Check Valve
Hydraulic
1/4" FEMALE NPT, 10,000 PSI
Model 14KS30
The 14KS Check Valve is a two position, spring biased
poppet operated flow control device that permits Inlet to
Outlet flow only. Our Check or Flow Safety Valve (FSV)
prevents reverse pressure flow from Outlet to Inlet through
spring assisted poppet positioning.
Check Valves are of critical importance in high pressure,
hydraulic fluid operated control circuits that operate Surface
Safety Valves (SSV) and Subsurface Controlled Safety
Valves (SCSSV). Check Valves are also frequently used in
closed loop control circuits, process or production lines, down
stream of pumps and also in compressed air and gas
applications.
PARTS LIST:
1. Valve Body
2. Spring *
3. Valve Poppet
4. Kel-F Seat *
5. Inlet Retainer
* Indicates parts included in a Repair Kit
1420 Lakeside Parkway Tel: +1 (972) 446 8250
Suite 109 Fax: +1 (972) 446 8642
Flower Mound, Texas 75028 http://www.sigma-valves.com
Sigma Model Number 14KS30
CHECK VALVE, HYDRAULIC, 1/4" FEMALE NPT, 10,000 PSI
Product Specifications
Flow Control Application: Normally Open
Control Function: Directional Flow Control, Inlet to Outlet only
Pressure Rating Body: 10,000 PSI maximum (690 bar)
Seal Material: Kel-F Seat
Connection Size: 14KS30, 14KS31 - 1/4-18 Female N.P.T. Inlet and Outlet
14KS41, 14KS46 - 1/2-14 Female N.P.T. Inlet and Outlet
Wetted Component Material (Metal): 316 stainless steel and 17-4PH SS
Mounting: Field Mount (Standard)
Orifice: 14KS30 & 14KS31 = .86
14KS41 & 14KS46 = 1.62
Operating Temperature: -20° F to +250° F (-29° C to +121° C)
Overall Dimensions: 14KS30 & 14KS31 - 1-1/4 Hex x 3-1/2 Length (3.18 cm Hex x 8.89 cm Length)
14KS41 & 14KS46 - 1-3/4 Hex x 4-7/8 Length (4.45 cm Hex x 12.38 cm Length)
Pressure Equipment Directive (PED): This product conforms to the SEP Category of the European P.E.D.
Installation and Maintenance Instructions:
Install between two control devices insuring the flow direction is “Inlet” to “Outlet”. Sigma recommends the
use of appropriate thread sealant for each port connection.
Shelf Position Port Status
Inlet Instrument supply inlet pressure open to outlet port
Outlet Outlet to Inlet blocked (no reverse flow)
Repair Kit Information
Repair Kits contain all of the Seals and other components typically replaced when repairing the assembly.
In order to maintain optimum operating control function.
While this information is presented in good faith and believed to be accurate, Sigma Valves does not guarantee satisfactory results from reliance upon such information.
Nothing contained herein is to be constructed as a warranty or guarantee, expressed or implied, regarding the performance, merchantability, and fitness with respect to the
products. Sigma Valves reserves the right, without notice, to alter or improve the designs or specifications of the products described herein.
