V
IC2009
TC7SH00U
IR_SW.
EXT5 SC1502

DDC_2
HDMI-1

HDMI_2

PFC
CEC_LINE CONTROL
J3301 USB_DP/N

USB IC3301 RA(P2003) KM(P2002)

LINE REG (10pin) (4pin)
BD6538G

B
NOISE_FILTER

IM(P201) IM(P101) RA(P102) KM(P151)

(2pin) (2pin) (10pin) (5pin)

S151 S154 S157

D102 CH-UP VOL-UP POWER
OPC IC101
BU3.3V OPC
D103 SENSOR
OPC+3.3V

S152 S155
BU+3.3V

TVPOW R
CH-DOWN VOL-DOWN

G/B
RMC101
IR S153 S156
A ICON UNIT RECEVER INPUT MENU
AC_INLET
SA(CN7001)
(3pin) POWER_UNIT

R/C, LED UNIT

KEY UNIT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

4–5
 All manuals and user guides at [Link]

m
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

SYSTEM BLOCK DIAGRAM (LC-40LE705E/S, LU705E/S, LX705E)

EXT8
J J505 CVBS_IN MAIN UNIT T-CON UNIT LCD PANEL UNIT
CVBS/LR
CVBS_IN_L/R

EXT1(CVBS/YC/RGB)
SC1_CVBS/Y
SC503
CVBS/LR SC1_IN_L/R
SC1_Y/C

RGB RGB

.co
SC1_V_OUT
TUNER_OUT SLOWSW2
TUNER_OUT_L/R
LR_OUT
SLOWSW1

FS/FB SC1FSW
TA1+/-,TB1+/-,TC1+/-,TCLK1+/-,TD1+/-,TE1+/-,
TA2+/-,TB2+/-,TC2+/-,TCLK2+/-,TD2+/-,TE2+/-

LW(SC4801)
LW(P2601)
IC504 IC507
PE

(41pin)

(41pin)
TUNER OUT MUX
I Disclete
MUTE MM1506XN MM1507XN
EXT2(CVBS/YC) TUNER_CVBS_SEL HV_MODE
TU_CVBS_OUT_MUTE

LCD_CONTROLLER
SC502
SC2_CVBS/Y LCD_PANEL
CVBS/LR SC2_IN_L/R
SC2_Y/C 1920x1080
RGB
SC2_V_OUT
AV_OUT IC508 DET
MONITOR_L/R
LR_OUT MONITOR OUT LCD_EN

LP(P4803)
LP(P2602)
Disclete
FS/ MUTE MM1756AU VCOM_SCL/SDA

(15pin)
(15pin)
AV_LINK AV_LINK IC2601 VCOM_WP
D3.3V Spliter GSP
RGB
SLOWSW2
CVBS_MONI_OUT

SC2_CVBS_Y
SC1_CVBS_Y

LVDS_OUT

PNL_EN
SC2_Y/C
SC1_Y/C

CVBS__IN
CVBS_YU_OUT

SLOWSW1
SC1FSW

IC8455 HC2G66DP
EXT3(COMP/AUD) M24C64WN
EXE_LED1 PNL_IC2_EN GCK

J503/503 COMP_YPbPr EEPROM

CVBS BYPASS
YPbPr/LR PNL_ROM_EN
H COMP_IN_L/R
PNL_WP

PL(P4804)
COMP_YPbPr
X4401

(4pin)
27MHz PNL+12V
SP CI_CEB, CI_RB
SP_L P2701
SPK_OUT IC2701 IC4405 CI_CNT_RESET

SP AMP CI Controller TS_CPU_IN

X3302
SP_R YDA148QZ
MT8295 TS_CPU_OUT 27MHz
LA1(CN7606) LA2(CN7607)
IC4401/2/3 (10pin) (10pin)
OUTPUT(AUDIO) MONITOR_L/R Disclete
J50 MUTE Buffer [Link](400Hz) IC9611
X1101
AUDIO_OUT LCX244FT
DVBC 27MHz Spliter
Disclete SDA1.SCL1 HC2G66DP
MUTE
es
G SC4401
CI_D[7:0] /CI_A[14:0] IC1106 IC3302
CI Digital AV decode OFL1
CIEN,CIDET
FE_RST
Demodulator
(COMMON
INTERFACE) TS_CI_OUT DVB-C IXC951WJQZQ VON IC2007
SW.
TS_CI_IN
STV0297E X2001 X2002 AHC1G08W (CN7604) (CN7601/7602)
IFAGC 20MHz 20MHz

GSP VSYNC

D3.3V GCK HSYNC

IC1102 DVB-C SEL
EXE_LED STB SCLC/SIN/SOUT
OFL1 OFL U7802
IF_DEMIX EXE_LED
D_IF IN P/N STB STB U7801 LED DRIVER

LB(CN7605)
LB(P9602)
(9pin)
LV4053FT D_IF IN P/N DET_POW2_PNL12V
LED DRIVER IR2E59
AV_LINK
TUNER_CVBS AV_LINK_O
DET_SYNC
SCL/SDA BL
SCL/SDA BL CONTROLER
DET_SYNC

(9pin)
TU1101 TUNER_CVBS AV_LINK_I LCMXO1200
TUNER
IFAGC IC3501
V13CTL
SIF
SIF
IXC790WJ CEC_LINE CEC_I12
F TUNER_SDA/SCL
1066Mbit
CEC_O12 ERR_PNL
LAMP_ERR LAMP_ERR ERROR
BL_ON
DDR2
SPK_OUT_L/R
ANT_5V_SW ANT_POW
J504 TUNER_OUT_L/R
HP_PLUG LNB_SHORT LNB_SHORT
MONITOR_OUT_L/R Reset
HP HP_L/R MUTE_A_ALL MUTE_A_ALL
HP_L/R
IC3502
CVBS_IN_L/R IXC790WJ I2C1_SCL IC2002 (CN7603)
SC1_IN_L/R 1066Mbit IC2004 I2C1_SDA
MONITOR_MICON
DIGITAL SC2_IN_L/R DDR2
S24C508J
EEPROM
AUDIO_OUTPUT
W_PROT_M IXC786WJ
COMP_IN_L/R
PNL_POW PNL_POW
D520 BU+3.3V
GPFSV51V OPT_OUT IC503 PS_ON
SPDIF_OUT OPT OUT OPT_OUT IC2001 SM_POW
S80927NM RESET AC_DET
T7SET08 RESET AC_DET
MUTE

UCOM_RST
EXT4/6
uid

E J501

PL(CN7503)
PNL_12V
HDMI2/PC
PC/HDMI_L/R

(4pin)
AUDIO(R/L) PC/HDMI_L/R RXD/TXD_DBCG
(MINI_PLUG) 3.3V
CNVss AMP13V
CNVss CNVss POWER_SUPPLY
BUSY/CE/EPM/SCLK CIRCUIT
CPU_UARXD2_UCOM
CPU_UATXD2_UCOM

EXT4 SC501 PC_RGB RS_BUF_CNT POW13V

BACK-UP_SYSTEM
PC_RGB RS_BUF_CNT RXD/TXD DET_POW1_13V BU+5V
CPU_UARXD0_RS
CPU_UATXD0_RS

PC_H/Vsync BU+3.3V
ANALOG_RGB PC_H/Vsync 3.3V
N_CPU_RST

(PC) DET_POW3_D3V3 D3.3V MAIN_SYSTEM

IC501 SW_TMDS_CLKP/N PM_REQ,CBOOTS
PD(P9601)

IC2008
PDD[0:7]

SW_TMDS_D0P/N D5V
EEPROM 7WH126FU D3.3V PD(CN7501)
USB

(12pin)

BR24C21F SW_TMDS_D1 SW. D_POW D_POW S+8V

S+13.5V
(12pin)
IC506 SW_TMDS_D2 D1.8V
M3221EIP-1Y TH2001 CPU1.2V UR+13.5V
RS-232C RS232C TxRx D1.05V
RXD/TXD_CPU QSTEMP etc. BU+5V
CPU_RXD_UCOM
IC8452 CPU_TXD_UCOM
D LCX157FT

PS_ON
AC-DET
STBY_POW
SW PM_REQ,CBOOTS POW_SW
EXT8 SC1501 KEY2 BU5V 13V
IC8454 KEY2
HDMI_3 KEY1
HDMI-4 AHC1G08W N_SRESET KEY1
LED_OPC

DDC_3 N_SRESET
SW
LED_G
LED_R

204V
BU+5V 13V 204V
OPC
RC

IR_PASS
EXT7 SC1505
HDMI_4
POWG_LED
POWR_LED

HDMI-3 IC1504
LED_OPC

DDC_4 D5V
OPC

SII9287
R/C

TMDS_Rx/ I2C_SINK
IC8401
EXT6 SC1503
HDMI-SW IXC147WJQZQ
DDC_1 512Mbit ILL_LED Q2002
RN4901
HDMI-2 FLASH SW. STBY_CONV.
BU+3.3V MAIN_CONV.
HDMI_1
C IC2009
TC7SH00U
OPT+3.3V

IR_SW.
EXT5 SC1502

DDC_2
HDMI-1

HDMI_2

PFC
CEC_LINE CONTROL
-g

J3301 USB_DP/N

USB IC3301 KM(P2002)

RA(P2003)
LINE REG
(10pin) (4pin)
BD6538G

NOISE_FILTER
B

IM(P201) IM(P101) RA(P102) KM(P151)

(2pin) (2pin) (10pin) (5pin)

S151 S154 S157

D102 CH-UP VOL-UP POWER
OPC IC101
BU3.3V OPC
D103 SENSOR
OPC+3.3V

S152 S155
BU+3.3V

TVPOW R
CH-DOWN VOL-DOWN

G/B RMC101
IR S153 S156
ICON UNIT RECEVER INPUT MENU
AC_INLET
SA(CN7002)
(3pin) POWER_UNIT
A R/C, LED UNIT
KEY UNIT
all

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

4–6
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

SYSTEM BLOCK DIAGRAM (LC-46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S)

EXT8
J J505 CVBS_IN MAIN UNIT T-CON UNIT LCD PANEL UNIT
CVBS/LR
CVBS_IN_L/R

EXT1(CVBS/YC/RGB)
SC1_CVBS/Y
SC503
CVBS/LR SC1_IN_L/R
SC1_Y/C

RGB RGB

SC1_V_OUT
TUNER_OUT
TUNER_OUT_L/R SLOWSW2
LR_OUT
SLOWSW1
FS/FB SC1FSW
TA1+/-,TB1+/-,TC1+/-,TCLK1+/-,TD1+/-,TE1+/-,
TA2+/-,TB2+/-,TC2+/-,TCLK2+/-,TD2+/-,TE2+/-
IC504

LW(P2601)
IC507

LW(SC4801)
PE
I TUNER OUT MUX

(41pin)

(41pin)
Disclete
MUTE MM1506XN MM1507XN
TUNER_CVBS_SEL HV_MODE
EXT2(CVBS/YC) TU_CVBS_OUT_MUTE

LCD_CONTROLLER
SC2_CVBS/Y
SC502
CVBS/LR SC2_IN_L/R LCD_PANEL
SC2_Y/C 1920x1080
RGB
SC2_V_OUT
AV_OUT IC508 DET
MONITOR_L/R
LR_OUT MONITOR OUT LCD_EN

LP(P2602)

LP(P4803)
Disclete
VCOM_SCL/SDA
FS/ MUTE MM1756AU
IC2601

(15pin)
AV_LINK AV_LINK VCOM_WP

(15pin)
D3.3V Spliter GSP
SLOWSW2
SLOWSW1

RGB
CVBS_MONI_OUT

SC2_Y/C
SC1_Y/C

CVBS__IN

LVDS_OUT
CVBS_YU_OUT

SC2_CVBS_Y
SC1_CVBS_Y
SC1FSW

PNL_EN
IC8455 EXE_LED1 HC2G66DP
EXT3(COMP/AUD) PNL_IC2_EN GCK
M24C64WN
J503/503 COMP_YPbPr EEPROM
CVBS BYPASS
H YPbPr/LR COMP_IN_L/R PNL_ROM_EN
PNL_WP

