Scribd
Upload
701 views1 page

Auto PPPoE Script

The document describes a script to automatically configure PPPoE clients and profiles on a MikroTik router. It defines variables for the client pool, bridge, and service before using a foreach loop to create multiple PPP profiles with different speed limits that are associated with the PPPoE service and client pool.

Uploaded by

teoven pajaroja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
701 views1 page

Auto PPPoE Script

The document describes a script to automatically configure PPPoE clients and profiles on a MikroTik router. It defines variables for the client pool, bridge, and service before using a foreach loop to create multiple PPP profiles with different speed limits that are associated with the PPPoE service and client pool.

Uploaded by

teoven pajaroja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
  • Auto PPPoE Script Overview

#=========================================================================

# Auto PPPoE Script


# by: RedFox INet / Wilfredo Intoy Escano
# GCash: 09177029868
# Tested: ROS 7.10 and 7.12
#=========================================================================
{
local apppclient "pppoe-clients"
local anetwork "20.0.0.1"
local arange "20.0.0.2-20.0.3.254"
local aservice "pppoe-server"
local abridge "PPPoE_HS"
local z 0

local alimit [toarray "5Mbps, 10Mbps, 15Mbps, 20Mbps, 25Mbps, 30Mbps, 35Mbps,
40Mbps, 45Mbps, 50Mbps, 100Mbps"]
local aspeed [toarray "5m/5m, 10m/10m, 15m/15m, 20m/20m, 25m/25m, 30m/30m,
35m/35m, 40m/40m, 45m/45m, 50m/50m, 100m/100m"]

if ([/interface bridge find name=$abridge]="") do={


/interface bridge add name=$abridge
}

if ([/ip pool find name=$apppclient]="") do={


/ip pool add name=$apppclient ranges=$arange
}

if ([/interface pppoe-server server find service-name=$aservice]="") do={


/interface pppoe-server server
add authentication=pap disabled=no interface=$abridge \
one-session-per-host=yes service-name=$aservice
}

foreach item in=$alimit do={


local arate [:pick $aspeed $z]
if ([/ppp profile find name =$item]="") do={
/ppp profile
add dns-server=8.8.8.8,1.1.1.1 local-address=$anetwork name=\
$item rate-limit=$arate remote-address=$apppclient
}
if ([/ppp secret find name=test]="") do={
/ppp secret
add name=test password=1234 profile=$item service=pppoe
}
set z ($z+1);
}

You might also like