We build a better future

STANDARD EQUIPMENT
ISO standard cabin ·Warning Removable clean out screen for radiator
·Cabin ROPS(ISO 3471) Fuel level Automatic swing brake
FOG(ISO 10262 Level Ⅰ) Engine oil pressure Removable reservoir tank
FOPS(ISO 3449) Engine coolant temperature Water separator, fuel line
TOPS(ISO 12117) Hyd. oil temperature Mono boom (3.0 m, 9’10”)
·All-weather steel cab with all-around visibility Low battery Arm (1.6 m, 5’ 3”)
·Safety glass windows Air cleaner closing Tires (12.0 x 16.5 - 12PR, single)
·Rise-up type windshield wiper Door and cab locks, one key Blade (1925 x 354mm, 6'4" x 14")
·Sliding fold-in front window Radio / USB player with remote control Starting aid (air grid heater) cold weather
·Sliding side window Three outside rear view mirrors Single acting piping kit (breaker, etc)
·Lockable door Mechanical suspension seat with heater Viscous fan clutch With Tier 2 Engine installed
·Accessory box & Ash-tray Console box tilting system(LH.) Swing Boom
Centralized monitoring Four front working lights
·Engine speed Electric horn
·Gauges Battery (1 x 12 V x 100 AH)
Fuel level gauge Battery master switch
Engine coolant temperature gauge 12 volt power supply

OPTIONAL EQUIPMENT
Air-conditioner & heater Fixed Boom Tool kit
Fuel filler pump(35l/min, 9.2 US gpm) Accumulator, work equipment lowering Mechanical suspension seat
Beacon lamp Cabin front (2) and rear (1) work lamp
Double acting piping kit (clamshell, etc) Quick coupler
Safety lock V/V for boom cylinder Narrow bucket(0.07m , 0.09yd )
3 3

Safety lock V/V for arm cylinder Long arm (1.9m, 6’ 3”)

* Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.
* The photos may include attachments and optional equipment that are not available in your area.
* Materials and specifications are subject to change without advance notice.
* All imperial measurements rounded off to the nearest pound or inch.

PLEASE CONTACT

*Photo may include optional equipment.

[Link] 2015. 02 Rev. 1

 Pride at Work
Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every
operator maximum performance, more precision, versatile machine preferences, and proven quality.
Take pride in your work with Hyundai!

Machine Walk-Around

Rugged Upper and Lower Frame

The upper frame is designed with optimum structural integrity to absorb impact and operational
stress. Reinforced lower frame and strenghened fenders provide exceptional strength and longer
service life to withstand tough working conditions.

Engine Technology
The fuel efficient, Tier 2 certified Yanmar 4TNV94L – PHYBY engine provides proven, reliable power.

Efficient Control System

All control devices are arranged for higher productivity and improved operator comfort. Efficient
and ergonomic controls allow an operator to control the machine in any working environment. A
safety lever on the left-side console is provided to prevent exiting the cabin while hydraulic controls
are live.

Advanced Hydraulic System

The advanced hydraulic system includes an arm flow summation system, boom holding system
and a swing parking brake for smooth and fine control. Other valuable features include a
hydraulic damper in the travel pedal, and a hydraulically lubricated swing reducer with a leak-
free grease chamber.

Comfortable and Durable Cabin

The cabin is roomy and ergonomically designed, for reduced noise and good visibility. The cabin
frame meets international standard TOPS, ROPS, FOPS ensuring operator safety.

Operator Convenience
Convenient operator features include a suspension seat, excellent visibility, and variable storage
space for advanced operator comfort. The newly designed LED cluster provides current information,
including engine RPM, engine coolant, fuel level, and electric components. A hydraulic function
safety lock and auto diagnostic features are also available. lock and failure diagnosis functions are
also intergrated.
A powerful air conditioning system and Radio/USB interface contribute to a comfortable work
environment.

Easy and Simple Maintenance

Wide open access of doors, covers, hoods is designed for easier maintenance. The air cleaner and
centralized grease fittings are also integrated for easy service.