PL(P4804)
COMP_YPbPr
X4401
SP 27MHz PNL+12V

(4pin)
P2701 CI_CEB, CI_RB
SP_L
SPK_OUT IC2701 CI_CNT_RESET
SP AMP IC4405
TS_CPU_IN
SP_R YDA148QZ CI Controller X3302
TS_CPU_OUT 27MHz
MT8295 LA1(CN7606) LA2(CN7007) LA3(CN7008)
IC4401/2/3
(10pin) (10pin) (6pin)
OUTPUT(AUDIO) Disclete
MONITOR_L/R Buffer
J50 MUTE [Link](400Hz) IC9611
AUDIO_OUT LCX244FT
DVBC X1101 Spliter
27MHz
Disclete SDA1.SCL1 HC2G66DP
G MUTE
SC4401 IC3302
CI_D[7:0] /CI_A[14:0] IC1106
CI CIEN,CIDET Demodulator Digital AV decode OFL1
(COMMON FE_RST
INTERFACE) TS_CI_OUT
DVB-C IXC951WJQZQ VON IC2007
SW.
(CN7601/7602)
TS_CI_IN X2001 X2002 AHC1G08W
STV0297E 20MHz 20MHz (CN7604)
IFAGC

GSP VSYNC

D3.3V EXE_LED GCK HSYNC

IC1102 DVB-C SEL STB
IF_DEMIX OFL1 OFL U7802 U7803
EXE_LED U7801
D_IF IN P/N STB STB LED DRIVER LED DRIVER

LB(CN7605)
LB(P9602)
LV4053FT LED DRIVER

(9pin)
D_IF IN P/N DET_POW2_PNL12V
IR2E59 IR2E59
TUNER_CVBS
AV_LINK AV_LINK_O SCL/SDA BL CONTROLER
DET_SYNC DET_SYNC SCL/SDA BL

(9pin)
TU1101 TUNER_CVBS AV_LINK_I LCMXO1200
TUNER IC3501 SCLC/SIN/SOUT
IFAGC
V13CTL
F SIF
SIF
IXC790WJ
1066Mbit
CEC_LINE CEC_I12
LAMP_ERR ERROR
LAMP_ERR
TUNER_SDA/SCL CEC_O12 ERR_PNL BL_ON
SPK_OUT_L/R
DDR2
ANT_5V_SW ANT_POW
J504 TUNER_OUT_L/R
HP_PLUG LNB_SHORT LNB_SHORT
MONITOR_OUT_L/R Reset
HP HP_L/R MUTE_A_ALL MUTE_A_ALL
HP_L/R
IC3502
CVBS_IN_L/R IXC790WJ I2C1_SCL IC2002
IC2004
1066Mbit I2C1_SDA
SC1_IN_L/R S24C508J MONITOR_MICON (CN7603)
DIGITAL DDR2 EEPROM
AUDIO_OUTPUT
SC2_IN_L/R W_PROT_M IXC786WJ
COMP_IN_L/R
PNL_POW PNL_POW
D520 BU+3.3V
GPFSV51V OPT_OUT IC503 PS_ON
SPDIF_OUT OPT_OUT IC2001 SM_POW
OPT OUT S80927NM RESET AC_DET
T7SET08 RESET AC_DET
MUTE

PL(CN7003)
UCOM_RST
EXT4/6 J501
HDMI2/PC PNL_12V

(4pin)
PC/HDMI_L/R
AUDIO(R/L) PC/HDMI_L/R RXD/TXD_DBCG
(MINI_PLUG) CNVss AMP13V
CNVss CNVss POWER_SUPPLY 3.3V

BUSY/CE/EPM/SCLK CIRCUIT
CPU_UARXD2_UCOM
CPU_UATXD2_UCOM

EXT4 SC501 PC_RGB RS_BUF_CNT POW13V

BACK-UP_SYSTEM
PC_RGB RS_BUF_CNT RXD/TXD DET_POW1_13V BU+5V
CPU_UARXD0_RS
CPU_UATXD0_RS

PC_H/Vsync BU+3.3V
ANALOG_RGB PC_H/Vsync 3.3V
N_CPU_RST

(PC) SW_TMDS_CLKP/N DET_POW3_D3V3 D3.3V MAIN_SYSTEM

PM_REQ,CBOOTS

PD(CN7001)
PD(P9601)

IC501 IC2008 D5V

PDD[0:7]

SW_TMDS_D0P/N
EEPROM 7WH126FU D3.3V
USB

SW_TMDS_D1

(12pin)
SW. D_POW S+8V
(12pin)

BR24C21F D_POW
IC506 SW_TMDS_D2 D1.8V S+13.5V
M3221EIP-1Y CPU1.2V
TH2001 UR+13.5V
RS-232C RS232C TxRx
RXD/TXD_CPU
D1.05V
QSTEMP etc. BU+5V
CPU_RXD_UCOM

D IC8452
LCX157FT
CPU_TXD_UCOM

PS_ON
AC-DET
STBY_POW
SW PM_REQ,CBOOTS POW_SW
EXT8 SC1501 KEY2 BU5V 13V
IC8454 KEY2
HDMI_3 KEY1
HDMI-4 AHC1G08W N_SRESET KEY1
LED_OPC

DDC_3 N_SRESET
SW 228V
LED_G
LED_R

BU+5V 13V 228V

OPC
RC

IR_PASS
EXT7 SC1505
HDMI_4
POWG_LED
POWR_LED

HDMI-3
LED_OPC

IC1504 D5V
DDC_4
OPC
R/C

SII9287 TMDS_Rx/ I2C_SINK

IC8401
EXT6 SC1503
HDMI-SW IXC147WJQZQ ILL_LED Q2002
DDC_1 512Mbit RN4901
HDMI-2 FLASH SW.
BU+3.3V STBY_CONV. MAIN_CONV.
C HDMI_1
IC2009 OPT+3.3V
TC7SH00U
IR_SW.
EXT5 SC1502

DDC_2
HDMI-1

HDMI_2

PFC
CEC_LINE CONTROL
J3301 USB_DP/N

USB IC3301 RA(P2003) KM(P2002)

LINE REG (10pin) (4pin)
BD6538G

B NOISE_FILTER

IM(P201) IM(P101) RA(P102) KM(P151)

(2pin) (2pin) (10pin) (5pin)

S151 S154 S157

D102 CH-UP VOL-UP POWER
BU3.3V
OPC IC101
OPC
D103 SENSOR
OPC+3.3V

S152 S155
BU+3.3V

TVPOW R
CH-DOWN VOL-DOWN

G/B RMC101
IR S153 S156
ICON UNIT AC_INLET
SA(CN7002)
RECEVER INPUT MENU
(3pin) POWER_UNIT
A
R/C, LED UNIT
KEY UNIT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

4–7
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

CHAPTER 5. PRINTED WIRING BOARD ASSEMBLIES
LC-32LE705E
Service Manual

[1] MAIN Unit

MAIN Unit (Side A)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

5–1
 LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

21
20
FB9605
LUG9604 LUG9608 LUG9605
C9640
C9638

C9641
D9612

IC9610

SC1504 L9606
SC8452 IC9606

19
R9631
Q9601
IC9607

C9637
SG1532
SG1530 SG1531
SG1529 SG1528
SG1526 SG1527

R9629
Q9602
R9686
SG1525

Q9604

R8455
C1120 C1115 IC9609
FB9604

C9660
C9634
C8455

IC8401

C8456

C9631
C1117

IC1103

C1116

IC1104 L9602 C9639

D9611

IC9605
R1106

R8453 C1148 X1101 C1147 C1159

TH2001
TH2002
R2019

R8470 FB9606

18
R9630

C9647
R1140

L1102
R9619

C9649
R9628 C9651
IC1101 L9604
D9613

IC1102
R1128
IC9602

IC9608

P9601
FB9601

C1130
C1106
C1108
C1133
C1131

R1103
C1107
C1109
R1104

C1129 R9640
R1127 R1122 R1133
C1124 R9638
R1139 R1137 IC1106 C1123
R1138 R1136 R1125 R1126 R1120
D1103 C1156 C1132
R1111 C1125
D1104 C1155 C9654
R1110 R1108
FB9607
R1132
R4448

17
R1147
R4431

R1148

FB9603

C9625
C9623 FB9602
R2021
C9622
R1130

C1114 R1105
C9621
R4461
R4432

C1165

IC9604
R4458
R4433

16
R4440

R9621
R9620
R4439

R9603
C4424 D9610
R4403

IC4405

P9603
R4452 R4451
C4414

X4401

C1113
R4402

C1167 R1154 R1149

C4425

L9605
R4401

R4416
R4463
R4462
R4442

C1141
Q1106 Q1107

R9604
R4414

C1140
R1112
R1115

15
R4443

R1114
R4419
R4459
R4450

Q1104
C9663
R1113
C1138 R1116 R9687
All manuals and user guides at [Link]

