Welcome to Engineering
Graphics-CAD (19MEE100) Lab
Projections of Planes
CSE
Name: M. Sathishkumar
Department of Mechanical Engineering
Problem No: 1
A square lamina ABCD of side 40 mm is perpendicular to HP and parallel to VP. Draw its
projections.
Problem No: 2
A square lamina of side 40 mm is perpendicular to VP and parallel to HP. Draw its projections.
Problem No: 3
A rectangular lamina of sides 30 mm x 40 is perpendicular to HP and inclined at 42˚ to VP.
Draw its projections.
Problem No: 4
A rectangular lamina of sides of 30 x 40 mm is perpendicular to HP and inclined at 42˚ to VP.
Draw its projections.
Problem No: 5
A rectangular lamina of sides of 30 x 40 mm is perpendicular to VP and inclined at 25˚ to HP.
Draw its projections.
Problem No: 6
A regular pentagonal plate of side 28 mm is placed with one side on HP such that the surface
is inclined at 45˚ to HP and perpendicular to VP. Draw its projections.
Problem No: 7
A pentagonal lamina of 40 mm side has a circular hole of 35 mm diameter in its center. The
plane stands on one of its sides on HP with its plane perpendicular to VP and 45˚ inclined to
HP. Draw the projections.
Problem No: 8
A thin circular metal plate of 48 mm diameter, having its plane vertical and inclined at 40˚ to
VP. Its center is 33 mm above HP and 25 mm in front of VP. Draw its projections.
Problem No: 9
A thin rectangular plate of sides 50 mm x 25 mm has its shorter side in the HP and inclined at
an angle of 30˚ to the VP. Project its front view when its top view is a perfect square of 25 mm
side.
Problem No: 10
A rectangular lamina of size 60 mm x 30 mm is seen as a square in the top view, when it rests
on one of its edges on HP and perpendicular to VP. Draw the projections of the lamina. Find
the true inclination of its surface with HP. Draw the front view of lamina when the edge about
which it is tilted, is inclined at 45˚ to VP.
Problem No: 11
A thin rectangular plate of sides 60 mm x 30 mm has its shorter side in VP and inclined at 30˚
to HP. Projects its top view, if its front view is a square of 30 mm long sides.
Problem No: 12
Draw the projections of a pentagonal sheet of 26 mm side, having its surface inclined at 30˚ to
VP. Its one side is parallel to VP and inclined at 45˚ to HP.
Problem No: 13
A hexagonal lamina of 26 mm side has a side resting on VP and inclined at 30˚ to HP. Its
surface is inclined at 45˚ to VP. Draw its projections.
Problem No: 14
A regular pentagonal lamina of 30 mm sides has on edge in HP and inclined at an angle of 30˚
to VP. Draw its projections when its surface is inclined at 45˚ to HP.
Problem No: 15
A thin 30-60 set-square has its longest edge in VP and inclined at 30˚ to HP. Its surface makes
45˚ with VP. Draw its projections.