Extended Life of Components

Long life components and wear parts, including hydraulic filters, oil, shims, and bushings, help to
reduce operating costs.

*Photo may include optional equipment.

2/3
Preference Operator Comfort
The R60W-9S operator's cab is designed for a comfortable operating experience.
An ergonomically designed suspension seat, adjustable arm rests and a spacious
environment helps to minimize operator fatigue. Control levers are easily accessible and
a instrument display is provided to keep the operator informed of pertinent machine information.

1. A large upper roof glass provides additional visibility and a a roller shade is provided to reduce glare and sunlight.
2. An advanced audio system with AM/FM stereo with USB player, plus remotely located control is perfect for
listening to music favorites.
3. A hands-free cell phone function is available for safe and convenient phone use.
4. Ergonomically designed joysticks reduce operator fatigue during the work day.
5. Multiple storage compartments are available for additional convenience.

1 2 3 4 5
Roller shade Radio & USB player Hands-free cell Joystick Storage
with remote control phone compartment

Enhanced Cabin
Hyundai's R60W-9S is equipped for convenience and productivity.
1. Adjustable position window prevents window movement while operating.
2. A sliding fold-in front window is easily opened and safely stored in an open position to improve ventilation and visibility.
3. A tilt-up left side control console provides easier entrance and exit from the cab.
4. A power climate control system provides the operator with optimum air temperature.

1 2 3
Adjustable side window Sliding fold-in front window Tilt-up control console

4
Climate control system

*Photo may include optional equipment. Operator - Friendly Cluster

The advanced new LED cluster allows the operator to select his
personal machine preferences. The monitor displays engine rpm,
engine oil temperature, water temperature and information for
all electronic devices.
Wide Cabin with Excellent Visibility Button selections are provided for auto idle mode, max power
mode, and travel speed. A security feature is also provided to
The newly designed cabin was conceived for more space, a wider field of view and prevent the machine from starting without a proper password.
operator comfort. Special attention was given to a clear, open and convenient
interior with plenty of visibility on the machine surroundings and the job at hand.
This well balanced combination of precision aspects put the operator in the perfect
position to work safely and securely.

4/5
 Precision & Performance
Innovative hydraulic system technologies make the R60W-9S excavator fast, smooth
and easy to control. Also R60W-9S is designed for maximum performance to keep
the operator working productively. Excellent Performance
Hyundai's 9S series offers the operator maximized productivity and efficiency. A convenient throttle volume dial with LED
light allows the operator to customize engine power according to job requirements. A max power button maximizes
machine speed and power for mass production.
The R60W-9S also features an auto idle system which improves fuel efficiency and reduces cab noise.

Improved Hydraulic System

To achieve optimum precision, Hyundai redesigned the hydraulic system to
provide the operator with super fine touch and improved controllability.
Improved pump flow control reduces flow when controls are not being used to
minimize fuel consumption. Improved spool valves in the control valve are
engineered to provide more precise flow to each function with less effort.
Improved hydraulic valves, precision-designed variable volume piston pumps,
fine-touch pilot controls, and enhanced travel functions make any operator
running a 9S series look like a smooth operator. Boom-down flow regeneration
and control valve technology are newly improved.

Variable Swing Boom (Option)

The R60W-9S's boom swing function is designed for efficient work in congested residential and urban areas. The boom
can be offset left or right within an operating range. Plus, increased swing torque provides enhanced operating capability
on the slope.

80 50
o o

Structure Strength
The 9S series cabin structure has been fitted with stronger
but slimmer tubing for more safety and improved visibility.
Low-stress, high strength steel is integrally welded to form a
stronger, more durable upper and lower frame. Structural
integrity was tested by way of FEM (Finite Elements Method)
analysis and long-term durability tests.