R4444

C9661

C1101

P9602
C9659

IC9611

IC9601
R4417 C9664
C1103
R4406 C9657

R9678
C1534

C9655
R1565

D1517

C1173
L1504 R1526
IC9603

14
SC1505

L1503 C1102

C2602
IC1506

C1105
L1502 FB2611

IC3303

IC2601
R2632
L1501
FB2617
R8486 R2634
FB2614
R3309 R2638
D3301 FB2612
C3321

P2602
IC8455 IC8402 R2604

C3323
R1509

C3310

C3308
R1514 FL3302

R1541

13
R1527
FL3301

R3308
R1516
R1584 R8485 R8457
IC1504

R1519
R1524 Q8472
D3316 D3308 D3321 D3311

R1543 R1582
R8484

C1524 R1550
R3363 C3372 C3376 R3367

C3377
R3366

C3331

C3326
R3395
D512

C1525
D515

R3364 C3374 C3503

C3378
C1531
R1539
IC501 R1536 R1537
LUG9603
R3372 C3385

D3306
D3315

D3317
D3323
R1558

C3394 R3381
C3393 R3380
C3395 R3382
C3396 R3383
C3397 R3384
C3379 R3368
Q1509 C3383
R1559

LUG9607
R3321 R3322
R3305 R3379 C3392
R551
C521
R3306

R2073

12
R547

R3323
R549

C3309 R3378 C3391

R636

R507

R3370 C3382
D510
R3512
IC3301

R3371 C3384
C3302

R538
C3304

R583
FB507
FB535
R3501
R533 FB506
C3306 R3377 C3390
FL503 IC1503
D509

IC3502
FB3302

C3370
C3367
R625 FB505

SC1502

SC1503
VA3302 VA3301

D508 R3346

X3302
R633
FL502

IC1502
R522

L3301

C3371
R3342
P3301

FB504

5–2
FB534 R3345
D507 R587 R506

11
R3508
FB3301

R637
FL501

R3506
IC3302
FB533
R505

R3502 R3507
R585
R3511
R1564

D3303

D3309

D3326

D3319

D3328

D3314
R1518

D3325

D3320

D3324

D3329

C3301
D1510

R3353

R3354

R3358

R3357

R3362

R3359
R1560

R3361

R3360

R3355

R3356
D1505

IC3501
C3398

C3399

C3405

C3404

C3403

C3406

10
C1507

C3402

C3407

C3400

C3401
R1561

R584
R635

R3347
R3348
R3350
R3349
R8512
R8514
SC1501

R8515
R8520

C3347
R8516
R8521

C590
R501

L504
R629
C550
IC1501

R3343
R3344
FB530 C501

FB502
R8513
R511

C583
FL514

R624
R632
R517
R523
C510
R8519 R8511 C588
R8522 R8523

R3314
R8518 R581 R582

L2601
IC8501 C502 R524

IC507

C585
C8509
R8507
R8508
R8509 D8504

FB503

C562
R512 C508
R638

L2606
R8506 D8503 R8505 C8506 C8508

R514

9
R641
R8517 R586

C581
L502

L2602
R647
C551
X8501
R502 C589 C561 R592 C555

D522
R8504
R8503
R8502
R8501

R630
C553
R3351

L2604
R615
FB531 C563

C582

R596

D530
IC505
IC504 IC503

P2601
C8503
C8501
R649

L2603
C574
R602
L503

L501
FL515

Q505
R640
R623

C573
D8502

D8501
L8502 L8501 R644

L2605
FL517

C587
C592
R648
C552
R598

C557 R626
IC508 FB2621

R2016
C591
R599 FB2622

C2014

C2015
R2051 FB2623

R589
FB2624
FB2625

D521
C593

8
FB2626

R631 C556
R597 R595 R503 IC2008 FB2627
FB2628
FB532 FB2629
D2003 FB2630

R530

R513
C2026 FB2631
R531 R2041

R2606 R2607
FL516
C503 VA506 VA502 R526 R2605

P2603
C507 VA501

IC2002
R518 FL508 FL507
FL510 R2035
VA507 R532
R536 R534

R2059
R539 Q2004
FL509 FB501 P2001

FB524
FB509

Q2003

R2042
R519
R540 D504

C8502
D511
C565

7
R2062
R2063
D8456

D8455
R8479
C8471
C8470
R8473
R600 R516
R545 VA503 R542
R601 R2028
C517

VA508

R2064
C2039
C8469 R8478
FL511 FL504 R2045 R2053 R2034 R2036
R543 IC8454
D8457

R535
R527 C519 X2002

R2725

P2002
R537
R603

C8468
R639
D501

R8476
R8477
R8483
R8482
D8454
C2009
R605 D514 C2710

X2001
R541 R509 C2011 D2705
C566
R521 R2043

C564
R550
VA504

FB526
R528 C2719 C2725 C2720 C2728
FL512

C8458
VA509
R8465 R8469
D503 D506
FL505 R8454
R546

C2734
R504 R508 R515 R520

R2039
C2730
FB2701

L2701

L2704

6
D505 D513
R2710 R2720 C2715

R8466
VA510 C2705
FB508 FB510

C511

R2088

R2729
C520
FL506 IC8451 IC8452

R2706
R2708
FB2702
FL513 R567

R8452
C567 C538 R529 FB513
C560 C559 D2702 R2709 C2713 C2717 C2723 FB2703
R564 R2701

R606
R594 R548 VA505 C524

C2738
R2724

C8457
C532

D2706
R557 C2706 R2721
R593 FB521

R8468

R8467
R2714

Q2703
R510
R544 FB518 C528

C2708

C2731 C2732

C2735 C2736
R2718 FB2704

R525
R3312 R562 C2711
R568 R2716

IC2701
R634 FB528 C2714
C539 R563 R2717 FB2705

Q506

D527

Q2702
C2704 C2712

C2709
R610
C571
R611
R565 C529 C2726

Q507

P2701
FB520 D502 R2722
C554 C558 C533 R558 R612 C2729

D2703
C569

R2705
R2707
R643 C548 C2707
R591 FB511 FB517 FB516 C525 R614 R2719

C2739
R578 FB2706
R590 FB522 R607 FB514 C570 D2701 R2715

R2704
C2716 C2724
C549 FB512 FB515

Q508
R619

5
R580 R621 FB2707
C523 C522 R618 C2737
R579 C527 C526 R2723
R588 R604

C576
Q509

C568

R553

R552
FB2708

L2702

L2703
R556

R559
R2017

D526

R3325
R576 R2012 C2733
C531 C530 C537 C536 C2036

R3316
R3313
R622

D2008
R574 R642 Q2002
R555 R554 R561 R560

C2035
C2034
C2033
C2032
C2031
C2025
C546 C575
R575 C2718 C2722 C2721 C2727

C534

C535

C540

C541
C547

R617
C572
R616
FB519 D2704
R571 R569 R570 R566 FB529 P2003
LUG9602

R2730

LUG9601

4
MAIN Unit (Chip Side A)

3
2
1
G
H

C
E

A
F
J

I
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

MAIN Unit (Side B)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

5–3
 LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

21
20
R8481
R9657
R9658

R9656

R9641 C9629
C9620
C9646 R8487
C9618
C9627 R9639

19
R1540
D1528

C9652
C9616
C9632
C9636

D9601 R9614 R9626

R1547

IC1505
R9642

R9649 R1538
FB1510

R9607 R9643 D9609 R9624 D9608

R9610
C9602

R9647
R9644

C1526 R1545 R1544 C1521

C9601

R8451
C9662

R9601

R9616
R9615

R8458

FB1509
FB1508
FB1507
FB1506
FB1504
C9644

D1525

R9623 R9602 C9617

C9650
C9648

R9637 C9626
R1535

D9614 C9614
D1523 R1501
C9658
C9624 R9635

C9611
R8459
Q1105

R9682

C9656 D1524 D1522 D1521

C9628

R9652 C9643 C9635 D1105

18
C1150 R9683
R1131

C9633 C1127
C9606

C1111

D9602 R9612 D9603

C1137
R9672
R9671

FB1102
C9642 R9648

R9625
R9622
C9605

C9630
C1104
R9670
R9673

C1128

C1139
C1142
C1144
C1149
C1151
C1152

R1129
C1126 R1107

D9604 R9613 D9605 R1134

C9645
R9650

R1142

C1136
R1109
R1146
R1145
R1143
R1144

C1158
C1135
D9616

R1141
D9615

FB9608
C1134 C1157

Q4401
C1143

C1146

R4466
IC4402

R4468

17
Q9610

C4422
C9666
R9605

C4407
C9603

R4404
Q9608

R4445
R4421
C1118

R4418
R4430 IC4401
L1108
R1153

R4467
C9619 R4429
R9634 C9615

R9633 R4438
C1166

C4406
R9632 C9612 C4421 R4441
C4409
C1172

C4419

C4405
R4465

R4420

16
C4420
C4418

C4426
D9607

L1104

L1107

R4424 FB4402
C4412
R1152

FB4405
FB4401
R9617

C4403
C1110

C1112

R4435
D1101

FB4404
C4401
C4404

C4410
C4411
C4417
R4449

IC4403
D9606

R4456 R4412
R4428 R4427

R4469
R4415 R4455

C4408
R4457
C4402
C1153 R1121

IC4404
L1103

C1154

C4416
C4415
C9610

C9609

C9607

R4453

R1124 R1135
C4413
R1123
R1117
R1119

R4436
FB4403

15
R1118
R9636

R9646 R9645 C1145 R4454 R4434

R9669 Q9607
R9651

Q9609

R4447
FB3305

R9685 R1101 R1102

All manuals and user guides at [Link]

R9676 R9679
Q1101
Q1102

R9666

R4446
m R9677 R9664
R9665
C9613
C9665
C1171 R1151
L1101

R9675

R1510

R1508
L1106 R4405
C4423
C9608

D1502
D1516
Q1103

C1160

14
C9604
R2631
R2639 IC1107
R2630 C3316
R3328

FB2610 R2620
R2613
R8472

R2633
C1161 D1102
FB2616
.co
R1502
R2637
FB2613 R8480
C8451 C8460 C3318
FB3303
R2640 C3319
C8453
C8452

C8461
C8462
R8463
R8461

C3315 R1529
C1527

C1517
C1515
R8474

C1528 C1529 R1530

FL3303 C1512
R8464
R8462

Q1504

13
Q1505

R1528
R1513
C1511
C1522
C3320
R3320
R3310

R1556 R1555
R8456 FB3304 C3327 C3328 R1548
C1510

R1553
C3325 C3330
FB3308 D1529

R1554

Q1506
C1513 Q1507
R3311

C1523

C1514
D3312

R1517

C1518
C1516
C3373 R1531

R1549

R628
D1530
R3396 R1546 C1530

D1526

R1532
C1519 R1551
R1542 C1520

IC509
R1557
R1552

R627
R3375 C3388
R3374 C3387
R3373 C3386
R3376 C3389

D1527
C3303
D3322 Q1508
FL3304 D3304
C3305

C3307

D1507
R3329 D3327
FL3502

12
FB1512 D1506

R1504
C3375 R3365

R3352
D3307 R1503

R1506

R1522
R1505
D3305

C3346
C3335

C3523 R3307
D3310
R3390

C3357

D3330
C3355
D1504 D1503
C3521

C3524
C3522

D3318 D1509

D1501
C3342 D1508

R1511

C1509
C3337

C1508
R3336
C3408

R1512
R3389
C3329

R3335 C3364 D3313 R1507 D1512

C3354
R3333
C3501 C3516
C3517

R3332
R3327
R3337 C3381 R3369
es
R3509 C3518 C3519 C3520
R3510 C3359
C3515 C3380
C3502 C3356
C3322

5–4
C3345
C3525

C3348
C3340 C3324

11
D3501 C3343

R3334 C3360 C3362 C3365

C3313 C3334

C3341
C3338
R3505

C3352 C3361
C3344

C3312
R3504 C3314
C3363
R3503

C3339
C3311 C3366 R3319
FB3307

C3349
C3369 R3341

R3318
R3317
X3301
C3368

C3333

R3302
R3301
C3332

C3358
C3350

FB3306
R3340

C3351
R3303

C3336
C3514

C3353
C3512
C3513

R3304
C3511

C3510

R3324
C3317

10
FL3501 C3505

R4413

D1511
C3509
C3506 C3508
C3504
C3507 C8510 R8510
uid
R3391 C8504 C8512

R4425
R4410

R4464

FB8503
R4407

R4437
R4423
R4409
FB8501

R4422
R4426
R4411 R4460
FB8502 C8507

C8505
R4408 C8511

9
R3315
R2641
R2642
R2643
R2616
R2615
R2617

R2033
R2618

R2602
R2056

IC2006
R2619
R2621

R2070
R2057
R2032
R2623

8
R2624 C2007
R2625 R2087 R2086

R2601
R2626 R2050
R2627 R2004

R2037
R2001
R2006
R2628 C2008 R2071
R2629 IC2007 R2024
R2635
R2603

R2023

R2612
C2022
C2024

Q2603
R2079

R2608
R2038 R2611

R2025

R2030
R2014
R2068

R2072
R2020
R2636

R2003
Q2006 Q2001

C2002
R2011 IC2001
IC2004

R2018
R2007
-g
C2003
C2012
C2010 D2009
R2061

7
R2026
R2027
R2048
C2013
R2044

R2013
R2084
R613

R2078
R2077
C2038
R2058
R2076
R2005
C2037
R9681
R2060

D523
C2017

C2018
R2066
C2020
R2031 R2015 FB523

Q2005
R2002
FB2001 R2074 R2049
R2047 IC2009 IC2003 FB525
R2065

C2016 C2005
R2046 R2022

D524
FB2004 C2029
R609
C2028
FB2003 R2009 C2021 C2001

R2726
D525 FB527
FB2002 R2008 R2010
R2069 C2027 C2004 R608
R2067

R2029
all
D2007
C577

R620
R2054
C2006 C578
R2040

6
R2052
IC2005 IC506
C2702

R2712 R2727
C580 C584 C586

R2711

R2703
R2085
C579

IC2010

C2030
C2703 D2001
R2728 R2713

Q2701
Q2704

R2702

5
C2701

R2075

C2019 FB2005
C2023

FB2013

FB2009
FB2012
FB2011

FB2007
FB2014
FB2010

FB2008

FB2006

R3326
D2707 D517 D519
C544 C542

R577

R572

R573
Q503 Q504 Q501 D528 Q502 D529

R646

R645
C545
D516 D518 C543

4
MAIN Unit (Chip Side B)

3
2
1
G
H

C
E

A
F
J

I
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

CHAPTER 6. SCHEMATIC DIAGRAM
LC-32LE705E
Service Manual

[1] DESCRIPTION OF SCHEMATIC DIAGRAM

1. VOLTAGE MEASUREMENT CONDITION:
1) The voltages at test points are measured on exclusive AC adaptor and the stable supply voltage of AC 220-240V. Signals are fed by a color bar signal gen-
erator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.

2. INDICATION OF RESISTOR & CAPACITOR:

RESISTOR
1) The unit of resistance "Ω" is omitted.
(K=kΩ=1000Ω, M=MΩ).
2) All resistors are ± 5%, unless otherwise noted.
(K= ± 10%, F= ± 1%, D= ± 0.5%)
3) All resistors are 1/16W, unless otherwise noted.
CAPACITOR
1) All capacitors are µF, unless otherwise noted.
(P=pF=µµF).
2) All capacitors are 50V, unless otherwise noted.

CAUTION:
This circuit diagram is original one, therefore there may be a slight
difference from yours.

SAFETY NOTES:
1) DISCONNECT THE AC PLUG FROM THE AC OUTLET
BEFORE REPLACING PARTS.
2) SEMICONDUCTOR HEAT SINKS SHOULD BE REGARDED AS
POTENTIAL SHOCK HAZARDS WHEN THE CHASSIS IS
OPERATING.

IMPORTANT SAFETY NOTICE:

PARTS MARKED WITH " "( ) ARE IMPORTANT
FOR MAINTAINING THE SAFETY OF THE SET. BE SURE TO
REPLACE THESE PARTS WITH SPECIFIED ONES FOR MAIN-
TAINING THE SAFETY AND PERFORMANCE OF THE SET.

