07/12/2017 Structural Analysis - I - - Unit 5 - Week 4
[email protected] ▼
Courses » Structural Analysis - I Announcements Course Forum Progress Mentor
Unit 5 - Week 4
Course
outline Week 4 Assignment 1
The due date for submitting this assignment has passed. Due on 2017-08-23, 23:59 IST.
How to access
the portal Submitted assignment
1) 1 point
Week 1 Calculate the deflection of beam at point C. E=200 GPa, I=8 x 106
Week 2 mm4.
Week 3
Week 4
Lecture 17:
Deflection of
Beams and
Frames
Lecture 18:
Deflection of
7.21 mm
Beams and 8.33 mm
Frames (Contd.)
9.56 mm
Lecture 19: 4.16 mm
Deflection of
Beams and No, the answer is incorrect.
Frames (Contd.) Score: 0
Lecture 20: Accepted Answers:
Deflection of 8.33 mm
Beams and
Frames (Contd.) 2) 1 point
Determine the slope at point A of the beam. E=200 GPa, I= 8 x 106
Lecture 21:
Deflection of mm4.
Beams and
Frames (Contd.)
Quiz : Week 4
Assignment 1
Feedback for
Week 4
Week 4:
Assignment 1
Solution
Week 5
6.25 x 10-3 rad
12.5 x 10-3 rad
Week 6
3.125 x 10-3 rad
Week 7 9.375 x 10-3 rad
Week 8
https://onlinecourses.nptel.ac.in/noc17_ce25/unit?unit=19&assessment=40 1/5
07/12/2017 Structural Analysis - I - - Unit 5 - Week 4
No, the answer is incorrect.
Week 9 Score: 0
Accepted Answers:
Week 10
6.25 x 10-3 rad
Week 11
3) Determine the deflection at the mid-point of the beam given in the 1 point
Week 12
below figure. E=200 GPa, I=8 x 106 mm4.
5.98 mm
1.50 mm
2.99 mm
4.50 mm
No, the answer is incorrect.
Score: 0
Accepted Answers:
2.99 mm
4) Determine the slope at point B of the beam given in the below figure. 1 point
E=200 GPa, I=8 x 106 mm4.
6.25 x 10-3 rad
3.125 x 10-3 rad
2.98 x 10-3 rad
0 rad
No, the answer is incorrect.
Score: 0
Accepted Answers:
3.125 x 10-3 rad
5) Find
the mid-span deflection (at point C) of the beam subjected to 5 1 point
kN/m uniformly distributed load (udl) over entire span (4 m) and a
concentrated load of 20 kN at the mid-span (point C). E=200 GPa, I=50 x 106
mm4.
https://onlinecourses.nptel.ac.in/noc17_ce25/unit?unit=19&assessment=40 2/5
07/12/2017 Structural Analysis - I - - Unit 5 - Week 4
4.33 mm
8.67 mm
0 mm
5.23 mm
No, the answer is incorrect.
Score: 0
Accepted Answers:
4.33 mm
6) Find the slope at point A of the beam given below. E=200 GPa, I=50 1 point
x 106 mm4.
3.33 x 10-3 rad
6.67 x 10-3 rad
1.36 x 10-3 rad
4.25 x 10-3 rad
No, the answer is incorrect.
Score: 0
Accepted Answers:
3.33 x 10-3 rad
7) Determine the deflection at point B of the cantilever beam. E=2001 point
GPa, I=100 x 106 mm4.
1.26 mm
5.16 mm
3.61 mm
2.53 mm
No, the answer is incorrect.
Score: 0
https://onlinecourses.nptel.ac.in/noc17_ce25/unit?unit=19&assessment=40 3/5
07/12/2017 Structural Analysis - I - - Unit 5 - Week 4
Accepted Answers:
2.53 mm
8) Determine the slope at point B of the cantilever beam. E=200 GPa, 1 point
I=100 x 106 mm4.
3.375 x 10-3 rad
0 rad
1.125 x 10-3 rad
2.5 x 10-3 rad
No, the answer is incorrect.
Score: 0
Accepted Answers:
1.125 x 10-3 rad
9) Determine the deflection and slope at point B of the cantilever beam. 1 point
E=200 GPa, I=100 x 106 mm4.
3.52 mm and 1.125 x 10-3 rad
3.52 mm and 3.375 x 10-3 rad
7.03 mm and 3.375 x 10-3 rad
7.03 mm and 1.125 x 10-3 rad
No, the answer is incorrect.
Score: 0
Accepted Answers:
7.03 mm and 3.375 x 10-3 rad
10)Determine the deflection and slope at point B of the cantilever beam 1 point
subjected to a concentrated load of 10 kN at the mid-span. E=200 GPa, I=100
x 106 mm4.
3.33 mm and 1.0 x 10-3 rad
https://onlinecourses.nptel.ac.in/noc17_ce25/unit?unit=19&assessment=40 4/5
07/12/2017 Structural Analysis - I - - Unit 5 - Week 4
3.33 mm and 4.0 x 10-3 rad
6.67 mm and 4.0 x 10-3 rad
6.67 mm and 1.0 x 10-3 rad
No, the answer is incorrect.
Score: 0
Accepted Answers:
3.33 mm and 1.0 x 10-3 rad
Rate this lesson:
Not at all Not very Somewhat Very useful Extremely
useful useful useful useful
Previous Page End
© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
A project of In association with
Funded by
Powered by
https://onlinecourses.nptel.ac.in/noc17_ce25/unit?unit=19&assessment=40 5/5