Yanmar 4TNV94L – PHYBY

The Highest Engine Power in its Class

Yanmar 4TNV94L – PHYBY engine provides 20.6 kgf.m (149 [Link])

of maximum torque with 57 HP at 2,400rpm of rated power.
This means the R60W-9S runs with the most power in its class,
giving you more power to get the job done.

*Photo may include optional equipment.

6/7
 Profitability Fuel Efficient
9S series compact excavators
are engineered to be extremely
fuel efficient. A newly applied
R60W-9S is designed to maximize profitability through improved efficiencies, cooling fan clutch contributes to reduced noise and improved
enhanced service features and longer life components. fuel efficiency.

Improved Durability
The R60W-9S is equipped with counterweight rear guards to
protect the engine hood. Attachment pin with lock-nut type
prevents deformation of boom lug and reduces the side play
at the boom to arm connection for a long life.

Easy Access
Centralized grease fittings and easy change plastic air cleaner
provide faster, easier service and maintenance.

Wide Open Engine hood

A newly designed full-open type engine hood makes service more convenient on the R60W-9S.

Extended Life Components

The 9S series is designed for longer lubrication intervals and extended component life. Hydraulic oil
can last up to 5,000 hours before changing. Also, a new center pivot roller bearing design, now
double tapered, requires less maintenance as well. Long life and extended wear components save
the operator time and money.

*Photo may include optional equipment.

8/9
Specifications
ENGINE SWING SYSTEM BUCKETS
MODEL YANMAR 4TNV94L – PHYBY Swing motor Axial pistons motor Capacity Width
Weight
Swing reduction Planetary gear reduction SAE heaped CECE heaped Without side cutters With side cutters
Water cooled, 4 cycle diesel
Swing bearing lubrication Grease-bathed 0.07 m (0.09 yd )
3 3
0.06 m (0.08 yd )
3 3
315 mm(12.4") 360 mm(14.2") 115 kg(255 lb)
Type 4 cylinders in line,
Swing brake Multi wet disc 0.18 m (0.24 yd )
3 3
0.15 m (0.20 yd )
3 3
670 mm(26.4") 740 mm(29.1") 170 kg(375 lb)
direct injection, low emission
Swing speed 9 rpm ◈ 0.18 m (0.24 yd )
3 3
0.15 m (0.20 yd )
3 3
610 mm(24.0") 740 mm(29.1") 170 kg(375 lb)
J1995 (gross) 57 HP (42 kW) at 2,400 rpm
Rated SAE
J1349 (net) 55 HP (41 kW) at 2,400 rpm
flywheel
6271/1 (gross) 57.7 PS (42 kW) at 2,400 rpm
COOLANT & LUBRICANT CAPACITY
horsepower DIN
6271/1 (net) 56 PS (41 kW) at 2,400 rpm Re-filling liter US gal UK gal DIGGING FORCE
Fuel tank 125.0 33.0 27.5 Length 1,600 mm (5' 3") 1,900 mm (6' 3")
Max. torque 20.6 kgf.m (149 [Link]) at 1,440 rpm Arm
Engine coolant 9.5 2.5 2.1 Weight 210 kg (460 lb) 230 kg (510 lb)
Bore X stroke 94 mm (3.7") x 110 mm (4.33")
Engine oil 11.6 3.1 2.6 37.7 kN 37.7 kN
Piston displacement 3,054 cc (186 cu in)
Swing device - gear oil 1.5 0.4 0.3 SAE 3,850 kgf 3,850 kgf
Batteries 1 x 12 V x 100 AH
Hydraulic tank 70.0 18.5 15.4 Bucket digging 8,490 lbf 8,490 lbf
Starting motor 12 V-3.0 kW
Hydraulic system 120.0 31.7 26.4 force 42.4 kN 42.4 kN
Alternator 12 V-100 Amp
Axle(Front/Rear) 5.3/5.3 1.4/1.4 1.2/1.2 ISO 4,330 kgf 4,330 kgf
9,550 lbf 9,550 lbf
HYDRAULIC SYSTEM 28.4 kN 25.5 kN
MAIN PUMP AXLES & TIRES SAE 2,900 kgf 2,600 kgf
Type Variable displacement piston pump Full floating front axle is supported by center pin for oscillation. Arm crowd 6,390 lbf 5,730 lbf
SAE heaped 0.07 m (0.09 yd )
3 3
0.18 m (0.24 yd )
3 3
◈ 0.18 m (0.24 yd )
3 3