6–1
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

[2] SCHEMATIC DIAGRAM
1. MAIN Unit-4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

6–2
 All manuals and user guides at [Link]

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

2. MAIN Unit-11

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

6–3
PartsGuide All manuals andLC-32/40/46LE705E/S,
user guides at [Link]
LU705E/S, LX705E, LC-52LE705E/S

PARTS GUIDE
No. SX9D1LC32L705

LCD COLOUR TELEVISION

LC-32LE705E/S, LC-32LU705E/S
LC-32LX705E
LC-40LE705E/S, LC-40LU705E/S
Note:
The reference numbers on the PWB
LC-40LX705E
are arranged in alphabetical order. LC-46LE705E/S, LC-46LU705E/S
LC-46LX705E
MODELS LC-52LE705E/S
CONTENTS
[1] PRINTED WIRING BOARD [9] LCD PANEL MODULE UNIT
ASSEMBLIES (LC-46LE/LU/LX705)

[2] LCD PANEL [10] CABINET AND MECHANICAL

PARTS (LC-52LE705)
[3] DKEYDF306FM10 (MAIN Unit)
[11] LCD PANEL MODULE UNIT
[4] CABINET AND MECHANICAL (LC-52LE705)
PARTS (LC-32LE/LU/LX705)
[12] SUPPLIED ACCESSORIES
[5] LCD PANEL MODULE UNIT
(LC-32LE/LU/LX705) [13] PACKING PARTS
(NOT REPLACEMENT ITEM)
[6] CABINET AND MECHANICAL (LC-32/40LE/LU/LX705)
PARTS (LC-40LE/LU/LX705)
[14] PACKING PARTS
[7] LCD PANEL MODULE UNIT (NOT REPLACEMENT ITEM)
(LC-40LE/LU/LX705) (LC-46LE/LU/LX705, LC-52LE705)

[8] CABINET AND MECHANICAL [15] SERVICE JIGS

PARTS (LC-46LE/LU/LX705) (USE FOR SERVICING)

Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and performance of the set.

This document has been published to be used

for after sales service only.
The contents are subject to change without notice.
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY

[1] PRINTED WIRING BOARD ASSEMBLIES

N DKEYDF306FM10 CD N P MAIN Unit (DUNTKF306FM10)
N DUNTKE266FM18 AR P KEY Unit
N DUNTKF308FM02 AL P R/C, LED Unit
N DUNTKF314FM02 AL P ICON Unit
! N RUNTKA619WJQZ BS P POWER Unit (for 32 inch model)
! N RUNTKA642WJQZ P POWER Unit (for 40 inch model)
! N RUNTKA643WJQZ P POWER Unit (for 46/52 inch model)
N RUNTK4225TPZU BR N P LCD Control Unit
N RUNTKA655WJ01 AU N J LED5-PWB1 Unit (for 32/40/46 inch model)
N RUNTKA655WJ02 AU N J LED5-PWB2 Unit (for 32/40/46 inch model)
N RUNTKA656WJ01 AW N J LED6-PWB1 Unit (for 40/46/52 inch model)
N RUNTKA656WJ02 AW N J LED6-PWB2 Unit (for 40/46/52 inch model)
N RUNTKA658WJ01 AX N J LED8-PWB1 Unit (for 32/46/52 inch model)
N RUNTKA658WJ02 AX N J LED8-PWB2 Unit (for 32/46/52 inch model)
[2] LCD PANEL

m
N DLCUCA001FM03 DL P 32"LCD Panel Module Unit (for 32 inch model)
N DLCUCA002FM07 DS N P 40"LCD Panel Module Unit (for 40 inch model)
N DLCUCA003FM07 DR N P 46"LCD Panel Module Unit (for 46 inch model)
N DLCUCA004FM07 DU N P 52"LCD Panel Module Unit (for 52 inch model)
[3] DKEYDF306FM10 (MAIN Unit)

.co
IC2002 RH-iXC786WJNAQ J IC R5F364A6NFB (Monitor Micon)
IC8401 Not Available - - IC K9F1208U0C-PCB0 *PWB replacement item
IC3302 Not Available - - IC MT5391DWCJ (MAIN CPU) *PWB replacement item
es
uid
-g
all

2
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[4] CABINET AND MECHANICAL PARTS (LC-32LE/LU/LX705)

䎗䎕 䎗䎖
䎤
䎃 䎜
䎔䎔 䎧
䎃

䎔䎓
䎪 䎗䎖
䎃
䎖䎕䎅䎃䎯䎦䎧䎃䎳䏄䏑䏈䏏䎃䎰䏒䏇䏘䏏䏈䎃䎸䏑䏌䏗 䏍 䏈
䎃 䎃 䏉 䏊 䎗䎕
䎃 䎃
䏅
䎩
䎃 䎔䎜
䎕䎛 䎃
䎔䎐䎔
䏆
䎃
䎥 䎖
䎔䎐䎔䎕 䎃 䎜 䎭
䎕䎖 䎃
䎔䎐䎔䎕
䎦 䎗䎐䎕
䎔䎐䎔䎕 䎃 䎗䎐䎔 䎕䎜 䎮䎨䎼䎃䎸䏑䏌䏗
䎔䎐䎛 䎔䎐䎔䎔 䎥
䎥 䎃 䎖䎐䎕
䎔䎐䎕
䎃 䎬䎦䎲䎱䎃䎸䏑䏌䏗 䎗 䎖䎐䎖 䎖䎐䎔
䎔䎐䎜 䏄
䎔䎐䎔䎓 䎔䎐䎔䎔 䎕䎘
䎃 䏋 䎗䎓 䎜
䎔䎐䎕䎐䎖
䎃
䎔䎐䎙 䎦
䎃 䎕䎓 䎖䎓 䎖䎔
䎔䎐䎕䎐䎕 䏋
䎃 䎥
䎔䎐䎗 䎤
䎃 䎵䎒䎦䎏䎃䎯䎨䎧䎃䎸䏑䏌䏗
䎔䎐䎕䎐䎔 䎃
䎤
䎔䎐䎕䎐䎗 䎖䎙
䎃 䎭 䎨
䎕䎐䎔 䎃
䎔䎐䎖 䎃 䎕䎐䎕
䎕 䎨
䎔䎐䎕䎐䎘
䎔 䎔䎐䎔䎖 䎃
䎔䎐䎚
䎕䎐䎖

䎙 䎨
䎃 䎕䎐䎘
䎕䎐䎙 䎕䎐䎗
䎙
䎨
䎔䎖 䎛 䎕䎐䎙
䎃 䎕䎐䎘 䎖䎚
䎛
䎤
䏌 䎖䎜 䎪 䎖䎜
䎖䎜 䎃
䎃 䎃
䎖䎜
䎧 䎪
䎔䎓
䏎䎃 䎗䎔 䎃
䎃 䎔䎛 䎔䎙
䏇 䎖䎗
䎔䎕 䎃
䏌 䏇
䎳䎲䎺䎨䎵䎃䎸䏑䏌䏗 䎃 䎃 䎖䎘 䎘
䎕䎔
䎖䎜 䎔䎚 䎔䎗
䎚 䎔䎘 䎘䎐䎕
䎕䎙 䎕䎗 䎘䎐䎖
䏍
䎃 䎖䎜 䎘䎐䎔
䎕䎕 䎖䎜
䎔䎗
䏊
䎃 䏅
䏉 䎃
䎃 䏆 䎖䎘
䎃䎩
䏄
䎃
䎃 䎕䎚
䎰䎤䎬䎱䎃䎸䏑䏌䏗

3
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[4] CABINET AND MECHANICAL PARTS (LC-32LE/LU/LX705)

1 CCABAC371WJ15 BK N P Front Cabinet Ass'y (LC-32LE705)
1 CCABAC371WJ14 BK N P Front Cabinet Ass'y (LC-32LU705)
1 CCABAC371WJ18 BK P Front Cabinet Ass'y (LC-32LX705)
1-1 Not Available - - Front Cabinet
1-2 Not Available - - Front Decoration Ass'y (LC-32LE705)
1-2 Not Available - - Front Decoration Ass'y (LC-32LU705)
1-2 Not Available - - Front Decoration Ass'y (LC-32LX705)
1-2-1 HBDGBA070WJSA AF J SHARP Badge
1-2-2 Not Available - - Center Decoration (LC-32LE705)
1-2-2 Not Available - - Center Decoration (LC-32LU705)
1-2-2 Not Available - - Center Decoration (LC-32LX705)
1-2-3 Not Available - - Front Decoration
1-2-4 Not Available - N - Tape 5*3
1-2-5 Not Available - N - Double Tape, x4
1-3 Not Available - - LED Decoration
1-4 Not Available - - Diffusion Sheet
1-6 Not Available - - Double Tape
1-7 Not Available - - Tape : 30*10
1-8 Not Available - - Tape : 60*10
1-9 XEBS730P08000 AA J Screw for Decoration, x4
1-10 Not Available - N - Himeron, x2
1-11 Not Available - N - Himeron, x5
1-12 Not Available - N - Tape : 185*18, x3
1-13 TLABZB406WJZZ AC P ECO Label
2 CCABBB619WJ11 BG P Rear Cabinet Ass'y
2-1 Not Available - - Rear Cabinet
2-2 Not Available - - Terminal Label
2-3 Not Available - - VESA Angle Top, x2
2-4 Not Available - - VESA Angle Bottom, x2
2-5 Not Available - - Himeron, x2
2-6 XEBS730P08000 AA J Screw for VESA Angle, x4
3 CBTN-A844WJ11 AH P Control Button Ass'y
3-1 Not Available - - Control Button Label
3-2 Not Available - - Control Button
3-3 Not Available - N - Spacer, x2
4 CCOVAD472WJ11 AK P Bottom Cover Ass'y
4-1 Not Available - - Bottom Cover
4-2 Not Available - - Reflect Sheet
5 CANGKC375WJ01 AL P Side Terminal Angle Ass'y
5-1 Not Available - - Side Terminal Label
5-2 Not Available - - Side Terminal Angle
5-3 Not Available - - Heat Protect Sheet
6 LANGKC345WJFW AN P Support Angle, x2
7 LHLDQA001WJ1A AF P ECO Switch Holder
8 LHLDWA289WJKZ AC N J Wire Holder, x3
9 LHLDWA175WJUZ AC J Wire Holder, x5
10 LHLDWA176WJUZ AC J Wire Holder for FFC, x2
11 LHLDWA280WJKZ AC N J Wire Holder
12 LHLDZA587WJKZ AC J PWB Spacer, x4
13 LX-WZA066WJKZ AB P Washer
14 NSFTZA284WJFW AC J Shaft for D-SUB, x4
15 PMLT-A608WJZZ AB P Gasket:8x16x5.5
16 PSLDMB665WJFW AM P MAIN Shield
17 QCNW-J895WJQZ AG P Connecting Cord (PD)
18 QCNW-J915WJQZ AG P Connecting Cord (LB)
19 QCNW-H324WJQZ AE P Connecting Cord (KM)
20 QCNW-J805WJQZ AF P Connecting Cord (RA)
21 QCNW-K028WJQZ AD P Connecting Cord (PL)
22 QCNW-K269WJQZ AS N P Connecting Cord (LW)
23 QCNW-J893WJQZ AF P Connecting Cord (SP)
24 QCNW-J809WJQZ AF P Connecting Cord (LP)
25 QCNW-J837WJQZ AD P Connecting Cord (IM)
26 QCNW-J996WJQZ AU P Connecting Cord (AS)
27 QEARPA339WJFW AB P Earth Plate
28 RSP-ZA391WJZZ AP J Speaker-L
29 RSP-ZA392WJZZ AP J Speaker-R
30 TLABNC117WJZZ AA P Model Label
31 TLABK0023TAZZ AA J BAR CODE LABEL
34 XBBS730P04000 AA J Screw (for Tuner)
35 XBPS730P06000 AA J Screw (for HDMI), x4
36 XEBS730P08000 AA J Screw (for SCART)
37 XEBS740P16000 AA P Screw (for Front/Rear Cabinet), x4
39 XHPS730P06WS0 AA J Screw (for PWB/Support Angle), x18
40 XHPS730P10WS0 AA P Screw (for Rear Cabinet/LCD), x8
41 XWHS735-05120 AA P Washer
42 PCUSGA079WJZZ AA P Spacer, x2
43 XEBS740P12000 AD J Screw, x2

4
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[5] LCD PANEL MODULE UNIT (LC-32LE/LU/LX705)

䎔䎐䎔䎛
䎔䎐䎖䎓

䎔䎐䎔䎜
䎔䎐䎕䎓
䎔
䎔䎐䎕䎔

䎔䎐䎕䎕

䎔䎐䎕䎖

䎔䎐䎕䎘

䎔䎐䎕䎗
䎔䎐䎜
䎔䎐䎕䎜 䎔䎐䎕
䎔䎐䎕䎙
䎔䎐䎖 䎔䎐䎘
䎬 䎔䎐䎗
䎃 䎔䎐䎔
䎔䎐䎕䎛
䎔䎐䎕䎚 䎔䎐䎚
䎔䎐䎔䎗 䎫
䎫 䎃
䎔䎐䎖 䎔䎐䎙
䎃
䎔䎐䎛 䎔䎐䎚
䎬 䎔䎐䎙
䎔䎐䎔䎖
䎃
䏎
䎃

䎔䎐䎔䎘
䎔䎐䎔䎔
䎔䎐䎔䎘

䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎓
䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎕
䎔䎐䎔䎘
䎔䎐䎔䎚
䎔䎐䎔䎚 䎔䎐䎔䎙
䎔䎐䎔䎘
䎔䎐䎔䎘
䎔䎐䎔䎘

䎔䎐䎔䎚
䎔䎐䎔䎘 䎔䎐䎔䎚 䎔䎐䎔䎘 䎬䏑䏖䏈䏕䏗䎃䎳䎸䎶䎫䎃䎵䎬䎹䎨䎷䎋䎖䎕䎃䏏䏒䏆䏄䏗䏌䏒䏑䏖䎌
䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎬䏑䏖䏈䏕䏗䎃䎳䎸䎶䎫䎃䎵䎬䎹䎨䎷䎋䎔䎙䎃䏏䏒䏆䏄䏗䏌䏒䏑䏖䎌䎃䏄䏑䏇 䎔䎐䎔䎚 䎬䏑䏖䏈䏕䏗䎃䎶䎸䎳䎳䎲䎵䎷䎃䎳䎬䎱䎃䎋䎗䎃䏏䏒䏆䏄䏗䏌䏒䏑䏖䎌
䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 2st. 䎔䎐䎔䎚 䎔䎐䎔䎘

1st. 䎔䎐䎔䎚 䎔䎐䎔䎘 䎔䎐䎔䎘 1st.

