55W Dual Output with Battery Charger(UPS Function) ADD-55 series

■
‧
‧
‧
‧
‧
‧
‧


■ 
 [Link]
Bauar t gepruft
Sicherheit
egel ma ge
od o s
be wac g

www. [Link]
ID 2000000000

SPECIFICATION UL62368-1 BS EN/EN62368-1 IEC62368-1 TPTC004

MODEL ADD-55A ADD-55B

OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3
DC VOLTAGE 13.8V 5V 13.4V 27.6V 5V 26.5V
RATED CURRENT 2.5A 3A 0.23A 1.3A 3A 0.16A
CURRENT RANGE 0 ~ 3.5A 0 ~ 4A -------- 0 ~ 2A 0 ~ 4A --------
RATED POWER 52.58W 55.12W
RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p -------- 150mVp-p 150mVp-p --------
OUTPUT
VOLTAGE ADJ. RANGE CH1: 12 ~ 14.5V CH1: 24 ~ 29V
VOLTAGE TOLERANCE Note.3 ±1.0% ±3.0% -------- ±1.0% ±3.0% --------
LINE REGULATION ±1.0% ±0.5% -------- ±1.0% ±0.5% --------
LOAD REGULATION ±1.0% ±0.5% -------- ±1.0% ±0.5% --------
SETUP, RISE TIME 800ms, 50ms/230VAC 1600ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.) 80ms/230VAC 16ms/115VAC at full load
VOLTAGE RANGE 88 ~ 264VAC 124 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 71% 74%
INPUT
AC CURRENT (Typ.) 1.6A/115VAC 1A/230VAC
INRUSH CURRENT (Typ.) COLD START 20A/115VAC 40A/230VAC
LEAKAGE CURRENT <1mA / 240VAC
105 ~ 150% rated output power
OVERLOAD Protection type : AC Charging Mode : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION UPS Mode : Protected by internal fuse
CH1:14.49 ~ 18.63V CH1:28.98 ~ 37.26V
OVER VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed
AC fail CN1 PIN2
FUNCTION DC ALARM SIGNAL(OPTIONAL) Battery low under charge voltage 82.5%±2% CN1 PIN1
Normal 0.8V max. Abnormal 5V±0.5V
WORKING TEMP. -10 ~ +60℃ (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃) on CH1 output
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
(Note 4) EMC EMISSION Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020
MTBF 2002.7K hrs min. Telcordia SR-332 (Bellcore) ; 373.8K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 159*97*38mm (L*W*H)
PACKING 0.57Kg; 24pcs/13.7Kg/0.83CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
NOTE
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.”
(as available on [Link] )
5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
※ Product Liability Disclaimer：For detailed information, please refer to [Link]

File Name:ADD-55-SPEC 2024-01-26

 55W Dual Output with Battery Charger(UPS Function) ADD-55 series

Mechanical Specification Case No. 901 Unit:mm

4.5 152.5
79.5

FAN
18.2CFM min.

10cm

7
3.5
1
2
8.25

65

3
4

84.5
97
5
3
6 2-M
6.5

7
8

.5
ψ3
4.5
24 78
159

6.5 150

Terminal Pin No. Assignment

9

9
18.5

Pin No. Assignment Pin No. Assignment

ψ3

1 AC/L 5 DC OUTPUT +V
3.5

3-
38
18

M3
.5

28.5

2 AC/N 6 BAT. +
3 FG 7 BAT.-/COM
4 DC OUTPUT COM 8 DC/DC OUTPUT +5V
22 117

fosc : 45KHz
BAT. CHARGER
Block Diagram & B+
BACK UP
SWITCHING
REGULATOR +5V
RECTIFIERS POWER RECTIFIERS +V
EMI
I/P & SWITCHING &
FILTER COM
FILTER FILTER

FG
PWM DETECTION
O.L.P.
CONTROL CIRCUIT

Derating Curve Static Characteristics (A)

14 5.2 300
100 +13.8V
OUTPUT RIPPLE (mVp-p)

13 5.0 250
OUTPUT VOLTAGE (V)

80 With 18.2CFM min.(10cm) +5V

12 4.8 200
70
60 11 4.6 150
50
LOAD (%)

NO FAN 10 4.4 100

40
9 4.2 +13.8V 50
20
8 4.0 25
+5V

-10 0 10 20 30 40 50 60 (HORIZONTAL) 60 80 100 120 140 160 180 200 220 240 264

AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (V) 60Hz

File Name:ADD-55-SPEC 2024-01-26