Max. flow 2 X 60 ℓ/min

ℓ (15.9 US gpm/13.2 UK gpm) It can be locked by oscillation lock cylinders. force 31.9 kN 28.7 kN
Sub-pump for pilot circuit Gear pump Rear axle is fixed on the lower chassis. ISO 3,260 kgf 2,930 kgf
Cross-sensing and fuel saving pump system Tires 12.0 x 16.5-12PR, single 7,190 lbf 6,460 lbf
HYDRAULIC MOTORS ◈ Heavy duty bucket *Arm weight including cylinder and linkage.
Axial piston motor with counter
Travel
balance valve and parking brake DOZER BLADE
Swing Axial piston motor with automatic brake Pin-on type dozer blade is standard. Dozer blade is a very useful addition for
RELIEF VALVE SETTING leveling and back filling or clean-up work.
Implement circuits
Travel circuit
220 kgf/cm (3,130 psi)
2

220 kgf/cm (3,130 psi)

2
Width x Height: 1,925 x 355mm(6’ 4” x 1’ 2” ) Lifting Capacity
Dozer blade Max. lifting above ground level: 445mm(17.5”)
Swing circuit 220 kgf/cm (3,130 psi)
R60W-9S
2

Max. depth below ground level: 140mm(5.5”) Rating over-front Rating over-side or 360 degree
Pilot circuit 30 kgf/cm (430 psi)
2

Boom : 3.0m (9’ 10”) / Arm : 1.6 m (5’ 3”) / Bucket : 0.18m3 (0.24yd3) SAE heaped / Dozer blade down
Service valve Installed
Load radius At max. reach
Load point
HYDRAULIC CYLINDERS 2.0 m (7 ft) 3.0 m (10 ft) 4.0 m (13 ft) 5.0 m (16 ft) Capacity Reach
OPERATING WEIGHT (APPROXIMATE) height
Boom: 1-110 x 715 mm (4.3” x 28.1”) m (ft) m (ft )
Operating weight, including 3,000 mm (9’ 10”) boom, 1,600 mm (5’ 3”) arm, SAE
Arm: 1-90 x 850 mm (3.5” x 33.5”)
No. of cylinder heaped 0.18 m (0.24 yd ) digging bucket, lubricant, coolant, full fuel tank,
3 3 5.0 m kg *960 *960 4.47
Bucket: 1-80 x 660 mm (3.1” x 26.0”) (16 ft) lb *2120 *2120 (14.7)
bore X stroke hydraulic tank and the standard equipment.
Boom swing: 1-95 x 527 mm (3.7” x 20.7”) 4.0 m kg *1020 *1020 *990 720 5.26
Dozer blade: 1-100 x 189 mm (3.9” x 7.4”) MAJOR COMPONENT WEIGHT (13 ft) lb *2250 *2250 *2180 1590 (17.3)
Upperstructure 2,680 kg ( 5,910 lb) 3.0 m kg *1150 1120 *990 760 *1020 620 5.69
(10 ft) lb *2540 2470 *2180 1680 *2250 1370 (18.7)
Mono boom(with arm cylinder) 310 kg ( 680 lb)
2.0 m kg *1900 1690 *1400 1070 *1200 740 *1070 570 5.86
TRAVEL SYSTEM OPERATING WEIGHT (7 ft) lb *4190 3730 *3090 2360 *2650 1630 *2360 1260 (19.2)
Max. travel speed 30 km/h (18.6 mph) Operating weight 1.0 m kg *2500 1580 *1670 1020 *1310 720 *1110 570 5.81
5,550 kg ( 12,240 lb)
Gradeability 35° (70%) (3 ft) lb *5510 3480 *3680 2250 *2890 1590 *2450 1260 (19.1)
·Mono boom with blade Ground kg *2690 *2690 *2720 1530 *1820 990 *1350 700 *1160 620 5.51
Line lb *5930 *5930 *6000 3370 *4010 2180 *2980 1540 *2560 1370 (18.1)
-1.0 m kg *4040 3040 *2610 1520 *1760 980 *1180 740 4.92
CONTROLS (-3 ft) lb *8910 6700 *5750 3350 *3880 2160 *2600 1630 (16.1)
-2.0 m kg *3400 3100 *2090 1550
Pilot pressure operated joysticks and pedals with detachable lever provide almost
(-7 ft) lb *7500 6830 *4610 3420
effortless and fatigueless operation.