PUSH RIVET
䎔䎐䎔䎘 䎔䎐䎔䎚

2st. 䎔䎐䎔䎚 䎔䎐䎔䎘

Fasten LED-PWBs with PUSH RIVETs x 32
䎔䎐䎔䎘 䎔䎐䎔䎘

䎔䎐䎔䎘 䎔䎐䎔䎘 䎔䎐䎔䎘

Insert PUSH RIVET.

LED-PWB
In the insertion place (32places),
Insert SUPPORT PIN. there is a circle marking
4 locations by silk-screen printing on LED-PWB.
Insert PUSH RIVET.
䎔䎐䎔䎚
16 locations
䎔䎐䎔䎘
Insert it well to the depths.
Not being float.

SUPPORT PIN PUSH RIVET

5
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[5] LCD PANEL MODULE UNIT (LC-32LE/LU/LX705)

1 DLCUCA001FM03 DL P 32" LCD Panel Module Unit
1-1 PRDARA787WJZZ BA P Back Light Chassis
1-2 LHLDWA284WJKZ AC J Bush Base
1-3 LHLDWA280WJKZ AC N J Wire Holder, x2
1-4 RUNTK4225TPZU BR N P LCD Control Unit
1-5 XHPS730P06WS0 AA J Screw, x6
1-6 QCNW-H089WJQZ AG N J Connecting Cord, x2
1-7 RCORFA061WJZZ AG J Ferrite Core, x2
1-8 QCNW-J644WJQZ AN N P Wire Harness
1-9 CHLDWA285WJ01 AC J Bush Cap Unit
1-10 RUNTKA658WJ01 AX N J LED8 PWB1 Unit, x4
1-11 RUNTKA658WJ02 AX N J LED8 PWB2 Unit, x4
1-12 QCNCWA958WJZZ AD N J Terminator, x8
1-13 RUNTKA655WJ01 AU N J LED5 PWB1 Unit, x4
1-14 RUNTKA655WJ02 AU N J LED5 PWB2 Unit, x4
1-15 LHLDZB497WJKZ AC N J Push Rivet, x48
1-16 PMiR-A284WJZZ AS N P Reflection Sheet
1-17 LHLDZB496WJKZ AC N J Support Pin, x4
1-18 PCOVUA183WJZZ AU N P Diffusion Plate
1-19 PSHEPA973WJZZ AZ N P Lens Sheet
1-20 PSHEPA963WJZZ BD N P Optical Sheet
1-21 CHLDZB528WJ01 AW N P Panel Chassis Ass'y
1-22 R1LK315D3FZE2Y N P 32" LCD Panel HIRAKI Unit
1-23 CANGKC321WJ01 AL P Bezel Ass'y (Top)
1-24 CANGKC326WJ01 AM N P Bezel Ass'y (Bottom)
1-25 CANGKC327WJ01 AH N P Bezel Ass'y (L)
1-26 CANGKC328WJ01 AH N P Bezel Ass'y (R)
1-27 LX-EZA028WJF9 AB J Screw, x10
1-28 LX-HZA039WJF7 AB J Screw, x10
1-29 TLABN2229TPZZ AA J Bar Code Label
1-30 PSHEPB013WJZZ AT N P Micro Lens Sheet

6
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[6] CABINET AND MECHANICAL PARTS (LC-40LE/LU/LX705)

䎤 䎖䎚
䎃 䎚

䎧 䎨
䎃 䎃
䎜

䎔䎗
䎖䎛
䎪
䏍 䎃
䎃
䏈 䏊 䎔䎓
䎔䎐䎛 䎃 䏉 䎃
䎗䎓䎅䎃䎯䎦䎧䎃䎳䏄䏑䏈䏏䎃䎰䏒䏇䏘䏏䏈䎃䎸䏑䏌䏗 䎃 䎖䎚 䏅
䎃

m
䎕䎛 䎩
䎃 䎚 䎔䎜
䎥 䏆䎃
䎜 䎗䎙
䎃 䎃
䎔䎐䎛 䎔䎐䎘 䎖
䎭

.co
䎦 䎕䎖
䎔䎐䎙 䎃
䎃
䎮䎨䎼䎃䎸䏑䏌䏗
䎥 䎔䎐䎚 䎗䎐䎕 䎗䎐䎔 䎕䎜 䎜
䎃
䎥
䎃 䎖䎐䎕 䎖䎐䎔
䎔䎐䎛 䏄 䎗
䎦 䎬䎦䎲䎱䎃䎸䏑䏌䏗
䎃 䏋 䎕䎘
䎃
䎃 䎗䎔
䏋
䎔䎐䎕䎐䎖 䎃
es
䎕䎓
䎔䎐䎕䎐䎔 䎥 䎖䎓
䎔䎐䎗 䎖䎔
䎃
䎔䎐䎕䎐䎗 䎭 䎤
䎤 䎃 䎃
䎵䎒䎦䎏䎃䎯䎨䎧䎃䎸䏑䏌䏗
䎔䎐䎖 䎃
䎔 䎔䎐䎔 䎕
䎖䎚
uid

䎔䎐䎕䎐䎕 䎔䎐䎕 䎔䎐䎜

䎕䎐䎕
䎖䎛 䎗䎔
䎔䎗 䎔䎔

䎙 䎖䎛 䎕䎐䎖
䎔䎗
䎨
䎃 䎙䎐䎖 䎙䎐䎖
-g

䎗䎔 䎙䎐䎕 䎙䎐䎔 䎗䎔
䎨 䎕䎐䎔 䎖䎘
䎙䎐䎖 䎗䎗
䏌 䎃 䎙䎐䎔
䎃 䎪
䎙䎐䎕 䎔䎔
䎃 䎖䎜
䎧 䎖䎙
䎙䎐䎔 䎙 䎗䎔
䏎 䎤
all

䎪 䎃
䎃 䎃䎃 䎗䎕
䎖䎙 䎃 䎔䎙
䎔䎕 䎙䎐䎖
䎛 䏇 䎖䎗 䎖䎘
䎃 䎗䎘
䏌 䏇 䎙䎐䎔 䎗䎖
䏍 䎕䎙 䎃 䎃 䎔䎛 䎔䎖 䎘
䎃 䎕䎔
䎳䎲䎺䎨䎵䎃䎸䏑䏌䏗 䎔䎚
䎔䎘
䎗䎕 䏈 䎘䎐䎕
䎃 䎘䎐䎖
䎕䎗

䎗䎔 䎘䎐䎔
䎗䎔
䎔䎖
䏊 䏉
䎃 䎃 䏅
䎕䎕
䎃 䏆 䎖䎘
䎩䎃
䏄
䎃
䎃 䎰䎤䎬䎱䎃䎸䏑䏌䏗 䎕䎚

7
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[6] CABINET AND MECHANICAL PARTS (LC-40LE/LU/LX705)

1 CCABAC372WJ15 BM N P Front Cabinet Ass'y (LC-40LE705)
1 CCABAC372WJ14 BM N P Front Cabinet Ass'y (LC-40LU705)
1 CCABAC372WJ18 BM P Front Cabinet Ass'y (LC-40LX705)
1-1 Not Available - - Front Cabinet
1-2 Not Available - - Front Decoration Ass'y (LC-40LE705)
1-2 Not Available - - Front Decoration Ass'y (LC-40LU705)
1-2 Not Available - - Front Decoration Ass'y (LC-40LX705)
1-2-1 HBDGBA070WJSA AF J SHARP Badge
1-2-2 Not Available - - Front Decoration
1-2-3 Not Available - - Center Decoration (LC-40LE705)
1-2-3 Not Available - - Center Decoration (LC-40LU705)
1-2-3 Not Available - - Center Decoration (LC-40LX705)
1-2-4 Not Available - N - Tape 5*3
1-3 Not Available - - LED Decoration
1-4 Not Available - - Diffusion Sheet
1-5 Not Available - - Front Cabinet Spacer, x2
1-6 Not Available - - Double Tape, x3
1-7 XEBSN40P10000 AB J Screw for Decoration, x6
1-8 Not Available - N - Double side tap, x5
1-9 TLABZB406WJZZ AC P ECO Label
2 CCABBB618WJ11 BH N P Rear Cabinet Ass'y
2-1 Not Available - - Rear Cabinet
2-2 Not Available - - Terminal Label
2-3 Not Available - - Rear Cabinet Spacer, x2
3 CBTN-A844WJ11 AH P Control Button Ass'y
3-1 Not Available - - Control Button Label
3-2 Not Available - - Control Button
4 CCOVAD464WJ11 AM N P Bottom Cover Ass'y
4-1 Not Available - - Bottom Cover
4-2 Not Available - - Reflect Sheet
5 CANGKC375WJ01 AL P Side Terminal Angle Ass'y
5-1 Not Available - - Side Terminal
5-2 Not Available - - Side Terminal Angle
5-3 Not Available - - Heat Protect Sheet
6 CANGKC424WJ02 AT P Support Angle Ass'y, x2
6-1 Not Available - - VESA Bracket, x2
6-2 Not Available - - Support Angle
6-3 XHPS730P06WS0 AA J Screw for VESA Bracket, x4
7 LANGKC480WJFW AB N P Side Lug, x2
8 LHLDQA001WJ1A AF P ECO Switch Holder
9 LHLDWA175WJUZ AC J Wire Holder, x4
10 LHLDWA176WJUZ AC J Wire Holder
11 LHLDWA289WJKZ AC N J Wire Holder, x3
12 LHLDZA587WJKZ AC J PWB Spacer, x2
13 NSFTZA284WJFW AC J Shaft for D-SUB, x4
14 PCUSGA079WJZZ AA P Screw Cushion, x6
15 PMLT-A608WJZZ AB P Gasket:8x16x5.5
16 PSLDMB665WJFW AM P MAIN Shield
17 QCNW-J903WJQZ AK J Connecting Cord (PD)
18 QCNW-J917WJQZ AK J Connecting Cord (LB)
19 QCNW-J979WJQZ AE P Connecting Cord (KM)
20 QCNW-J805WJQZ AF P Connecting Cord (RA)
21 QCNW-G178WJQZ AG J Connecting Cord (PL)
22 QCNW-K271WJQZ AT N P Connecting Cord (LW)
23 QCNW-J901WJQZ AH P Connecting Cord (SP)
24 QCNW-J712WJQZ AF P Connecting Cord (LP)
25 QCNW-J838WJQZ AF J Connecting Cord (IM)
26 QCNW-J996WJQZ AU P Connecting Cord (AS)
27 QEARPA339WJFW AB P Earth Plate
28 RSP-ZA391WJZZ AP J Speaker-L
29 RSP-ZA392WJZZ AP J Speaker-R
30 TLABNC117WJZZ AA P Model Label
31 TLABK0023TAZZ AA J Bar Code Label
34 XBBS730P04000 AA J Screw for Tuner
35 XBPS730P06000 AA J Screw for HDMI, x4
36 XBPS730P06WS0 AA J Screw for ECO Switch
37 XEBS730P08000 AA J Screw, x5
38 XEBS740P12000 AD J Screw for Front Cabinet/LCD, x6
39 XEBS740P16000 AA P Screw for Front/Rear Cabinet, x5
41 XHPS730P06WS0 AA J Screw for PWB/Support Angle, Rear Cabinet/LCD, x33
42 XWHS735-05120 AA P PWB Washer, x2
43 PCLiCA004WJKZ AC J Rivet
44 PFLT-A079WJZZ AD P FELT 20*70
45 PSLDMB651WJZZ AC P Condutr :10X60
46 PSPAZC409WJZZ AC N P Gum Cushion

