Johnson Controls Technical Support
January 24, 2018
Software Release
Product: 4100ES, 4010ES
Programmer: ESProgrammer_3.[Link]
Executive: ES_3.[Link]
Slaves included: 4010IDNETPLUS_3.12.13
(new files in bold) Amp_20203 (cards 566-205, -206, -208 use with > 28 speakers/circuit)
Amp_2.03.03 (cards 566-205, -206, -208 use with up to 28 speakers/circuit)
Amp2_3.02.05 (cards 566-521, -523, -524)
AudAna_20101
AudDig_10502 (card 566-033)
AudDig2_20102 (card 566-409)
BMUX_10102
BNIC_1.01.02
CPUBoot_2.02.03
EBOOT_1.01.03
EOS_1.01.02
EPS_1.07.01
ESNET_1.01
ESNET_EBOOT_1.01
ESNET_EOS_1.01
ESS_1.07
FUI_1.05
FUIBoot_104
IDNET_3.12.13
IDNET1PLUS_3.12.13
idnet2_2.01
IDNETPLUS_3.12.13
lmc_3.01.02
MSS_3.12.11
MSSI_3.12.13
mxdloop_2.01.03
Phone_1.04.01
rps_3.12.11
SecurityZoneRelay_1.02
SPS_204 (for Rev E and earlier boards)
sps_3.12.13
TFXLoop_10103
tic_3.01.02
TIC2_1.01.03
TPS_1.05.05
XALIC_10105
XBC_10604
XPS_3.12.11
XSIG_101
Compatibility See SB11002 (in C:\4100ESINFO)
1
After downloading:
Find the Programmer installation file in C:\4100ESProg
Find the BIN files in C:\4100ubin\Rev3-10-01
Find the documentation in C:\4100ESinfo
To Install the Programmer go to C:\4100ESProg and double click on ESProgrammer_3.[Link]
ES Programmer 3.10.01
DBF Revision = 179
Functional Changes:
None
Fixed Defects:
757393 Issue importing MX points if done prior to viewing MX Card point editing tab
738881 Import of Group Activation Lists is not correct
843034 Cannot see Custom Control Programs 4 - 12 when creating or updating a 4007
Other Changes:
None
4100/4010ES Executive 3.10
Functional Changes:
Added ES Net support
Fixed Defects:
751833 Panel fails with message Error 12: Locked by the same owner
759379 Pseudo points' Priority setting goes to 0 from 15 when the points turn On.
772704 Master does not show Fire Network Link Down trouble through the computer port command
LIST TROUBLE
785169 Wrong information is log in the trouble when performing a Repeater All operation with the Log
Control option enable
793835 ES Net diag attendance on FUI display glitch
796034 Sending the command diag res also resets the network card from the local node.
800890 4120: The master crashes when the network diagnostics are logged to the printer and trying to
view the tallies.
806225 Remote download enable timeout does not revert download enable card control point
806911 master crash when using paged output on network service port
816318 4120: ES panel crashes when Net Diagnostics log Receive errors" to Printer is selected."
Other Changes:
None
Usage Notes:
Requires revision 3.10 or 3.10.01 of the ES Programmer.
Revision 3.10 of the ESSupport tools should be used with this release.
2
EPS_1.[Link]
Functional Changes:
None
Fixed Defects:
None
Other Changes:
834642 Candela Drop down should be updated for WP UL Hi Candela Ceiling Mount Speaker device
ESNET_1.[Link]
ESNET_EBOOT_1.[Link]
ESNET_EOS_1.[Link]
Functional Changes:
Initial Release
Fixed Defects:
None
Other Changes:
None
IDNET_3.[Link]
sps_3.[Link]
MSSI_3.[Link]
IDNET1PLUS_3.[Link]
Functional Changes:
None
Fixed Defects:
816454 Smoke detector was not initialized when an IAM is at the same address
834892 IDNet rev 3.12.12 reports MCOPH/MCHPHS intermittent wrong device troubles.
Other Changes:
None
3
IDNETPLUS_3.[Link]
4010IDNetPlus_3.[Link]
Functional Changes:
None
Fixed Defects:
816454 Smoke detector was not initialized when an IAM is at the same address
Other Changes:
None