Two joysticks with one safety lever

Pilot control (LH): Arm and swing (Boom swing)
(RH): Boom and bucket (ISO)
Traveling and steering Pedal and steering wheel
Engine throttle Cabin(Dual type), E/G(Mechanical)
Lifting Capacity Dimensions & Working Range
R60W-9S DIMENSIONS unit: mm(ft . in)
R60W-9S Rating over-front Rating over-side or 360 degree

Boom : 3.0m (9’ 10”) / Arm : 1.6 m (5’ 3”) / Bucket : 0.18m3 (0.24yd3) SAE heaped / Dozer blade up
Load radius At max. reach
Load point 1,850(6’ 1”)
2.0 m (7 ft) 3.0 m (10 ft) 4.0 m (13 ft) 5.0 m (16 ft) Capacity Reach
height
m (ft) m (ft )
5.0 m kg *960 880 4.47
(16 ft) lb *2120 1940 (14.7)
4.0 m kg *1020 *1020 760 650 5.26
(13 ft) lb *2250 *2250 1680 1430 (17.3)
3.0 m kg *1150 1010 810 690 650 550 5.69
(10 ft) lb *2540 2230 1790 1520 1430 1210 (18.7)
2.0 m
2,850(9’ 4”)
kg 1770 1510 1130 960 790 670 610 510 5.86
(7 ft) lb 3900 3330 2490 2120 1740 1480 1340 1120 (19.2)
1.0 m kg 1660 1410 1080 910 760 640 610 510 5.81
(3 ft) lb 3660 3110 2380 2010 1680 1410 1340 1120 (19.1)
Ground kg *2690 2630 1610 1360 1040 880 750 630 650 550 5.51 986(3’ 3”)
Line lb *5930 5800 3550 3000 2290 1940 1650 1390 1430 1210 (18.1) 308(12”)
-1.0 m kg 3210 2650 1600 1350 1040 870 790 660 4.92
(-3 ft) 7080 5840 3530 2980 2290 1920 1740 1460 (16.1)
2,100(6’ 11”)
lb 1,600(5’ 3”)
-2.0 m kg 3270 2700 1630 1380
(-7 ft) lb 7210 5950 3590 3040 6,100(20’ 0”) 1,925(6’ 4”)