8
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[7] LCD PANEL MODULE UNIT (LC-40LE/LU/LX705)

1 1-20

1-22
1-24

1-26

1-18

1-19

1-33
1-28
1-34
1-23

1-21 1-8
1-27 1-29 1-1 1-2

1-25
1-4
1-7
1-3
a

1-32 b
a
1-11 1-9 1-6
1-31 1-12
1-30
1-13 b
1-5
1-10

1-16 1-15

1-15

1-13
1-15

1-15 1-12
1-15 1-15
1-17
1-15
1-15 1-14
1-15 1-15

1-17
1-17 1-17
1-15
1-15 1-15 Insert PUSH RIVET (42 locations)
1-17 1-15
1-15
1-17
1-17

1-15 1-15 1-15 1-15 1-15 1-15 1-15 1-15

1-15
1-15 1-15 1-15 1-15 1-15 1-15 1-15

1-17
1-15 1-15 1-15 1-15 1-15 1-15

1-15 1-15 1-15 1-15 1-15 1-15 1-15

1-15 1-15 1-15 1-15 1-15 1-15

1-15 Insert PUSH RIVET (20 locations) and 1-17 Insert SUPPORT PIN (8 locations) 1-15 1-15 1-15 1-15 1-15 1-15

Insert PUSH RIVET. 1-15 1-15 1-15 1-15 1-15 1-15

20 locations
1-15 1-15 1-15 1-15 1-15

1-17 1-15 1-17 1-15 1-17

PUSH RIVET Fasten LED-PWBs with PUSH RIVETs x 42
1-15 1-15 1-17 1-15

1-15 1-15 1-15 PUSH RIVET

1-15
1-15 1-15 1-17 1-15

1-17 1-17 1-15 1-15 1-17 Insert SUPPORT PIN. Insert PUSH RIVET. In the insertion place (48 places),
1-15 1-15 1-15 8 locations there is a circle marking
1-17 LED-PWB by silk-screen printing on LED-PWB.

Insert it well to the depths.

SUPPORT PIN Not being float.

9
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[7] LCD PANEL MODULE UNIT (LC-40LE/LU/LX705)

1 DLCUCA002FM07 DS N P 40" LCD Panel Module Unit
1-1 CRDARA848WJ01 BD N P Back Light Chassis
1-2 LHLDWA284WJKZ AC J Bush Base
1-3 RUNTK4225TPZU BR N P LCD Control Unit
1-4 XBPS730P06WS0 AA J Screw, x6
1-5 QCNW-H089WJQZ AG N J Connecting Cord, x2
1-6 RCORFA061WJZZ AG J Ferrite Core, x2
1-7 QCNW-K251WJQZ AQ N J Wire Harness
1-8 CHLDWA285WJ01 AC J Bush Cap Unit
1-9 LHLDWA280WJKZ AC N J Wire Holder, x3
1-10 RUNTKA655WJ01 AU N J LED5 PWB1 Unit, x4
1-11 RUNTKA655WJ02 AU N J LED5 PWB2 Unit, x3
1-12 RUNTKA656WJ01 AW N J LED6 PWB1 Unit, x8
1-13 RUNTKA656WJ02 AW N J LED6 PWB2 Unit, x6
1-14 QCNCWA958WJZZ AD N J Terminator, x7
1-15 LHLDZB497WJKZ AC N J Push Rivet, x62
1-16 PMiR-A275WJZZ AV N P Reflector Sheet
1-17 LHLDZB496WJKZ AC N J Support Pin, x8
1-18 PCOVUA185WJZZ AZ J Diffusion Plate
1-19 PSHEPA965WJZZ AY J Lens Sheet, x1
1-20 CHLDZB517WJ02 AN N J Panel Chassis Ass'y (Top)
1-21 CHLDZB518WJ02 AP N J Panel Chassis Ass'y (Bottom)
1-22 CHLDZB519WJ02 AL N J Panel Chassis Ass'y (L)
1-23 CHLDZB520WJ02 AL N J Panel Chassis Ass'y (R)
1-24 R1LK400D3FZB2Y CT N P 40" LCD Panel HIRAKI Unit
1-25 LHLDZ3785TPZZ AC J Clip, x4
1-26 CANGKC337WJ02 AN N P Bezel Ass'y (Top)
1-27 CANGKC338WJ01 AN J Bezel Ass'y (Bottom)
1-28 CANGKC339WJ01 AK J Bezel Ass'y (L)
1-29 CANGKC340WJ01 AK J Bezel Ass'y (R)
1-30 LX-EZA028WJF9 AB J Screw, x12
1-31 LX-BZA213WJF7 AA J Screw, x14
1-32 TLABN2229TPZZ AA J Bar Code Label
1-33 PSHEPB027WJZZ BD N J Lens Sheet
1-34 PSHEPB010WJZZ BP P DBEF Sheet

10
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[8] CABINET AND MECHANICAL PARTS (LC-46LE/LU/LX705)

䎤
䎃
䎧 䎛
䎃

䎗䎓

䎜
䎔䎗
䎪 䎖䎛
䎃
䏍
䎃 䏈 䏊
䎗䎙䎅䎃䎯䎦䎧䎃䎳䏄䏑䏈䏏䎃䎰䏒䏇䏘䏏䏈䎃䎸䏑䏌䏗 䎗䎓
䎃 䏉 䎃
䎃
䏅
䎩 䎃
䎖䎔 䎔䎜
䎃
䎗䎘
䎛
䎛 䏆
䎃 䎗䎙
䎔䎐䎘 䎥 䎭 䎖
䎃 䎔䎙 䎃
䎦 䎕䎘
䎔䎐䎘 䎃 䎗䎘
䎔䎐䎛 䎗䎐䎕 䎮䎨䎼䎃䎸䏑䏌䏗
䎔䎐䎕 䎗䎐䎔 䎖䎕 䎖䎓
䎥 䎔䎐䎔 䎗 䎥 䎖䎐䎕
䎃 䎬䎦䎲䎱䎃䎸䏑䏌䏗 䏄 䎃
䎗䎕 䎖䎐䎖 䎖䎐䎔
䎃 䏋 䎕䎚
䎦
䎃
䎃 䎗䎖 䎗䎗
䏋 䎕䎖
䎔䎐䎕䎐䎕
䎃
䎥 䎤
䎔䎐䎗
䎃 䎃
䎔䎐䎙
䎭 䎨
䎔䎐䎚 䎤
䎔䎐䎕䎐䎔 䎃 䎃
䎃 䎵䎒䎦䎏䎃䎯䎨䎧䎃䎸䏑䏌䏗 䎖䎚
䎔䎐䎖
䎔 䎔䎐䎜 䎕 䎨 䎕䎐䎕
䎕䎐䎔
䎔䎐䎕䎐䎖 䎔䎓 䎃

䎨 䎕䎐䎗
䎃 䎙
䎙 䎗䎔
䎙䎐䎗
䎙䎐䎔 䎨
䎙䎐䎕
䎃
䎗䎔 䎙䎐䎗
䏌 䎗䎔
䎃 䎪 䎙䎐䎔 䎖䎜
䎙䎐䎗
䎃 䎙䎐䎔 䎔䎓
䎧 䎤
䎃 䎗䎔 䎃
䏎 䎪 䎙䎐䎗
䎗䎔
䎚 䎃 䎕䎕 䎙䎐䎖 䎃
䏇 䎔䎛
䎖䎘
䎕䎛 䎃
䏍 䏌 䏇 䎙䎐䎔 䎙䎐䎖
䎕䎓
䎃 䎃 䎃 䎖䎙 䎘
䎳䎲䎺䎨䎵䎃䎸䏑䏌䏗 䎗䎔
䎔䎔 䎕䎔 䎔䎕
䏈 䎔䎘
䎃 䎕䎙 䎘䎐䎕
䎘䎐䎖

䎗䎔 䎘䎐䎔
䎗䎔
䎕䎗 䎔䎕
䏊
䎃 䏅
䏉 䎃 䎔䎖
䏆 䎖䎙
䎃 䎔䎚
䎃䎩
䏄
䎃
䎃 䎰䎤䎬䎱䎃䎸䏑䏌䏗 䎕䎜

11
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[8] CABINET AND MECHANICAL PARTS (LC-46LE/LU/LX705)

1 CCABAC378WJ15 BM N P Front Cabinet Ass'y (LC-46LE705)
1 CCABAC378WJ14 BM N P Front Cabinet Ass'y (LC-46LU705)
1 CCABAC378WJ18 BM P Front Cabinet Ass'y (LC-46LX705)
1-1 Not Available - - Front Cabinet
1-2 Not Available - - Front Decoration Ass'y (LC-46LE705)
1-2 Not Available - - Front Decoration Ass'y (LC-46LU705)
1-2 Not Available - - Front Decoration Ass'y (LC-46LX705)
1-2-1 Not Available - - SHARP Badge
1-2-2 Not Available - - Center Decoration (LC-46LE705)
1-2-2 Not Available - - Center Decoration (LC-46LU705)
1-2-2 Not Available - - Center Decoration (LC-46LX705)
1-2-3 Not Available - - Front Decoration
1-3 Not Available - - LED Decoration
1-4 Not Available - - Diffusion Sheet
1-5 Not Available - - Spacer 220*5*0.5, x4
1-6 Double Tape

m
Not Available - -
1-7 Not Available - - Adhesive 150*5
1-8 XEBSN40P10000 AB J Screw for Decoration, x6
1-9 TLABZB406WJZZ AC P ECO Label
2 CCABBB617WJ11 BM N P Rear Cabinet Ass'y
2-1 Not Available - - Rear Cabinet
2-2 Not Available - - Terminal Label

.co
2-4 Not Available - - Spacer 220*5*0.5, x2
3 CBTN-A844WJ11 AH P Control Button Ass'y
3-1 Not Available - - Control Button Label
3-2 Not Available - - Control Button
3-3 Not Available - N - Spacer, x2
4 CCOVAD479WJ11 AM N P Bottom Cover Ass'y
4-1 Not Available - - Bottom Cover
4-2 Not Available - - Reflect Sheet
5 CANGKC375WJ01 AL P Side Terminal Angle Ass'y
5-1 Not Available - - Side Terminal Label
5-2 Not Available - - Side Terminal Angle
es
5-3 Not Available - - Heat Protect Sheet
6 CANGKC407WJ03 - - Support Angle Ass'y, x2
6-1 Not Available - - VESA Bracket, x2
6-2 Not Available - - Support Angle
6-3 Not Available - - Angle for Support
6-4 XHPS730P06WS0 AA J Screw for VESA Bracket, x2
7 LHLDQA001WJ1A AF P ECO Switch Holder
8 LHLDWA175WJUZ AC J Wire Holder, x4
9 LHLDWA176WJUZ AC J Wire Holder
uid

10 LHLDWA289WJKZ AC N J Wire Holder, x3

11 LHLDZA587WJKZ AC J PWB Spacer, x3
12 NSFTZA284WJFW AC J Shaft for D-SUB, x4
13 PCLiCA004WJKZ AC J Rivet, x2
14 PCUSGA079WJZZ AA P Cushion, x11
15 PMLT-A608WJZZ AB P Gasket:8x16x5.5
16 PSHEPB020WJZZ AA N P Protect Sheet, x2
17 PSLDMB651WJZZ AC P Conductor:10x60, x2
18 PSLDMB665WJFW AM P MAIN Shield
19 QCNW-J981WJQZ AE P Connecting Cord (KM)
20 QCNW-J003WJQZ AD P Connecting Cord (PL)
-g

21 QCNW-J911WJQZ AH P Connecting Cord (PD)

22 QCNW-J919WJQZ AH P Connecting Cord (LB)
23 QCNW-J789WJQZ AF P Connecting Cord (RA)
24 QCNW-K273WJQZ AT N P Connecting Cord (LW)
25 QCNW-J909WJQZ AF P Connecting Cord (SP)
26 QCNW-J793WJQZ AG P Connecting Cord (LP)
27 QCNW-J839WJQZ AD P Connecting Cord (IM)
all

28 QCNW-K104WJQZ AU P Connecting Cord (AS)

29 QEARPA339WJFW AB P Earth Plate
30 QEARZA144WJZZ AE J Gasket:60x40, x2
31 RSP-ZA391WJZZ AP J Speaker-L
32 RSP-ZA392WJZZ AP J Speaker-R
35 XBBS730P04000 AA J Screw for Tuner
36 XBPS730P06000 AA J Screw for HDMI, x4
37 XEBS730P08000 AA J Screw for SCART
38 XEBS740P12000 AD J Screw for Front Cabinet/LCD, x11
39 XEBS740P16000 AA P Screw for Front/Rear Cabinet, x5
40 XEBSN40P10000 AB J Screw for Front Cabinet/LCD, x2
41 XHPS730P06WS0 AA J Screw for PWB/Support Angle, x22
42 XHPS730P10WS0 AA P Screw for Rear Cabinet/LCD, x6
43 TLABNC117WJZZ AA P Model Label
44 TLABK0023TAZZ AA J Bar Code Label
45 LX-HZA003WJFN AC J Screw, x2 (for SP)
46 PSPAZC409WJZZ AC N P Gum Cushion

12
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[9] LCD PANEL MODULE UNIT (LC-46LE/LU/LX705)

1-22

1-26 1-24

1-28

1-20

1-21

1-35
1-30

1-36
1-8
1-25 1-1
1-2
1-23
1-4
1-27
1-7 1-3
1-34
1-29
1-31 a
a
b 1-9 1-6
1-10
1-12
1-13 b
1-32 1-5
1-33 1-11
1-17

1-17
1-18 1-17 1-14
1-17

1-15
1-17 1-17 1-16
1-19 1-17
1-17 1-17
1-17
1-19
1-17
1-17 1-17 Insert PUSH RIVET (48 locations)
1-19 1-19
1-19
1-17
1-19
1-17 1-19 1-17
1-19 1-17 1-17 1-17 1-17 1-17 1-17

1-17 1-17 1-17 1-17 1-17 1-17 1-17

1-17
1-19 1-19 1-17 1-17 1-17 1-17 1-17 1-17

1-17 1-17 1-17 1-17 1-17 1-17

1-17
1-17 1-17 1-17 1-17 1-17 1-17

1-17 1-17 1-17 1-17 1-17 1-17

1-17 1-17 1-17 1-17 1-17 1-17

1-17 Insert PUSH RIVET (23 locations) and 1-19 Insert SUPPORT PIN (11 locations) 1-17 1-17 1-17 1-17 1-17 1-17

Insert PUSH RIVET.

23 locations
1-17 1-17 1-17 1-17 1-17 1-17

1-19 1-17 1-19 1-19 1-17 1-19

PUSH RIVET Fasten LED-PWBs with PUSH RIVETs x 48
1-17 1-17 1-17

PUSH RIVET
1-17 1-17 1-17 1-17 1-17 1-17 1-17
1-19 1-19 1-17 1-19

1-17 Insert SUPPORT PIN. Insert PUSH RIVET. In the insertion place (48 places),
11 locations there is a circle marking
1-19 1-19 1-19 1-17 1-19 1-19 LED-PWB by silk-screen printing on LED-PWB.
1-17 1-17 1-17 1-17

Insert it well to the depths.

SUPPORT PIN Not being float.

13
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[9] LCD PANEL MODULE UNIT (LC-46LE/LU/LX705)

1 DLCUCA003FM07 DR N P 46" LCD Panel Module Unit
1-1 PRDARA781WJZZ BF P Back Light Chassis
1-2 LHLDWA284WJKZ AC J Bush Base
1-3 RUNTK4225TPZU BR N P LCD Control Unit
1-4 XHPS730P06WS0 AA J Screw, x6
1-5 QCNW-H089WJQZ AG N J Connecting Cord, x2
1-6 RCORFA061WJZZ AG J Ferrite Core, x2
1-7 QCNW-K253WJQZ AR N P Wire Harness
1-8 CHLDWA285WJ01 AC J Bush Cap Unit
1-9 LHLDWA280WJKZ AC N J Wire Holder, x3
1-10 RUNTKA655WJ01 AU N J LED5 PWB1 Unit, x4
1-11 RUNTKA655WJ02 AU N J LED5 PWB2 Unit, x4
1-12 RUNTKA656WJ01 AW N J LED6 PWB1 Unit, x4
1-13 RUNTKA656WJ02 AW N J LED6 PWB2 Unit, x4
1-14 RUNTKA658WJ01 AX N J LED8 PWB1 Unit, x4
1-15 RUNTKA658WJ02 AX N J LED8 PWB2 Unit, x4
1-16 QCNCWA958WJZZ AD N J Terminator, x8
1-17 LHLDZB497WJKZ AC N J Push Rivet, x71
1-18 PMiR-A277WJZZ AV N J Reflector Sheet
1-19 LHLDZB496WJKZ AC N J Support Pin, x11
1-20 PCOVUA186WJZZ AZ J Diffusion Plate
1-21 PSHEPA966WJZZ AW J Lens Sheet
1-22 CHLDZB509WJ02 AS N P Panel Chassis Ass'y (Top)
1-23 CHLDZB510WJ02 AT N P Panel Chassis Ass'y (Bottom)
1-24 CHLDZB511WJ02 AN N P Panel Chassis Ass'y (L)
1-25 CHLDZB512WJ02 AN N P Panel Chassis Ass'y (R)
1-26 R1LK460D3FZL2Y CV N P 46" LCD Panel HIRAKI Unit
1-27 LHLDZ3785TPZZ AC J Clip, x4
1-28 CANGKC333WJ01 AN P Bezel Ass'y (Top)
1-29 CANGKC334WJ01 AP P Bezel Ass'y (Bottom)
1-30 CANGKC335WJ01 AM P Bezel Ass'y (L)
1-31 CANGKC336WJ01 AM P Bezel Ass'y (R)
1-32 LX-EZA028WJF9 AB J Screw, x16
1-33 LX-HZA039WJF7 AB J Screw, x10
1-34 TLABN2229TPZZ AA J Bar Code Label
1-35 PSHEPB028WJZZ BC N J Lens Sheet
1-36 PSHEPB011WJZZ BR P DBEF Sheet

14
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[10] CABINET AND MECHANICAL PARTS (LC-52LE705)

䎤
䎃
䎧
䎃
䎛

䎔䎖

䎪 䎗䎓
䎃
䎘䎕䎅䎃䎯䎦䎧䎃䎳䏄䏑䏈䏏䎃䎰䏒䏇䏘䏏䏈䎃䎸䏑䏌䏗 䏈 䏊
䎃 䏉 䎃
䎃 䎩
䎕䎜 䎃䏅
䎜 䎃 䎔䎚
䎜 䏆 䎗䎕
䎔䎐䎘 䎥 䎃
䎃 䎖
䎭
䎔䎐䎘 䎦 䎕䎖 䎃
䎜
䎔䎐䎚 䎃
䎔䎐䎕 䎗䎐䎕
䎗䎐䎔 䎮䎨䎼䎃䎸䏑䏌䏗
䎥 䎖䎓 䎜
䎃 䎗
䎥 䎖䎐䎕
䎬䎦䎲䎱䎃䎸䏑䏌䏗 䏄 䎃 䎕䎛 䎖䎐䎖 䎖䎐䎔
䎕䎘 䎗䎔
䎦 䎃 䏋
䎃 䎃 䎖䎔 䎖䎕
䎔䎐䎕䎐䎕 䏋 䎕䎔
䎃 䎤
䎥 䎃
䎔䎐䎗 䎃
䎔䎐䎙 䎨
䎤 䎭 䎃
䎔䎐䎕䎐䎔 䎃䎵䎒䎦䎏䎃䎯䎨䎧
䎃
䎔䎐䎖 䎸䏑䏌䏗
䎔䎐䎔 䎨
䎔 䎃 䎕䎐䎕
䎔䎐䎛
䎔䎐䎕䎐䎖

䎔䎓 䎕䎐䎖

䎨
䎃 䎙
䎙
䎙䎐䎖 䎕䎐䎔
䎙䎐䎕 䎨 䎙䎐䎖 䎖䎛
䎙䎐䎔
䎃
䎖䎚
䏌 䎕
䎃 䎖䎚 䎖䎜
䎙䎐䎖 䎙䎐䎔
䎪
䎧 䎤
䎃
䎃 䎔䎓 䎃
䏎 䎙䎐䎔 䎖䎚
䎖䎚
䎚 䎃 䎪
䏇 䎕䎓 䎃 䎔䎙
䎕䎙 䎃 䎖䎘
䏍 䎙䎐䎔 䎙䎐䎖
䎔䎛 䏌 䏇
䎃
䎃 䎃 䎖䎚 䎙䎐䎕 䎖䎙 䎘
䎳䎲䎺䎨䎵䎃䎸䏑䏌䏗 䎔䎔
䏈
䎃 䎔䎜 䎔䎕
䎔䎗
䎕䎗 䎘䎐䎕
䎘䎐䎖

䎖䎚 䎘䎐䎔
䎕䎕 䎖䎚
䏊 䎔䎕
䎃 䏅
䏉
䎃 䏆䎃 䎔䎖 䎖䎙
䎃 䎔䎘
䎩
䏄
䎃
䎃 䎰䎤䎬䎱䎃䎸䏑䏌䏗 䎕䎚

15
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[10] CABINET AND MECHANICAL PARTS (LC-52LE705)

1 CCABAC377WJ12 BQ N P Front Cabinet Ass'y
1-1 Not Available - - Front Cabinet
1-2 Not Available - - Front Decoration Ass'y
1-2-1 Not Available - - SHARP Badge
1-2-2 Not Available - - Center Decoration
1-2-3 Not Available - - Front Decoration
1-3 Not Available - - LED Decoration
1-4 Not Available - - Diffusion Sheet
1-5 Not Available - - Himeron, x4
1-6 Not Available - - Double Tape, x5
1-7 XEBSN40P10000 AB J Screw for Decoration, x7
1-8 TLABZB406WJZZ AC P ECO Label
2 CCABBB616WJ11 BQ P Rear Cabinet Ass'y
2-1 Not Available - - Rear Cabinet
2-2 Not Available - - Terminal Label
2-3 Not Available - - Himeron, x2
3 CBTN-A844WJ11 AH P Control Button Ass'y
3-1 Not Available - - Control Button Label
3-2 Not Available - - Control Button
3-3 Not Available - N - Spacer, x2
4 CCOVAD479WJ11 AM N P Bottom Cover Ass'y
4-1 Not Available - - Bottom Cover
4-2 Not Available - - Reflect Sheet
5 CANGKC375WJ01 AL P Side Terminal Angle Ass'y
5-1 Not Available - - Side Terminal Label
5-2 Not Available - - Side Terminal Angle
5-3 Not Available - - Heat Protect Sheet
6 CANGKC416WJ02 AT P Support Angle Ass'y, x2
6-1 Not Available - - VESA Bracket, x2
6-2 Not Available - - Support Angle
6-3 XHPS730P06WS0 AA J Screw for VESA Bracket, x2
7 LHLDQA001WJ1A AF P ECO Switch Holder
8 LHLDWA133WJKZ AC J Wire Holder for Power
9 LHLDWA175WJUZ AC J Wire Holder, x4
10 LHLDWA289WJKZ AC N J Wire Holder, x3
11 LHLDZA587WJKZ AC J PWB Spacer, x3
12 NSFTZA284WJFW AC J Shaft for D-SUB, x4
13 PCLiCA004WJKZ AC J Rivet
14 PMLT-A608WJZZ AB P Gasket:8x16x5.5
15 PSLDMB651WJZZ AC P Conductor:10x60, x3
16 PSLDMB665WJFW AM P MAIN Shield
17 QCNW-J979WJQZ AE P Connecting Cord (KM)
18 QCNW-J003WJQZ AD P Connecting Cord (PL)
19 QCNW-J986WJQZ AH P Connecting Cord (PD)
20 QCNW-J921WJQZ AH P Connecting Cord (LB)
21 QCNW-J805WJQZ AF P Connecting Cord (RA)
22 QCNW-K032WJQZ BB P Connecting Cord (LW)
23 QCNW-J984WJQZ AF P Connecting Cord (SP)
24 QCNW-J801WJQZ AG P Connecting Cord (LP)
25 QCNW-J840WJQZ AD P Connecting Cord (IM)
26 QCNW-K104WJQZ AU P Connecting Cord (AS)
27 QEARPA339WJFW AB P Earth Plate
28 QEARZA144WJZZ AE J Gasket:60x40, x5
29 RSP-ZA391WJZZ AP J Speaker-L
30 RSP-ZA392WJZZ AP J Speaker-R
32 TLABK0023TAZZ AA J Bar Code Label
31 TLABNC117WJZZ AA P Model Label
35 XBBS730P04000 AA J Screw for Tuner
36 XBPS730P06000 AA J Screw for HDMI, x4
37 XHPS730P06WS0 AA J Screw for PWB/Support Angle, x22
38 XEBS730P08000 AA J Screw for SCART
39 XEBS740P16000 AA P Screw for Front/Rear Cabinet, x5
40 XEBSN40P10000 AB J Screw for Front Cabinet/LCD, x14
41 XHPS730P10WS0 AA P Screw for Rear Cabinet/LCD, x6
42 PSPAZC409WJZZ AC N P Gum Cushion