Boom : 3.0m (9’ 10”) / Arm : 1.9 m (6’ 3”) / Bucket : 0.18m3 (0.24yd3) SAE heaped / Dozer blade down
Load radius At max. reach
Load point
2.0 m (7 ft) 3.0 m (10 ft) 4.0 m (13 ft) 5.0 m (16 ft) Capacity Reach
height
m (ft) m (ft )
R60W-9S WORKING RANGE
5.0 m kg *940 *940 *880 840 4.88
(16 ft) lb *2070 *2070 *1940 1850 (16.0)
4.0 m kg *910 650 5.60
(13 ft) lb *2010 1430 (18.4)
A
3.0 m kg *1010 *1010 *1010 770 *940 560 6.00 A’
(10 ft) lb *2230 *2230 *2230 1700 *2070 1230 (19.7)
2.0 m kg *3000 *3000 *1660 *1660 *1280 1080 *1120 750 *980 520 6.16 E
(7 ft) lb *6610 *6610 *3660 *3660 *2820 2380 *2470 1650 *2160 1150 (20.2)
1.0 m kg *1940 *1940 *2330 1590 *1580 1020 *1250 720 *1030 520 6.10
(3 ft) lb *4280 *4280 *5140 3510 *3480 2250 *2760 1590 *2270 1150 (20.0) F
Ground kg *2520 *2520 *2670 1520 *1770 980 *1330 700 *1070 560 5.83
Line lb *5560 *5560 *5890 3350 *3900 2160 *2930 1540 *2360 1230 (19.1) C
-1.0 m kg *3580 3000 *2660 1500 *1790 970 *1110 650 5.29
(-3 ft) lb *7890 6610 *5860 3310 *3950 2140 *2450 1430 (17.4) D
-2.0 m kg *3830 3050 *2290 1520 *1490 980 *1080 910 4.33
(-7 ft) lb *8440 6720 *5050 3350 *3280 2160 *2380 2010 (14.2)
-3.0 m kg *2070 *2070
(-10 ft) lb *4560 *4560

Boom : 3.0m (9’ 10”) / Arm : 1.9 m (6’ 3”) / Bucket : 0.18m3 (0.24yd3) SAE heaped / Dozer blade up B B’
Load radius At max. reach
Load point
2.0 m (7 ft) 3.0 m (10 ft) 4.0 m (13 ft) 5.0 m (16 ft) Capacity Reach
height
m (ft) m (ft )
5.0 m kg unit: mm(ft . in)
*940 *940 *880 760 4.88
(16 ft) lb *2070 *2070 *1940 1680 (16.0) Boom length 3,000 (9' 10")
4.0 m kg 690 580 5.60
(13 ft) lb 1520 1280 (18.4) Arm length 1,600 (5' 3") 1,900 (6' 3")
3.0 m kg *1010 *1010 810 690 600 500 6.00
A Max. digging reach 6,150 (20' 2") 6,430 (21' 1")
(10 ft) lb *2230 *2230 1790 1520 1320 1100 (19.7)
2.0 m kg *3000 2990 *1660 1540 1140 970 790 670 560 470 6.16 A' Max. digging reach on ground 5,980 (19' 7") 6,200 (20' 4")
(7 ft) lb *6610 6590 *3660 3400 2510 2140 1740 1480 1230 1040 (20.2)
B Max. digging depth 3,500 (11' 6") 3,800 (12' 6")
1.0 m kg *1940 *1940 1670 1420 1080 920 760 640 560 460 6.10
(3 ft) lb *4280 *4280 3680 3130 2380 2030 1680 1410 1230 1010 (20.0) B' Max. vertical wall digging depth 2,960 (9' 9") 3,160 (10' 4")
Ground kg *2520 *2520 1600 1350 1040 880 740 620 590 500 5.83
Line lb *5560 *5560 3530 2980 2290 1940 1630 1370 1300 1100 (19.1) C Max. digging height 6,070 (19' 11") 6,260 (20' 6")
-1.0 m kg 3160 2610 1580 1330 1020 860 690 580 5.29 D Max. dumping height 4,340 (14' 3") 4,530 (14'10")
(-3 ft) lb 6970 5750 3480 2930 2250 1900 1520 1280 (17.4)
-2.0 m kg 3210 2650 1600 1350 1040 870 960 810 4.33 E Min. swing radius 2,350 ( 7' 9") 2,350 ( 7' 9")
(-7 ft) lb 7080 5840 3530 2980 2290 1920 2120 1790 (14.2) F Tail swing radius 1,650 ( 5' 5") 1,650 ( 5' 5")
-3.0 m kg *2070 *2070
(-10 ft) lb *4560 *4560

1. Lifting capacity is based on SAE J1097, ISO 10567. 3. The load point is a hook located on the back of the bucket.
2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with 4. (*) indicates the load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.

10/11/12 13