16
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[11] LCD PANEL MODULE UNIT (LC-52LE705)

1-20

1-22
1-24

1-30

1-26

1-18

m
1-19

1-33 1-8
1-28
1-2
1-23 1-34
1-35 1-4
1-7

.co
1-21 1-9
1-3
a
1-25
a 1-9
1-32 1-29
1-10
1-27 1-12

1-13
b
1-5
b 1-11

1-31 1-30

1-15
es
1-15 1-1
1-16 1-15

1-15
1-12

1-13
uid

1-14

1-17 1-15
1-15

1-15 1-15
1-15

1-17 1-17 1-15

1-17
1-15
1-15 1-15 1-15 Insert PUSH RIVET (48 locations)
-g

1-17

1-15 1-15 1-15 1-15 1-15 1-15

1-15 Insert PUSH RIVET (33 locations) and 1-17 Insert SUPPORT PIN (11 locations) 1-15 1-15 1-15 1-15 1-15 1-15

1-15 1-15 1-15 1-15 1-15 1-15

1-15 1-15 1-15 1-15 1-15 1-15

all

1-15 1-15 1-15 1-15 1-15

1-15 1-15 1-15 1-15 1-15 1-15

1-15 1-17 1-15 1-15 1-17

1-15 1-15 1-15 1-15 1-15 1-15

1-15 1-15 1-17 1-15 1-15 1-17 1-15 1-15

1-15 1-15 1-15 1-15 1-15 1-15

1-15 1-17 1-15 1-17 1-15 1-17

1-15 1-15 1-15 1-15 1-15 1-15

1-15 1-15 1-15 1-15

1-15 1-17 1-15 1-15 1-17 1-15 1-15

1-17 1-15 1-15 1-17 PUSH RIVET Fasten LED-PWBs with PUSH RIVETs x 48

1-15 1-15 1-15 1-15 1-15

1-15

Insert SUPPORT PIN. Insert PUSH RIVET. In the insertion place (48 places),
11 locations there is a circle marking
Insert PUSH RIVET. 1-17 LED-PWB by silk-screen printing on LED-PWB.
33 locations
1-15

Insert it well to the depths.

PUSH RIVET SUPPORT PIN Not being float.

17
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[11] LCD PANEL MODULE UNIT (LC-52LE705)

1 DLCUCA004FM07 DU N P 52" LCD Panel Module Unit
1-1 CRDARA844WJ01 BH N P Back Light Chassis
1-2 LHLDWA284WJKZ AC J Bush Base
1-3 RUNTK4225TPZU BR N P LCD Control Unit
1-4 XHPS730P06WS0 AA J Screw, x6
1-5 QCNW-K183WJQZ AN P Connecting Cord, x2
1-7 QCNW-K255WJQZ AX N P Wire Harness
1-8 CHLDWA285WJ01 AC J Bush Cap Unit
1-9 LHLDWA280WJKZ AC N J Wire Holder, x3
1-10 RUNTKA656WJ01 AW N J LED6 PWB1 Unit, x4
1-11 RUNTKA656WJ02 AW N J LED6 PWB2 Unit, x4
1-12 RUNTKA658WJ01 AX N J LED8 PWB1 Unit, x8
1-13 RUNTKA658WJ02 AX N J LED8 PWB2 Unit, x8
1-14 QCNCWA958WJZZ AD N J Terminator, x8
1-15 LHLDZB497WJKZ AC N J Push Rivet, x81
1-16 PMiR-A279WJZZ AX N J Reflection Sheet
1-17 LHLDZB496WJKZ AC N J Support Pin, x11
1-18 PCOVUA187WJZZ BA J Diffusion Plate
1-19 PSHEPA967WJZZ AZ J Lens Sheet, x1
1-20 CHLDZB505WJ01 AT P Panel Chassis Ass'y (Top)
1-21 CHLDZB506WJ01 AU P Panel Chassis Ass'y (Bottom)
1-22 CHLDZB507WJ02 AR N P Panel Chassis Ass'y (L)
1-23 CHLDZB508WJ02 AR N P Panel Chassis Ass'y (R)
1-24 R1LK520D3FZL0Y CY P 52" LCD Panel HIRAKI Unit
1-25 LHLDZB194WJKZ AX P Clip, x6
1-26 CANGKC329WJ01 AQ P Bezel Ass'y (Top)
1-27 CANGKC330WJ01 AR P Bezel Ass'y (Bottom)
1-28 CANGKC331WJ01 AN P Bezel Ass'y (L)
1-29 CANGKC332WJ02 AP N P Bezel Ass'y (R)
1-30 LX-EZA028WJF9 AB J Screw, x18
1-31 LX-HZA039WJF7 AB J Screw, x9
1-32 TLABN2229TPZZ AA J Bar Code Label
1-33 PSHEPB029WJZZ BF N J Lens Sheet
1-34 PSHEPB012WJZZ BU P DBEF Sheet
1-35 LX-HZA064WJF7 AB P Washer Screw, x3

[12] SUPPLIED ACCESSORIES

X1 X2 X4 Stand unit ( x 1)
Remote control unit ( x 1) AC cord ( x 1)

X4-1 Screw ass'y ( x 1) X4-1 Screw ass'y ( x 1)

Product shape varies in For 32 inch models For 40/46/52 inch models
some countries.
Screw for Screw for Screw for
X3 set (x 4) stand (x 4) set (x 4) Screw for
Cable clamp ( x 1) stand (x 4)

X5 Operation manual (this publication)

X6 “AAA” size zinc-carbon battery ( x 2)

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[12] SUPPLIED ACCESSORIES

X1 RRMCGA771WJSA AU P Remote Control Unit
! X2 QACCKA047WJPZ AH P AC Cord 2P
X3 LHLDWA173WJKZ AC P Cable Clamp
X4 CDAi-A595WJ02 BH P Stand Unit (for 32 inch models)
X4 CDAi-A600WJ02 BL N P Stand Unit (for 40 inch models)
X4 CDAi-A593WJ02 BM N P Stand Unit (for 46/52 inch models)
X4-1 Not Available - N - Screw Ass'y (for 32 inch models)
X4-1 Not Available - N - Screw Ass'y (except for 32 inch models)
X5 TiNS-E281WJN1 AK N P Operation Manual (for Europe except for East Europ
X5 TiNS-E282WJN1 AH N P Operation Manual (for Sweden)
X5 TiNS-E283WJN1 AP N P Operation Manual (for East Europe)
X6 Not Available - - "AAA" size inc-carbon battery, x2
X7 TCAUSA034WJZZ AA P Caution Sheet (for East Europe)
X8 TCAUZA408WJZZ AB N P Caution Card
X9 TGAN-B078WJZZ AC P Warranty Card (for East Europe)
X10 TGAN-B079WJZZ AB P Warranty Coupon (for East Europe)

18
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[13] PACKING PARTS (NOT REPLACEMENT ITEM) (LC-32/40LE/LU/LX705)

S5
X5

X1

X2

S13
S3 X3
X6
S3

S6
S8
S9
S10
S11
S12
X4

S2

S7

S3

S3

S1
Not Replacement item

19
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[13] PACKING PARTS (NOT REPLACEMENT ITEM) (LC-32/40LE/LU/LX705)

S1 SPAKCF104WJZZ - - Packing Case (for 32 inch models)
S1 SPAKCF105WJZZ - N - Packing Case (for 40 inch models)
S2 SPAKPB437WJZZ - - Wrapping Paper (for 32 inch models)
S2 SPAKPB475WJZZ - N - Wrapping Paper (for 40 inch models)
S3 SPAKXC664WJZZ - - Packing Add Top/Bottom (for 32 inch models)
S3 SPAKPB478WJZZ - N - Packing Add Top/Bottom (for 40 inch models)
S5 SSAKAA111WJZZ - - B5 Sack
S6 SSAKHA054WJZZ - N - Pac for Screw
S7 TLABM5584BMZZ - - Case Label
S8 SPAKPB413WJZZ - N - Mirror Mat Sup (for 32 inch models)
S8 SPAKPB415WJZZ - N - Mirror Mat Sup (for 40 inch models)
S9 SPAKAA515WJZZ - N - Wrap (for 32 inch models)
S9 SPAKAA516WJZZ - N - Wrap (for 40 inch models)
S10 SPAKPB412WJZZ - N - Mirror Mat Base (for 32 inch models)
S10 SPAKPB414WJZZ - N - Mirror Mat Base (for 40 inch models)
S11 SPAKFB914WJZZ - N - Stand Case (for 32 inch models)
S11 SPAKFB919WJZZ - N - Stand Case (for 40 inch models)
S12 SPAKFB915WJZZ - N - Stand Pad (for 32 inch models)
S12 SPAKFB916WJZZ - N - Stand Pad (for 40 inch models)
S13 SSAKAA009WJZZ - - Sack 150*100

20
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
[14] PACKING PARTS (NOT REPLACEMENT ITEM) (LC-46LE/LU/LX705, LC-52LE705)
X5

S8
X1

S11
S12
S4 S13
X2
S14
S15
S5 S16
S7 X4
X3 X4-1
X6

S4

S3

S4

S6

S4
S10

S2

S1

21
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

NO. PARTS CODE PRICE NEW PART DESCRIPTION

RANK MARK DELIVERY

[14] PACKING PARTS (NOT REPLACEMENT ITEM) (LC-46LE/LU/LX705, LC-52LE705)

S1 SPAKCF106WJZZ - N - Packing Case (for 46 inch models)
S1 SPAKCF108WJZZ - - Packing Case (for 52 inch models)
S2 SPAKCF107WJZZ - N - Packing Case Bottom (for 46 inch models)
S2 SPAKCF109WJZZ - - Packing Case Bottom (for 52 inch models)
S3 SPAKPB477WJZZ - N - Wrapping Paper (for 46 inch models)
S3 SPAKPB478WJZZ - N - Wrapping Paper (for 52 inch models)
S4 SPAKXC666WJZZ - N - Packing Add Top/Bottom (for 46 inch models)
S4 SPAKXC669WJZZ - - Packing Add Top/Bottom (for 52 inch models)
S5 SPAKXC667WJZZ - N - Packing Add Top Center (for 46 inch models)
S5 SPAKXC670WJZZ - - Packing Add Top Center (for 52 inch models)
S6 SPAKXC668WJZZ - N - Packing Add Bottom Center (for 46 inch models)
S6 SPAKXC671WJZZ - - Packing Add Bottom Center (for 52 inch models)
S7 SSAKAA009WJZZ - - Sack 150*100
S8 SSAKAA111WJZZ - - B5 Sack
S10 TLABM5584BMZZ - - Case Label
S11 Mirror Mat Sup

m
SPAKPB417WJZZ - N -
S12 SPAKAA517WJZZ - N - Wrap
S13 SPAKPB416WJZZ - N - Mirror Mat Base
S14 SSAKHA054WJZZ - N - Sack
S15 SPAKFB872WJZZ - N - Stand Case
S16 SPAKFB897WJZZ - N - Stand Pad
[15] SERVICE JIGS (USE FOR SERVICING)

.co
N QCNW-G616WJQZ BK J Connecting Cord Main-LCD Control (LW)
N QCNW-H347WJQZ AY J Connecting Cord Main-LCD Control (LP)
N QCNW-G625WJQZ AP J Connecting Cord Main-Power (PL)
N QCNW-H184WJQZ AX J Connecting Cord Main-Power (PD)
N QCNW-K036WJQZ AV J Connecting Cord Main+LCD Control-Power (LB)
N QCNW-G440WJQZ AP J Connecting Cord Main-Key (KM)
N QCNW-H348WJQZ AW J Connecting Cord Main-R/C, LED (RA)
N QCNW-J413WJQZ AQ J Connecting Cord Main-Speaker (SP)
N QCNW-G442WJQZ AK J Connecting Cord R/C, LED-ICON (IM)
es
uid
-g
all

22
All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
 All manuals and user guides at [Link]
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S

COPYRIGHT © 2009 BY SHARP CORPORATION

ALL RIGHTS RESERVED.

No Part of this publication may be reproduced,

stored in a retrieval system, or transmitted in
any from or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.

SHARP CORPORATION
AV Systems Group
Nov. 2009 CS Promotion Center
SH. DS Yaita,Tochigi 329-2193, Japan